Satellite R630-14 days - which language the OS comes with

Similar Questions

• Satellite R630-14 days-how do I remove the keyboard?

  Hello

  I bought a Toshiba Satellite R630-14 days, and I would remove keyboard to clean.
  I tried to remove the plastic between the keys case, but I could not.

  Any ideas would be appreciated.

  > I would like to remove from the keyboard to clean.
  In my opinion it of not necessary to remove the keyboard to clean it up.

  First of all it of possible to remove the single key top. In which case you would not be able to remove dirt, you can first remove the CAP. But be careful...

  In your case, I would use a piece of cotton and a few drops of alcohol to clean the keyboard

• Satellite R630-14 days - adapter are a constant high noise

  I don't know if it's may be normal, but I think that my charger did not have this noise a few months ago.
  I got my Satellite R630 14 days in November 2010.

  Since a few weeks my charger will beep (a very high constant noise) when my laptop gets loaded or even when the charger is plugged in the computer.

  Everyone is the same a issue or whether it is a case for Toshiba support?

  Thanks for the reply
  Nicolas

  Hello

  The constant high noise could be caused by broken AC adapter cable.

  This noise is normal for power and appears especially if a cable or an AC adapter is defective.

  I think you should test a new adapter.

  Good luck

• Satellite R630-14 days - WLAN turn FN + F8 option does not appear

  I just got my Satellite R630-14 days with OS Win7 in German so I reinstalled the OS is in English (Win7 Ultimate).
  I installed all the drivers supplied by Toshiba (Chipset utility, value added package, WLAN Broadcom Wireless Driver, etc.), although when I press FN + F8 combination only keys to toggle the Bluetooh is available.

  Turn WLAN switch option is not displayed.
  Because of this, I can not disable the WIFI network.
  Why the WLAN switch option does not appear even after installing all the drivers?

  Hello

  What it means that all the FN keys work correctly, but only the Fn + F8 for WLan is not OK?

  Hmm I think it has something to do with the WLan driver. If the WLan driver has not been installed properly, then you will not be able to activate this using FN + F8.

  Check-> network adapters Device Manager and check if the wireless network adapter is listed correctly!

• When you view images as icons, which is the blue square with 2 "superior to" symbols.

  When you view images as icons, which is the blue square with 2 "superior to" symbols and how do I get rid of them?

  If you are running Norton 360 or McAfee backup online-
  MozyHome backup... the following links may be worth a visit:

  Green checkmark or icon collection blue arrows displayed files in Windows
  Explorer:
  http://www.Winhelponline.com/blog/green-tick-or-blue-arrows-icon-overlay-displayed-for-files-in-Windows-Explorer/

  If you do not need the backup indicators feature you can turn off by
  by clicking settings in the main window of Norton 360, disable the backup
  Status indicators check box and click Close.

  If you use MozyHome backup... Take a look at the following links:
  (McAfee backup online = MozyHome)

  Why the Green checkmarks or other symbols appear on my file and folder
  icons?
  http://docs.Mozy.com/docs/en-user-home-win/FAQ/concepts/commissue_green_checkmarks_c.html

  How to add or remove the MozyHome download status icons on my data
  files?
  http://docs.Mozy.com/docs/en-user-home-win/FAQ/tasks/commonissue_disable_greencheck_c.html#task_C34D204F371D411C861979F3DDD4FDE1

• Volume shadow copy Service information: could not start the Server COM with CLSID {790f2886-9889-4c99-8ef5-531add05d044} and name SW_PROV. [0 x 80110802]

  Problems with VSS and DTC... dunno how or serious errors are

  One of the two messages I get the message this is the right place to post

  Volume shadow copy Service information: could not start the Server COM with CLSID {790f2886-9889-4c99-8ef5-531add05d044} and name SW_PROV. [0 x 80110802]

  Operation:
  Get an interface that can be called by for this provider
  List of interfaces for all providers support this context

  Context:
  Provider ID: {262b716e-bb23-41b5-aaef-e2c15e767167}
  Class ID: {790f2886-9889-4c99-8ef5-531add05d044}
  Snapshot context: 0
  Snapshot context: 0

  Hey artinusa,.

  Welcome to the Microsoft Answers site.

  This error message is seen only in a Windows Server environment.

  The community more suited for this problem would be the Microsoft TechNet community. Please post your query it better support.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

  Have a great day.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The EarPods come with iPhone 7?

  The EarPods come with iPhone 7?

  Hello

  Yes - iPhone 7 comes with EarPods with a lightning connector.

  It also comes with a lightning to 3.5 mm Jack adapter, so that the EarPods can be plugged into a Socket 3.5 mm on another device, if you wish.

• Satellite R630-13U - driver need for the WLAN/BT function key

  Dear Sirs,

  I have problem with my Toshiba Satellite R630-13U

  I have not found any driver for the wireless hot key windows 7 pro 32-bit to be able to turn on/off the wireless or Bluetooth.

  Thank you

  Ayman

  You need to install additional package from Toshiba. Several different tools, this package, and one of them is utility of Flash cards.

  Please install, test and post comments.

• Satellite R630-13D: failed to create the recovery disk

  I have a similar problem. I have a Satellite R630-13 t and tries to use the Toshiba recovery Media creator to create restoration 2 DVD discs.

  When you try to create the first disc, I get the following message:

  Cannot read the next file.
  E:\Boot\fonts\chs_boot.ttf
  (Error code: 020150-20-00000000).

  I get a similar message when you try to create the second. I tried four times. On my last attempt, I disabled the protection in real time on my virus checker (Windows Security Essentials) - I don't know how to close down completely, not sure you can. I also turned off wireless and bluetooth.

  I need to create these discs please. I use anti-scratch Philips DVD + RW 4.7 GB 120 Min 1-4 x speed discs.

  I know that someone else mentioned to try a different type of disc but I just bought these for this purpose and don't really want to buy more if I can help it. The disc type is certainly not a problem? When I look at the disc in the drive, they have files on them - even the file that the error message above says that he could not read.

  Thank you
  Ian

  I had similar experiences in the past and I can say that, after several tests using different types of media, I was able to create recovery discs using DVD-R only media.

  Hey two disks empty buddy aren't really expensive so don't waste your time here awaiting a solution and buy two or three empty DVD-R discs and create recovery media.
  Another tip: do not buy some cheap stuf but high quality TDK or Verbatim discs.

• Satellite M40-237: how to connect the mobile phone with Bluetooth

  I have a new Noki 62333 and I have a Toshiba Satellite M40 - 237. I have a big problem with the connection between them. I put t know how to turn on bluetooth on my pc. Can you help me???

  Hello Iva

  A friend of mine has Satellite M40 and I know that this unit is shipped without BT module. If the unit has BT module, you will find labels of BT on the underside of your laptop.

  To establish a BT connection with his mobile phone that he uses the key USB BT.

  By the way: fact Iva comes from Zagreb, Croatia?

  Good bye

• Re: Satellite L300-10 q - cannot install the recovery disk with XP SP2

  Hello

  My laptop started giving problems (slow start & suspended inbetween) so I tried to re-installation with installation disk but recovery whaile there ask lang. & confirmation of removal of data and after the installation of minutes collapsed & turn in DOS (X :) for admin.

  When I restarted labtop it shows Bootmgr has failed.

  So I contact customer Service & they replaced the HARD drive with new, but still the same problem.

  I even tried to install XP SP2 after copying the files, it displays HARD drive not found.

  Pls help

  L300 - 10 q series

  Pls advice also how to check Windows XP is 32 or 64 bit?

  Thanks again

  Alvares

  If you try to install your laptop computer with the Microsoft installation disc, you need the SATA drivers. You can find it on the Toshiba site.
  You must load the drivers of an external floppy drive or you integrate into a new CD with nLite (www.nliteos.com).

  For the recovery disc you n t need these drivers because they are already on the disk.
  If you get the same problem with the recovery disk, you should check your disk with Drive Fitness Test (Google is your friend).

• * Need help quickly please * fact the SL400 comes with europian or AC adapter / American CC?

  Im going to buy a Lenovo SL400 laptop I customized...

  I live in Israel, so for a problem, the AC adapter is eauropian or American?

  If not, how can I ask American replance europian AC adapter for Lenovo?

  I would appreciate any kind of help

  Have a nice week than ya'll, Gil

  Welcome to the forum!

  All laptops Lenovo come with automatic universal power adapter detects the voltage. You just need a plug appropriate (detachable) for outputs used in your country.

  I hope this helps.

• Cinema 4 d Lite - which was supposed to come with AE CC - where can I download it?

  I was under the impression that Cinema 4 d Lite was supposed to come with AfterEffects CC - it is the case, and if so, where can I find download to install it?

  Thank you.

  It is already installed. Call you it by creating a new C4D file under Layer--> New... or by importing an existing of the C4D file. If this does not work, something is bad, but without some decent info on your system and the exact versions that nobody can tell you anything.

  Mylenium

• Re: Satellite R630-13F: taken Possible supported the resolution of the external LCD screen

  Hello

  I intend to buy a LCD for my editing work.
  My laptop is R630-13F.

  I was wondering if I get the LCD high resolution (2560 x 1440), my phone would support such screen? Thank you very much.

  Tim

  Hello

  The external screen resolution depends on the graphics card and the external monitor.
  As far as I know the Intel graphics chip that is used in this laptop is capable of managing the max 2048 x 1536 at 32-bit resolution

  2560 x 1440 appears to be too high

• Satellite R630 - 130 missing Webcam from the device after Win7 Update Manager

  Computer laptop only 6 days in use. After that Windows 7 update integrated webcam just disappeared from the Device Manager and, as a result that does not work.

  System just can not find. New drivers did not help, as well the default BIOS setting. I even restored the system 6 days back - nothing like Web camera in the Device Manager.

  This problem is common on the Internet - but there is not a lot of information on Google.

  Any ideas?

  Hello

  I really wonder why the OS cannot recognize the webcam?  :|
  Generally, if the driver or the software is not installed, you should see an unknown device, but as I understand your message, even this unknown device is not visible.

  What to say try upgrading the BIOS, I read somewhere in the forum that the BIOS update can be useful in such a situation.
  If this is not enough, try the new OS installation (recovery of the laptop) and check if the webcam seems once again