Satellite R830-1GZ - CPU usage high (> 25%) and increase in the speed of the fan after reactivation

Similar Questions

• Satellite A300-1IE - CPU usage high with Bluetooth active

  Hello!

  I recently installed Windows 7 and the Toshiba Software Installer on my Satellite A300-1IE.

  I have a problem with the bluetoothmanager, it's more than double the CPU usage when turned on. When I close the CPU usage goes down.
  This is not normal?

  When the BT active CPU usage is 9 to 15% and when not 1-3%

  Seems to be high. Try an update of the Bluetooth stack.
  http://APS2.toshiba-tro.de/Bluetooth/?page=download
  Ensure that you answer the question during the uninstallation, if all configurations should be removed, with Yes.

• CPU problem. The CPU usage is erratic and the RAM is regularly high

  CPU question

  I can't navigate with my huge memory and laptop good performance because the CPU usage is erratic and the Ram memory is regularly high. For now, 1.7Gigs is my memory on my 3 GB of ram. How can I solve this problem? My computer problems are related to the navigation.

  Hi Sean,.

  ·         Since when are you facing this problem?

  Method 1: Start your computer in safe mode to check the issue. Report of the results.

  Method 2: Run the next Fixit tool to check the issue.

  Difficulty of Windows system performance slow computer problems

  Method 3: Check to see if this article helps you.

  Optimize Windows Vista for better performance

• "The CPU usage high" during navigation

  What"the CPU usage high" and why is it when just browsing - is harmful and how to reduce it down? Thank you

  Follow the steps mentioned in the articles below provide

  http://www.ehow.com/about_5552689_cpu-usage-high-Vista.html

  http://www.ehow.com/how_5066314_stop-100-percent-CPU-usage.html

• In the "CPU usage history" Task Manager, which is the length of the story

  Work Manager "CPU usage history" view which is the length of the story?

  Stephanie

  There is no time for the CPU usage history

  How reach you that conclusion?

  You can change the timespan by changing the speed! You have high, Normal and slow. The displayed time interval will vary depending on the setting. You also Pause setting, which freezes the display.

• What is happening in the original file of the photo when I import it in Photos and I have the "Delete after import" box checked?

  What is happening in the original file of the photo when I import it in Photos and I have the "Delete after import" box checked?

  When organizing photos for Photos for Mac app, I find that the Photos makes "copies" of files within the library of Photos and must reference a file if your settings are such that you do not copy the original files in the Photos app.

  Trying to manage the disk space for the Macbook Pro.

  The delete after import is available only when you import a device - a camera, card, an iPhone, but not when you import files from a folder on the system drive.

  You can delete the local image files of your system drive yourself, once you have imported the Photos and they were copied in the photo library.

  I would never use the option "delete after Import. The files will be deleted until you can check if the files have been imported correctly. If you find out later, that some of the imported files are corupted and illegible, it will be repeated o toolate import, because the files have been deleted from the device. Or worse, if pictures should plant a reason any during the import, all the pictures will be lost, if you have enabled "delete after import.

• Re: Satellite P750-CPU usage higher than idle after installing display driver

  I have a default Satellite P750-136. Usually when my laptop is on idle I used to have 0-4% CPU speed.
  I just installed the latest drivers for the graphics card from nvidia 540 m and my CPU is 6-13% on idle.
  I checked the pc health monitor and the fan speed went up to 80% on idle. And the CPU temperature is closer to 50. What do you think is the problem and how can I get this back to its previous performance?

  There is no system restore point earlier. Install the nvidia driver does not seem to create a...

  You have installed driver from the Toshiba download page or you use NVIDIA driver downloaded from NVIDIA support page?

• Excessively the CPU usage high on my Equium M70

  Hello

  Recently in the last month my summer CPU usage hit 100% when I m not running any software tax (only internet explore and windows media player).

  It is slowing down the load time and the area near the fan is hot enough.

  I have a Satellite M70-337, with a 1.7 centrino processor and now 2 GB of RAM (formerly 512 megabytes). I upgraded the ram in December and had no problems like that, now it just started happening recently, I have installed everything that would, there is no unnecessary programs running and it was after I restored my computer to factory with the startup disk settings (a month later), he seems to have come from nowhere. On the list of the Task Manager it shows my web browser and Media Player by using most of the CPU, but I could have sworn that they use so far before.

  I don't know if the RAM would have been a factor, but it was the correct RAM for it and windows recognized to 2 GB.

  Why would it suddenly happened any ideas guys?

  Hello

  I have the same model of laptop and at the moment I have no such problems. To be honest, I did new installation OS 3 months ago and after installing Microsoft Update, I noticed this laptop does not work as before. Just for example: if I use IE7 extensively with several different tabs in the Task Manager I can see this need for IE more than 300,000 k of memory and crashes somehow. After the closure of the IE and ending THE process sin Task Manager I can work normally again.

  I don't really know how your operating system is configured, but in the Task Manager, you should see what running process is responsible for the high CPU usage. Maybe some antivir application? Sorry, but it is really not easy to sayt why this happens. Play around with the current process.

