Satellite Pro U400 - network connection lost after suspend

I have a Toshiba Dynadock. My network is connect directly in dynadock.

When suspend my Satellite Pro U400 and after reboot to continue working I lost my network connection. Then I shut down my computer and disconnect/connect Dynadock I can continue working.

What is the problem?
Dynadock software version is 2.0

Hello

I see that you have switched from Vista to XP.

First of all I recommend you update the BIOS.
As I m not wrong on the European driver Toshiba page, you should find a newer version of the BIOS.

You will need to upgrade Win XP to the last State.
The XP must be up-to-date and all service packs, hotfixes and patches MS must be installed in your laptop.

Access the Device Manager, and then score in each USB hub root, you must disable the option called allow the computer to turn off this device to save power
You can find this option in the properties-> tab power management

Tags: Toshiba

Similar Questions

  • Satellite Pro U400 - 15 p hangs after enabling the Realtek RTL8187B WLan card

    Hello

    I recently bought the Toshiba Satellite Pro u400 - 15 p. This notebook is originally without any operating system included. I installed Windows XP Home SP3 on it and downloaded all the drivers from the Web from Toshiba website. Everything works well except the WiFi - RTL8187B.

    Driver has been installed correctly, when I turn the WLAN on everything is always OK, but when I connect to a network wireless Windows XP hangs after some time - without notice or BSOD - and the only thing I can do is to restart the PC holding down the button for 5 seconds.

    I have:
    -installed the latest BIOS (v3.70),
    -installed the last version of drivers available (v6.1150.1112.2008)
    -tried how it works on Vista Home Basic - it does not either, but on Vista only connection must be reset.

    I searched on the web (perhaps not all), including this forum, but I was unable to find a solution.
    Now I am seriously considering warranty claim, please help me to avoid that it ;)

    Hello

    It's really strange.
    Are you sure that this happens because of the WLan card activated 100%?
    I mean there could be another reason for this gel

    I'm U400 too and I m running Win XP and Vista without problem!
    At that time, I m using WiFi and everything works ok

    I think it s not a Wlan related question, but there must be another reason why this laptop locks maybe a problem of RAM or something like that.

  • Satellite Pro U400 - micro reception problem after installing xp sp3

    I had Vista, then I recently installed windows XP SP3 from scratch (not downgraded). I downloaded the latest drivers from Toshiba and install. Now, I have a problem with the microphone. Speakers audio playback is fine, but the built-in microphone reception level is very low and often unrecognizable. I use a voip program. In Vista, micro worked better.

    Now in Windows XP Home edition, I told myself that they cannot hear me or my voice is very weak and difficult to recognize. I also tried to sound recorder in windows. My voice is as if I am talking about ten meters.
    I have an external microphone, so I can't say if line microphone. works well.

    In messages previous people mention a fix for xp download his questions but I'm not sure if applies to my situation.

    Thank you

    Erdem

    Hello Erdem

    As I see you have CD/DVD for Windows XP SP3 home edition recovery facilities. Everything worked well with the original recovery image? I have way is there a reason why you installed the new driver?
    Were you informed of the new drivers (Tempro) somehow?

    You have installed the drivers who exactly?
    What Satellite Pro U400 you (U400-xxx)?

  • Satellite Pro P200: network connectivity is not stable

    I have a Satellite Pro P200, which was downgraded from Vista to XP Pro SP3 corporate.

    I use a sensitive enough network application that will crash when network connectivity is lost.
    This application has been blocking a lot since I downgraded to XP, so I tried to run a continuous ping that gave rise to many messages Request Timed Out (the maximum number of attempts where I actually had ongoing responses was about 30 but is usually much less).

    I use the driver downloaded from the Support from Toshiba site (Realtek RTL8139/810 x Family Fast Ethernet Nic - v5.664.205.2007), wireless network works fine, tried to connect to the network using a cable and a port different without change, and using a different laptop with the same cable and port works fine.

    The yellow exclamation mark in Device Manager is a memory PCI controller which I believe is for the Intel Turbo Memory, because it is not compatible with Windows XP.

    Any ideas what could be the cause.
    I tried reinstalling the driver several times without success, it is likely to be software partners or could it be a hardware failure?

