Satellite Pro U200: unable to update BIOS to v.3.70 - WIN

Similar Questions

• Satellite Pro L10: Unable to update BIOS

  Hello, I tried (three times) to update my BIOS using the Windows version, but everytime I try, it fails and sends a report to Microsoft - anyone know what is the problem and how to fix it?

  Hello

  First of all he must know that if you use the bad BIOS or bad BIOS update procedure, can damage the laptop (motherboard)
  I checked the Toshiba page and it seems that, currently, the BIOS release is 25/04/06 - version 2.6

  Please check this BIOS FAQ document:
  IOS http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?z=234&service=eu&from=faq_selection&CFID=B & FID = TRO0000000b07

  You can find the BIOS update.
  According to this document, you must use the traditional update of the BIOS (BIOS upgrade procedure 2).

• Satellite Pro L300: BSOD after updating BIOS

  Hello

  After updating the Bios of the Satellite Pro L300, windows will not start!
  His show the blue screen of death!

  What can I do?

  Hello

  You are able to access the BIOS settings?
  I m not very well why this BSOD appears, but eventually the SATA mode settings have been changed after the BIOS update

  Usually the SATA mode must be on AHCI if the SATA drivers are installed.
  But if the SATA drivers are not included the SATA mode must be set to compatible.

  Please check this!

  In addition, you could set the BIOS default settings and may try to start the computer again.

• Satellite Pro A300 (PSAG9E) - after updating BIOS Windows will not start

  Restart went well after update BIOS and Windows XP logo appears loads for a few seconds then a beep and restart - last good known or start Windows normally same effect.
  Reboot back to start - this is a new laptop - using the BIOS of Toshiba s official download site.

  Quite annoyed to try to find a way to upgrade or downgrade the BIOS.
  Took battery and RAM to see if I can delete it?

  Any ideas anyone?

  I think you mean BIOS * update * and do not upgrade ;)
  An upgrade is not possible

  However, you can try to remove the battery and the AC adapter and wait an hour. After that, reconnect the battery and the AC adapter and try to start Windows.
  Moreover I would load the default settings in the BIOS before starting Windows.

  If it doesn't work, it seems that your ROM module needs to be reflashed. In this case an ASP can help you.

• Satellite Pro L40 PSL43E: How update BIOS

  Hello

  I hope someone can help please?

  My Sat Pro L40 was entering into an infinite loop of BSOD, and I think I This reduces up to an update of the BIOS that I need.

  I downloaded the correct one for my laptop model: PSL43E.

  I saved on the desktop and extract the files to a folder on the desktop.

  The instructions on this site say run the *.exe file

  I see only 2; that which is a small file winflash.exe.manifest and the winflash (and has an icon of chip next to him) to research in the properties of this file, it says it's an .exe file so I tried to run it.

  File pos up to with the "is it the right of a warning" I click ok and about 15 seconds later, a box appears looking for a file name and in the name of box says "here for the Fill bios image file.

  I'm at a loss what to do next because I can't get the update of the BIOS works properly.

  The laptop opens in safe mode on a user account inactive that I've never used (it does not open in safe mode in my own user account and enter the BSOD loop).

  Help, please!

  Great tips Maurice! ;)

• Satellite Pro U200: update BIOS - Toshiba common Modules is not installed

  Hello

  When I install update of the BIOS P0044v370 I have an error "Toshiba Common Modules is not installed.

  My laptop Toshiba Satellite Pro U200 with Windows XP Prof

  Pleas help me

  PS. I Don t have a Toshiba Recovery disk

  The message is pretty clear!
  The common Module is not installed and therefore you can not update the BIOS.

  Visit pilot European Toshiba, download the common Modules for Win XP and install it.
  Then you should be able to update the BIOS.

  Concerning

• Updated BIOS for Satellite Pro U200?

  Hello

  does anyone have any experience with BIOS version 1.3 for Satellite Pro U200? I've upgraded to this version of the BIOS and have had several problems since then - shortened wireless keyboard does not and display the overflowing of installation brightness to name two.

