Satellite Pro U400 - 12 p: Vista 64 bit audio driver has no - no microphone

I have the Satellite Pro U400 - 12 p.
I installed the Vista 64 bit, because I upgraded the ram to 4 GB.
Now, Conexant driver does not work.
Just as it should, even tried downloaded the 32-bit Version.
None.

It shows that it can be upgraded, then 'install' file, and at the end, it shows "Failure."
The cause of it, it shows that I have no audio output installed. = speakrs do not work and the MIC of course.

Only when I remove the driver in Device Manager and restart the machine, it becomes thin.

So, what's the problem?
* The problem is the Microphone does not work! How can I make it work? *

Please, help me, I am a student, and it takes a lot for studies.

Thank you much for the help.
NIR.
.

Hello

It is not easy to say why this is happening.

Maybe the facilities is order wrong. I send you the facilities for U400 command.
Try please install all the drivers, tools and utilities following this order of installations.

Windows Vista SP1
KB941833
KB941833
Module of Chipset Intel (r)
Intel (r), Robson (iMSM Driver of Intel)
Intel Crestline-GM / UMA Drive
or
AMD M82XT /M86 driver
Audio driver Conexant CX20561
Driver LAN Marvell 8040/8055
Synaptics Touch Pad Driver
Alps Touch Pad Driver
Conexant Modem driver
Modem region Select utility
Driver Intel LAN wireless Golan/Kedron
Intel Proset utility
Atheros Wireless LAN driver
Realtek RTL8187B Wireless LAN Driver
Chicony camera software
Bluetooth Stack for Windows by Toshiba
CIR Port driver
TOSHIBA Value Added Package
TOSHIBA hardware configuration utility
TOSHIBA supervisor password
TOSHIBA SD Memory utilities
AuthenTec AES1610 fingerprint utility
TOSHIBA ConfigFree
TOSHIBA WPS library
TOSHIBA Assist
TOSHIBA Speech System
TOSHIBA Extended Tiles for Windows Mobility Center
TOSHIBA Remote Control Manager
CD/DVD Drive Acoustic Silencer
Toshiba HDD Protection
TOSHIBA face recognition
TOSHIBA TRS driver
HDMI Control Manager

Please post the result.

Tags: Toshiba

Similar Questions

  • Satellite L300 - 1F5 PSLBGE Windows Vista 64-bit display driver

    Hello

    I bought the Satellite L300 PSLBGE two weeks; as you know, the operating system is not included.
    I installed Windows Vista 64, and since then I struggled to find the drivers.

    After weeks of struggle, I managed to get all the necessary drivers, except the "Display Driver"

    On the site of Toshiba, this driver is none that does not exist. There is a display driver for the same model but for Vista 32, I downloaded it but it is impossible to install (indicating that I have not the minimum standards to install this driver).

    Help, please! I need this driver for Vista 64. It is urgent...

    Thanking you in advance,

    > I installed Windows Vista 64, and since then I struggled to find the drivers.
    Usually, you must check if the laptop is supported for some OS at first and then install the operating system.

    In any case, according to the specifications of the laptop, your laptop must have the Intel GL40 graphics card. The same Satellite Pro U400 PSU45E and it is Vista 64 bit supported.
    HEREis the link to the driver.

    Check it out!

  • Vista 32 - bit Audio Driver 'explorer.exe' gel

    I currently have Windows Vista 32 - bit OS on a Toshiba Satellite L305-S5875
    I made sure the Realtek High Definition Audio Driver is updated. and all windows updates are up to date (including the optional updates)

    Problem: When you run Youtube.com on Mozilla Firefox 10.0, I try to change the volume using the knob or press mute. "explorer.exe" and then freezes and a prompt
    Windows Explorer not responding
    A solution can control Windows online. If you restart or close the program, you can lose information
    [Clickable option] Search for a solution, then restart the program
    [Clickable option] Close the program
    [Clickable option] Wait for the program to respond

    Details of the problem:
    Description:
    A problem caused this program blocking interact with Windows.

    Signature of the problem:
    Problem event name: AppHangXProcB1
    Application name: Explorer.EXE
    Application version: 6.0.6002.18005
    Application timestamp: 49e01da5
    Hang Signature: 7ce1
    Hang Type: 128
    Waiting on the name of the Application: svchost.exe:AudioClientRpc
    Pending on the Application Version: 0.0.0.0
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033
    Signing of additional blocking 1: 9224369711237709974176f646a5196a
    Signature of blocking additional 2:3607
    Signing of additional blocking 3: 76bb4323b453f4f8bf75599c6d50c88d
    Signing of additional blocking 4: 7ce1
    Signing of additional blocking 5: 9224369711237709974176f646a5196a
    Signature of blocking additional 6:3607
    Signing of additional blocking 7: 76bb4323b453f4f8bf75599c6d50c88d

    Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409
     
    Solutions anyone?

    Hello

    Method 1:

    Step 1:

    I suggest you check in safe mode.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Step 2:

    I also suggest you perform the clean boot and check.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Method 2:

    I also suggest you to see link and check.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    See also:

    How to troubleshoot performance issues in Windows Vista

    http://support.Microsoft.com/kb/950685

    I suggest update you also the Audio drivers and check.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  • Re: Satellite Pro U400-160 - freezes when copying larger files or videos

    Hello:

    I have a Satellite Pro U400-160 and a VERBATIM external hard drive USB eSATA combo.

    If I turn on AHCI mode recognizes the drive, but when copying the video files or large file size, the system is frozen. However if I remove the mode AHCI works correctly. I have the version 9.8.9.1023 Intel (r) Matrix Storage Manager and my laptop BIOS v4.0 and Windows Vista Business.

    Thanks in advance.

    Hello

    Normally the AHCI mode has nothing to do with an external HARD drive. It is only important for the internal HARD disk if you install Windows.

    Anyway, you have installed all the updates of Windows for Vista?
    In addition, you should test another external HARD disk or with another cable.

    Welcome them

  • New Satellite Pro U400-12y is very slow

    Just bought Satellite Pro U400-12y with Vista Business pre-installed (1 GB preinstalled memory).
    However, the startup is very slow and actually the computer seems to work in a time warp.

    Any ideas? Is there a fundamental problem?

    Yes, I have an idea.

    I think that the high amount of background processes affect the performance of laptops.
    He should know that the U400 supports many different features and these features are controlled by different applications.

    If you want you can start the msconfig and disable some unnecessary and unimportant process. Take a look in the Startup tab.

    In addition, I recommend to disable and remove the preinstalled software called Tempro.

    I did it on my system, and now it runs much faster

  • Satellite Pro U400 - cannot install VAP on Vista 64-bit

    Hello
    Since I bought 4GB of RAM for my Satellite Pro U400 PSU45E, I installed vista Business 64-bit, with all drivers and bios 64 bit found on the toshiba site.
    easy, with the exception of the "value added package 1.1.19", whenever I try to install I get: error "failure of GetProfString."

    I installed every driver and utility for 64-bit, but still the same...
    Everyone has experienced with this?

    Without VAP, I can't use the Toshiba power saver, worst profiles I can't go back because I did a new install and deleted the recovery partition!
    Please, someone help!

    Hello

    VAP contains all the modules necessary and you n t need to install other tools in order to install VAP
    I think that it s a Vista may issue you should do a clean install, then you must update the Vista for the last State.
    After have installed all the patches Vista, try to install VAP and other tools.

    Good bye

  • Are 64-bit OS drivers available for Satellite Pro U400 PSU45E

    I am looking for a Pro U400 PSU45E-00D005EN, which comes with 3 GB of RAM.
    The specs say it can take up to 8 GB, which is something that I would like to upgrade to.

    I run a large number of virtual machines on my machine for purposes of development and support.

    Anyone know if Toshiba allow 64-bit drivers the U400 that I need a 64-bit to support all Windows operating system that is more than 3.2 Gb of RAM.
    If not, is there a repository that anyone uses?

    Thanks in advance!

    Hello

    I think the Vista 64 bit drivers will be available by the Satellite Pro U400.
    Vista OS 64-bit drivers are available for another series of Toshiba and I don t see why the pilots shouldn't t be available satellite Pro U400 too many serious reasons.

    But the satellite Pro U400 seems to be very new series and I think it will take some time until that pilots will be released.

    Welcome them

  • Satellite Pro U400: How to remove folder HDD Recovery Vista running Win 8

    Hello!

    I have updated my Windows Vista to Windows 8 via the Microsoft upgrade offer. Toshiba does not support the upgrade of the Satellite PRO U400 of Win8, but it works so far, only a few features are missing...

    In this HARD drive recovery process, Vista folder remained on my partition E: (containing about 5 GB of files dated 2008...).

    I HAVE (even 2 sets of) recovery DVD for Vista.
    The infrastructure of original HDDRecory for Vista on the laptop ran defective, already long ago for some reason any.

    There is therefore no reason to keep the old HDD Recory on E: folder.
    It is completely unnecessary and I would like to remove this folder without formatting E:.
    However, although I work with admin rights, this is strictly rejected by the system of Windows 8.

    Is there any idea how to get the access rights to delete the HDDRecory folder?

    Best regards and thanks for the help!
    Gernot

    So far I didn't test these actions, but if you have administrative rights, maybe it's possible to delete certain partition and without changing the ability to create a new.
    Try to do this, use the option of disk management in computer management.

    Of course before trying to do this backup all other important data stored on that partition.

    Please let me know if it will work.

  • Satellite Pro U400 - 13 k - can not connect on Vista - SOLUTION

    Setting of the Romanian regional components at installation time makes you unable to log into vista: Runtime LogonUI.exe error

    Model: Satellite Pro u400 - 13 k.

    No problem:

    Installation of vista start preinstalled, idir a u400 - 13 k,.
    When prompt change to Romanian locale

    Result: after completing the installation of vista program, LogonUI.exe crashes with Microsoft C++ Runtime exception dialog box.

    _Solution: _

    * Restart in mode safe then burn collection amovible.*
    * Restrat configuration then do not change the regional settings *.

    Hope this helps other customers until it is resolved.

    * For Toshiba QA Team *: I spent almost 4 hours to work around your untested product. Please at least fix this bug for other clients, as the time is important to everyone. I guess this can be linked to the logon request is not properly located or crush fingerprints.

    Kind regards.
    sandi_ro.

    US Forum: http://laptopforums.toshiba.com/tshb/board/message?board.id=brd_SatPro&message.id=180

    Hi Sandi

    Thanks for this solution.
    This could be useful for all users who are looking for such a solution here in the forum.

    Greetings

  • Satellite Pro U400 VISTA disk management has 6 primary partitions

    Hi all!

    I have a strange effect on my Toshiba laptop Satellite Pro U400 (but it seems not to be specific to this one that I saw the same symptoms elsewhere, at the same time):

    I had the laptop with a 320 GB drive with recovery-(invisible / "Configuration EISA", 1,46 Go) system (C:, ~ 150 GB) and data (E:, ~ 150 GB) volumes. It's the usual structure of Toshiba,

    pre-installed OS was Vista professional.

    As I plan to install Linux in addition, I have done as a result of preparations:

    Recovery disc Vista created 1.).
    2.) C: shrunk to ~ 100 GB using Vista disk management tool.
    3.) E: shrunk to Go ~ 98 using Vista disk management tool.
    It is suggested that 4.) E: directly behind C: using Parted Magic CD.

    Finally I got a 97 GB of free space at the end of the disc, and everything worked well away. Creating an additional on the free area, Vista disk management, resulted in an extended partition created by Vista. This extended partition contained the extra volume as well as the free space remaining behind.

    To prepare for installing Linux, I've finally created three logical Volumes inside the extended partition with Vista disk management tool.
    After that, I had the following structure of the partition on the disk (indicated by the Vista Disk Manager):

    invisible 1.46 GB, primary
    C:, ~ 100 GB NTFS, primary, active, System
    E:, ~ 98 GB NTFS, primary, data

    ~ 97 GB extended partition, containing:
    2 GB unformatted (planned for Linux swap)
    20 GB unformatted (planned for Linux root "/")
    21 GB unformatted (planned for Linux "/ home")
    Empty remaining 54 GB space

    More on Vista worked properly!

    Recently, I installed OpenSuse 11.1 using the volumes placed within extended partitions (user-specific configuration). The Installation worked correctly. Logical volumes have been formatted to

    2 GB of swap (swap Linux, / dev/sda5)
    20 GB ext3 (Linux root ' / ' on/dev/sda6)
    21 GB unformatted (Linux "/ home" on/dev/sda6)

    during the installation of Linux. Linux and Vista up and running with their scores. If I look at the hard drive with Linux' partitioning tool, I see three main partitions + range, as expected. The scope contains the Linux partitions + empty disk space.

    HOWEVER:
    ========

    If I look at the hard drive with the Vista disk management tool now, I get the following image:

    invisible 1.46 GB, primary
    C:, ~ 100 GB NTFS, primary, active, System
    E:, ~ 98 GB NTFS, primary, data
    2 GB PRIMARY, no format info displayed
    20 GB PRIMARY, no format info displayed
    21 GB PRIMARY, no format info displayed
    Empty remaining 54 GB space

    This means:
    VISTA DISK MANAGMENT ME PRESENT 6 PRIMARY PARTITIONS WITHOUT ANY COMPLAIN
    Although a hard drive on the PC architecture usually only supports maximum 4 primary partitions.

    Issues related to the:

    Have you ever seen a similar behavior?

    Is this a bug of presentation in the Vista disk management tool?

    Or is it a bug in formatting under Linux?

    Is there a solution for this problem?

    At present, the two BONES work very well. However, the disk will be get permanently damaged as soon as I try to create more partitions in the empty space left?

    Sincere greetings and thanks for your comments.

    Girard

    > Have you ever see similar behavior?
    NO.

    > Is this a bug of presentation in the Vista disk management tool?
    I doubt that it is a bug, I think you forgot something.

    As far as I know you can create 4 partitions on the HARD drive and this is the reason why you have the ability to create an extended partition.
    An extended partition can be divided into several logical drives.

    That is why it s wise to create a primary partition for Windows OS for example and an extended partition, which can decompose the in logical drives (partitions) different.

    However, I put t see a problem if everything works properly

    Welcome them

  • Audio driver does not work on Satellite U400-112 with Vista 64-bit Buss

    Hello

    I installed Win Vista Buss. 64-bit on my Toshiba Satellite U400-112 but the original driver for the Toshiba site does not work properly, honestly does not at all. The only driver that works is a winner. Vista driver but when I plugged in her headphones just got pregnant shape, but there is no sound in headphones.

    Can someone help me, please?

    Hello!

    I have a Satellite U400 with Windows Vista 64 bit also, and I used the driver on the Toshiba site (Conexant 4.36.7.0).
    It works without problems, I can hear sounds with the speakers and headphones.

    Maybe you have an old BIOS. After the installation of Windows Vista, I made an update of the BIOS so try that too.
    The BIOS you can find also on the Toshiba site.

    Good bye

  • Satellite Pro U400 - Vista boot failure

    My 2nd nine Satellite Pro U400 (first a HARD drive failed after 1 week!) now does not start on Vista.
    Works very well for 4 weeks with upgrade original Vist Basic to Ultimate and Office 2007.

    Today on the switch on the Toshiba bar logo (with go to Setup etc.) started then replaced by Microsoft 'bar', then replaced by the arrow of the Mouse/touchpad.
    Mobile arrow on the screen of the mouse, but then nothing else, boots.

    Tried all modes of security and same problem.

    Ideas to please or do I have a 2nd 'lemon '!

    Hmm. I don't know if this problem could be related to upgrading from Vista Basic to ultimate, but nothing is impossible m.

    I think the HARD drive is not the problem as you can still start the OS startup.
    OK, the OS crashes, but if the HARD drive would be dysfunctional, then you should be able to see the 'bar' of Microsoft.

    So for me, it looks like something wrong with the operating system and therefore the use of the recovery CD would be desirable.

    Using the recovery CD would format the HARD drive, but unfortunately I really t see any other possibilities for the laptop running again.

    Good luck

  • Satellite Pro U400 - 23 M - a good buy?

    I think of buying a Satellite Pro U400 - 23M. I currently have [Satellite P100-208 | http://uk.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UK&DISC_MODEL=0 & ACTION = PRINT_WITH_BACK & com decided .do w .broadvision = Yes & PRODUCT_ID = 122152] and I'm tired of the hazzle to carry a portable 17 "inches autour, it is also quite noisy.