    I think it's related software and troublemaker is SP3. Test it with SP2 only and it will work perfectly. Friend of mine noticed permanent data LAN transfer interruptions after installing SP3. Remove everything works well again.

  • Satellite Pro C850 Wi - Fi lost after updating BIOS

    Today I received the notification of an update of the bios,

    I completed the update of the bios, but when the laptop restarts I had lost the Wi - Fi connectivity and now cannot connect via Ethernet.

    I looked online for answers, but the links I presented m with doesn't seem to work.

    I think I need to restore the bios to the previous version but can t find what to do.

    I have a Satellite Pro C850 - 14 c

    Will you please help if you can because it's ridiculous for Toshiba released a update that actually loses some of the functions to portable computers, especially the main function of a laptop that is portability.

    Thanks in advance

    What do you mean with lost?
    You can enable and disable the wireless network card?

  • Satellite Pro C870 - Internet connection fails after a fashion 'sleep'

    SATELLITE PRO C870-19N. Internet through an ethernet cable. Windows 8.1

    Hello

    My problem:
    I turn on the computer. It recognizes the connection internet (Ethernet cable). I work without any problem... and I left (a few minutes)... I come back. Black screen, computer sleeps. I wake it up - I have to enter my password - and he says there is no internet connection... I have to stop it and restart it.

    Can you help me?

    Thank you.

    This problem occurs using only the LAN connection or have you noticed the same situation using Wireless LAN?

    In case this happens only by using the LAN connection, I recommend you to check if you can update the LAN driver.

    You can also right click on the network icon (in the taskbar) and could choose to diagnose and repair.

  • Satellite Pro L650 - network driver Pb after re - install Win7

    Good afternoon.

    A laptop computer was infected with a virus, so I re - install Win 7.
    My problem is that all network devices don't have 'no driver for this device.
    I install the drivers I download, but the problem is the same.
    When I view the list of devices, the 3 devices 'unmanned' are:
    -Network controller
    -Ethernet controller
    -Controller PCI (for simplified communications)

    When I view hidden devices, I see 8 network cards "Miniport".

    Please, help me...
    Thank you.

    Best option for you is to reinstall Windows 7 using original recovery image (operating system) you got with your laptop. This recovery image contains all the necessary drivers for all hardware components.

    You have installed the Win7 clean version, right?
    What Satellite Pro L650 you have exactly (L650-xxx)?

  • Network connection lost after standby on Satellite P200

    Hello

    Laptop Satellite P200
    OS VISTA 32

    When I stop to work with the laptop, I usually close monitor and when next time open computer laptop lost WIRELESS card.

    Then I have to renew the configuration IP and internet begin to work.
    Anyone know why and how to avoid it?
    End I want to continue using boot options.

    TNX for any idea

    Sandi

    Hello

    In your case, I recommend updating BIOS and to enable the option to Wake up on LAN in the BIOS and Vista.

    In Vista, you can enable it in Device Manager-> properties-> Advanced tab LAN card

    In addition, an update of the LAN driver would be desirable.

  • Satellite Pro U400-15I - wheel of sound not working after installing Windows 7

    The wheel of sound on my Satellite Pro U400 - 15l does nothing after the clean install of Windows 7 to XP pro.
    I used the recommended software update tool downloaded from Toshiba. The VolumeIndicator.exe process is running and the sound works OK - but not under the control of the wheel! The Toshiba power control is not here, but this isn't a problem.

    Any suggestion is welcome.
    Bob Sheppard

    Hello

    Have you tried to update the audio driver of your laptop? You can check from Toshiba Web site for an update:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    You may notice any yellow exclamation mark in Device Manager?

  • Satellite Pro U400-130 - restarts after shutdown down

    Hello

    I bought a laptop Toshiba Satellite Pro U400-130. The operating system is Windows Vista 32 bit.

    I have a problem when I try to quit the Menu Start-Shut Down laptop. The system will reboot after that. Then if I select closes without connecting to my account, it really stops.

    Please, could you help me with this?

    It's a little confusing because you said if I select shut down without logging in to my account, it really stops.
    Say you stop without connection?

    However, I think you make a mistake.
    Make sure you have all the Service Packs and hotfixes installed for Vista.

    Maybe the button closure is misconfigured. The default action is sleep. To verify this action. Open a command prompt and enter
    Powercfg.cpl, 1
    There you can change the action of power button in the start menu.

