Satellite Pro U400 - BT does not work after installing Win 7

Similar Questions

• Re: Satellite L20-112 - WLan does not work after installing Win XP

  Hello

  I reinstalled Win XP on my old laptop, and all my drivers disappear.
  I downloaded all the drivers on the official website of Toshiba, and unfortunately the wifi does not work.

  My Notebook: satellite l20 - 112 psl2xe, win xp sp3, sticker for computer laptop-atheros WiFi-.

  Thank you in advance.

  Hello

  This means that you need a WLan driver or what do you exactly by wifi does not work?

  Do you know what WLan card you have exactly?
  You could install the hardware like Everest Home Edition diagnostic tool which would provide information on the WiFi chip.

  PS: Here are all of the WLan drivers:
  http://APS2.toshiba-tro.de/WLAN/

  Welcome them

• Satellite Pro L550 - WLAN does not work after Installation Win 7/64 Pro News

  Hello

  I installed a true Win 7 / 64 professional version full on my Satellite Pro L550-199, PSLW9E. Now, I can't turn on my WLAN. There is no such thing as the large buttons-FN. I tried a lot of driver, that I found on the Toshiba Support page.
  Whitch is the right, or Win 7 / 64 professional not supported with WLAN?
  How can I pass on WLAN without the FN key?

  Lenny

  Hello

  To activate the WLan, you need to install the Wlan driver first.
  The wireless network card is recognized correctly in the Device Manager?
  Otherwise, install the WLan driver compatible; As much as I know the WLan card is Realtek RTL8191SE 802.11bgn

  Then once the Wlan card is recognized correctly, you must install the VAP (value added package) and Flash Cards support utility!
  These two tools are required to operate the FN keys and switch WLan using Fn + F8!

• Satellite Pro 6100 Wireless does not work after restoring from HARD drive

  After that restore disks for installing a new HD and use and to update XP sp2, the Wireless does not work and if the card is installed XP hangs then works in fits and starts. If the card not in place, not bad at all.

  Booting from a Linux CD, the card works perfectly! I assume that the driver is the problem. The wireless card is the original, an Agere MPC13A-20/R, with Toshiba p/n PA317U-1MPC.

  I have found some drivers Agere, but am not sure

  (1) if they are correct
  (2) how to install since the machine works in a way limited with the card in place.

  Any advice?

  Hello

  I checked the page of the pilot and the only available for Windows XP WLan driver is the driver of v.1.11.108 Agere.

  (1) just try to install this driver. If the driver is not correct or is not compatible, then windows will not install the driver and you will receive a notification. You just have to try

  (2) generally you may reinstall the driver from the Device Manager. Open network controller tree, and then you can reinstall the driver.

  But this is only possible if the windows started successfully

  PS: Have you checked the information of Microsoft Windows XP SP2 update on the page of the Toshiba driver.
  I discovered that you need to update several utilities if you have installed SP2 on this laptop.

• Satellite U300 - 15 p CD/DVD does not work after installing Win 7 64 bit

  Hello guys...

  I have a portable Satellite U300 - 15 p with 4 GB of memory.
  I installed Windows 7 64 bit one mouth a go and after that, the DVD player does not work!
  Someone knows this problem?

  TKS

  This is the error

  SOFTWARE FOR DEVICE DRIVER HAS NOT BEEN INSTALLED SUCCESSFULLY
  * PLEASE CONSULT THE MANUFACTURER OF YOUR DEVICE TO HELP GET THIS DEVICE INSTALLED *.
  HM-ETmSE DGDGAM GSE - E1eNe ATA DEVICE * X * a failed

  Hello

  You must remove the upper and lower registry key filters.
  First remove the CD/DVD drive device manager.

  Then go to the registry and remove the filter top and bottom of this key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  After this reboot of the laptop.

  For more information, check this:
  http://support.Microsoft.com/kb/270008/en-us

• Satellite 3000-400-Accupoint does not work after installing Windows XP

  Hello

  I installed Windows XP (SP3) on my Satellite 3000-400, but the Accupoint II trackball does not work. It is not mentioned in the hardware Manager and I can't find a driver.

  Sorry for my bad English.

  Hello

  Do you mean that you can not use the touchpad buttons too?
  Hmm, sounds a little like hardware delivers what do you think?

  Have you tried to install a driver for touchpad?
  I didn't find the driver for the touchpad for Satellite 3000-400, but I found a satellite 3000-504 (the drivers are placed in the Archive)

  Try to install this driver and check if it helps.

• Satellite A210: taken micro does not work after installing Vista SP1

  After you have installed SP1 for Vista, had a number of problems and the head is a main & mic Sockets is more work in front of the computer.
  So cannot use Skype etc.

  Any help appreceated

  Bill

  Train from my own experience the SP1 is not fully compatible with the various drivers.
  In case you looks that the audio driver does not work with SP1.

  Don t know what sound card you have (maybe Realtek?), but a sound card driver update would be desirable.
  If it doesn t help you will need to wait until it comes out an update of the audio driver

  CU

• Tecra M10 - 10z - 3 G does not work after installing Win 7

  Tecra M10 - 10z, I installed Windows 7 pro 64-bit
  Everything is correctly configured, but the 3G connection does not work: the message is "no network".
  with Windows XP is ok.

  I can't update the firmware or similar.

  Y at - there someone who can help me?

  TKS

  Hello

  To use the 3 G, you should first check whether the module G ericsson 3 has been successfully installed.
  Where there is a visible yellow exclamation point in Device Manager, the 3G driver must be reinstalled.
  I found on the page of the Toshiba UE driver:
  [Driver Win 7 3 G Ericsson | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 5 & selSeries = 148 & selProduct = 813 selSho rtMod = null & language = 13 & selOS = 30 & selType = 295 & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = 295 & page = 1 & ID = 71930 & DISO =-1 & driverLanguage = 42]

  Additionally, make sure that the 3 G RF power control utility has been installed properly.
  3 G RF Power Control utility"turns your 3 G at the start.

  This tool can be found here:
  [3G RF Power Control utility for Win 7 64 bit, | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 5 & selSeries = 148 & selProduct = 813 selSho rtMod = null & language = 13 & selOS = 30 & selType = 322 & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = 322 & page = 1 & ID = 73658 & DISO =-1 & driverLanguage = 42]

  Hope the 3G network functions the reinstallation of these two tools.

• Thunderbird does not work after installing Win 10 and the mobile profile of Win 7

  I've installed Tbird 38.3.0 on a new Dell computer with Windows 10 on this (8 GB of RAM, 1 TB harddrive). I then followed these steps to put my old profile from the old computer to Windows 7:
  1. copied my profile on the Windows 7 computer on an external drive.
  2 installed Tbird on the new computer Windows 10 38.3.0, but has nothing to do with it.
  3. following the instructions on the site of Thunderbird on the displacement of a profile:

    a) Use the Profile Manager to create a new profile on the Win 10 computer.
    b) Copy the profile from the external drive to the new profile folder
    c) Use Profile Manger to tell Tbird to open the new profile
  

  4. start Tbird.

  I see my files with email in them, but there are problems:
  1. None of the Tbird dialog boxes open when I choose a command in the menu bar (including the new Message).
  2. I can't get Tbird to display the contents of a folder in the Home tab. There is only the accounts and the advanced features of the Inbox, display in the right pane, next to the folder tree. The only way to see the contents of a folder is right-click and choose open in a new tab.
  3. when I click or double-click on a folder, the contents of the file does not replace the previous folder. TBird on the Windows 7 computer, clicking a folder displays the contents of the new folder.
  4. sometimes when I Alt + Tab of Tbird, then Alt + Tab, moving the cursor of the mouse on the messages in the Inbox tab causes the message object, Date,... to disappear, leaving blank lines.

  I tried to uninstall Tbird and reinstall it, but this does not solve the problem.
  I tried to reboot Windows 10 but that does not solve the problem.
  I don't seem to be able to download email and preview in the messages pane, but I can't open it in a separate window.

  A lot of people seems to be able to run Tbird on Win10, so it should work. Any ideas on why it does not work and what I can do about it?

  Thank you very much in advance!

  go to add-ons.
  remove the addon of lightning.
  restart - everything should be good.
  If you still need the addon of lightning, install it again - it should give you a new version.

  Please tell us that all is well

• Webcam does not work after installing Win 7

  Help, please. Ive recently installed Windows 7 32 bit on my laptop dv2050us and now my built-in webcam does not work. When I turn it on in Skype, the blue light comes on but the screen is completely black.

