Satellite Pro U200: MS Office Documents open slowly after installing BT stack

Similar Questions

• Satellite Pro L40-15 a - Sound Driver default after installing Windows XP

  Satellite Pro L40-15 has

  Just installed XP Professional 32, merged with drivers installation disk. Everything works bar the sound. When you run the Realtek driver, downloaded from the Toshiba site, runs almost to the end gives error install Realtek HD Audio Driver failure!

  Clues?

  Hi sail_free,

  Please use the forum search before starting a question. You can find a great number of discussions such as this one:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=58026

  He therefore remove the audio driver, install Service Pack 3, and then reinstall the audio driver.

  Check this box!

• Satellite Pro A200: Card reader does not work after installing XP

  Hello...

  I deleted Windows Vista from my Satellite Pro A200 for XP Home.
  I'm much happier with the machine now, but I am unable to get any response from the card reader. There is no mention in the manual supplied with the machine.
  I cannot find any reference to it in the Control Panel hardware Manager and nothing changes here in it when I insert a SD memory card.

  I had no cause to try the drive before removing Vista, so I don't know if it never worked... Although I guess he did.
  A search of a pilot running in the download section had no success, and this forum has no direct answers.

  Does anyone have an idea what I have to do to make this work?

  Mintin Popa.

  Hello

  I put t see serious reasons why your card reader shouldn't run with installed Windows XP t/function.
  What you need is the right driver.

  The Toshiba driver page provides all the drivers Win XP and there is also an XP driver for the multi card reader.

  You need a Texas Instruments Flash Media Driver. He is a driver for your bridge Media Slot.
  This slot allows you to insert an SD card, Memory Stick (Pro) or xD picture cards.

  See you soon

• I need the last CD of Microsoft Office - Satellite Pro U200-125

  I just bought Satellite Pro U200-125 without the last set of Microsoft Office CD. Does anyone have this CD?

  Thank you

  Musallam

  Hi Musallam

  Sorry, but what you mean with last Microsoft office defined? Office 2007 perhaps?

• Satellite Pro U200: My safe file does not open

  Hello
  Running XP Pro on a computer Satellite Pro U200, I have installed Norton Ghost 10 (after a lot of difficulties that I had to uninstall Norton anti-siphoning I've ever used on the machine).

  Subsequently the 'My Safe' folder does not open. Normally when double clicking it asks a fingerprint or a backup password but now it shows just an hourglass for a millisecond and then's there!

  Can anyone tell what he might have to get this service running the settings?
  Best regards, Robert

  Hey Buddy,

  may I ask what 'secure record' this is? This file has been accidentally created by Norton Protection System?
  So you have this fingerprint software which manages your fingerprint and your access in the system, etc., etc... ; have you checked if something in this software changed?
  A trial might reconfigure these programs.

  Welcome them

• Satellite Pro U200 - projector as external monitor

  I try to connect a projector as external monitor. I use a HDMI adapter, VGA, because the entry in the projector.

  If I use an old laptop, it works OK.
  If I use my Satellite Pro U200, Modelo PLUA1E-02301RSP, the display shows only the initial screen,

  I mean the landscape with the TOSHIBA logo, but it doesn't change.
  If, for example, I look at some photos as I have both monitors running, the portable computer I see the photo, but the projector doesn't change, it shows only the landscape and logo.

  What can I do?

  Thank you and best regards,

  Vicente

  I put t know if I understand you right but perhaps extended desktop enabled. You must disable this option in screen resolution settings.

  Can move you the open Office Windows laptops to the pic you is on the projector?

• CPU in Satellite Pro U200 temperatures are too high

  Hello

  I'm a little confused / concerned about the temperature of my CPU (Intel T7200) in my Satellite Pro U200-199. The confusing thing is that the case temperature is generally higher than that of the junctions of the two nuclei, which is the opposite of how it should be.

  Everyone knows this?

  As well, the case temperature is higher at seems reasonable, even in basic use. Basic use of office applications takes the temperature to 49 c, and then everything above that (opening an application for example) increases the temperature has high degrees of the years 50 or 60. Under a larger load, temperature (T-box) goes up to 65 C.