  In addition, as I noticed last week, upgrading the BIOS can not be downloaded more and there is no alternative - just says download page don't: "no BIOS upgrade for this product! Is there anyone that has 1.2 BIOS so that I can try to downgrade to this version?

  What is your experience with BIOS 1.3?

  Hello

  It s really strange?  :|
  I checked the BIOS for Satellite U200 and Satellite Pro U200 download section, but I put t found any BIOS download at this time.

  A few years ago the authorized service provider has installed an older version of the BIOS on my Tecra friends unit.
  I guess that he should be able to do it on your Satellite Pro U200.
  The other possibility is to wait for a newer version of the BIOS.

• Satellite Pro U200 - how to access the BIOS?

  Hello

  HOWTO access / enter in the setup of the BIOS of Satellite Pro U200-PLUA1E-02802QS4?

  Hello

  I checked the forum and you should try to press the ESC key.

  It work? ;)

  Welcome them

• Satellite Pro U200: Display Resolution changed to 1024 x 768, after sleep (Vista)

  I have some problems with my Satellite Pro U200 (WinVista, BIOS 3.50, Display Driver 7.14.10.1217).

  After the exit mode standby, the display shows the correct resoluion of 1280 x 800 for a second and then goes to 1024 x 768. It's very annoying.

  I tried to uninstall / reinstall the display driver, but it did not help.

  Does anyone have an idea?

  Well, I remember a similar problem happened on U200 with Windows XP and Windows XP MCE.
  The update of the graphics to the version 6.14.10.4543 driver has solved this strange switching

  Maybe the next update of the graphics card driver will clear this issue

• Satellite Pro U200: WLan Hotkey Fn + F8 does not

  I can't the keyboard shortcut (Fn + F8) working on the Satellite Pro U200 wireless. It worked before, but after that I reinstalled the system and drivers, it no longer works. Any other combination Fn + FX work very well.

  If the wirelles (on the right side of the laptop) switch is off and you press Fn + F8, the system displays the following message: "wireless communication is disabled. Please activate the wireless communication switch. "If the wireless switch is enabled and you press Fn + F8, nothing happens (whereas before I was able to activate bluetooth and WiFi card and turn off).

  I don't know, but I suspect that the keyboard shortcut no longer works after update BIOS version 1.2 to version 1.3, but I can't confirm this, because I can't downgrade the BIOS and I reinstalled the system, shortly after the update of the BIOS. Do you have any ideas please?

  Thank you for your help,

  Jiri

  Hello

  It has worked before, because you used the preinstalled recovery image that contains all the necessary tools and utilities. If you install own OS please consult document instructions facilities and check if software list is missing. You can also use the Tools & Utilities CD and install all stuff on the left. This way you will have perfect configured unit.

  Anyway, check it please if you forgot to install Wireless Hotkey V2.0.0.6.

  Good bye

• Satellite Pro U200-> black screen after startup

  Hello

  It happens from time to time when I try to start my PLUA1E Satellite Pro U200-02802QS4, then I get a black screen even from the BIOS.
  What is wrong and how to fix this?

  BTW, I already have this BIOS version: P0044v370.exe installed.

  Hello

  This happens from time to time?
  This means that you can not reproduce this problem?

  Hmm that's not easy to say what the issue might be.
  Maybe the BIOS update will help you at the moment you can find BIOS 3, 7 victory on the European driver Toshiba page.
  If you have a lower BIOS version installed, then I recommend an update.

  It is also possible that this problem is related to some of the material; motherboard, screen, etc.
  In this case the part should be replaced but first of all it of necessary to know what part is affected and I think that the technician of the ASP for this

  What do you think???

• CPU in Satellite Pro U200 temperatures are too high

  Hello

  I'm a little confused / concerned about the temperature of my CPU (Intel T7200) in my Satellite Pro U200-199. The confusing thing is that the case temperature is generally higher than that of the junctions of the two nuclei, which is the opposite of how it should be.

