Satellite Pro U300 BIOS update BACK

Similar Questions

• Satellite Pro U400 - BIOS update gone bad

  Hi all!

  I've updated the BIOS on my laptop and something was wrong, just not now a computer screen.

  I went to see the Web for Chris Bios recover.
  Have over 20 versions, but so far without success.

  My biggest problem is: I can't save on floppy disk 2 MB BIOS. All attempts to create a
  Flash or SD ended in failure.

  The laptop is: Satellite pro U400 PSU45E

  Please help me... the laptop reads the floppy in BIOS with little experience (the ones that come with Chris Bios 500Ko - 1000 KB) begins with a normal boot beep signals supposedly provided a definition blocks then baar times short beep and nothing to do...
  There must be something... BIOS BACK small size, emulator USB... BIOS to be torn down, so it is possible in charge from USB, SD...

  Every idea can be useful!

  Thank you very much

  Excuse my English

  f the subject isn't here, please redirect mderatora
  This is my 1 post here

  Hi mate

  Unfortunately if something was wrong during the update of the BIOS, then you won't be able to solve this problem without the help of a technician of the ASP

  I hope that the ROM BIOS module is not too bad
  In the worst case that the mobo is damage but maybe it s not damaged

  However. You must contact a local ASP and must ask for the manipulation of the Fryer!

  Good luck!

• Satellite Pro L40: Bios update not necessary - no settings for RAM in Bios 1.90

  Hi, I just bought a Satellite Pro L40 laptop and im trying to figure out why the bios has no parameter memory.
  If I look at the ram using a tool of information system (cpuz or aida320), it shows she doesn't move at the speed of 667 mhz but at 533 mhz.

  As you can see from this screenshot the memory runs at the real speed is less than the maximum that the sticks have a rated power.

  http://img135.imageshack.us/img135/4580/cpuz1pj5.jpg

  Its running at 266 mhz (533 mhz ddr) where it should be run at 333 mhz (667 mhz ddr).

  I also noticed that with this laptop fan never seems to come, is it possible to mount the fan?
  Whenever I have the laptop for more than 30 minutes, it becomes very hot.

  Hello

  > if I look at the ram using a tool of information system (cpuz or aida320) it shows that it does not run at the speed of 667 mhz but at 533 mhz.

  What is your FSB?
  If the laptop was equipped with memory PC2-5300 modules then they could run at 667 MHz, but only if the FSB would supports 667 MHz! I think is supported by the FSB of 533 Mhz.
  So I can't say it s nothing wrong!

  > I just bought a Satellite Pro L40 laptop and im trying to figure out why the bios has no parameter memory.
  Why do you think a BIOS update would turn the memory settings in the BIOS?
  Please don t mix of desktop computers laptops! Laptops cannot be overclocked.
  BIOS of laptop computers is not the same thing as a desktop PC BIOS!

  > I also noticed that with this computer laptop fan never seems to come, is there a way to turn the fan to the top? Whenever I have the laptop for more than 30 minutes, it becomes very hot.
  Have you noticed all automatically turn off downs or any other strange behaviors laptop as freezing OS for example?
  If it is then that the laptop runs correctly and doesn't overheat.
  Books to support thermal protection which would be closed the laptop automatically to avoid equipment damage

  Then lean back man and enjoy your nice toy ;)

  PS: you are fan of Carlos Santana? ;) I ask through your nickname ;)

• Satellite Pro M30 Bios Update

  Hello

  I have a satellite pro m30 and I would like to make a bios update. Utility hardware Toshiba says that my bios version is 1.4. The existing updates see 1.2, 1.6, but it says nothing about 1.4.

  Should I take 1.6?

  Any help?

  Thank you

  Hello

  It might be possible that the BIOS version 1.4 is the version of BIOS default manufacturer for this model.

  In my opinion you should take the 1.6 version because it is the most recent and it may be necessary!

  Here is the link: http://eu.computers.toshiba-europe.com
  go to Support & Download - Download BIOS - choose your M30 SP and click for the Description of BIOS for more information!

  Bye Bob

• Satellite Pro L300 BIOS update problem

  Hello

  I have a Satellite Pro L300 (PSLBHE).
  I downloaded the new bios and started the upgrade file. A window appears and shows the version of the old and new bios (v1.70-> v2.20). All in 1 min. my laptop computer screen turned black but the green light flashed HDD and does not what it is about 15 minutes. After that I pushed the power button and the judgment of the laptop. Now if I push the power button nothing happen just blank (black) screen and HARD drive flashing.
  What is the problem? What can I do? Please help me.

  Gjon

  It's the BIOS update is finished now. Of course, the BIOS update was interrupted and now of the BIOS chip is damaged.
  What can you do now?
  Unfortunately not much. What you need is a professional help, so I recommend you contact the closest service Toshiba and ask for help. I'm sorry.

• Satellite Pro P100: Bios Update went wrong - what to do?

