Satellite Pro U400 - audio quality is not good

Similar Questions

• Fingerprinting is on Satellite Pro U400-160 - specified database not found

  Hello

  Well, I recently bought a Toshiba Satellite Pro U400. The first day, I took my fingerprints, and all went well.
  The next day, the software reinstalled himself for some reason any... and lost of my fingerprints.
  So I went back to the software TrueSuite Access manager, but this time I had a problem!

  ' *' Error: specified database could not be found ' n ' exact error message no, something similar.*

  I got this message, so I looked in this forum. I discovered that I could reinstall the software, so I did and got the last update, but it's the same thing.

  I don't know what to do, I just installed Office 2007 since I was the computer, nothing else.

  Help, please!
  Thank you very much

  You take the recovery disc and reinstall the OS using the Toshiba disc.
  The laptop must be set to the factory settings/configuration and then you should check if the same error message again.

• Satellite Pro U400 - 13 k - can not connect on Vista - SOLUTION

  Setting of the Romanian regional components at installation time makes you unable to log into vista: Runtime LogonUI.exe error

  Model: Satellite Pro u400 - 13 k.

  No problem:

  Installation of vista start preinstalled, idir a u400 - 13 k,.
  When prompt change to Romanian locale

  Result: after completing the installation of vista program, LogonUI.exe crashes with Microsoft C++ Runtime exception dialog box.

  _Solution: _

  * Restart in mode safe then burn collection amovible.*
  * Restrat configuration then do not change the regional settings *.

  Hope this helps other customers until it is resolved.

  * For Toshiba QA Team *: I spent almost 4 hours to work around your untested product. Please at least fix this bug for other clients, as the time is important to everyone. I guess this can be linked to the logon request is not properly located or crush fingerprints.

  Kind regards.
  sandi_ro.

  US Forum: http://laptopforums.toshiba.com/tshb/board/message?board.id=brd_SatPro&message.id=180

  Hi Sandi

  Thanks for this solution.
  This could be useful for all users who are looking for such a solution here in the forum.

  Greetings

• Satellite Pro U400-SP2804 - Microphone is not listed in the volume control

  Hello
  I can't listen to the microphone from the speaker, because does not appear micro in the Volume control

  On the start menu< control="" panel="">< audio="" devices="">< advanced="" properties="">< volume="" control="">< properties="">

  Mixing: Conexant HD Audio output

  Volume controls:
  Volume control
  Wave
  SW
  CD

  But n - t apeear option microphone or line

  My sound card is Conexant High Definition SmartAudio 221

  I was reading, and I think the problem is: it doesn't have a key in the windows registry value, someone help me, thanks

  I did: reinstall the driver, uninstall the driver and put another card sound, change the operating system, works wth 2 sound cards, portable computer, import registry values from the other laptop. but does not solve the problem.

  My problem appears with Winodws XP 2002 SP3 and Windows Vista professional

  Hello

  The port microphone or line is not because you are looking for this audio * output parameters.
  The microphone is a device of entry so it s not who listed there.

  If you go into the volume settings > options > properties you can switch to HD Audio input.
  Now you can change the volume of the microphone! :)

  Good bye

• Satellite Pro U400-18 s faulty motherboard

  My friend Satellite Pro U400-18 s will not start.
  Pass the initial Toshiba screen, I had to check it out for the PC tech guy, and they could not get pass this screen as well. However, they confirmed that the hard drive has been authorized. They suggest that the motherboard is broken?
  Can anyone help? And where can I get a replacement from? I have no recovery disks, like most of the GUY's, I have not read the instructions.

  Any help would be really appreciated

  Who are these guys from tech PC? Maybe Toshiba service provider?

  To get the new motherboard will be problematic, so I recommend you contact the nearest authorized Toshiba and ask for help. They can order the new Board of Directors for you.

• Satellite Pro U400 VISTA disk management has 6 primary partitions

  Hi all!

