Satellite Pro U300 - how to reinstall the system from original Vista operating?

Similar Questions

• Satellite Pro L40 - how to recover the system?

  Hello world

  My wife has a virus on his laptop computer. I think that it is the antivirus 2010. I can't access all the programs, and the recovery disk reads or that the virus has stopped working also the cd player. How can I re format the hard drive?

  Thanks in advance

  Rab

  Hi rab75,

  How have you used the Toshiba Recovery disk?
  I doubt that the virus has stopped working CD player. Maybe in Windows but if you use the Toshiba Recovery disk you will need to boot from the disc.

  So I put the disk in the CD/DVD drive and boot from this drive. Some files are loaded and you get the recovery disk screen where you can start this procedure. You must follow the instructions on the screen and a few clicks are needed to complete the installation of recovery. :)

  Check it!

• Satellite Pro U400 - how to upgrade the BIOS from 17/07/08

  I downloaded the update to the bios - the following file: bios - 20080717104036.zip
  I unzipped. But the way I did it twice and then I can not find the file to install this update.

  The first file of the sip consists of another zip file and in the second, there are 3 foulders: BOOT, EFI and SOURCES and 1 file BOOTMGR that is not a program.

  Can someone tell me what should I do with this update in order to install?

  Hello, Olga

  Updated the BIOS, you can use 3, 00 - WIN version. Extract all the files listed on the desktop, run WinPhlash.exe. Update BIOS version WIN can be done under operating system running.

• Satellite Pro 4200 how to avoid the mistakes of the ACPI

  Satellite Pro 4200 how to avoid the ACPI errors after installing SP2 for windows XP Prof
  The problem is that my computer after installation service Pack 2 need about 15 minutes from time of shoutdown - what should I do to avoid this problem.
  Piotr Plecke

  Hello
  in this case it would be interesting what Type of laptop it is exactly.

  You will find this model on the bottom of your laptop. There is a review of it.

  Some models have a Bios update available, others not, for example.

  Please send additional information!

  Good bye

• Satellite Pro U300 (PSU31E) - freezes on the Welcome screen

  Hi all

  I have a Toshiba Satellite Pro U300 model no notebook 01900REN PSU31E purchased as new and connected to Windows XP.

  It worked perfectly fine for about a year until very recently when it started freezing on blue welcome screen. I had to disconnect the battery because it has not proceeded past the blue welcome screen. I ran the antivirus avast but it nothing of the detected note. Now even when I disconnect and reconnect the battery the screen does not go beyond the Welcome screen blue even if the mouse is moved again, and occasionally the pointer arrow-pointer to sand-clock pointer initially and then rest as arrow-pointer changes. Pressing buttons, Ctrl + Alt + Delete, using the mouse or the battery are not any good.

  I backed up things but not until recently. Please help me, I'm an amateur like these sorts of things, I'm English teacher from teaching professional so I really need materials and capabilities of the laptop. What should I do, please help!

  Thanking you in advance,

  Hey the view,.

  Have you tried the same thing in safe mode? Go to the advanced boot menu by pressing F8, select Safe mode.
  Check it!

  It of really difficult to say why this is happening but if it doesn t work I think that it s time to reinstall Windows. So take the Toshiba Recovery disk and boot from it. If you follow the instructions on the screen you get factory in minutes! :)

• Satellite Pro L10 will not start the system

  Hello!

  I have a Toshiba Satellite Pro L10, which won't work for some reason any.

  The last time that I used it, it worked perfectly fine, but now all I get is a black filtered message on "windows starts do not successfully»

  It indicates that the computer is not responding and asked me to choose one of the five options - safe mode, safe mode with network, security mode command, last known configuration, prompt or start windows normally.

  There is also a 30 second countdown if I do nothing the portable samekh automatically.
  It is, none of these things work.

  Everything that happens with any option is to a thought very much time on things, then it goes to a black screen with a time/processing bar downstairs, then when that ends it turns itself off, samekh, mw windows page shows (with f2 and f4/f10? options) and the process is repeated.