• Satellite R830-1GZ: ConfigFree Radar fails to display the networks without wire with the same SSID

  I have a new R830-1GZ Satellite with Windows 7 and a (much) older Portege M300 - all have two versions of Radar on them.

  However, while the old machine display correctly anywhere wireless and signal forces - even when there are multiple places with the same SSID - I use Powerline Extenders to extend coverage, the new machine with the last RADAR doesn't seem to be able to cope with these multiple identical wireless spots and fails to show more than one at a time - and then reliably.

  I should add that both machines work quite well in fact using the same SSID points connecting to the stronger.

  Is there a utility round way this or another that correctly displays it available different SSID and strength.

  Thank you very much

  Bill

  > Is there a utility round way this or another that correctly displays it available different SSID and strength?

  As far as I know there is no other Toshiba utility that could manage wireless networks and display devices Bluetooth as ConfigFree don't.

  I found some useful Q / A ConfigFree regarding:
  [ConfigFree: answers Questions &: http://www.toshiba.eu/innovation/solution_content_article.jsp?z=42&SOLUTION_ID=Conf igFree_QandA]

  Look also in Toshiba's technical knowledge base and search for Configfree for useful documents.
  http://www.Toshiba.EU/innovation/generic/TKB_SUPPORT/

• The CPU usage reaches 100% and the system locks requiring a hard restart on Windows Vista

  All of sudden the CPU usage reaches 100%, which makes the system dead slow and finally the system stops responding. I have to do a hard reboot to continue using the system.

  I tried to open the Task Manager to see if there are programs or services running that can consume resources and found nothing. The remains of number of CPU use, the graph to use but less than 10 years is hovering at 100%.

  I did not change my system.

  The problem appears on the two accounts that I installed on my operating system.

  I removed all the unwanted programs since the system was started.

  I have McAfee Antivirus installed for more than a year now, and the latest antivirus patches have been installed.

  Help, please.

  Thank you in advance!

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• The CPU usage high mad after DL anti virus

  Hi, I hope someone can help me! I have an XP machine running Microsoft Security Essentials for a long time without any problem. Recently, my PC slowed to a crawl, so I ran the utility system to clean programs, disk clean up/Defrag, etc. I then noticed by Control Alt Delete I had a program that took a ton of memory. I googled the program and (sorry don't have the name because I am now in a different pc). But Google search resulted in the guilty being Security Essentials. I removed SE and downloaded Nod32 and had the same problem, although this time the culprit was nod32. I am under SP3 and am very * on updates, etc. I have that turns off the PC until I know what is the cause. It seems that no matter what AV program installed my machine is very slow. Any ideas or suggestions? Thank you!

  The specs of this machine are?

  • Processor (manufacturer, number of cores, speed)?
  • Amount of (RAM RAM)?
  • Manufacturer of the video card (* is shared with system memory)?
  • Size of the hard disk (free space total and current)
  • Windows XP is at least patched with Service Pack 3?

  Download (FREE) MalwareBytes and SuperAntiSpyware (FREE) on another computer and carry them / set them on the first computer and perform complete system analysis - remove anything they find.

  Perform a full scan of the system with eSet NOD32 antivirus - it may take some time.

  Defragment the hard drive.

  CHKDSK of the hard drive.

  Use AutoRuns to determine that everything is put into service with the system or when you connect and then reduce how much starts until you need by changing the configuration of applications you need not necessarily to start up every time.

  Have you ever visited the system manufacturer (or its components manufacturer (s)) to check if they have newer drivers for the hardware on your system for Windows XP?  Motherboard chipset, video, peripheral device audio, network device and the likes?

  If you're low on space (or simply to clean):

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.

• Satellite 2410-303: Question about software update and service in the northern part of Cyprus

  First of all, I have a Satellite 2410-303 and I hoped that I can update my toshiba but there is no my toshiba model name in the Download Center. It has 2410-303 in the Download Center and I install the update on my toshiba. This will damage my toshiba?

  Secondly, I recorded my toshiba. I can access my account, then I'll download center update but my toshiba model is not correct (Magnia 550 d isn't my toshiba). I do not have other updates. How can I solve this problem?

  Finally, studying at University of the Eastern Mediterranean in Northern Cyprus. I am waiting for this area, but I could not find any point of service. Is there any point of service in the northern part of Cyprus?

  Thank you very much for interested in my topic and your comments!

  The simple driver update will not damage your laptop but the incorrect BIOS.
  Anyway, Sam is right. The S in the first step means satellite. This is why you must use drivers for 2410-303. These are the correct drivers and they should work on the laptop.

  If you are looking for the right service partner I would say visiting this site:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=true

  You will find a database with ASP together all over the world.

• Search for and change all the bug after his conversion to Authorware 7

  A few months ago, we went from Authorware 6.5 to Authorware 7

  I have problems with a 6.5 converted to Authorware 7.0 file. I tried to convert the file again after the first compact 6.5 file. I tried it again after the Authorware 7.02 update, but still the same problem.

  The bug affects "search".

  If I get " : " and replace everything by ": " 

  i.e. get cites two spaces OR and replace by quote single space OR

  There is no problem of search and replace in 6.5, but version 7 search text 16 characters to the right of the correct text, it is not change because it would produce a syntax error.