  I have a strange effect on my Toshiba laptop Satellite Pro U400 (but it seems not to be specific to this one that I saw the same symptoms elsewhere, at the same time):

  I had the laptop with a 320 GB drive with recovery-(invisible / "Configuration EISA", 1,46 Go) system (C:, ~ 150 GB) and data (E:, ~ 150 GB) volumes. It's the usual structure of Toshiba,

  pre-installed OS was Vista professional.

  As I plan to install Linux in addition, I have done as a result of preparations:

  Recovery disc Vista created 1.).
  2.) C: shrunk to ~ 100 GB using Vista disk management tool.
  3.) E: shrunk to Go ~ 98 using Vista disk management tool.
  It is suggested that 4.) E: directly behind C: using Parted Magic CD.

  Finally I got a 97 GB of free space at the end of the disc, and everything worked well away. Creating an additional on the free area, Vista disk management, resulted in an extended partition created by Vista. This extended partition contained the extra volume as well as the free space remaining behind.

  To prepare for installing Linux, I've finally created three logical Volumes inside the extended partition with Vista disk management tool.
  After that, I had the following structure of the partition on the disk (indicated by the Vista Disk Manager):

  invisible 1.46 GB, primary
  C:, ~ 100 GB NTFS, primary, active, System
  E:, ~ 98 GB NTFS, primary, data

  ~ 97 GB extended partition, containing:
  2 GB unformatted (planned for Linux swap)
  20 GB unformatted (planned for Linux root "/")
  21 GB unformatted (planned for Linux "/ home")
  Empty remaining 54 GB space

  More on Vista worked properly!

  Recently, I installed OpenSuse 11.1 using the volumes placed within extended partitions (user-specific configuration). The Installation worked correctly. Logical volumes have been formatted to

  2 GB of swap (swap Linux, / dev/sda5)
  20 GB ext3 (Linux root ' / ' on/dev/sda6)
  21 GB unformatted (Linux "/ home" on/dev/sda6)

  during the installation of Linux. Linux and Vista up and running with their scores. If I look at the hard drive with Linux' partitioning tool, I see three main partitions + range, as expected. The scope contains the Linux partitions + empty disk space.

  HOWEVER:
  ========

  If I look at the hard drive with the Vista disk management tool now, I get the following image:

  invisible 1.46 GB, primary
  C:, ~ 100 GB NTFS, primary, active, System
  E:, ~ 98 GB NTFS, primary, data
  2 GB PRIMARY, no format info displayed
  20 GB PRIMARY, no format info displayed
  21 GB PRIMARY, no format info displayed
  Empty remaining 54 GB space

  This means:
  VISTA DISK MANAGMENT ME PRESENT 6 PRIMARY PARTITIONS WITHOUT ANY COMPLAIN
  Although a hard drive on the PC architecture usually only supports maximum 4 primary partitions.

  Issues related to the:

  Have you ever seen a similar behavior?

  Is this a bug of presentation in the Vista disk management tool?

  Or is it a bug in formatting under Linux?

  Is there a solution for this problem?

  At present, the two BONES work very well. However, the disk will be get permanently damaged as soon as I try to create more partitions in the empty space left?

  Sincere greetings and thanks for your comments.

  Girard

  > Have you ever see similar behavior?
  NO.

  > Is this a bug of presentation in the Vista disk management tool?
  I doubt that it is a bug, I think you forgot something.

  As far as I know you can create 4 partitions on the HARD drive and this is the reason why you have the ability to create an extended partition.
  An extended partition can be divided into several logical drives.

  That is why it s wise to create a primary partition for Windows OS for example and an extended partition, which can decompose the in logical drives (partitions) different.

  However, I put t see a problem if everything works properly

  Welcome them

• Satellite Pro U400-15I - wheel of sound not working after installing Windows 7

  The wheel of sound on my Satellite Pro U400 - 15l does nothing after the clean install of Windows 7 to XP pro.
  I used the recommended software update tool downloaded from Toshiba. The VolumeIndicator.exe process is running and the sound works OK - but not under the control of the wheel! The Toshiba power control is not here, but this isn't a problem.

  Any suggestion is welcome.
  Bob Sheppard

  Hello

  Have you tried to update the audio driver of your laptop? You can check from Toshiba Web site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  You may notice any yellow exclamation mark in Device Manager?

• Satellite Pro U400 - 23 M - a good buy?

  I think of buying a Satellite Pro U400 - 23M. I currently have [Satellite P100-208 | http://uk.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UK&DISC_MODEL=0 & ACTION = PRINT_WITH_BACK & com decided .do w .broadvision = Yes & PRODUCT_ID = 122152] and I'm tired of the hazzle to carry a portable 17 "inches autour, it is also quite noisy.

  I just wanted to get a feedback from you guys about the U400 - 23M series. Here are the specs:

  • Intel Core 2 Duo T5870 2.0 GHz, 2 MB
  • 13.3 "TruBrite® WXGA 1280 x 800
  • 4 GB DDR2 800 MHz - max 8GB
  • 160 GB SATA 5400 RPM / min. S.M.A.R.T.
  • 8 x DVD ±RW burner double layer
  • Intel Graphics Media Accelerator 4500MHD
  • 24-bit stereo high-definition
  • 10/100 ethernet adapter and modem 56 k
  • Wireless 54Mbps 802. 11a / g
  • Battery Li - ion, battery life up to 3 hours (Mobile Mark 2007)
  • 3 x USB2, FireWire, eSATA, Bluetooth
  • Integrated 1.3 megapixel webcam
  • 5 in 1 card reader
  • Audio input and microphone
  • Operating system: Windows Vista Business (standard) with the option of Windows XP Professional
  • Only weighs 2.0 kg (about 4 pounds)
  • 2 years warranty in the world

  I have a few questions for you guys who own a laptop U400.

  Is - this treatment of 64-bit support? I don't know if the Vista operating system that is delivered is 32-bit or 64-bit.
  Run quietly and cool when they surf the web, type in Word and under the easy workload like that? It gets very loud and hot runs more demanding programs such as Photoshop CS3?
  I know that this video card is not ment for gaming, but manipulates her older games like Call of Duty 4?

  Do you recommend this laptop? I tried searching the Internet for customers, but I couldn't find the model U400 - 23M. What are the advantages and disadvantages on this laptop?

  Hi mate

  I n t have the Satellite Pro U400 - 23M, but I m an owner of the Satellite U400-10N.
  I use it in my office all I love this little baby.

  You should know that the U400 has 13.3 display and it of smaller than the P100.
  So you will definitely notice a difference.

  One of my friends said that 13.3 would be too low for him, but for me it s best. I can take everywhere and sometimes I m work while traveling around the world

  So I m very satisfied.

  I ve installed Win XP on this U400 and it s functions perfectly!
  But you can install Vista 64 bit too. The Satellite Pro U400 - 23M uses the Intel Core 2 Duo CPU T5870, that supports 64-bit

  But note; the U400 is not really a cellphone game hardcore.
  My U400 supports an Intel graphics chip and usually I only use it for office, graphic design (web) applications and web browsing.

• Satellite Pro U400 - sound of the wheel does not work anymore

  The wheel of sound control in my Satellite Pro U400 works not properly since last month.

  Now, I have to use the volume bar in Vista to adjust properly. When I try to lower the volume by turning the wheel, as I did before, he constantly increases the volume after reducing to a few percent. If I flip it is very very slow, sometimes it decreases the volume a little, but other times it increases. Also when I'm in a word processor, turn the wheel to the right input 'c' character ' on the screen.
  There is no problem when I try to increase the volume, it does its job.

  Do you think it is related to hardware or can it be a problem of driver or something. Is there a solution?

  Thank you

  Hello!

  In your case, I would setup a pilot of his most recent. Search on the Toshiba site and check:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  I had this problem on another laptop Toshiba also and after reinstalling with the recovery disk the problem has been resolved. I also tried updating the drivers and so far, but without success.