  Hello
  I have a satellite pro p100 with win xp.
  I downloaded the bios-update victory.
  something is worng. the laptop was closed and when I try to start it,
  I blackscreen, do not see anything, windows does not start.
  nothing happens.

  Please help me, I write my degree and really need to resolve this problem quickly.
  thanx

  Hello

  so if your machine does not start then you need to send/bring your machine to the next partner service authorized in your country.

  Here´s a link to find one and I suggest you to contact one of them immediately because of your degree:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck
  Good bye

• Satellite PRO A300 BIOS update process: TEMPRO asks to update again

  Hi, I'm using Toshiba Satellite Pro A300 with Windows Vista Home Premium.
  Downloaded and run the BIOS update. The installer said that everything was OK with the BIOS flashing.
  But when the computer reboots, TEMPRO asking again the BIOS update.

  I don't know if the BIOS has been or has not been updated.
  How can I handle this:

  TKS

  Samuel a. Mello

  Hello!

  If you are running the Toshiba HWSetup you can see what version of BIOS you have.

  On the Toshiba site, you can check if you have the latest BIOS:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  On this page you can also find a new version TEMPRO.

  Good bye

• Satellite Pro C660 - BIOS update error

  Hello

  Try to update one of my employees with bios 1.50 laptops (C660) and it displays an error message displaying 3 possible causes. Power adapter not connected not (it's) battery is less than 10% (it is not) and the BIOS is updated to the version 1.50. When I tried the update the laptop was running 1.00. So I updated the bios to 1.30 with no problems, but when you try to update to 1.50 it still shows the error.

  Any ideas? You will need to get the bios installed as seems to solve problems hitting the phone suffers from.

  Thank you

  Hey Buddy,

  What operating system is currently installed?

  BIOS update it of necessary this value-added package is installed and you run the update as an administrator. Also, make sure that the battery is fully charged.

  What is the model number of the C660?

• Satellite Pro U400 BIOS update failed - what is the BIOS Boot-block access

  Hello

  My last update of the BIOS has failed and my laptop PSU45E PrU400 Satellite is now out of use.
  I want to use the recovery disk of crisis with a USB floppy drive, but I don't know the key combination to run the boot block.
  Is that someone can help me?

  Best regards

  Hello

  I was wondering what crisis recovery disk you have?  :|
  In my experience the special drive is required, which is available only for ASP technician
  That's why it of necessary to contact the ASP in your country to reflash BIOS.

  In my opinion you shouldn't t try recovery disks of the crisis who loves you in the net, it can drive to the mobo damage

• Satellite Pro U300 (PSU31E) standby & hibernation fails after updating BIOS

  Hello

  I wonder if it is common that after the upgrade of the Satellite Pro U300 (PSU31E) of the BIOS 2.50 at BIOS 3, 70 - Win or 3, 90 - Win, do sleep modes and Hibernate the * completely locked laptop computer? *

  After the upgrade, when I try to enter sleep or hibernation, the laptop turns off the LCD and gets locked so it isn't help to press and hold the power button, open/close the cover, press Fn - F3 or F4 - Fn, the only way is to disconnect the power supply and wait until the battery runs down, or simply be very rough and * disconnect the battery *.

  While the Pro U300 is locked, I hear that HARD drive and fans are also swivel - as soon they were when entering standby or hibernation mode. Very ugly behavior - you can FRY your laptop with something like that. I thought that BIOS 3.70 was faulty but unfortunatelly version 3.90 also worthless.

  Furthermore, I can't yet understand why large (70% of the zip file) file of the package to upgrade the BIOS (3.70 and 3.90)... is the portable other flashers log file?

  Your ad, I understand that the screen does not wake up after its entry in the standby or hibernation mode.
  Am I wrong?

  I noticed that Toshiba has released a new version of the Intel graphics driver.
  At this time the update is 02/20/08 and the version is 6.14.10.4831.

  Maybe you should try to update the display driver too check to see if it would help to get rid of this annoying display problem

  I recommend to remove the old version of the graphics driver first, then install the new downloaded driver.

  Mate good luck

• Satellite Pro U300: No connection to the local network after updating BIOS 5.00 - WIN (Vista32)

  Hello!

  After the bios update newest to my Satellite Pro U300 (PSU31E) Lan Realtek adapter not working anymore. The map shows in Device Manager, but if I connect a cable, nothing happens (it says no cable connected).

  ipconfig-all says:

  Adapter Ethernet LAN connection:

  Medienstatus...: En medium (disconnected)
  Suffix-Verbindungsspezifisches DNS:
  Description...: Realtek RTL8101 Family PCI - E Fast Ethernet NIC (NDIS 6.0)
  Physical address: 00-1B-24-98-D7-AA
  DHCP aktiviert...: Ja
  Autokonfiguration aktiviert...: Ja

  Thanks for your advice!

  Hello

  In your case I would uninstall the Realtek LAN driver.
  Can I visit the Realtek and download and reinstall the latest LAN driver.

