Satellite Pro U400 - 15 p hangs after enabling the Realtek RTL8187B WLan card

Similar Questions

• Satellite Pro U400 - network connection lost after suspend

  I have a Toshiba Dynadock. My network is connect directly in dynadock.

  When suspend my Satellite Pro U400 and after reboot to continue working I lost my network connection. Then I shut down my computer and disconnect/connect Dynadock I can continue working.

  What is the problem?
  Dynadock software version is 2.0

  Hello

  I see that you have switched from Vista to XP.

  First of all I recommend you update the BIOS.
  As I m not wrong on the European driver Toshiba page, you should find a newer version of the BIOS.

  You will need to upgrade Win XP to the last State.
  The XP must be up-to-date and all service packs, hotfixes and patches MS must be installed in your laptop.

  Access the Device Manager, and then score in each USB hub root, you must disable the option called allow the computer to turn off this device to save power
  You can find this option in the properties-> tab power management

• Satellite Pro U400 - micro reception problem after installing xp sp3

  I had Vista, then I recently installed windows XP SP3 from scratch (not downgraded). I downloaded the latest drivers from Toshiba and install. Now, I have a problem with the microphone. Speakers audio playback is fine, but the built-in microphone reception level is very low and often unrecognizable. I use a voip program. In Vista, micro worked better.

  Now in Windows XP Home edition, I told myself that they cannot hear me or my voice is very weak and difficult to recognize. I also tried to sound recorder in windows. My voice is as if I am talking about ten meters.
  I have an external microphone, so I can't say if line microphone. works well.

  In messages previous people mention a fix for xp download his questions but I'm not sure if applies to my situation.

  Thank you

  Erdem

  Hello Erdem

  As I see you have CD/DVD for Windows XP SP3 home edition recovery facilities. Everything worked well with the original recovery image? I have way is there a reason why you installed the new driver?
  Were you informed of the new drivers (Tempro) somehow?

  You have installed the drivers who exactly?
  What Satellite Pro U400 you (U400-xxx)?

• Satellite Pro U400-18 s - how to switch the display to TV?

  I recently had a Satellite Pro U400-18 s and I am trying to connect it to my TV. The laptop has only a VGA port and my TV has RCA, S-Video, HDMI and SCART taken. I bought a vga s-video cable, but I am unable to get a picture on the TV.

  This is because the laptop only shows the lowest resolution of 800 x 600?
  Is there a way to lower the resolution of some how that I didn't think?
  I checked and I am running the latest drivers for the graphics card intel?

  Hello

  When you want to connect your laptop to the TV, do the follow-up:
  Connect the cable
  Activate the port S-video on the TV (TV feature how to do)
  FN + F5 key combination to switch to a laptop LCD and TV

  Please let me know if everything is OK or you still have the same problem.

• Satellite Pro L40 does not start after changing the BIOS settings

  Changed some settings in the bios last night and now when I boot I get a screen black lights flash and hard drive lights up but nothing on the screen.

  There is no password on the bios... How would a BIOS reset to normal?

  I put a windows disc now, I hear the disc spin but nothing on the screen

  (I think that I have come to the right place on the forum)

  It s a Toshiba Satellite Pro L40 model psl4be.

  Thank you

  > There was no bios password... How would a BIOS reset to normal?

  You can set the default BIOS ONLY inside the BIOS access BIOS by pressing F2 or at the beginning of the initialization of the order

  But I doubt that this problem is related to the BIOS.
  Maybe it s just a simple bad luck that this problem happened exactly after change something in the BIOS.

  Try connecting an external monitor and check if you can see something on the 2nd screen.

• Satellite A210-183: cannot install the Realtek RTL8187B WLAN XP

  Hello

  I downloaded from the download section of Toshiba, the pilot: RTL8187B_5_6.1135.0625.2008_Silent_Install, but when I try to run the installer, I get the installation program has encountered a problem...

  When I try to manually install the driver from the Device Manager I get the message; driver is not appropriate for this material: "the specified location does not contain ifo on your hardware.

  What can I do?

