Satellite Pro U200 - speakers not working not

Similar Questions

• Satellite Pro U200: VGA output works not properly when the AC adapter / CC has been connected

  Hello

  I have a problem with vga output. When I'm working on the battery and connect my laptop to external monitor is ok, but when I connect adapter then start waving also bluetooth and wlan is not working properly. In other cases when I disconnect laptop battery and connect the AC adapter it works correctly.

  Thanks in advance

  Hello

  Can you please describe more precisely what is happening here? Does not properly is a rather general statement.

• Satellite Pro U200-10I: DVD UJ-850 s player not working - corrupt/lack of pilot

  Hello

  I just bought my new laptop Satellite Pro U200-10I. The DVD doesn't seem to work at all. It is said, Mat * a s DVD UJ-850 drive not working - corrupt/lack of driver. Help, please.

  Appreciate your response. Thank you!

  BAHI

  Hello

  The CD/DVD drive using the Microsoft diver who is included in the Windows operating system.
  According to this page or some registry keys are corrupt windows clean driver failures.

  I think that you must first access the Device Manager and check if the CD/DVD drive is displayed correctly.
  If you do not see a yellow exclamation I recommend to remove the drive from Device Manager and reboot the laptop.

  After restarting again the OS should recognize the new device (CD/DVD drive) and should implement the drivers again.
  Finally start the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  and restart the device.

  Good luck

• Satellite Pro U200 - FN keys do not work

  Hello

  I have a Toshiba Satellite Pro U200 with Windows Xp Prof

  My problem is that the Fn shortcut keys do not work.
  Help, please.

  Hello

  The FN keys should work after install Toshiba common Modules.
  Depending on your other threads you have not installed the common Modules on this laptop and I assume that this is the reason why don t FN keys work properly.

  The solution is simply.
  -Go to the page of the European driver Toshiba
  -Choose your laptop computer and downloaded and install the common modules

  Welcome them

• USB mouse will not be in service to initialize the top when used through Dynadock on Satellite Pro U200

  The USB mouse not is won't boot on initialize top when used through Dynadock on Satellite Pro U200. If the mouse is reinstalled on the Dynadock it works fine. I use a Kensington Valuoptical USB mouse. I tried the alternative kensington mouse and had the same problem. Can someone tell how to fix this?

  Hi Jeremy

  Unfortunately I don't have a solution to your problem, but it can also be a technical limitation. I'm also interesting to buy this docking station and I would like to know if there is the same problem with memory external HDD or USB sticks.

• Upgrade can not display drivers - Satellite Pro U200-10J

  Hi all

  I recently received a Satellite Pro U200, which I am very satisfied so far.

  My current display drivers are the 7.14.10.1147 of the 945GM Express chipset Intel. The new drivers that have been added to the drivers on the Toshiba site list 17 and are the 7.14.10.1227. Unfortunately, they install! I get a message just after the initialization of configuration that these drivers are not the most appropriate for this laptop and it closed facility. When I try to update the Device Manager, it simply tells me that I already have the latest drivers for my machine.

  Please notify; p

  Hello

  Before you start installing the new driver remove the old. You can do this in the properties of the device in Device Manager.

  I did it with my Vista preinstalled Satellite A200 (also with the Intel graphics card).

• The product key on my Satellite Pro P300 does not work

  The product key on my Satellite Pro P300 does not work.
  I entered the key from the sticker on the back of the computer. What I am doing wrong?

  Hello

  Why use this product key?

  Firstly the Toshiba recovery image is already enabled and you don t need this key more activations.

  Second, it's an OEM key and it will not work with other versions of Vista!

  Cheers mate

• Satellite Pro U200: My safe file does not open

  Hello
  Running XP Pro on a computer Satellite Pro U200, I have installed Norton Ghost 10 (after a lot of difficulties that I had to uninstall Norton anti-siphoning I've ever used on the machine).

  Subsequently the 'My Safe' folder does not open. Normally when double clicking it asks a fingerprint or a backup password but now it shows just an hourglass for a millisecond and then's there!

  Can anyone tell what he might have to get this service running the settings?
  Best regards, Robert

  Hey Buddy,

  may I ask what 'secure record' this is? This file has been accidentally created by Norton Protection System?
  So you have this fingerprint software which manages your fingerprint and your access in the system, etc., etc... ; have you checked if something in this software changed?
  A trial might reconfigure these programs.

  Welcome them

• Satellite Pro U200: update BIOS - Toshiba common Modules is not installed

  Hello

  When I install update of the BIOS P0044v370 I have an error "Toshiba Common Modules is not installed.

  My laptop Toshiba Satellite Pro U200 with Windows XP Prof

  Pleas help me

  PS. I Don t have a Toshiba Recovery disk

  The message is pretty clear!
  The common Module is not installed and therefore you can not update the BIOS.