  He did about 50 times now and still nothing.
  I tried the command ctrl/alt/del, I tried to turn if off and try again, I even opened the f options but I don't know enough about computers to do more.

  Help, please!

  If possible I would like to get the computer on long enough to verify what documents I have on this subject before I can back up (if necessary) and restore it to the factory settings (as I predicted), or if this is not possible, I do not think that there is a lot to lose in this respect in any case, am prepared to take it all back to factory if necessary. I have all necessary installation CD and manuals to go with.

  hope this makes sense and I gave you all you need to know.

  Thanks, B

  It seems that the laptop is not able to boot the system, but I m not quite sure if it s because of the defective system or HARD drive corruption.
  If it s just a system problem, the installation of the new Windows operating system should help you to get it resolved.

  In case the HARD disk is defective, you need to replace the HARD drive and reinstall the system.

• Satellite Pro U300: No connection to the local network after updating BIOS 5.00 - WIN (Vista32)

  Hello!

  After the bios update newest to my Satellite Pro U300 (PSU31E) Lan Realtek adapter not working anymore. The map shows in Device Manager, but if I connect a cable, nothing happens (it says no cable connected).

  ipconfig-all says:

  Adapter Ethernet LAN connection:

  Medienstatus...: En medium (disconnected)
  Suffix-Verbindungsspezifisches DNS:
  Description...: Realtek RTL8101 Family PCI - E Fast Ethernet NIC (NDIS 6.0)
  Physical address: 00-1B-24-98-D7-AA
  DHCP aktiviert...: Ja
  Autokonfiguration aktiviert...: Ja

  Thanks for your advice!

  Hello

  In your case I would uninstall the Realtek LAN driver.
  Can I visit the Realtek and download and reinstall the latest LAN driver.

  In addition, in the DOS command window, you can try to run this command:
  * Ipconfig / renew *.

  PS: Try to also set the default BIOS too.

  Concerning

• Satellite Pro U300 - Notification callback on the registration Web page

  Hello

  I just bought a Satellite Pro U300, but after the finalization of the recording of the laptop, I always get the icon in the tray - toshiba notification - sign up for my laptop.

  When I accept, I have already all the information for my registration added with the exception of the date of purchase.
  I have complete and click Next. I get a message that my phone has already been registered, but the bar remains.

  I can't disable the: turn off other reminders or

  Thank you

  Hello

  you say it s always in the taskbar? Check the autostart folder? Another way may be to use the microsoft sysinternal tools to remove this reminder from startup list. You can also use msconfig, but I guess you have Vista, so it would be better to use sysint...

  Visit this link and download the tool to change your startup list:

  http://www.Microsoft.com/technet/sysinternals/SystemInformation/Autoruns.mspx

  I mean, Windows isn't reliable at all, but some of the guys microsoft program REAL good things and I appreciate it. : D

  Welcome them

• Satellite Pro L300: How to get the sleep settings

  Before you have to play with the Satellite Pro L300 laptop recently (on the instructions of the Tech) when I close the lid of the laptop that he went to sleep BUT when I opened the lid eventually, I had to press the power button to restart the laptop.

  But now, he's just on stand by.
  How can I get this back to how it was (having to press the button to exit stnd - in)-help!

  I tried to turn off Toshiba power saver and using the windows settings but nothing
  I have treid working :(

  Can anyone help?

  I get at the end of my home with this computer laptop blinkin :(

• Satellite Pro L40 - how to enable the WLan using ConfigFree

  Can you help me?

  My English is bad I do not end.

  The question is:
  My computer is a Toshiba Satellite Pro L40 and I use the ConfigFree for the wireless, but it seems that the WiFi network is disabled.

  Help please!
  I want to know what's wrong

  Thank you!!

  Hello!

  Your wireless network card is recognized correctly in the Device Manager, or you may notice a yellow exclamation?
  Her check first because otherwise, you can get the WLAN to work.

  In addition, you can activate WLAN with the material on the laptop switch which must be set on and the FN + F8 key combination.
  Check it!

  After this Free Config should find your WLAN router if you are in the range of that.