    I just wanted to get a feedback from you guys about the U400 - 23M series. Here are the specs:

    • Intel Core 2 Duo T5870 2.0 GHz, 2 MB
    • 13.3 "TruBrite® WXGA 1280 x 800
    • 4 GB DDR2 800 MHz - max 8GB
    • 160 GB SATA 5400 RPM / min. S.M.A.R.T.
    • 8 x DVD ±RW burner double layer
    • Intel Graphics Media Accelerator 4500MHD
    • 24-bit stereo high-definition
    • 10/100 ethernet adapter and modem 56 k
    • Wireless 54Mbps 802. 11a / g
    • Battery Li - ion, battery life up to 3 hours (Mobile Mark 2007)
    • 3 x USB2, FireWire, eSATA, Bluetooth
    • Integrated 1.3 megapixel webcam
    • 5 in 1 card reader
    • Audio input and microphone
    • Operating system: Windows Vista Business (standard) with the option of Windows XP Professional
    • Only weighs 2.0 kg (about 4 pounds)
    • 2 years warranty in the world

    I have a few questions for you guys who own a laptop U400.

    Is - this treatment of 64-bit support? I don't know if the Vista operating system that is delivered is 32-bit or 64-bit.
    Run quietly and cool when they surf the web, type in Word and under the easy workload like that? It gets very loud and hot runs more demanding programs such as Photoshop CS3?
    I know that this video card is not ment for gaming, but manipulates her older games like Call of Duty 4?

    Do you recommend this laptop? I tried searching the Internet for customers, but I couldn't find the model U400 - 23M. What are the advantages and disadvantages on this laptop?

    Hi mate

    I n t have the Satellite Pro U400 - 23M, but I m an owner of the Satellite U400-10N.
    I use it in my office all I love this little baby.

    You should know that the U400 has 13.3 display and it of smaller than the P100.
    So you will definitely notice a difference.

    One of my friends said that 13.3 would be too low for him, but for me it s best. I can take everywhere and sometimes I m work while traveling around the world

    So I m very satisfied.

    I ve installed Win XP on this U400 and it s functions perfectly!
    But you can install Vista 64 bit too. The Satellite Pro U400 - 23M uses the Intel Core 2 Duo CPU T5870, that supports 64-bit

    But note; the U400 is not really a cellphone game hardcore.
    My U400 supports an Intel graphics chip and usually I only use it for office, graphic design (web) applications and web browsing.

  • Satellite Pro U400 - 14 c - what are the specs?

    Hiya,

    Can someone tell me if Toshiba never worn on a Satellite Pro U400 - 14 c, and if yes, what are the specs? I just saw one sold on Ebay and can't find any info about it anywhere...

    Thank you very much...

    Hello

    I searched a bit on the Internet with Google and I founded a few details on the Satellite Pro U400 - 14B:

    Intel Core 2 Duo T5750 processor
    Intel GM965 chipset
    3 GB DDR2 (667 MHz) RAM
    13.3 ° WIDE XGA display
    HARD DRIVE 250 GB
    DVD-SUPER MULTI (+ R DL)
    32-bit Vista Home Premium preinstalled

    I hope that this information is a little more useful for you and I m sure that Toshiba has released this laptop because otherwise you wouldn t find some details on the internet about it.

    Good bye

  • External monitor flickers always on Satellite Pro U400 - 13G

    Hello

    I have a Satellite Pro U400 - 13G that connects external monitors with VGA port.

    I am running Vista Ultimate 64-bit with the latest graphics drivers from intel, I also tried the drivers from the Toshiba download site.

    Anyway... I tried 3 different external screens to connect a LG with resolution 1280 x 1024, an acer projector with resolution 1024 x 768 and a Samsung SyncMaster 226BW running 1680 x 1050.

    All these monitors simply sparkles... a higher resolution = more flicker. It seems to be worse with gray background.

    I tried the system Windows 7 RC1, same problem.

    When I unplug my diet, Twinkle seems to be... a little reduced, there is still a lot of flicker.

    Someone knows how to fix this?

    Hello

    I think she might be grounded question in this case it is recommended to use a power adapter 2 cords.

    I also found this thread on U400:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=150470

    The user uses the cable HDMI to DVI and the external image is even more clear that the laptop LCD

Maybe you are looking for