Satellite program-112 P775 - password issue

Hello everyone

I became this afternoon to the proud owner of a Satellite P775 program-112.
However after going through the windows set up in the first turn on and everything happens as well everything has an abrupt end by failing to recognize my password at windows startup.
I thought that I must have NumLock or Num lock on when setting up my password.

After trying all the configurations of my password what he always used recognize.
There have been a few hopeful times when he went to a welcome screen had a think about it then decided that it was the wrong password.

Unable to create a reset disk of password that I'm stuck with the only option of buying a drive to Toshiba for £30 that after spending all that hard earned money on the laptop is not something that I look forward.

If all goes well there's someone out there with a solution to this or someone with an exact model laptop that could make me a reset of password or similar disk.

Any help will be VERY welcome

Concerning
Alan

> Toshiba for £30 which, after spending all that hard earned cash on the laptop is not something I look forward.

If HARD drive recovery is not too bad, then you can recover the laptop without the use of the recovery diskette.
Here's a great description how to recover the laptop with the HDD recovery procedure.

+ How to recover a Toshiba notebook with the HDD recovery procedure.
http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

Tags: Toshiba

Similar Questions

  • Satellite program-112 P775 - HDMI connection - no indicator signal on TV

    Hello

    I have a program-112 P775. After working for a while now, when I connect the HDMI cable to my TV SMART there is not an indicator of signal on the TV.

    I tried another laptop which works fine so I am confident, that he is not the lead or the TV.
    Any suggestions please?

    > It just seems odd that I've never had to use the FN key combination to send the video signal to the TV before.

    The FN + F5 combination switches between the internal and external screen.
    In the case where the video signal has not been set to an external source, now don't would detect not the laptop.
    This is also mentioned in user manual recommends checking page 54 :)

  • Satellite program-112 P775: HDMI connection to the TV does not work

    Hello

    For some reason that the HDMI connection between my Toshiba Satellite P775 program-112 to LG TV no longer although he did for some time.

    I tried another laptop without problem.

    I posted the same question some time ago and told to press the Fn and F5 keys, but it did not work.

    Any suggestions please?

    You are right: the FN + F5 switches between the internal and external video output.

    What exactly happens when you press FN + F5? A map falsh menu appears on the screen when you use this key combination?

    On the page of the Toshiba UE driver you can find the Manager command HDMI. This driver is required for your HDMI controller.
    In the case where the output to HDMI does not work, try reinstalling the driver

  • Windows 8 doesn't recognize DVD drive on Satellite P775 program-112 - code 19

    I have a Satellite P775 program-112 that was previously under Windows 7.
    This weekend I have upgraded to Windows 8 Pro RTM.

    Following the upgrade, the DVD drive is no longer recognized.

    In Device Manager the drive "POLE * one BD - MLT UJ240EF" is a warning symbol, and the status of the device in the properties is "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».

    I tried everything I found on the web without success:
    -Reinstall the driver (http://technet.microsoft.com/en-US/library/cc772156)
    -Find and remove UpperFilters / LowerFilters values in the registry (http://support.microsoft.com/kb/314060): in my case, they were not present

    I also tried to plug a player of DVD USB of my laptop - it failed with the same status of the device in Device Manager. This suggests the problem is not specific to my hardware DVD.

    Any suggestions welcome!

    Thank you

    Don't have no real experience with Win 8 but from my point of view, it's a Windows system problem that also appears on an another old Windows systems.

    The ODD driver is part of the Windows system (any Windows) so you would not be able to download and install a separate driver.
    I had a similar problem with my old Win Vista laptop.
    Could solve this problem by removing the CD/DVD drive in Device Manager
    I restarted the laptop and the system could install the STRANGE once again without any yellow exclamation point

  • Is the second possible drive in Satellite P775 program-112?

    Can you please tell me if yo can insert a second disc of DART to the Tosiba Satellite P775 program-112?

    Concerning

    Hello

    I think that the 2nd HARD drive is not possible, but check if the second HARD drive bay contains the HARD drive connector if the connectors are not available, then the motherboard doesn't support 2nd HARD drive.

  • Satellite L100 112 of the bios language and core issue.

    Hi people!

    I have a satellite l100-112. (brief model number: psla3e)
    I updated my bios to the latest version, that I found on the toshiba site. v: 3.20
    Its specification states that its language is: "universal" :)
    Well, actually it is japanease. So now I have a working bios, but I'm not convinced :)
    Unfortunately, I did not save the backup image of the bios. Can you tell me where to find an English bios or an older bios?

    The other thing is:
    I use debian etch os. I wanted to compile a new kernel, but I need a more detailed specification of equipment or a configuration of kernel source to do, because I don't know the exact of the ide controller type.

    If someone can help me, please do! :)

    I thank you,
    Eddy

    Hello

    First as you probably don t know, Toshiba doesn't support the other operating systems like Microsoft Windows. This means that, also, the BIOS has been configured only for the use of Windows and not Linux.
    Secondly, as far as I know Toshiba public doesn't any BIOS details (source of the kernel configuration, etc.).

    > don t know the exact type of the IDE controller.
    The L100 doesn't support IDE controller but a SATA controller ;)

    See you soon

  • Re: Satellite U400-112 - BIOS update error

    Hello

    I have a Satellite U400-112 with Windows 7-64 bit OS. I can't upgrade my system v4.00 to v4.70 since windows or DOS.

    Specifically, when the upgrade starts according to the file and then check it stucks without any progress. This error means the two versions (DOS & Windows).
    I have a strong feeling that is a corrupted bios file. If someone can justify my feeling or a good file BIOS it is asked to answer.

    Thank you in advance,

    Ioannis

    Hey Buddy,

    Update the BIOS of BACK is not possible because the updates are only based on the Windows.
    In any case, what update BIOS error that you get exactly?

    If you try to update, make sure that the value added package is installed. That s necessary for the program to update the BIOS.

    But why do you want to update? Normally it of not necessary if your system works ok.

  • How to reformat Satellite A50 112?

    Hello
    Can someone tell me how to reformat a Toshiba Satellite A50 112
    Thank you
    Gazza

    Hi Gazza,

    To reformat your laptop, you must insert the recovery CD into your optical drive and restart the laptop computer while pressing the C"" key. This will cause your laptop boot from the recovery CD which will then launch the process of re - install.

    Note that this process will be completely reformat your laptop and go back to its original state with the loss complete of the any of your own data and programs not original. Please make sure that you have a backup of your data before doing this.

    Kind regards

  • Satellite A50 112: registration problems

    I have a type of satellite SA50-112. When I chose to save my laptop with toshiba this type does not appear in the list. Any ideas?

    Hello

    After a few problems with the registration, I got some info from a Service partner.

    There are toshiba serveral registration Web pages. You have to find of the Toshiba site specific to the country, where your laptop has been purchased. On this site you may register your laptop.

    Another tip: If you take a look at the warranty booklet (it has been delivered by your laptop) there is a full explanation on registration!

    It should help you!

    Bye Bob

  • Can satellite U400-112 - I switch to Windows 8

    Can I upgrade my Satellite U400-112 Win8?
    I have 4 GB of RAM and today I am running win7 Ultimate 64-bit

    Thank you

    Hello

    Visit http://eu.computers.toshiba-europe.com/innovation/generic/windows8-message and that compatibility of Toshiba with the list of all matrix them currently supported models of laptops.

  • Good driver WLAN for Satellite M40X-112?

    Hello world

    I am the owner of a
    Satellite M40X-112
    and all in having moved my recovery CD I want to install XP anyway.

    Last thing I need is a network controller driver - probably the WLAN driver.

    If I want to download it, there are 4 options:

    + Intel® PRO/Wireless 2100 +.

    + Intel® PRO/Wireless 2200 / 2915 +.

    + Intel® PRO/Wireless 3945 / 4965 +.

    + Atheros Wireless LAN adapter +.

    How will I know which is the right pair?

    Thank you very much

    spinnne

    Don t you must discover. I've already done for you. :)

    Install the driver for "Intel® PRO/Wireless 2200/2915.

    It is the right one.

    Nice weekend.

  • Satellite U400 - 112 (PSU40E) - Safe BIOS upgrade - SOLUTION

    Dear all,

    Trying since long upgrade for the bios of my laptop favorite... Toshiba Satellite U400-112 (PSU40E)
    I have Windows 7 Ultimate (64-bit) English and BIOS version 4.00(until yesterday).
    The problem was that, in windows 7 (32 & 64 bit), the tool flash never started the process of update due to several incompatibilities.
    There is a solution (in fact a workaround solution) to be honest and works 100%!

    My solution is:

    (A) download the latest bios upgrade version appropriate for your laptop, save it (tomake it is easier in the root of the C:\ drive) and unpack it in a temporary folder (for example: bios).

    (B) use the Hiren's Boot CD a real support from a USB or CD (download and burn a CD or follow the process of CD copy on a USB key).

    (C) boot the laptop from the CD or USB flash and in Hiren's Boot Menu, select the version of mini Windows XP.

    (D) allow completely Windows XP startup and then run the tool to update the bios flash from the temporary folder. The update procedure make it exactly as it is described in the manual of the bios update. (If you are not experienced)

    (E) it will update the bios, and then he stops himself. Then you can start normally your operating system, remove any CD or USB key mounted on it.

    I hope you find it helpful and convenient.

    Best regards

    Ioannis

    To be honest I updated the BIOS on my U400 (running Win 7 32 bit), A210 (Vista) and Tecra A10 (Win 7 64 bit) using the victory as the BIOS version and never had any problems in running the tool
    Anyway thanks for sharing your knowledge with the community

  • Satellite U200-112: switching between monitors

    Satellite U200-112.

    To the passage of the mobile display on the external monitor, the resolution is exposed to the display, instead of the external display. Who faced such a problem?

    My English is not so perfect, but I think that in your case the option called extend my Windows desktop on this monitor is enabled. Am I wrong?

    In any case, if the external monitor is connected properly please use FN + F5 key combination to switch between laptop display LCD and external monitor.

  • Cannot start Satellite U300-112

    I have a Toshiba Satellite U300-112, which I can t start more... the last time I used it was 2 days ago and everything worked fine.
    I didn t and hard - or software changes and it shut down properly as usual.
    When I started the laptop today, it gave me an error message telling me to use the start-up aid that did not help either... He just said windows can repair this computer automatically.

    Diagnostic details didn t detects an error, and when I do a hollow of the options advanced system restore it doesn t work either...
    Can someone tell me how to solve this problem?
    I use windows Vista btw!

    Hello

    I assume that you are not able to start using the F8 key.
    Usually a start menu should appear who would be you can repair the laptop or to run a HARD drive recovery procedure (only if HARD drive recovery is supported on this laptop).

    If your mobile phone does not support recovery of HARD drive, then you will need a Toshiba drive.

    In this case, you will need to take the Toshiba Vista recovery disk and need to retrieve the laptop everything again.

  • Satellite U400-112 - WoW problems and the image is not good

    Hello!

    My laptop is Satellite U400-112 and matching video Intel X 3100.

    When I play in openGL, 3D graphics on minimum and the image quality are not good. The same situation with Direct3D even worse. I have a guess - the game not installed, I copied the folder with the game on another computer, maybe I need to reinstall? I installed the latest drivers for the video of the official website of Intel.

    Maybe someone have the same problem and can help me to solve it.

    Hello

    This only happens on the world of Warcraft or in other games too?

    I'm a bit confused because you have set the minimum graphics and then you wrote that the photo isn't good in my opinion that's normal as the photo isn't good, if you play on minimum graphics settings.
    Maybe you can post a screenshot screen or something else.

    You also need to update DirectX version on your laptop that you can find on the Microsoft Web site.

Maybe you are looking for