Satellite Pro U300 and XP - driver VGA update problem

Similar Questions

• Re: Satellite PRO 4600 and WLAN driver

  My old Satellite Pro 4600 connects with networks wireless unsecured very well but has a problem with WEP - Gets an error message immediately to connect command, never reaches the authentication dialog.

  I would try to update the drivers of wifi card, but where can I find them? This site does not recognize not my serial number.

  Can someone please?

  Thank you.

  -Kari-

  This along with the serial number reorganization probably works with new laptops only.
  Go directly to the download section Toshiba > http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp and under archive try to find your model of laptop and WLAN driver.

• Satellite Pro L20 and DVD drive upgrade

  Hi all, starting at this forum.

  Satellite Pro L20

  I just upgraded the drive cd - rw to a dvd - rw drive. The drive came a host of work so it s in full working order. The drive is not recognized as a DVD player, but works like a cd - rw. Update the BIOS of the Toshiba site gives an error once decompressed.
  Does anyone know what I need to do to get it work correctly?

  Thanks for your help

  This new optical disk drive is compatible with this model of laptop?

• Satellite Pro U300: Low resolution on external LCD screen and a station

  I've got Satellite Pro U300 and LCD HP1907v and PA3542E-2PRP - docking station.

  When I connect external LCD for laptop - resolution is OK (1440 x 900). But when I connect the external LCD display in a docking station - the resolution is lower(), I can't change it, and I don't have some display options under Fn + F5 (that I had when I passed this lcd directly to the laptop).

  Help me find a solution, please!

  Yes. Latest Dynadock software must be installed.
  I checked the hardware specifications of the dynadock with DVI-d port and DVI supports a maximum external resolution UXGA (1,600 x 1,200) 24-bit.

• Satellite Pro U300 shows "Unmountable_Boot_Volume" message

  I hope someone can help me...

  I have a Satellite Pro U300 and recently she comes with a stop with the message Unmountable_Boot_Volume error screen.

  Starting the machine, told me that windows did not start properly due to a problem of HW or SW. I gives me the options to start windows normally, go back to the last good configuration known or open in safe mode, however all these lead to the error message Unmountable_Boot_Volume.

  I am responsible to ensure that all new HW or SW is installed correctly and disable them if necessary. However, I have not installed anything recently and the computer was working fine.

  The error message appears for 4 seconds, and then the computer restarts and appears with the same startup message and continues in this circle reboot after each stop error message.

  I'm not a computer whizz as you probably can, but I would be very happy if someone knows what happened to my computer!

  Sometimes the file system can get damaged due to power outages or viruses or bad RAM.

  First of all, you should check the disk for bad sectors. Run the test Advanced in DFT (it is a bootable CD or a floppy disk):
  http://www.HitachiGST.com/HDD/support/download.htm#DFT

  Then, try to fix the file system by plugging the drive on another PC using a USB 2.5 "SATA HDD adapter. Run CHKDSK on the drive.

  If this does not work, you can try to repair Windows by going to the Recovery Options in the Windows Start Menu (press F8 before Windows starts).

• Satellite Pro U300: Battery LED indicates low power using Linux

  Hello

  I have Satellite Pro U300 and I'm using Linux.
  I have a problem of opinion on my PC, it does not indicate that the battery is low (without flashing) and lights out.

  What this indicator a software driven or it's a hardware problem on my laptop?

  Another small problem that was Watch not remember brightness for battery mode.

  Thank you

  Hello

  > I notice a problem on my PC, it does not indicate that the battery is low (without flashing) and lights out. What this indicator a software driven or it's a hardware problem on my laptop?
  > Another small problem that was Watch not remember brightness for battery mode.

  Please don't be angry with me, but first I would not talk about problems if you use Linux on the Toshiba laptop. Is that Linux is not supported and that's why some features of laptops may not work properly.

  About the light battery;
  The LEDs are controlled by the BIOS. As you know the laptop was running Vista and so the BIOS support for Vista.
  As I said above, if you use another OS like XP or possibly Linux so some features may not work properly.