  Good bye

• Satellite Pro U400: How to configure the VLAN for the Marvell Yukon LAN control.

  Hi all
  I need to access the 2 VLANS with the controller LAN Marvell Yukon 88E8072 for my Satellite Pro U400. I installed the necessary Configuration utility network Marvell tell me after installation, VIRTUAL local network settings must be mounted in the Device Manager (Windows 7, right click on computer, properties, click device/network management adapters/double on Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller), I can't find a thing to configure here but wake-on-LAN.

  Any suggestion? Thank you!

  Michael

  Hello

  I think that in this case, you can use a network switch.

• Satellite Pro A200 - how to activate the new device LAN card?

  Hello.

  I have a Satellite Pro A200 and I replaced the card with an Intel 5100 (512AN_MMW) wireless and it detects OK and installs the drivers etc, but it does not work because he says that the switch is turned off on the front of the laptop. The switch is on I also tried pressing fn + f8, but it still does not work.

  The laptop is running Windows 7 64 bit

  Kind regards.

  Hi evo8.

  What card WLAN have you had before and do the work of a former?
  I think that it of difficult to say why it doesn t work but maybe this card is not compatible.

  By the way: do other FN keys FN + F8 work or simply not?

• How to remove the watermark from desktop vista boot

  How to remove the watermark of ' Wndows Vista Starter from the desktop? I changed the same wallpaper theme and also reviewed the "Bcdedit" cmd.exe... "but in vain.

  Unfortunately it is one of the many limitations of vista boot,

• Satellite Pro S500-10F - cannot reinstall the operating system

  Hello

  I have a Satellite Pro S500-10F provided with Windows 7 Professional with downgrade rights (and DVD) to XP Pro. I downgraded to XP Pro and everything worked fine (I did it on a number of similar machines).

  Then Windows started to have problems and crashing with BSOD. I decided to rebuild the machine to reinstall Windows XP Pro from DVD supplied with the machine. The thing is it gets 2% and then gives the BSOD.

  I thought it was the hard drive because there was some disk errors when it removed and put it outside of another machine, so replaced. Still the same problem. I tried to connect external USB DVD drive and boot from that. He did indeed start the external drive but then for some reason, try to copy the files of its own DVD player. I tried to reinstall Windows 7 Pro of the DVD to the top together, I created, this failed. I tried to install Windows XP Pro since version box and have failed.

  At this stage do not know if DVD player or what. He tried to build start player flash, but even if the system seen as boot option, then tried to boot from the network?

  Any help much appreciated.
  Thank you
  J

  Hey Buddy,

  To be honest I put t think that it is what you can do. You have tested the recovery disk and a new HARD drive, but the same happens. So that would mean it's hardware related problem.

  TOSHIBA recovery disk contains an image pre-tested all drivers and tools. This means that you can still install Windows recovery disc and it will work. If it's not (like in your case) it something wrong with the hardware.

  If your laptop is still under warranty valid, you can bring it to a service provider allowed in your country and guys can fix this for free because of the guarantee. Get in touch with technicians and explain your problem, they will sort it out for you. ;)

• Satellite Pro A300: How to recover the Vista operating system

  My friend has a Toshiba Satellite Pro A300 it has a 4 GB of ram, but on Windows Xp shows only 3 GB
  I also want to put in place the back of the Vista, but I can't not insatall any operating system (only the Toshiba Xp dvd)
  (there is a HDD recovery folder on the C drive, I think it is the Vista that he owned before but a don't know how to install it)

  Ok. If the folder in HARD drive recovery then it should be possible to carry out a procedure for HARD drive recovery, remain on the second partition.

  First of all, start Notepad and press F8 immediately after that the laptop has been powered. Then choose the first option called fix my computer.
  A new window should open, and you should choose the last option called Toshiba HDD Recovery.
  Then follow the instructions on the screen.

  This should usually works if the folder of HARD disk recovery and partition has not changed or deleted.

  Check it out if it does not, you will need to order a Vista of Toshiba Recovery DVD:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye