Satellite Pro U400-15I - wheel of sound not working after installing Windows 7

Similar Questions

• Re: Satellite Pro A200-1NB - Fn keys do not work after installing XP

  Dear all,

  I bought the new laptop A200 1NB.
  Yesterday I have downgrade from Vista to XP everything is fine.

  But a problem arose, some of FN + F key do not work, F5, F6, F7, F8, etc. (FN + ESC, F1, F3 work there).
  Can you tell me what is wrong with my pc and how can solve this problem?

  In the meantime your ASAP solutions,
  Thanks in advance...

  You must update the BIOS to the version of XP, and you must install all available Toshiba XP drivers and utilities.
  It's a secret all ;)

• His Dell Inspiron 1420, microphone and camera integrated into the laptop does not work after installing Windows 7 Professional

  No sound from my Dell Inspiron 1420 and the microphone and built-in laptop camera do not work after installing Windows 7 Professional 64-bit. My laptop has Windows 7 Vista 32 - bit family premium. My laptop is 64-bit capable and after going through the Upgrade Advisor, I installed Windows 7 64-bit. I can hear sounds when I use a headset plugged into the line-in Jack, but not through the speakers built into the laptop. I already tried new drivers from the Dell website, but I could not find.

  Any help will be much appreciated. Thank you.

  As it is has no drivers 64 bit Windows 7 on Dell Web site, your best chance is to install the 64-bit versions of Vista (if they exist) in compatibility mode, viz:

  Right click on the Vista driver, then select Properties > Compatibility tab. Now choose to run the program in Vista compatibility mode and then apply > OK. Right click on the file and select run as administrator to install it.

• NDAS services stopped and do not work after installing Windows 8

  Ladies and gentlemen,

  My Services of NDAS stopped and do not work after installing Windows 8. This is necessary to run my SUNGOO LAN hard drive.

  Does sb know what to do?

  Best regards, Rolf

  Hello

  If I understand correctly the NDAS (Network Direct Attached Storage) service has stopped working after the installation of Windows 8. Is this correct?

  Please provide additional information for a better understanding of the issue.

  1 are you faced with the question of the NDAS service on the computer having the hard disk SUNGOO?

  2. how many computers using the hard disk on LAN?

  Specify the computers with Windows 8.

  3 are the computers in a home group?

  Please post the information requested to receive specific troubleshooting steps.

  Other links

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/NDAs-error-wont-see-drive-after-Win7-install/a004b2a3-9dd4-48a1-9ce7-c289931ba17b

  Why Windows is not find my device?

  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  I hope this helps.

• Satellite P300-1This - Microphone does not work after installing Windows 7

  Hello world.

  At first, I'm sorry for my bad English, so I will say in no time.

  A few days ago, I removed a few programs, and I installed the new Windows 7 operating system. Everywhere I had to download the new drivers for the camera because they do not work. After you download the drivers of the camera, the camera become operative (YES!), but later worked for me, a built-in microphone was out of use. What may be of it with the cause and this driver to download and why the microphone not working?

  I can't talk with friends on Skype ;( Help me. I hope you know what I'm saying.

  Hello

  Do you really install any drivers after installing Windows 7? Maybe you have forgotten something and so it doesn t work.
  Micro is a part of webcam so be sure that driver webcam is properly installed and driver sound, you need to as well.

  After that, check the sound settings. Make sure that the Microphone is enabled and test it again with amp active microphone.

• HP laptop - 14-ac014tx: screen brightness will not work after installing window 10

  I was updating my computer to window window 10 8.1

  But I found that my screen brightnees do not work neither low nor high

  

  

  In addition, my touch of brightness of screen keyboard (F2 & F3) also does not work

  I have no idea how to fix this

  It make me very disappointed because of, I bought the computer in less than 6 months.

  If someone who knew what happens on my computer please help me, it really make me disadvantages

  Hi @weiwei17,
   
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your computer laptop 14-ac014tx HP and questions with your upgrade to Windows 10. Try to use the Windows Update Troubleshooter to fix the problem.

  Here is a document that shows how update the drivers that do not work correctly with Windows 10.

  HP has worked closely with Microsoft on developing for Windows 10. Currently there is no driver available for your system. You can try and check at a later date, because I see new drivers all the time.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that may need updating.

  Thank you.

• Satellite U400-17R - audio device does not work after installing XP

  Hello

  I bought a model U400-17R with Vista Home. I formatted and installed Windows XP Professional download drivers XP Toshiba site.

  Everything works, but my Sound Device does not work. When I check in the Manager of devices the Sound Drivers are there and it says working properly.

  I'm lost... Can someone please help?

  Hello

  I think you have the same problem like me a few months ago.
  I installed Win XP SP2

  The t is not his work because I didn't install the patches MS; KB835221 & KB888111

  The patches must be installed as a first step, before the audio driver is installed.
  If you have already installed the audio driver, then you must remove (uninstall) before install you the patches Ms.

  PS: The MS patches are part of the SP3

• Satellite 3000-400-Accupoint does not work after installing Windows XP

  Hello

  I installed Windows XP (SP3) on my Satellite 3000-400, but the Accupoint II trackball does not work. It is not mentioned in the hardware Manager and I can't find a driver.

  Sorry for my bad English.

  Hello

  Do you mean that you can not use the touchpad buttons too?
  Hmm, sounds a little like hardware delivers what do you think?

  Have you tried to install a driver for touchpad?
  I didn't find the driver for the touchpad for Satellite 3000-400, but I found a satellite 3000-504 (the drivers are placed in the Archive)

  Try to install this driver and check if it helps.