  One of the consequences is that the fan is on most of the time.

  I would like to know if there is a problem with the measurement of the temperature T-box is measured correctly, or if the processor overheats. If the measure is a fault, then do nothing about this? Like changing the BIOS?

  I should mention that the computer is only a week and has a BIOS update.

  Any ideas or help greatly appreciated.

  David

  Hello

  The temperature of 50-60 degrees is not unusual. But I wonder how you measure this temperature or what tools or utilities did you use?

  Usually the CPU is not only responsible for the temperature inside the laptop.
  The graphics card and HARD drive also produce heat which increases the temperature of the laptop.

  Anyway, the computer supports protection against overheating. This protects the laptop and parts from overheating.
  If the temperature reaches a critical threshold the laptop would be automatically stops down
  but it seems that the laptop works properly so in my opinion that you should not be worried. ;)

• Satellite Pro U200: unable to update BIOS to v.3.70 - WIN

  Model No.: Satellite Pro U200 PLUA1E
  OS: Vista Business SP2
  Current BIOS: v. 3.50

  Try to update the BIOS to v3.70

  When I run P0044v370, I get a Windows Script Host message:

  "Script:
  C:\ProgramData\Toshiba\Common\_cabBDF1.tmp\autoExe c.vbe
  Line: 2
  Char: 1
  Error: Failed to create object named 'WScript.Shell '.
  Code: 8007007E
  "Source: WScript.CreateObject".

  I want to update the BIOS before the upgrade from 1 GB to 4 GB of memory. Also my U200 Pro keeps crashing and whenever before it restarts, I get a message saying something like "try to install the latest version of the BIOS" (it is not on the screen very long sorry can't be more accurate).

  I don't have have the recovery CD, I'm trying to boost performance because it runs very slowly.

  Everything is - I am in your forum people good hands! Thanks in advance.

  You have what Windows OS installed.
  It is Win XP?

  Update the BIOS needs an installation of the common Modules, so don't forget not that the common Modules are installed or this software update.
  The CM is on the page of the European driver Toshiba

  In addition, the P0044v370.exe unpacks the package I recommend creating a folder on the desktop and to decompress the files in P0044v370.exe first. Then move to this new folder and run the exe file in the folder.

• Satellite Pro U200: WLan Hotkey Fn + F8 does not

  I can't the keyboard shortcut (Fn + F8) working on the Satellite Pro U200 wireless. It worked before, but after that I reinstalled the system and drivers, it no longer works. Any other combination Fn + FX work very well.

  If the wirelles (on the right side of the laptop) switch is off and you press Fn + F8, the system displays the following message: "wireless communication is disabled. Please activate the wireless communication switch. "If the wireless switch is enabled and you press Fn + F8, nothing happens (whereas before I was able to activate bluetooth and WiFi card and turn off).

  I don't know, but I suspect that the keyboard shortcut no longer works after update BIOS version 1.2 to version 1.3, but I can't confirm this, because I can't downgrade the BIOS and I reinstalled the system, shortly after the update of the BIOS. Do you have any ideas please?

  Thank you for your help,

  Jiri

  Hello

  It has worked before, because you used the preinstalled recovery image that contains all the necessary tools and utilities. If you install own OS please consult document instructions facilities and check if software list is missing. You can also use the Tools & Utilities CD and install all stuff on the left. This way you will have perfect configured unit.

  Anyway, check it please if you forgot to install Wireless Hotkey V2.0.0.6.

  Good bye

• How to disassemble the Satellite Pro U200

  Hello

  Lately, I have come to the need of the back opening of Toshiba Satellite Pro U200, you know the place where RAM and all the other stuff is stored.

  I have my tired to do it, but I could not open, so I was afraid to break something.

  Any of you know if it is possible to open the back of the laptop?

  If possible, it would be possible to close it later? :]]

  What you want to change on the laptop? The RAM?

  As far as I know the locations of memory are placed under the keyboard. Therefore, you must remove the keyboard stand and keyboard.
  It's a little tricky and if you n t have experience with this that you should ask a technician for laptop help.

• No sound after installing Windows 7 on Satellite Pro U200

  Hello

  I just installed Windows 7 Professional on my Satellite Pro U200 10 p.

  Available for XP Pro.

  Sound has stopped working since the new facility (which fromatting the drive - no partition) and can not find a solution. The v6.10.1.6000 of SoundMAX Integrated Digittal HD Audio Driver is installed. I uninstalled and reinstalled several times, but this doesn't seem to be the right driver. I can't find info to tell me what the correct driver can be either. The Toshiba site is a little sparse on Windows 7 drivers for this model and gives no indication that the driver may be is.

  Windows 7 does not think that there is a problem and some reports that "this device works properly." in speaker properties > Configuration information dialog box. However not coming out, the speakers or the 3.5 mm jack

  Anyone got any ideas?

  Thank you

  James

  Hello

  Go to Device Manager and check what sound chip you have exactly:

  Use this statement:
  [How to identify an unknown device? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78]

  Then you should be able to find a good pilot.
  I also recommend remove/delete the sound card in Device Manager.
  Just select the audio remove card and press on, and then restart the laptop

  PS: Are you sure that the sound is not muted? Please check this too!

• Satellite Pro U200 - how to access the BIOS?

  Hello

  HOWTO access / enter in the setup of the BIOS of Satellite Pro U200-PLUA1E-02802QS4?

  Hello

  I checked the forum and you should try to press the ESC key.

  It work? ;)

  Welcome them

• Upgrade SSD on Satellite Pro U200

  Hello!

  I have a laptop (Satellite Pro U200-PLUA1E-00X007HU of the v3.70 win7 32-bit bios), I want to upgrade with a series of Samsung 830 64 GB SSD. I read that the SSD need AHCI mode. My laptop supports AHCI mode? What can I change in the bios before installing the new storage?

  Thanks for the help!

  Robert

  Hello

  I see you're confused
  First, he must know that the laptop supports the SATA controller.
  This means that you must use hard drives SATA or SATA SSD.

  Second: AHCI means SATA some BIOS supports only a SATA mode, and you can switch between compatible (IDE) mode and AHCI (SATA) mode.

  If this switch is not available in the BIOS mode is always set to AHCI.

  However, to SSD drive question:
  I put t really no problem using an SSD.
  It must function as the SATA controller support

• Satellite Pro U200 - DC jack is broken

  Hello everyone

  I was wondering if you guys can help me because I broke the dc jack on my laptop, its load only when the pin of the charger is in it at a certain angle and I can actually feel the plug into my laptop so moving is not the charger. I tried searching on the internet but without success because I don't know the part number, and even if I put the serial number on the website of his not really give me the part number and may cause toshiba do more :(
  Now I'm looking for power supply for Satellite Pro U200-199
  Part number: PLUA1E-01900JEN
  Main features
  -Technology Intel® Centrino® Duo Mobile with Intel® Core 2 Duo processor T7200
  -Windows XP® Professional
  -100 GB hard drive
  -1 024 (512 + 512) MB of RAM DDR2 (533 MHz)
  -12.1 "screen Toshiba TruBrite® WXGA TFT
  -Drive DVD Super Multi (Double Layer) slim

  Any help would be greatly appreciated. only thing, I had an experience at the hardware level, but not very good with soldering, should weld or not it comes with the wire that can be clicked into place.

  Thank you

  In the past, I found several threads where people have reported the same issue but on the different model of laptop. Obviously some of them have done a good job and repaired only.
  To find the DC jack is not a problem.

  You can find it on eBay and it is cheap. Put in google DC jack U200 and you will find it.

  Problem is that any computer laptop must be disassembled and new connector soldered to the right place.
  Can you do this?
  I want to say if you n t have experience with this stuff don t touch anything and ask for professional help.

• Satellite Pro U200 - no sound after installing Windows 7

  Hello

  I have a problem with sound after installing Windows 7 on a (PLUA1E) satellite Pro U200. No Win7 audio driver available on the Nordic pilot site. Help, please.

  G.Magnason

  Hey Buddy,

  Have you already checked the site Web of Toshiba itself?
  http://EU.computers.Toshiba-Europe.com

  I found a driver for Vista 32 bit and Vista drivers most also work on Windows 7 so it s worth a try! :)