  Hello

  I don't know about you, but maybe it has something to do with the order of poor facilities. The order of good facilities for this Satellite model is as follows:

  WINDOWS XP HOME SP2
  ATi Display Driver V8.401 - m 070815-052613C
  CardBus Controll Driver Memory Stick 6.0.1.10 Reader /Card
  Synaptics TouchPad Driver V10.0.11.1
  Realtek Audio Driver
  TOSHIBA software modem
  Realtek LAN Driver V5.674.807.2007 cable
  Realtek 802 WirelessLAN. 11a / g Driver V5.1097.718.2007
  Bluetooth Stack for Windows by Toshiba
  Bluetooth Monitor (Build 20070215) V3.01 + ReadMe1st
  UPEK Finger Print Driver version
  Chicony Camera
  TOSHIBA common modules
  TOSHIBA Hotkey Utility
  TOSHIBA Touchpad POWER utility
  TOSHIBA utilities
  TOSHIBA Power Saver
  ... and so on

  Have you started the installation of all the stuff in this order? I have no experience with the Realtek drivers, but maybe it's important to install everything in order.

• Satellite Pro U400-11V - charges only battery when the computer is turned off

  Following a reformatting my hard drive of the computer, my laptop recognizes only the AC/DC power adapter when it is turned off. When the computer is turned on, it does not recognize the AC adapter.

  Changed the power supply ac and it made no difference.

  Have also tried an update of the BIOS (3.0), I am running Windows Vista 32 bit.

  Hello

  I doubt it has something to do with the software or the operating system. In my opinion, that this looks like a hardware problem, because the battery will be always charged if AC/DC adapter is plugged in. That's why it of not necessary to enable this setting in the configuration of the software.

  If your BIOS is already updated, contact an authorized service provider. Technicians can check your laptop and maybe the motherboard needs to be replaced.

• Satellite Pro U400 BIOS update failed - what is the BIOS Boot-block access

  Hello

  My last update of the BIOS has failed and my laptop PSU45E PrU400 Satellite is now out of use.
  I want to use the recovery disk of crisis with a USB floppy drive, but I don't know the key combination to run the boot block.
  Is that someone can help me?

  Best regards

  Hello

  I was wondering what crisis recovery disk you have?  :|
  In my experience the special drive is required, which is available only for ASP technician
  That's why it of necessary to contact the ASP in your country to reflash BIOS.

  In my opinion you shouldn't t try recovery disks of the crisis who loves you in the net, it can drive to the mobo damage

• Satellite Pro U400-15I - wheel of sound not working after installing Windows 7

  The wheel of sound on my Satellite Pro U400 - 15l does nothing after the clean install of Windows 7 to XP pro.
  I used the recommended software update tool downloaded from Toshiba. The VolumeIndicator.exe process is running and the sound works OK - but not under the control of the wheel! The Toshiba power control is not here, but this isn't a problem.

  Any suggestion is welcome.
  Bob Sheppard

  Hello

  Have you tried to update the audio driver of your laptop? You can check from Toshiba Web site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  You may notice any yellow exclamation mark in Device Manager?

• Satellite Pro U400-G13 - "C++ Runtime Error" at startup

  Hey the Toshiba Forum users

  I just bought a Satellite Pro U400-G13
  I turned on and the auto install startet Windows Vista. The inexplicable to the computer.
  After the reboot, a toshiba program starts and requested a restart more.
  After that, I have a "C ++ Runtime Libery Error ' whenever I start the computer.
  If I press OK, the screen goes black in 1 second and the error shows up again.
  It gets to a screen "Please wait" screen to sign in to Windows.

  I can start it in Mode safe, but do not really know what to do with this...

  Y at - it someone who has tried something similar or has good ideas for what I can do...

  Many greetings Asger Benzon

  As Akuma said, have you installed extra RAM? Remove the extra RAM and try without it.

  In your position I would like to reinstall the OS (Operating System). Backup your data first, because everything on the HARD drive will be erased.
  After this, start Notepad, and then press F8 or boot from the recovery disc. Then you can fix the computer. Windows will be reinstalled.

• Satellite Pro U400 - audio quality is not good

  OK this problem has been plaging me for years. I have a Toshiba Satellite Pro U400 windows 8.1.

  The sound quality is terrible.
  I can remember it's bad in windows 7.

  Contextant driver is bad, and so is the generic driver windows 8.1.

  Help, please

  To be honest, I have no idea what you mean exactly by the quality is terrible.
  I've owned a notebook Satellite U400 happened and I have to say that the sound quality was quite good.

  Satellite U400 is a small portable 13.3 and the speakers have been adjusted to the dimensions of the laptop.
  The Conexant audio chip is part of the motherboard and you will not be able to replace it.

  If you want to use another sound card, you can try to use an external USB audio interface.
  I use this external sound solution for my home recording studio.

  The audio interface is connected to the USB port of the laptop s and the external speakers are initiated for the external audio interface.