• Satellite L305D - Touchpad does not work after installing Windows 7

  I had recently installed Windows7 32 Bit there is almost a week on my Toshiba Satellite L305D-S5934, and now the tablet to the PC no longer works.

  I was reduced to using an optical mouse on my computer. I've updated all my drivers and firmware etc on the windows update software and still I have not been unable to get the touchpad working. Windows 7 had installed the driver of synaptic for the touchpad pointing stick, but im guessing that he needs a special Tosiba firmware to recognize the touchpad for this model. What should I do to get the touchpad working again?

  Here are the specs of my model:

  PC x 86 ACPI
  64-bit AMD Turion X 2 processor
  ATI Radeon 3100 graphics card
  Synaptics PS/2 Port TouchPad

  I installed Windows 7 on my Satellite Pro P300 and touchpad works properly. The OS is naked and I didn't install any additional touchpad driver.

• Satellite U305-S7467: Chicony 2.0 does not work after installing Vista

  I have install Windows Vista in Spanish in a Satellite U305-s7467 with Vista home premium but the webcam is not working...
  I need suggestions. I have download the drivers from the Toshiba site and it doesn't work too.

  Thanks and byee!

  What Toshiba site? European or OUR support page?

  The right tools, you can find on Toshiba US support page - http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp
  You will find all the stuff for your U305. It is in the list.

• Satellite U300 - 15 p CD/DVD does not work after installing Win 7 64 bit

  Hello guys...

  I have a portable Satellite U300 - 15 p with 4 GB of memory.
  I installed Windows 7 64 bit one mouth a go and after that, the DVD player does not work!
  Someone knows this problem?

  TKS

  This is the error

  SOFTWARE FOR DEVICE DRIVER HAS NOT BEEN INSTALLED SUCCESSFULLY
  * PLEASE CONSULT THE MANUFACTURER OF YOUR DEVICE TO HELP GET THIS DEVICE INSTALLED *.
  HM-ETmSE DGDGAM GSE - E1eNe ATA DEVICE * X * a failed

  Hello

  You must remove the upper and lower registry key filters.
  First remove the CD/DVD drive device manager.

  Then go to the registry and remove the filter top and bottom of this key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  After this reboot of the laptop.

  For more information, check this:
  http://support.Microsoft.com/kb/270008/en-us

• Satellite A100-011 - Bluetooth not working after installing Windows 7

  Hi, I have a Satellite A100 - 011 (PSAARE) and I tried to install windows 7 on it.

  I used the installer of the software of toshiba for windows 7, and in Device Manager, all of the devices seem to be properly installed. (There is a disabled person, or an unknown device). However, I can't have my bluetooth appears or use it. I tried to install the 3.00 Vista bluetooth stack, but it didn't work. Why isn't my bluetooth device and function appear anywhere in windows 7? Someone at - it had a similar problem?

  Let me add that the WiFi is working normally.

  Hey,.

  I m no owner of the Satellite A100 but I think you need more recent Bluetooth software and drivers for Windows 7 to Vista place

  Check Toshiba Bluetooth portal for the latest versions:
  http://APS2.toshiba-tro.de/Bluetooth/

• Satellite L500 - FN + F6/F7 does not work after installing Windows 7 SP1

  After installation of SP1 on Windows 7 64 bit does not work the screen brightness setting! 1.4.1 for Windows 7 64-bit installation Toshiba value added Package not help!

  Need help!

  Hey Buddy,

  > Installation of Toshiba Value Added Package 1.4.1 for Windows 7 64-bit no help!
  You have also all-new version of the Flash Cards Support utility? This tool is also necasary for the FN key function and can be downloaded on the Toshiba page too.

  Check this box!

• NB305-105 - FN keys do not work after installing Windows 7

  Hello

  I'm trying to install Windows 7 64 bit ultimate in netbook Toshiba NB305-105, I have install all drivers, but I can't solve the problem with the WIFI. In particular I don't found drivers for the special key FN to switch on the WIRELESS card.
  I tried different retraction, but nothing. All the drivers are installed but the FN key does not work and even for the WiFi card.

  Please help me or I come to Windows 7 32 bit?

  Thank you

  Hey,.

  You can keep Windows 7 64 bit installed, but I put t understand why you need 64-bit OS on a netbook that doesn't support 4 GB of RAM

  In any case, the FN keys to install the package of added value and utility to Support Flash Cards. These two tools controls the FN keys. They are not listed for your netbook and Windows 7 64-bit, you can download them from another model as Satellite L500.

  I'm pretty sure, they have too much work for your model. :)

• HP Solution Center does not work after installing Windows 10.

  After 10 Windows Installer, Solution Center HP, which is part of the installation of software for my HP Officejet 4500 510nz, tells me that the software is incomplete. The installation disc does not open, so I downloaded the HP program and re-installed. I always get the message that the software is incomplete. HP says they no longer support this printer (bought 24/05/14 - May 25/09/13!) - WOW! ~ printer still print, but will not run the other functions such as scanning, etc., because the HP Solution Center does not start, and HP has abandoned in favor of their product.

  Now what? Should I buy a new printer to replace this year 1 old HP so I can use its features with W10?

  Or, is there a way to fix it?

  This thread has been locked, for more information on HPPIW, please refer to the following support document:

  http://support.HP.com/us-en/document/c02681060

  HP printer Installation Wizard is an application of HP support that helped to download printer software. This support request is no longer supported by HP. This software was last updated was September 22, 2015.

  To download and install the latest version of the software for your HP printer, please visit 123.hp.comor HP support Web site, HP Support Assistant (in English).