  Sincerely, Alvin

  Get the latest version of SKYPE od,

  This is a good Win 7 Setup document

  http://support.HP.com/us-en/document/c01971745

  or

  see if it works with YOUCAM-

  http://h10025.www1.HP.com/ewfrf/wc/genericSoftwareDownloadIndex?cc=us&DLC=en&LC=en&softwareitem=ob-58972-1&JumpID=reg_R1002_USEN

  If it doesn't work with this SW - check in the Device Manager to see if you have a yellow fringe or error messages in the Imaging section. -Try to uninstall the driver and reinstall it again.

• Satellite P300-1This - Microphone does not work after installing Windows 7

  Hello world.

  At first, I'm sorry for my bad English, so I will say in no time.

  A few days ago, I removed a few programs, and I installed the new Windows 7 operating system. Everywhere I had to download the new drivers for the camera because they do not work. After you download the drivers of the camera, the camera become operative (YES!), but later worked for me, a built-in microphone was out of use. What may be of it with the cause and this driver to download and why the microphone not working?

  I can't talk with friends on Skype ;( Help me. I hope you know what I'm saying.

  Hello

  Do you really install any drivers after installing Windows 7? Maybe you have forgotten something and so it doesn t work.
  Micro is a part of webcam so be sure that driver webcam is properly installed and driver sound, you need to as well.

  After that, check the sound settings. Make sure that the Microphone is enabled and test it again with amp active microphone.

• Bluetooth does not work after installing Win 8

  Hello

  I just upgraded my Win7 to Win 8. However, after I finished, I found that my Bluetooth is not function.
  Here is information on Pc:

  OS: Windows 8 Enterprise 64-bit
  Model: TOSHIBA Satellite PSK2YL-0NU02Q L755
  Questions: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) [USB - 10 Toshiba Bluetooth controller]
  For your information, I already uninstalled the driver, but when I click on the button refresh, the pilot return to the high slot the Bluetooth device in the Device Manager dialog box. Beside that, I also try to download the driver on the TOSHIBA site but its impossible to install.
  Help please, thank you.

  Hi dominicp

  It still does not. I think I have to wait for the driver to Win 8 of TOSHIBA. In any case, thanks for your help.

• Qosmio X 70-A-12 X - webcam does not work after installing Win 8.1

  I installed Windows 8.1 update.
  Webcam no longer works. If I have installed other OS, it works... This isn't a hardware problem.

  What is a driver available that must be installed for Windows or Windows Update 8.1 8.1?

  No idea why does not?

  Hello

  There is no driver special webcam for win 8.1

  The point is that Win 8 driver as well as Win 8.1 already contain standard webcam and so the webcam should not need additional driver.
  Of course, the driver for the webcam is necessary if you are using Win 7

  Question: have you installed the driver for the Toshiba system to Win 8.1?
  What is the status of webcam in Device Manager?
  The webcam has been correctly activated?

• Satellite A300-243: CD/DVD-ROM does not work after installing Win 7

  Good day to all!

  I have a huge problem with my CD/DVD room.
  I've updated my A300-243 Satellite with windows 7 and now I can't burn DVDs, CDs, the DVRW.

  But when I had Windows Vista everything was normal. What should I do?

  Post edited by: Qualy

  Hello

  I'm not sure if this will help but try this:
  Go to Device Manager and remove the drive from the list of devices CD/DVD.

  Then beginning of the registry (regedit.exe) and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  After this reboot of the laptop.

• Satellite 2400 - 103: sound does not work after installing SP2

  Hello!
  I had to install Windows XP Service Pack 2 to keep my Windows Update. Unfortunately, my audio device does no more work because XP is considered a potential threat.
  When first, I installed SP2 last year and saw that I had no sound on my PC, I just uninstalled it because I didn't know what to do for my sound card.
  Now that I have to install it, I must do something for this sound card (as a music lover, I am not not to be able to listen to it).

  Could you please tell me if Toshiba has created a code for this problem? The devices dialog box tell a Code 48. I'll contact Yamaha?
  Thanks a lot ofr your answers.
  Good bye
  Catherine

  Hello

  Have you checked the page of the Toshiba driver to update the audio driver?
  If this isn't the case, then do it!
  I visited this site and find a sound driver of Yamaha. The update is on 14/01/05 and all other drivers are since 2002. So I guess that the audio driver has been updated on the page.

  So download the driver and install it on your laptop!

  Good luck