  Good bye

• Satellite Pro U400 - 12 p: Vista 64 bit audio driver has no - no microphone

  I have the Satellite Pro U400 - 12 p.
  I installed the Vista 64 bit, because I upgraded the ram to 4 GB.
  Now, Conexant driver does not work.
  Just as it should, even tried downloaded the 32-bit Version.
  None.

  It shows that it can be upgraded, then 'install' file, and at the end, it shows "Failure."
  The cause of it, it shows that I have no audio output installed. = speakrs do not work and the MIC of course.

  Only when I remove the driver in Device Manager and restart the machine, it becomes thin.

  So, what's the problem?
  * The problem is the Microphone does not work! How can I make it work? *

  Please, help me, I am a student, and it takes a lot for studies.

  Thank you much for the help.
  NIR.
  .

  Hello

  It is not easy to say why this is happening.

  Maybe the facilities is order wrong. I send you the facilities for U400 command.
  Try please install all the drivers, tools and utilities following this order of installations.

  Windows Vista SP1
  KB941833
  KB941833
  Module of Chipset Intel (r)
  Intel (r), Robson (iMSM Driver of Intel)
  Intel Crestline-GM / UMA Drive
  or
  AMD M82XT /M86 driver
  Audio driver Conexant CX20561
  Driver LAN Marvell 8040/8055
  Synaptics Touch Pad Driver
  Alps Touch Pad Driver
  Conexant Modem driver
  Modem region Select utility
  Driver Intel LAN wireless Golan/Kedron
  Intel Proset utility
  Atheros Wireless LAN driver
  Realtek RTL8187B Wireless LAN Driver
  Chicony camera software
  Bluetooth Stack for Windows by Toshiba
  CIR Port driver
  TOSHIBA Value Added Package
  TOSHIBA hardware configuration utility
  TOSHIBA supervisor password
  TOSHIBA SD Memory utilities
  AuthenTec AES1610 fingerprint utility
  TOSHIBA ConfigFree
  TOSHIBA WPS library
  TOSHIBA Assist
  TOSHIBA Speech System
  TOSHIBA Extended Tiles for Windows Mobility Center
  TOSHIBA Remote Control Manager
  CD/DVD Drive Acoustic Silencer
  Toshiba HDD Protection
  TOSHIBA face recognition
  TOSHIBA TRS driver
  HDMI Control Manager

  Please post the result.

• Satellite Pro U400-18 needs - Win8 drivers - microphone does not work

  I HAVE a PORTABLE Satellite Pro U400-18 a PSU45E computer AND I INSTALLED WINDOWS 8 64 bit BUT I can't FIND the DRIVERS WINDOWS 8 FOR MY MICROPHONE. (AUDIO DRIVERS)

  PLEASE CAN SOMEONE HELP? Thank you

  There is no special driver for microphone.
  Audio driver controls the microphone and the noise.

  By the way: what mic do you mean? The intern who belongs to the webcam?
  Only the microphone is working correctly by using an external headset?

• Satellite Pro U400 starts not-cannot start Windows

  So I have no idea what caused this minute, it's nice, I look at things on the next screen thing 4od is empty and not coming back so I hold down the power button to restart and a black "windows boot manager" is displayed and I can not fundamentally get off this page...
  It is said:
  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windowsinstallation drive and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on 'Repair yourconputer.'

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.
  File: \Boot\BCD
  Status: 0xc0000034
  Info: the windows boot configuration data file is missing required information.

  I do not have installation or recovery discs, I used another computer to burn a disc recovery ISO put it in and nothing happened.
  I would like to ring toshiba but I don't have any minutes left this month and I don't have access to another fixed telephone/phone

  I'm really confused as to what to do, each other times as my laptop is messed up, I just did a recovery of hard disk and restored to factory settings by clicking on f8 but it doesn't work this time

  I can't afford a new laptop or taking it to be repaired so if anyone knows what I can do please help!