  Using 'Find in calculation' correctly identifies the first occurrence of

  quote two spaces OR

  Another example, if I get a variable named Mode, the first, several items are correctly identified, but ultimately it incorrectly highlights text.

  I tried in both XP & Vista, with similar results. Obviously, editing is a nightmare, because of global change, I now by clicking next several times, check that the correct text has been detected before the election change the code.

  I copied and pasted the calculation containing cites two spaces OR, a spreadsheet Excel and got the Ascii code all 9000 characters. The lowest recorded value is 32, half, I expect a non-display less than 32 character could be the cause of the error.

  Could find no mention of this error on the forum, I contacted Adobe. They kept me 15 days pending then lift the query at a higher level. For two months, they have ignored every week queries asking what was going on.

  This was their response, if any.

  Monday, November 30, 2009 1:34:07 AM PST
  Hello Tom,
  
  Thank you for providing your information.
  
  We wish to inform you that there is something on the text in the
  calculation, as saved from Authorware 6.5, which is not Authorware 7
  as. The only way I found to stop this is to cut and rebonding of
  calculation script in Authorware 7. You may need to check that
  the find command is highlighted before you apply the changes, and when he sees a
  problem like that, you have to copy / paste for this calculation. We
  were afraid of us can't see another way to stop this, and like Authorware's
  is not developed, there is no engineering team we can point to.
  
  For additional assistance, please contact us at the Support Web Portal:
  www.Adobe.com/support or you can use the following on support options
  the Adobe Web site:
  
  * The user-to-User Forums where you can enter your problem or
  desire to see if another user of Adobe can offer advice. Access to this
  resource address www.adobeforums.com.
  
  * The Support Knowledgebase, which contains solutions to problems
  that occur on the assumption of the operating systems (<>) and products of <>).
  
  Thank you Adobe chossing.
  
  Abhishek

  I have never been a fan of Adobe, even before they took from Macromedia and abandoned Authorware. Their terrible support strengthens my opinion of them

  I asked Adobe if it is possible to convert in 6.5 (but no answer).

  Any suggestions?

  Looks like you have found the solution that could make the search and replace works for good. "Diving code", I mentioned at the top of the queue showme is a calc that is attached to the card. Open one of the showme files and double-click the = at the top left of the map at the top of the page. You can only paste a calc icon in your file. I'm not sure that your solution works for every situation... for instance if you replace the SPACE BACK by RETURN, then he could not correct the problem, if there are lines with several spaces at the end... Here again - maybe using GetCalc and SetCalc will be Authorware re - compile the Calc and fix the problems of every search and replace.

  Mike

• Major Outlook and timing of the problems after the upgrade of the El Capitan

  On the advice of the Apple support (phone call) I recently upgraded from Yosemite to El Capitan 10.11.6.

  I have many problems. The two largest are (1) stands (2016) Outlook and frequently "must be closed; (2) calendars quickly goes to "not responding" after the launch and shows multiple entries for a single event. Example: I have a class to repeat each week (when I was in Yosemite). Before the upgrade, he showed the event once a week. After the upgrade, it it shows 13452 times the same day. I followed the advice on these topics, but nothing has worked. Similarly the calendars on my iPhone5 freezes as well.

  Hello Steve,.

  Thank you for using communities Support from Apple. I have a problem with your MacBook Air use after update is not what you expect. Based on what you said, it seems you can experience some software related issues, and here's how I recommend refine you and resolve these issues:

  1. first of all, try to run a quick with the disk utility tool test, as this can correct simple problems that you encounter. Then restart normally and retest your problems.

  Disk utility (El Capitan): a disc repair

  2. use Mode without fail to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory. Test mode safe questions, then restart normally and test again.

  Try safe mode if your Mac does not end commissioning
  Graphics performance limited in recovery of OS X or in safe mode

  3. you can find out if unexpected behavior is related to the user file or a parameter in trying to reproduce the problem to a different user account. This process includes creating a new user account, connect to it and test for the issue.

  How to test a question in another account on your Mac.

  See you soon!

• Import old box Inbox and sent in the Mail after upgrading to El Capitan

  There has been much discussion about the e-mails lost after upgrade to El Capitan, but I have not seen this particular question.

  I discovered that, like many others, all emails in my Inbox and in my sent folder to leave before the upgrade had disappeared. The issue has not affected the emails I had moved to folders.

  Open the mail library file (in the Finder, hold down the Option key selecting go to the top menu and the library appears), I discovered that Mail was created a new file V2, account, while the old one, V3 (created in 2013), sitting next to her. Go by the size files, it seems fair to assume that the V3 still contains my "lost" emails

  So, I don't know if the bug is that a new V2 should have been created at all, or is it a sync error, or something else. What I know is that when I try to import the items from Inbox and sent from the V3, I get an error message telling me that no mbox valid was found. This is patently false.

  I also tried to copy on an external hard drive, gave them a different name, but even then I couldn't import them. Reconstruction did not help either.

  Anyone able to help? I have a few crucial e-mails out there, and I try to avoid the upgrade...

  

  Address postal (El Capitan): import or export the mailboxes