  Visit pilot European Toshiba, download the common Modules for Win XP and install it.
  Then you should be able to update the BIOS.

  Concerning

• Satellite Pro U200: WLan Hotkey Fn + F8 does not

  I can't the keyboard shortcut (Fn + F8) working on the Satellite Pro U200 wireless. It worked before, but after that I reinstalled the system and drivers, it no longer works. Any other combination Fn + FX work very well.

  If the wirelles (on the right side of the laptop) switch is off and you press Fn + F8, the system displays the following message: "wireless communication is disabled. Please activate the wireless communication switch. "If the wireless switch is enabled and you press Fn + F8, nothing happens (whereas before I was able to activate bluetooth and WiFi card and turn off).

  I don't know, but I suspect that the keyboard shortcut no longer works after update BIOS version 1.2 to version 1.3, but I can't confirm this, because I can't downgrade the BIOS and I reinstalled the system, shortly after the update of the BIOS. Do you have any ideas please?

  Thank you for your help,

  Jiri

  Hello

  It has worked before, because you used the preinstalled recovery image that contains all the necessary tools and utilities. If you install own OS please consult document instructions facilities and check if software list is missing. You can also use the Tools & Utilities CD and install all stuff on the left. This way you will have perfect configured unit.

  Anyway, check it please if you forgot to install Wireless Hotkey V2.0.0.6.

  Good bye

• Satellite Pro 4230 - does not light

  Hello
  I have the following problem:

  A Satellite Pro 4320 will not feed, DC-in light is on (green), with inserted (quite old) battery, the quickly flashes orange, (charge of compensation, according to manual) battery. If I press the power button / stop, DC-In goes off for half a second and turns on, that of all, nothing else happens.
  The power supply is 15V 4Amps one correct, I load tested it works and provides all the power, according to the specifications. It does not matter if the battery is inserted or not.

  Now the question: is this a battery problem or there is a problem with the entrails of laptops (internal DC converter)? Normally, your laptop should work on the included power supply.

  Best regards
  Nohab.

  Hey,.

  > Normally a laptop should work on the included power supply.
  You're absolutely right, mate. All cell phones work with power supply only, theoretically, a battery is not necessary. That's only important if you want to work without power, otherwise laptop mobile working with power supply only. No battery is needed.

  So my personal opinion it of a card mother dysfunction :(

• Satellite Pro 4260DVD does not detect WLAN CardBus

  Hello

  I had a problem with my Satellite Pro 4200 PCMCIA, which worked very well with 2 cards different Ethernet but when I tried to use the WLAN, it could recognize only a SMC EZ Connect 2.4 GHz 11 Mbps Wireless Cardbus Adapter (SMC2635W). I'm now running on XP Service Pack 2 and the big question mark is that XP didn't detect all other cards except the SMC a WLAN.

  I tried the Linksys Wireless-B 2.4 GHz 802. 11B (WPC11 ver.4) and the generic IEEE802.11b WLAN CardBus card 2.4 GHz/11 Mbps but XP has not yet detected the card. The power of the map light was off and blinked only one time that when I plug. Both cards worked great on my old friend laptop IBM, which is finally older than my laptop. I bought this laptop 6 years ago and never had any problems with the front PCMCIA.

  I have worked on this issue with my friend for about a week and we have no idea if this is a hardware or software problem. I first thought that it might be the PCMCIA 16 bits problem but I think that the SMC card is also not the 16 a bit. I did update the BIOS but I don't think it will make all the differences, if I did. Please help me solve this problem that I'm dying to know what really happened. Thank you!

  See you soon,.
  TR

  Hello

  Well, the 4200 Pro Satellite does not for me but I found something on the Sat Pro 4220. This laptop supports PC - Card16 - bit PCMCIA and CardBus 32-bit (2 x PCMCIA type II) or 1 x PCMCIA type III
  In this case I don't think that it? s a matter of 16 bits.

  What you can do is to try to change the settings in the BIOS.
  In the "configuration" box, you can set the configuration of the device to "devices".
  In addition, in the "PC card" box, you can change the mode of the controller "CCIP compatible" or ' cardbus/16-bit' or 'automatic selection '.

  Try all the settings. Maybe one of them will be working.

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• Satellite Pro C660 does not illuminate

  Satellite Pro C660 does not illuminate. no noise, no light just fill out the dead.

  any suggestions?

  Hello

  On this virtual path, it is not possible to provide an accurate diagnosis. All you can do is to unplug the power plug, remove the battery and leave it for a while. Then press the power button and hold it for 15 or 20 seconds.
  After doing this connect the power running and try to start again.

  What happens when you do this?