  By the way: isn't Satellite U400 is the list of the supported 8.1 notebooks... Win so you won't find not all drivers Win 8.1 for this unit on the Toshiba driver website.

• Satellite Pro U400 - 12 p: Vista 64 bit audio driver has no - no microphone

  I have the Satellite Pro U400 - 12 p.
  I installed the Vista 64 bit, because I upgraded the ram to 4 GB.
  Now, Conexant driver does not work.
  Just as it should, even tried downloaded the 32-bit Version.
  None.

  It shows that it can be upgraded, then 'install' file, and at the end, it shows "Failure."
  The cause of it, it shows that I have no audio output installed. = speakrs do not work and the MIC of course.

  Only when I remove the driver in Device Manager and restart the machine, it becomes thin.

  So, what's the problem?
  * The problem is the Microphone does not work! How can I make it work? *

  Please, help me, I am a student, and it takes a lot for studies.

  Thank you much for the help.
  NIR.
  .

  Hello

  It is not easy to say why this is happening.

  Maybe the facilities is order wrong. I send you the facilities for U400 command.
  Try please install all the drivers, tools and utilities following this order of installations.

  Windows Vista SP1
  KB941833
  KB941833
  Module of Chipset Intel (r)
  Intel (r), Robson (iMSM Driver of Intel)
  Intel Crestline-GM / UMA Drive
  or
  AMD M82XT /M86 driver
  Audio driver Conexant CX20561
  Driver LAN Marvell 8040/8055
  Synaptics Touch Pad Driver
  Alps Touch Pad Driver
  Conexant Modem driver
  Modem region Select utility
  Driver Intel LAN wireless Golan/Kedron
  Intel Proset utility
  Atheros Wireless LAN driver
  Realtek RTL8187B Wireless LAN Driver
  Chicony camera software
  Bluetooth Stack for Windows by Toshiba
  CIR Port driver
  TOSHIBA Value Added Package
  TOSHIBA hardware configuration utility
  TOSHIBA supervisor password
  TOSHIBA SD Memory utilities
  AuthenTec AES1610 fingerprint utility
  TOSHIBA ConfigFree
  TOSHIBA WPS library
  TOSHIBA Assist
  TOSHIBA Speech System
  TOSHIBA Extended Tiles for Windows Mobility Center
  TOSHIBA Remote Control Manager
  CD/DVD Drive Acoustic Silencer
  Toshiba HDD Protection
  TOSHIBA face recognition
  TOSHIBA TRS driver
  HDMI Control Manager

  Please post the result.

• Question on the infrared driver for Satellite Pro U400 - 12 p

  I downloaded the infrared driver for Satellite Pro U400 - 12 p
  When I run the Setup, I get an error that says "the installation of the windows package file is not complete" or something like that.

  Anyway, he said that the Setup file is in ruins. Tried downloading it several times.

  Hope I have posted this question in the right forum.
  Thanks for help.

  When you download the driver to extract it to a folder created on your desktop. From there start the setup.exe file. It should work.
  Have you done the same?

• Satellite Pro U400-130 - restarts after shutdown down

  Hello

  I bought a laptop Toshiba Satellite Pro U400-130. The operating system is Windows Vista 32 bit.

  I have a problem when I try to quit the Menu Start-Shut Down laptop. The system will reboot after that. Then if I select closes without connecting to my account, it really stops.

  Please, could you help me with this?

  It's a little confusing because you said if I select shut down without logging in to my account, it really stops.
  Say you stop without connection?

  However, I think you make a mistake.
  Make sure you have all the Service Packs and hotfixes installed for Vista.

  Maybe the button closure is misconfigured. The default action is sleep. To verify this action. Open a command prompt and enter
  Powercfg.cpl, 1
  There you can change the action of power button in the start menu.

• Satellite Pro U400-12y: how to use HDD recovery after the new installation of the OS

  Dear Sir

  I have the Satellite Pro U400-12y and give tem my friend use it when he gets back, the laptops it do format c: and reinstalled new windows.
  I try to do the recovery only by pressing f8 without answering.

  How can I recover my laptop to its state of origin as drive HARD recovery again in d:
  Thanks in adv

  Hello

  You will not be able to restore the factory settings because another operating system has been installed on the first partition.
  Usually by pressing F8 immediately after the laptop has been powered should allow the advanced on-screen menu. Here, you should choose option called repair my computer and Toshiba Recovery HARD drive.

  But if this doesn t work then you will not be able to use HARD drive recovery.
  In this case, you will need to order the new CD from here:

  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye