Satellite problem BIOS L750 - cannot change the boot sequence

Similar Questions

• VMware Workstation BIOS 9 - cannot change the boot sequence

  I have a Windows 2003 server that has almost zero space on the C drive, so I'm trying to start a utility disk so I can I repartition.

  HOWEVER... F12 not letting me NOT select a different boot device. If I go into the BIOS and go to the start menu, I see the hard disk and not the CD is at the top of the list and there is no way to change the boot order. Up, down and '+' and '-' keys don't do. The machine is a version that compatible with 6-7, but I shouldn't have to level 9 (I think, anyway).

  The boots of the virtual machine so fast but after that everything a 100 attempts I can't else primary hard drive to boot first.

  TIA

  Kevin

  With VMware Workstation (or at least tab of the virtual machine) closed, add

  bios.bootDelay = "5000".

  to the virtual machine's .vmx file. This will add a 5 second delay for the startup process that will allow you to hit the "ESC" key to the start menu and to attach an ISO or CD image to the virtual machine. Make sure that the virtual CD-ROM presents itself as 'Connected' before proceeding with the selection of the boot device.

  André

• Cannot change the boot sequence in the bios

  Hello world!

  I use vmware fusion 3.1.1 (282344) (in fact has happened since I started from 3.0). A home edition of Windows XP is installed in the bootcamp partition and is used as the guest operating system. When I start Windows XP, it always first try to boot from the network, which takes about 1 min (this can be ignored by hitting the ESC key however). Even if I enter the bios settings, the starting sequences is not editable, where "everything on this menu is not editable in user mode. If all items require changes, consult your supervisor system"is written. However, no password supervisor and of course, I'm not using the 'user '. Does anyone have any ideas on this?

  PS: a full Linux guest OS (installed in fusion and is wrapped up as a file) has no problem to change the boot sequence.

  Best regards

  PrestonXu

  All items of this menu cannot be changed in user mode. If all items require changes, consult your supervisor system

  Weird, I never heard of this message before. You get this when you start merging, not in native mode? I would have asked if someone had made changes to the BIOS settings until you got to the virtual machine, except that you said it's Boot Camp, so I think it's less likely.

  You can try to change the boot order in the Virtual Machine > settings > advanced > boot device.

• Cannot change the boot sequence

  Hello

  I'm trying to change my boot order, so that I can boot from a DVD on my laptop Pavilion (E8A72UA #ABA).  I pressed ESC to get the boot menu.  The menu says:

  F1 system information

  F2 System Diagnostics

  F9 boot device Options

  F10 BIOS Setup

  F11 recovery system

  ENTER - continue starting

  I tried pressing just F9 and Fn + F9 to get Boot Options and no job.  When I press Fn + F1 I can go to the screen that displays system information.  However, F2 and F9, F10 and F11 do nothing.  When I press Enter, it boots into Windows.

  I am doing something wrong or there at - it something wrong with the laptop?  The function keys work fine when I start in Windows, so I don't know that the function keys are not violated.

  Thanks in advance.

  Hello

  Once the unit is on keep tapping F10 key it will take in the settings menu of the BIOS.

  Then selected System Configuration then start Option, then boot order.

  Then change the setting you want to do. Press F10 to save the changes and exit the screen.

• ORA-02283: cannot change the boot sequence number

  Hi guys,.
  
  I want a sequence of changes starting number of 127657 to 8211200... But im not able to change the starting number please someone can help me.
  
  current is
  CREATE SEQUENCES WH1. INVOICENUM_SEQ
  START WITH 127657
  INCREMENT BY 1
  NOMINVALUE
  NOMAXVALUE
  NOCYCLE
  NOCACHE
  ALL
  
  
  ALTER SEQUENCE WH1. INVOICENUM_SEQ
  START WITH 8211200
  INCREMENT BY 1
  NOMINVALUE
  NOMAXVALUE
  NOCYCLE
  NOCACHE
  ALL

  Yes - the norm is to change the increment to a number that will make the bridge, a single call to NEXTVAL and then change the increment to return to what it was.

  ALTER SEQUENCE mySeq  INCREMENT 8000000; -- use the value that is the difference between the current value and what you want it to be
  
  SELECT mySeq.nextval from dual;
  
  ALTER SEQUENCE mySeq INCREMENT 1;
  

• Cannot change the boot options. cannot depend on a windows Defender

  Cannot change the boot options. error message says "Windows Defender is disabled". cannot depend on windows Defender.

  If you use Norton, McAfee, AVG, MSE etc., they will be either disable or conflict with the Defender.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads

  For questions of security program, kindly ask in the Security Forum.

  See you soon.

  Mick Murphy - Microsoft partner

• Compaq presario cq61: change the boot sequence

  I have 10 Windows upgrade on my compaq Presario cq61 free. I want to do a clean install of Windows 10. I downloaded the tool of Microsoft Media, made a key USB and DVD containing the clean install. I am told that the use of the flash player, I have to change the boot sequence in the bios. I tried everything from ESC, all numbers F and LED to try to enter the bios and all have failed. Told me that all I had to do with the DVD was just put it in and start the computer and the laptop would boot from the DVD and I could make my own installation from there. Which also failed. The only thing I have not tried is downgrade to Windows 7, affecting Windows 7 back to factory settings, then reinstall the free update of Windows 10. I would not have to go through all if I mostly because I bought the laptop from a friend and it was installed at the factory of Windows 7 and I don't got no disc software to the computer so I don't want to screw up and drop windows 7 without the appropriate software reinstall to match the product key.

  Any help to enter in the bios or advice that could help me reach my goal would be greatly appreciated.

  Hello

  Here are some other suggestions.

  1. start the machine in Windows 10.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close any open windows and stop the laptop by right clicking on the icon from the Start Menu, then select prompt (Admin) and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Tap on the ESC key as soon as you turn it on and see if it will now access the Start Menu.

  2 try to connect a keyboard external usb and see if this will allow you to access the Start Menu.

  Kind regards

  DP - K

• Change the boot sequence

  Hi all

  I was wondering if anyone has a guide step by step (with pictures) on how to change the boot sequence (I'm not interested by a particular brand of PC or a particular Windows).

  Thanks in advance :)

  Adam

  There are a few different ways to access a page of options boot menu at startup

  Bios legacy would use the delete key

  UEFI BIOS would use F8

  Each you could enter the bios and select the or change the first device to boot cd / dvd drive is usually first "inline"

  Some uefi bios and or install uefi, you may enter win - 10 or 8 - 8.1 and turn off the quick start first in = power options change what the button of power before you could even get into the bios because of the characteristics of secure of the two of them start.

• Satellite R630-141 - cannot change the boot order

  I have a Toshiba R630-141 and I'm changing the boot order in the Bios, but the Bios does not allow me to choose my cd drive or a USB drive as the startup disk.

  I've updated the Bios today to the latest version, thinking that I need the latest version but still the Bios allows me to change the order.

  The problem is the screen flashes only when I'm in the form of change of boot order. When I select the upper and down arrows to select an option in the box just blinks and does not allow me to select any option.

  I tried the tab key, the number keys basically all of the keys that I on the keyboard, and still, I can't select usb or cd drive so I have to quit and restart.

  Any ideas would be appreciated.

  Hi scarpentier,

  You can change the boot order in the BIOS and booting from another boot device? Go into the BIOS and change the boot order. Enter a startup disk (e. g. Toshiba recovery disc), save & exit the BIOS Setup. The computer will restart and should boot from the CD.

  Check this box!

• Re: Satellite A50 - how can I change the boot with BIOS password priority?

  I have a Satellite A50. I need to restore to factory default to recover DVD, how do I boot from the DVD?

  The default boot priority is the HARD drive and is more bootable has been formatted. My BIOS is password protected, how can I change the boot priority? After having inserted the password, its always boot from the HARD drive.

  Thank you

  The boot priority, that you can change in the BIOS.
  Go into the BIOS with ESC, enter your password and then you can change it.
  But don t forget to save the changes.

  That s all and then you can boot from the CD.

• envy dv7: need to change the boot sequence in the BIOS

  I'm trying to get to the boot sequence settings in the BIOS and I forgot the administrator password. Trying unsuccessfully to Afgter 3, I get the message according to 50902428. Can you help me get?

  When asked for the password, try 45660408

• Windows 7 cannot change the boot order

  I get an error message saying that windows 7 cannot change my boot order... I have a made-to-measure, someone has any ideas simple and logical pc how bypass this error

  Oh I have need help, regardless i more thought to it... just need a new hard drive... right weird?

• Display failed on the Satellite P100-434 - need to change the boot order

  Hello
  My Satellite P100 suffered a failure of the display last night. I can confirm that the backlight is working but I do not get a display.
  I think it's to reach the windows logon screen, certainly the disc is rotating upward and if I plug an external floppy drive in, the system reads what it wouldn't if it did not clear the message.
  Is what I would try booting from the dvd, but I need to know the keystrokes and above all, the timings.
  I think memory, it's F12 on first boot, but not sure after that.
  Running Windows 7 Home premium.
  Sorry for the lack of information, by making this post via my Nokia.

  > What I would try is booting from the dvd, but I need to know the keystrokes and, especially,.

  Try F2 or esc (it can also be a delete key)

• SRM 4.1.2 - cannot change the boot priority machine

  Hello

  Everyone has noticed the ability to change the priority of implementation of VMS in Recovery Plans seems to have disappeared or I'm totally missing something.

  Tips or tricks

  Thank you

  Hello

  I don't have the chance to work with this version.

  You have the 'up' and 'down' buttons? Are they greyed out?

  Michael.

• How to change the boot sequence?

  How can I change the sequenze boot, if it is not possible to open the boot with 'F12 menu '?

  I m wondering why you can't access the start menu?
  What laptop and how Windows system you have?

  Usually, you can change the startup mode in the BIOS settings. To access the BIOS you have to press the F2 key
  But you can also press a particular button while you turn on/off the device to boot from a single module.

  For example:
  C button-> CD/DVD drive
  Key U-> USB FDD
  N key-> internal LAN

  More details here:
  http://support.Toshiba.com/support/viewContentDetail?soID=403623