  Thank you
  Steph.

  Post edited by: Steph92

  Oh I forgot to tell my computer toshiba laptop satellite pro u400
  It came with windows vista preinstalled

  Hello

  I think it is just a software problem (Boot Manager).
  Try to repair the operating system by using HARD disk recovery;
  Press F8 why portable power.
  Then choose fix my computer, then choose disk HARD recovery.

  If this is not possible, order the disk recovery from here:
  http://backupmedia.Toshiba.EU/landing.aspx

  Then, you will be able to reinstall the OS using the recovery disk

• Re: Satellite Pro U400 - 13G: software uninstalled - FN keys do not work

  The other day I uninstalled many programs standard of his Toshiba Satellite U400 - 13G, because it has been very slow in implementing.
  But now I realized that his FN hotskeys does not work.

  I tried to look in the support forum and the list of drivers, but I can't find the answer.

  So the question is what program/driver should I install to get the keyboard shortcuts to work again. It is running vista 32 bit.

  Best looks Anders vangsgaard

  Hello

  Well buddy. For the future I'll give you a tip ;)
  Never remove any parts/software if you n t know what they are for ;)

  The Satellite Pro U400 - 13G seems belongs to the PSU45E series.
  Choose this model number to download driver form Toshiba Europe.
  Then download the package of value added.

  To reinstall this PPV you will need to remove the preinstalled old VAP.
  Do it and after rebooting again to install the new downloaded package added value.

  In my view, that the FN buttons should then work.

• Re: Satellite Pro U400 - Windows could not start, how to recover?

  I hope this is the right forum to display this property (if not, please let me know where I should post this) and nude w / a beginner like me. Any help or direction will be appreciated.

  I have a Toshiba Satellite Pro U400-160 is more than a year. I have not used a lot lately, because I usually use my netbook computer for day to day stuff, but the Toshiba contains some files I want to see lost. That's the message that came when I turned on my laptop for the last time:

  "Unable to start Windows. A recent hardware or software change might be the cause.
  To solve the problem:
  1. Insert your Windows installation disc and restart the computer.
  2. choose your language settings, and then click Next.
  3. click on "repair your computer".

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance

  File: \Boot\BCD
  Status: 0xc000000f
  Info: An error occurred trying to read the boot configuration data. "

  Usually, I store all my software as a whole but I recently changed from home and for the life of me, I can't find the Toshiba recovery system disk. Even if I did, however, which would mean losing all files on my computer?
  My question is, is there a way to fix this without losing all data? Should I first try to save the data somehow and then solve the problem? And finally, how to solve this problem with/without the recovery CD?

  Thanks in advance. Any help will be MUCH appreciated.
  PS. This look is like a virus? What is a windows update that has corrupted some files?

  Hi monstarika,

  You can access the Windows Advanced Boot menu and boot into safe mode?
  If so try also to start the recovery of HARD drive if you choose fix my computer. If the operating system preinstalled by Toshiba is still installed, you can use this feature.

  If this work of t doesn't and you don t have the recovery disc, you can order directly in an enw one of Toshiba. That s no problem because you can order it online here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Satellite Pro U400 - BT does not work after installing Win 7

  Hello.

  I have a problem with my bluetooth device. I have Toshiba Satellite Pro U400.
  My previous operating system was Windows Vista business and I just replace it with Windows 7.
  Since I installed it my device Bluetooth does not work anymore.

  I have had no problems with it with my previous Windows.
  Now, the following messages will appear: "Bluetooth stack for windows by Toshiba is incompatible with this version of windows" I have windows 7 Professional.

  I tried to update the drivers, but I was told that I have the best and latest drivers.

  Can someone help me?

  Hello

  Seems that you are still using an old battery Bluetooth.
  You this should remove the system and need to install a new one which you can download here:
  http://APS2.toshiba-tro.de/Bluetooth/

  You can find the pile of BT for Win 7 32 bit and 64 bit version

  Welcome them