Satellite Pro U400-13O: can not enter TrueSuite without the fingerprint

Similar Questions

• Satellite Pro A100: Why can not connect Internet with the net card

  I can't connet Internet whith this net card, but I always connect it with a wireless network card

  Hello

  I put t know why you can not connect to the internet, but we need to study a little.
  Have you checked if the network card has been properly installed? The network adapter appears in Device Manager correctly?

  What do you use to connect to the internet; Modem or router WLAN?
  Have you checked the TCP/IP protocol if the IP address setting has been configured to automatically get?

  Check if there is an active firewall

  As you can see, there are a lot of restrictions and everything must be checked!

• Micro have a lot of noise on Satellite Pro U400-13O

  Hi there and Happy New 2009

  Toshiba Satellite Pro U400-13O, I bought a week ago and found out that the built-in microphone have a lot of noise when I talk via Skype for example.

  I tried changing the driver, but the problem still exists.

  What should do S? Any suggestions?

  Thanks in advance for your support

  CIKI

  BTW: I am running Vista

  Hello!

  In your case, I would check the settings in the control-online sounds and audio devices Panel
  Perhaps there is a misconfiguration or other.

  Good bye

• Satellite C660 - 2-3: can not enter the BIOS

  Hello

  I activated the quick start function that ignores the Logos and boots only from the HARD drive, but now I need to install a 32-bit Windows for the school, but I can not enter or reset the Bios.

  I tried every combination of buttons, I can think.
  Is there a way to delete this feature again without disassembling?
  Existing windows are not the original, so no toshiba software is installed.

  Thanks for help.

  Hello

  Have you tried pressing the F2 key while turning on the laptop?
  Press F2 repeatedly in line if this will not help press first "INS" and then F2 to enter the BIOS

  Good luck

• Re: Satellite Pro U400 - Windows could not start, how to recover?

  I hope this is the right forum to display this property (if not, please let me know where I should post this) and nude w / a beginner like me. Any help or direction will be appreciated.

  I have a Toshiba Satellite Pro U400-160 is more than a year. I have not used a lot lately, because I usually use my netbook computer for day to day stuff, but the Toshiba contains some files I want to see lost. That's the message that came when I turned on my laptop for the last time:

  "Unable to start Windows. A recent hardware or software change might be the cause.
  To solve the problem:
  1. Insert your Windows installation disc and restart the computer.
  2. choose your language settings, and then click Next.
  3. click on "repair your computer".

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance

  File: \Boot\BCD
  Status: 0xc000000f
  Info: An error occurred trying to read the boot configuration data. "

  Usually, I store all my software as a whole but I recently changed from home and for the life of me, I can't find the Toshiba recovery system disk. Even if I did, however, which would mean losing all files on my computer?
  My question is, is there a way to fix this without losing all data? Should I first try to save the data somehow and then solve the problem? And finally, how to solve this problem with/without the recovery CD?

  Thanks in advance. Any help will be MUCH appreciated.
  PS. This look is like a virus? What is a windows update that has corrupted some files?

  Hi monstarika,

  You can access the Windows Advanced Boot menu and boot into safe mode?
  If so try also to start the recovery of HARD drive if you choose fix my computer. If the operating system preinstalled by Toshiba is still installed, you can use this feature.

  If this work of t doesn't and you don t have the recovery disc, you can order directly in an enw one of Toshiba. That s no problem because you can order it online here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Satellite Pro U400 - BT does not work after installing Win 7

  Hello.

  I have a problem with my bluetooth device. I have Toshiba Satellite Pro U400.
  My previous operating system was Windows Vista business and I just replace it with Windows 7.
  Since I installed it my device Bluetooth does not work anymore.

  I have had no problems with it with my previous Windows.
  Now, the following messages will appear: "Bluetooth stack for windows by Toshiba is incompatible with this version of windows" I have windows 7 Professional.

  I tried to update the drivers, but I was told that I have the best and latest drivers.

  Can someone help me?

  Hello

  Seems that you are still using an old battery Bluetooth.
  You this should remove the system and need to install a new one which you can download here:
  http://APS2.toshiba-tro.de/Bluetooth/

  You can find the pile of BT for Win 7 32 bit and 64 bit version

  Welcome them

• Satellite Pro U400 - How can I get the native screen resolution for external monitor?

  I have a samsung syncmaster external screen connected to a Satellite Pro U400.

  The resolution of the screen goes up to 1280 etc. but the minimum samsung is 1440 x 920 (ish I forgot).
  How can I get the samsung to display full screen expanded to save my eyes of the realativively small screen internal?

  Hello!

  Have you tried to update the display on your laptop driver? Check the Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, it would be interesting to know if you are running the factory settings or you have installed your own version of Windows?
  And what operating system are you using? Have you installed all Windows updates?

  For external LCD, monitors, you must set the screen refresh rate of 60 Hz.
  And if you want to change the resolution of the screen, you must select the second monitor in the graphics options on Windows.

  Good bye

• Satellite Pro L100 (PSLA4E) - can not find updates

  Hiya All,
  anyone would be able to help me to find the updates for my Satellite Pro L100 PSLA4E 009009 FR. I'm not having much luck finding anything. Maybe my model is obsolete?
  I had to apreciate any advise.
  Thank you very much

  Hi Cat_Mandu,

  Your laptop is listed on the European driver of Toshiba download page:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
  * Archive * > Satellite Pro > Satellite Pro L Series > Satellite Pro L100 (PSLA4) > PSLA4E

  As you can see you do research in the Archives to find the driver because your laptop is older model but the driver update always available :)

• Satellite Pro A100-622 can not read the card SD and Memory Stick with Windows Explorer

  I have a Satellite Pro A100-622 running MS Vista Home Basic Edition. I tried to use the card reader integrated with SD and Memory Stick card but cannot view the contents using Windows Explorer.