• Satellite Pro U300 problem of monitor/projector ext.

  I shared the use of a Satellite Pro U300 and someone has messed with the settings I think. When connected to a projector and selecting Monitor 2 1 & 2 or just all get them is the default display of the blue projector. If I turn on monitor 2 what I get is an image of the desktop background but no program. What parameters are likely to have been messed up?

  Option extend the desktop to this monitor in display settings is enabled?
  If so, clear the check box and use the FN + F5 key combination to switch to projector only.

• Can not install the latest driver from Intel on my Satellite Pro U300-10 display

  Hello

  Intel has recently, a new display driver, which I think is useful to me because it won't let me play games that require:
  Pixel Shader PS1.1
  Vertex Shader VS 1.0
  "Act of war" and others.

  The pilot is the revision of the pilot: 15.12.4.1666, March 5, 2009
  It is supossed to be the latest driver for the video card U300: MOBILE INTEL 965 Express chipset family.

  The problem is that when I try to install, I have an error that says: "not for this system, ask your provider manufacturer.

  How can I install or where I could find the solution?

  I have TOSHIBA Satellite Pro U300-10 with Windows Vista Business 32.
  MOBILE INTEL 965 Express chipset family
  MOBILE INTEL GMA X 3100

  Thank you much in advance.

  DCARL

  Drivers designed for laptops are changed and adapted to provide performance fairly, but not to force a graphics card to run on the limit. As you probably know there are big difference between office and mobile graphics cards.

  Desktop graphics cards have no limits with cooling and drivers can be updated very often. Design of portable computers is completely different and all hardware components are placed on the square. The common problem with laptops is to design the system of cooling, small but effective.
  Because of all these reasons, display drivers must be tested and adapted by the laptop manufacturers. The main point is to protect the material. The same situation is with other manufacturers of graphics card. They don't offer drivers for laptops.

  If your graphics card will blow that will be responsible for this Toshiba or Intel?

  By the way: Satellite Pro U300 is for me a laptop of small business and certainly not designed for games. Do you agree with me?

• Satellite Pro U300 BIOS update BACK

  Anyone know if I can upgrade the BIOS of my Satellite Pro u300 from a floppy boot BACK, or another way to do an update without Windows? The downloaded utility seems to work only in Windows, I do not use.

  I tried to launch a live Windows CD (BartPE and Ultimate boot CD) but it does not start or shows no graphics.

  I have problems with some hardware and hopes that an update of the BIOS.

  Thank you.

  No, you can not day BACK because Toshiba driver BIOS European page provides only the version of the BIOS win.

  For an update of the BIOS BACK you would need an update of the special BIOS that is not published on the page and is available for Toshiba technicians!

• Satellite Pro U300 (PSU31E) standby & hibernation fails after updating BIOS

  Hello

  I wonder if it is common that after the upgrade of the Satellite Pro U300 (PSU31E) of the BIOS 2.50 at BIOS 3, 70 - Win or 3, 90 - Win, do sleep modes and Hibernate the * completely locked laptop computer? *

  After the upgrade, when I try to enter sleep or hibernation, the laptop turns off the LCD and gets locked so it isn't help to press and hold the power button, open/close the cover, press Fn - F3 or F4 - Fn, the only way is to disconnect the power supply and wait until the battery runs down, or simply be very rough and * disconnect the battery *.

  While the Pro U300 is locked, I hear that HARD drive and fans are also swivel - as soon they were when entering standby or hibernation mode. Very ugly behavior - you can FRY your laptop with something like that. I thought that BIOS 3.70 was faulty but unfortunatelly version 3.90 also worthless.

  Furthermore, I can't yet understand why large (70% of the zip file) file of the package to upgrade the BIOS (3.70 and 3.90)... is the portable other flashers log file?

  Your ad, I understand that the screen does not wake up after its entry in the standby or hibernation mode.
  Am I wrong?

  I noticed that Toshiba has released a new version of the Intel graphics driver.
  At this time the update is 02/20/08 and the version is 6.14.10.4831.