  Everyone knows this?

  As well, the case temperature is higher at seems reasonable, even in basic use. Basic use of office applications takes the temperature to 49 c, and then everything above that (opening an application for example) increases the temperature has high degrees of the years 50 or 60. Under a larger load, temperature (T-box) goes up to 65 C.

  One of the consequences is that the fan is on most of the time.

  I would like to know if there is a problem with the measurement of the temperature T-box is measured correctly, or if the processor overheats. If the measure is a fault, then do nothing about this? Like changing the BIOS?

  I should mention that the computer is only a week and has a BIOS update.

  Any ideas or help greatly appreciated.

  David

  Hello

  The temperature of 50-60 degrees is not unusual. But I wonder how you measure this temperature or what tools or utilities did you use?

  Usually the CPU is not only responsible for the temperature inside the laptop.
  The graphics card and HARD drive also produce heat which increases the temperature of the laptop.

  Anyway, the computer supports protection against overheating. This protects the laptop and parts from overheating.
  If the temperature reaches a critical threshold the laptop would be automatically stops down
  but it seems that the laptop works properly so in my opinion that you should not be worried. ;)

• Upgrade SSD on Satellite Pro U200

  Hello!

  I have a laptop (Satellite Pro U200-PLUA1E-00X007HU of the v3.70 win7 32-bit bios), I want to upgrade with a series of Samsung 830 64 GB SSD. I read that the SSD need AHCI mode. My laptop supports AHCI mode? What can I change in the bios before installing the new storage?

  Thanks for the help!

  Robert

  Hello

  I see you're confused
  First, he must know that the laptop supports the SATA controller.
  This means that you must use hard drives SATA or SATA SSD.

  Second: AHCI means SATA some BIOS supports only a SATA mode, and you can switch between compatible (IDE) mode and AHCI (SATA) mode.

  If this switch is not available in the BIOS mode is always set to AHCI.

  However, to SSD drive question:
  I put t really no problem using an SSD.
  It must function as the SATA controller support

• Satellite Pro U200-10I - how to disable the system at startup control upward?

  : x Hi,.

  I have Toshiba Satellite Pro U200-10I and I want to disable the control system, as it is a long time to start machine. Is there a way to Devil who?

  Nedd your help! : D

  Hello

  Just checking the system do you mean exactly?
  Is this based on Windows or BIOS based?

  If you mean the ScanDisk in Windows startup you can disable it in the registry:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Session Manager
  Change the BootExecute entry to: autocheck autochk *.

  After that restart the ScanDisk is disabled and doesn't appear at Windows startup.

• Satellite Pro U200 - no noise, no brightness

  Hi how are you?

  I hope that you will be able to help me with a problem that is me not wanting to use my U200 to all leave.

  I've had the Satellite Pro U200 since a few months now & to be honest, just used it for the last 2 months. The reason is that the sound no longer works & the "upward brightness / brightness drop ' feature has stopped working."

  Here is what happened: I had a virus that was like Norton & installed a couple of other virus and Trojan horses. I managed to get rid of this, but has since not worked its brightness.

  I went through all the stuff help & diagnostics, and everything seems fine. The sound is supposed to come through the "Soundmax HD Audio" device, but there is no sound. When I check it I get 'this device is functioning. When I try to update the drivers, they are perfectly up-to-date. My volume is sufficiently complete.

  Can you suggest a potential cause / fix for this?

  To be honest, I tried everything and am at the end of the road, & think just completely reinstall the machine. Is it possible to reset to original settings? (I know PCs often have this ability).

  Thanks for your help!

  Daniel

  To be honest ;) I agree with Sylvain.
  The restore CD contains the operating system preinstalled with all the drivers, tools and utilities.
  Using the recovery CD you with redefine the laptop to factory settings.
  Then everything will work as should.

  But note; the recovery CD will format the HARD drive. If necessary, back up you data!