  In both cases, the laptop recognizes the card and try to install new hardware. Unable to do so, he asks the drive of the software provided with the cards. Any software not provided with a card and I cannot find drivers to make the drive work.

  The only application that I can find on the laptop that is associated with the player is a module of SD formatting, but I don't want to format the card (s) I want to just read the current content of them and add files.

  Any ideas?

  Hello

  You can download the drivers (and especially in your case for the sd-card-reader) here:

  http://PC-support.Toshiba-Europe.com/Vista/

  and here

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  So the other point is the service of the SD card must be enabled in the start menu-> Control Panel (change to Classic view)-> Administration-> Services-> Chip card (at this point, you must activate the service and configure it to start at windows startup).

  If you have any other questions, just ask. ;)

  Good bye

• Satellite Pro L500D - I can not install the ATI from Toshiba page display driver

  I reinstalled Windows 7 Home Premium 64-bit.
  No, I have the problem, I can not install the Ati (HD 4100), downloaded displaydriver from Toshiba for my Notebookmodel.

  > Now, I installed the displaydriver of the model Satellite A500d.
  .and? Doing a job?

• Satellite pro 2100: System can not recognize battery

  Hello!

  I have a problem with my Toshiba Satellite pro 2100, after the upgrade to Windows XP Pro with Service pack 2, my computer is anable to recognize the battery. I also reinstalled Toshiba powersaver drivers on the CD and nothing is better.

  I can work on my computer normally, but it's awful when it sudddenly shot without saving anything when the battery is completed.

  What can I do? Thank you all.

  Blaz

  Hello

  Can you please check under Control Panel Power Options Properties power meter is an indication of the capacity of the battery.

  Also check the settings in Toshiba Power Saver. Under energy-saving Modes, it is running on batteries go Normal, and then click details. Check all the settings in power saving Mode.

  If your problem persists, please write again.

• Satellite Pro M30: Computer does not enter standby mode

  Hi all

  I have a Satellite Pro M30...

  When my computer is in stand-by or is closed, the first keeps flashing orange led and it refuses to start. It reboots only when I unplug the connection and remove and replace the battery several times...

  Anyone knows what is the cause of this and what is the long-term solution?

  Longesson...

  Hello

  As far as I know the light glow orange or flashes while the battery is charging. If it of impossible to turn on the device while the battery is charging so in my opinion, there is something wrong with the electronic power to your laptop.
  You should contact the service partner for help.

  Good bye

• Can not enter text with the keyboard

  We can type in any other application on the computer, but not Firefox. If Firefox is active, keyboard shortcuts do not work. He does not type them into the awesome bar, and we tried 4 different sites with Forms. None of them register typing. We even tried the touch keyboard. It also works in any application, we're trying, but NOT with Firefox. However, the mouse controls work, which is how this information has been entered.

  We use Firefox for our SMEs. It is convenient to have all the saved passwords in a browser. But today, we have to find or reset each of them, although we use another browser until this issue can be cleared.

  Using a Dell laoptop running, updated to Win 8.1 and the latest version of Firefox available for update. Anything that can be updated, has been done.
  Any suggestions?
  .

  He allowed the restart of the computer. It seems to have been connected with recent updates.

• Satellite Pro S300-120 does not start after replacing the CMOS battery

  Hello

  My friends laptop - a S300-120 - was having a few problems.

  I replaced some parts about this before, including a screen crack with no problems.

  However, he began to refuse to start saying "out of battery CMOS, Press F1 to enter setup". Of course you would have to do this, set the date and time, except & restart only to get the same message. We have replaced the CMOS battery with a with the same serial number and now the laptop will not boot.

  It does one of two things.

  It is one) seems to turn, turn to the top disk & CD player, cooling fan is 100%, then flashes the POWER ON led once, twice by orange, and then green to 1/2 second intervals, with no response from the keyboard or LCD.

  Or (b) turns on, turntable, does not turn up to cooling fan, POWER ON witness remains stable, no response from the keyboard or LCD.

  I re-assembled the laptop several times & can not find all the missing fittings or obvious signs of damage.

  The only thing I can think is that the motherboard has been damaged - somehow find replacements is delicate.

  Any ideas?

  Hello

  (> It is a) appears to turn on, turn the disk & CD player, cooling fan goes to 100% and then flashes him

  POWER ON led once, twice by orange, and then green to 1/2 second intervals, with no response from the keyboard or LCD.
  Usually, if the voltage in abnormal feeding malfunctions when IN DC will be blinking orange.

  In my opinion, it looks like a problem with the motherboard :(
  Eventually, you will need to replace the mobo ;(

• Satellite Pro L300-1FN does not start - hang at the BIOS splash screen

  My Satellite Pro L300-1FN refuses to start. When turned on the laptop displays the home screen toshiba/insyde H20 BIOS and the message "press F2 go to the Setup utility, F12 to go to the start menu" and flashes the light access to the hard drive, but don't try to continue loading. I left the bios at the start screen, but it doesn't do anything for long hours on a power supply or is running the battery flat while on battery.

  Is there a way to re - put the BIOS on this unit? If it's a desktop unit I would remove the CMOS battery to force a reset of the BIOS but that's impossible on a laptop. The hard drive is fine because I have it plugged into another system to remove valuable data.

  Hello

  What happens if you press F2 when starting the laptop to the top?
  You can access the BIOS?
  If so, access the BIOS and set its default value. I think you need to press F9 or F10 to get default parameters, but this will be mentioned at the bottom of the page of the BIOS.

  Check it!