  Maybe you should try to update the display driver too check to see if it would help to get rid of this annoying display problem

  I recommend to remove the old version of the graphics driver first, then install the new downloaded driver.

  Mate good luck

• Satellite Pro U300: No connection to the local network after updating BIOS 5.00 - WIN (Vista32)

  Hello!

  After the bios update newest to my Satellite Pro U300 (PSU31E) Lan Realtek adapter not working anymore. The map shows in Device Manager, but if I connect a cable, nothing happens (it says no cable connected).

  ipconfig-all says:

  Adapter Ethernet LAN connection:

  Medienstatus...: En medium (disconnected)
  Suffix-Verbindungsspezifisches DNS:
  Description...: Realtek RTL8101 Family PCI - E Fast Ethernet NIC (NDIS 6.0)
  Physical address: 00-1B-24-98-D7-AA
  DHCP aktiviert...: Ja
  Autokonfiguration aktiviert...: Ja

  Thanks for your advice!

  Hello

  In your case I would uninstall the Realtek LAN driver.
  Can I visit the Realtek and download and reinstall the latest LAN driver.

  In addition, in the DOS command window, you can try to run this command:
  * Ipconfig / renew *.

  PS: Try to also set the default BIOS too.

  Concerning

• Where can I find driver webcam XP for Satellite Pro U300

  where to find the driver for the webcam for U300 (os XP)

  The driver is located on the European driver Toshiba page:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Choose the Satellite Pro-> Satellite Pro U-> Satellite Pro U300-> XP-> Chicony Webcam driver

  and take advantage of ;)

• The maximum size of HARD drive the BIOS sees in Satellite Pro 4200 and 4300 series systems

  I want to switch the HARD disk in my Satellite Pro 4340. I know the 4200 and 4300 SP series can take at least a 20 GB HARD drive that I've already updated a SP4270 and SP4280 drives from 20GB already.

  I did a search on assignments earlier re. Satellite Pro 4200 and computers portable 4300 series as various other contributors of this forum had already asked this question. A respondent suggested that they had installed a 60 GB HARD disk without problem.

  Someone at - it else mounted a big HARD drive (or more even) in these notebooks series 4200 and 4300 and managed to do work OK and had the BIOS to recognize the total size of the HARD drive?

  What is the largest swap HDD that someone did with success on these machines of 4200/4300?

  Unfortunately, you will not be able to find accurate information about it. All you can find are reports from other users. I am really interested about other views.

  By the way: 60 GB HARD drive is not sufficient for you?

• Satellite Pro U300 - it just freezes and makes a noise

  Hello!

  I think I have a very similar problem!
  Since I bought my computer happens but not on startup. When I'm with her, she just freezes, makes a loud noise and I can't do anything to turn off, I need to use the same radical technique! Hold the reset button and sometimes I need to remove my battery.
  Now, it happens almost every day.

  I don't know how to run these disc harder than self-test or BIOS, try to find out what the problem with my computer. I have a Satellite Pro U300. Could someone help me?
  I hope that we will find what's wrong.
  Ah! Now I use windows 7 and Vista and the problem happens both...

  Thanks in advance,

  Fernanda

  Hi fefalm,

  If you have this problem, because you bought your computer, why you didn t contact a service provider authorized to solve the problem or ask a seller for a replacement one?
  If your laptop is still under warranty, contact the nearest authorized service provider!

  If that happens on different operating systems, it seems to be a malfunction of the equipment. Theoretically, it could be related to the HARD drive or another part

  The HARD disk, you can test with special diagnostics as Drive Fitness Test Tools. ask Google to find.

• Webcam on Satellite Pro U300 driver failure

  Hello

  I have a Satellite Pro U300 with windows XP pro.

  When I run my webcam, I get the message:

  "oben driver webcam fail, please restart camera or computer.

  On the homepage Toshiba that I can't find a driver for the webcam, what can I do?

  Thank you

  Very useful. Thank you very much!!!

  Good bye