  • Satellite Pro U400 - 13 k - can not connect on Vista - SOLUTION

    Setting of the Romanian regional components at installation time makes you unable to log into vista: Runtime LogonUI.exe error

    Model: Satellite Pro u400 - 13 k.

    No problem:

    Installation of vista start preinstalled, idir a u400 - 13 k,.
    When prompt change to Romanian locale

    Result: after completing the installation of vista program, LogonUI.exe crashes with Microsoft C++ Runtime exception dialog box.

    _Solution: _

    * Restart in mode safe then burn collection amovible.*
    * Restrat configuration then do not change the regional settings *.

    Hope this helps other customers until it is resolved.

    * For Toshiba QA Team *: I spent almost 4 hours to work around your untested product. Please at least fix this bug for other clients, as the time is important to everyone. I guess this can be linked to the logon request is not properly located or crush fingerprints.

    Kind regards.
    sandi_ro.

    US Forum: http://laptopforums.toshiba.com/tshb/board/message?board.id=brd_SatPro&message.id=180

    Hi Sandi

    Thanks for this solution.
    This could be useful for all users who are looking for such a solution here in the forum.

    Greetings

  • Satellite Pro U400-11V - Sharp noise when starting with connected screen

    Hello

    We received 5 x computers laptops Satellite Pro U400-11V, are excellent, with one exception:

    When you start (it happens on all of them) with a screen VGA monitor plugged in, a high beep is played from what looks like the speaker system. It occurs just before the first splash screen windows.

    Once the windows login screen is displayed a monitor can be connected to any problem & works very well.

    What can I check? I have had a look but do not find all the tracks so far, where this post.

    Thank you
    -A

    Perhaps you are meaning that the beep POST (Power on self test)?

    The laptop still sounds if the POST has been successfully passed.

    Parts of the motherboard will be verified during POST, and if everything is ok, a beep is displayed.

    If something would be a mistake, the laptop will not start and different beeps would appear.

    Welcome them

  • Satellite Pro U400 Win 7: flashing projector connected to Dynadock U10

    I have a number of Dynadocks U10 and Toshiba Satellite Pro U400 laptops.

    They are used to allow our teachers to move from one room to the other without having to connect and disconnect several cables. We use a vga connection to a projector for the external monitor.
    Everything worked pretty well until we put Win 7 on laptops.

    Now, at random intervals, the external monitor will blink.
    I tried the most up to date drivers and software found elsewhere in these forums.
    If I plug the projector directly into the laptop, the flashing stops.

    Can someone please help avoid losing me my mind completely.

    Thank you.

    > If I plug the projector directly into the laptop, the flashing stops.

    I think it means that the VGA of Dynadock pilot must be upgraded to Win 7 compatible version.
    There is nothing wrong in using a direct connection to the laptop, so I think there must be a problem with the driver Dynadock.

    The latest Dynadock graphics card drivers can be found here:
    http://www.DisplayLink.com/support/downloads.php

  • Cannot connect by Satellite Pro U400 - 13 k with mobile phone via BlueTooth

    I have a laptop Sony-Ericsson (cyber shot 905) and I can not connect with my computer laptop Toshiba Satellite Pro U400 - 13 k.

    I mean the bluetooth connection.

    What should I do?

    Make sure your Bluetooth is running on the side of the laptop.
    Ensure that Bluetooth is activated on your phone and it is detectable.
    What you intend to do?
    Using XP or Vista?

  • Satellite Pro U400-12y: how to use HDD recovery after the new installation of the OS

    Dear Sir

    I have the Satellite Pro U400-12y and give tem my friend use it when he gets back, the laptops it do format c: and reinstalled new windows.
    I try to do the recovery only by pressing f8 without answering.

    How can I recover my laptop to its state of origin as drive HARD recovery again in d:
    Thanks in adv

    Hello

    You will not be able to restore the factory settings because another operating system has been installed on the first partition.
    Usually by pressing F8 immediately after the laptop has been powered should allow the advanced on-screen menu. Here, you should choose option called repair my computer and Toshiba Recovery HARD drive.

    But if this doesn t work then you will not be able to use HARD drive recovery.
    In this case, you will need to order the new CD from here:

    https://backupmedia.Toshiba.EU/landing.aspx

    Good bye

Maybe you are looking for