  In addition, in the DOS command window, you can try to run this command:
  * Ipconfig / renew *.

  PS: Try to also set the default BIOS too.

  Concerning

• Satellite Pro U300-14R - no audio detected

  Hi all

  My Satellite Pro U300-14R detects no audio. I tried almost everything to solve this problem, including the update of the BIOS, driver sound driver chipset, etc.

  Still, there is no sound in my system. Not at all even when I load the sound system.

  I checked under sounds and Audio Devices Properties (Control Panel). Everything is disabled.

  Hope that someone would be able to help me.

  See you soon

  George

  Hey,.

  What operating system you have?

  You must install Service Pack 3 for Windows XP, because it contains important fixes for the sound card drivers.

• Satellite Pro U300 (PSU31E) - freezes on the Welcome screen

  Hi all

  I have a Toshiba Satellite Pro U300 model no notebook 01900REN PSU31E purchased as new and connected to Windows XP.

  It worked perfectly fine for about a year until very recently when it started freezing on blue welcome screen. I had to disconnect the battery because it has not proceeded past the blue welcome screen. I ran the antivirus avast but it nothing of the detected note. Now even when I disconnect and reconnect the battery the screen does not go beyond the Welcome screen blue even if the mouse is moved again, and occasionally the pointer arrow-pointer to sand-clock pointer initially and then rest as arrow-pointer changes. Pressing buttons, Ctrl + Alt + Delete, using the mouse or the battery are not any good.

  I backed up things but not until recently. Please help me, I'm an amateur like these sorts of things, I'm English teacher from teaching professional so I really need materials and capabilities of the laptop. What should I do, please help!

  Thanking you in advance,

  Hey the view,.

  Have you tried the same thing in safe mode? Go to the advanced boot menu by pressing F8, select Safe mode.
  Check it!

  It of really difficult to say why this is happening but if it doesn t work I think that it s time to reinstall Windows. So take the Toshiba Recovery disk and boot from it. If you follow the instructions on the screen you get factory in minutes! :)

• Can not install the latest driver from Intel on my Satellite Pro U300-10 display

  Hello

  Intel has recently, a new display driver, which I think is useful to me because it won't let me play games that require:
  Pixel Shader PS1.1
  Vertex Shader VS 1.0
  "Act of war" and others.

  The pilot is the revision of the pilot: 15.12.4.1666, March 5, 2009
  It is supossed to be the latest driver for the video card U300: MOBILE INTEL 965 Express chipset family.

  The problem is that when I try to install, I have an error that says: "not for this system, ask your provider manufacturer.

  How can I install or where I could find the solution?

  I have TOSHIBA Satellite Pro U300-10 with Windows Vista Business 32.
  MOBILE INTEL 965 Express chipset family
  MOBILE INTEL GMA X 3100

  Thank you much in advance.

  DCARL

  Drivers designed for laptops are changed and adapted to provide performance fairly, but not to force a graphics card to run on the limit. As you probably know there are big difference between office and mobile graphics cards.

  Desktop graphics cards have no limits with cooling and drivers can be updated very often. Design of portable computers is completely different and all hardware components are placed on the square. The common problem with laptops is to design the system of cooling, small but effective.
  Because of all these reasons, display drivers must be tested and adapted by the laptop manufacturers. The main point is to protect the material. The same situation is with other manufacturers of graphics card. They don't offer drivers for laptops.

  If your graphics card will blow that will be responsible for this Toshiba or Intel?

  By the way: Satellite Pro U300 is for me a laptop of small business and certainly not designed for games. Do you agree with me?

• Satellite Pro U300 shows "Unmountable_Boot_Volume" message

  I hope someone can help me...

  I have a Satellite Pro U300 and recently she comes with a stop with the message Unmountable_Boot_Volume error screen.

  Starting the machine, told me that windows did not start properly due to a problem of HW or SW. I gives me the options to start windows normally, go back to the last good configuration known or open in safe mode, however all these lead to the error message Unmountable_Boot_Volume.

  I am responsible to ensure that all new HW or SW is installed correctly and disable them if necessary. However, I have not installed anything recently and the computer was working fine.

  The error message appears for 4 seconds, and then the computer restarts and appears with the same startup message and continues in this circle reboot after each stop error message.

  I'm not a computer whizz as you probably can, but I would be very happy if someone knows what happened to my computer!

  Sometimes the file system can get damaged due to power outages or viruses or bad RAM.

  First of all, you should check the disk for bad sectors. Run the test Advanced in DFT (it is a bootable CD or a floppy disk):
  http://www.HitachiGST.com/HDD/support/download.htm#DFT

  Then, try to fix the file system by plugging the drive on another PC using a USB 2.5 "SATA HDD adapter. Run CHKDSK on the drive.

  If this does not work, you can try to repair Windows by going to the Recovery Options in the Windows Start Menu (press F8 before Windows starts).