Satellite S2410-504: need to screen for this device

Similar Questions

• Have a PC desktop, Compaq Presario 5WV270 without an operating system. I need XP Pro for this device.

  Running the software of HAM that requires WIN XP Pro SP3 32.  My understanding of several years that these units need their own flavor of Microsoft operating systems.  Where can I find a decent XP Pro?

  K1ger, welcome to the forum.

  Here is the product to the computer specification page:

  http://support.HP.com/us-en/document/c00009542

  The original operating system was Windows Millennium.  Windows XP requires a minimum of 1 GB of memory to operate properly.  The motherboard supports a maximum of 768 MB memory.  Therefore, I do not recommend installing XP.  A new computer may be your best option.

  If your problem is solved, please click "accept as a Solution.

• Need new screen for Satellite A85: laptop that has the same screen 15 ''?

  Looking for a new screen for this laptop and I was wondering what laptops use the same screen or the screen that fits?

  Fit the toshiba a30 screen? or should it be a 15 xga screen? There is a standard 30? will also be an adjustment of lcd a60? and if it would be an a60 housing also correspond to the screen? help please?

  required screen really, just need standard tft works ok?

  Hello

  Satellite A85 is unknown to me but to my knowledge the A30 has been delivered in different views:
  15.0 inch, screen SXGA 1400 × 1050 pixels.
  15.0 inch XGA, 1024 × 768 screen pixels

  I think that this view could be compatible with the A85, but maybe the display resolution is a little different.

• The laptop recovery Toshiba Satellite L505-S5997 problem error: Windows cannot verify the digital signature for the drivers required for this device

  I have a Toshiba Satellite L505-S5997 computer laptop and my hardrive recently crushed, impossible to restart.  I installed a SEAGATE 500 GB/sata/GO 16 MB of Cache, 7200 RPM hard drive. I ordered recovery for the computer disks and many of the drivers will not update or install without error that tells me that "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) "error.  Also, when I try to update Windows 7 I get the ' Windows Update cannot currently check for updates, because the service is not running. "  You may have to restart your computer. "When I try to download the service pack from the Web site it is usually interrupted with another error.  I tried to go to the Toshiba website and download the drivers needed and utitilities but nothing seems to work.  I am at a loss to try to seek and find a solution.

  Are you sure that the original problem was caused by a failure of the HD, did you test that the hd with the utility bootable disk from audit?

  As if you reinstalled to a new HD using that the required all defined recovery Tosh disk drivers would have been installed in this process.

  Assuming that Tosh then rebooted successfully after recovery, windows update would have run some important updates automatically. If that failed then it would seem that something is happening with your system.

• Black screen - try to activate the controller PCI of communication Simple: the drivers for this device are not installed. (Code 28)

  Original title: Safe Mode

  Can run my computer only in Safe Mode, whenever I try to boot into normal mode I get a screen with lines on the subject. Cannot download even the peak "white screen" now.

  Any help will be greatly appreciated. Thank you.

  New: I get his message when trying to activate the controller PCI of communication Simple:

  "Windows has enabled this device, however, this device still does not work correctly."

  Then:

  The drivers for this device are not installed. (Code 28)

  To reinstall the drivers for this device, click on reinstall.

  Then:

  "Windows cannot find the driver for your device".

  Get you the drivers accessing a site Web on your computer or the manufacturer of the graphics card > Search a drivers and download article > search your computer or your graphics card model number > your operating system > drivers for it: either video / graphic / Chipset (according to the label)

  See you soon.

• I have adobe certified m graphic deisgner... I can my own video tutorials to teach others about photoshop and download it into my own Web site? I m phhotographer also... should I I need legal permission for this gentleman...

  I have adobe certified m graphic deisgner... I can my own video tutorials to teach others about photoshop and download it into my own Web site?

  I m phhotographer also... should I I need legal permission for this gentleman...

  You probably want confirmation from an Adobe employee and I do not work for the company, but its completely legal to post images and videos done with and on Photoshop that you use a legal version of the software. Of course if you copy videos from someone else so they can possibly file a lawsuit against you for plagiarism or copyright violation, but I suspect that your not likely to do

  Terri

• Hi Mr President, last week I have a crash on my computer. Yesterday I installed PSE12... but I can't open the program, please I need help/support for this. Thanks a lot for helping me, Roland

  Hi Mr President, last week I have a crash on my computer. Yesterday I installed PSE12... but I can't open the program, please I need help/support for this.

  Wath can I do?

  In the box: PN 65224809, product key 1057 -.

  Please can you tell me wath is you solution?

  Thanks a lot for helping me

  Best regards, Roland Cuypers

  [email protected]

  Post edited by: Sandeep Singh removing serial number

  Hi rolandc65772962,

  Sorry for the inconvenience. Please provide us with the complete error message you get.

  Kind regards

  Sandeep

• Laptop HP 250 G2: the drivers for this device are not installed. F0Z43EA (code 28) - #ABT

  Hello

  I get this error:

  The drivers for this device are not installed. (Code 28)

  model: HP 250 G2 Notebook PC

  Model number: F0Z43EA #ABT

  PCI\VEN_10EC & DEV_5229 & SUBSYS_218F103C & REV_01
  PCI\VEN_10EC & DEV_5229 & SUBSYS_218F103C
  PCI\VEN_10EC & DEV_5229 & CC_FF0000
  PCI\VEN_10EC & DEV_5229 & CC_FF00

  How I solve the problem?

  thnx

  Hello:

  You need this driver for the card reader:

  Download and install the driver first on the list from the link below.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 15 & PFid = 25 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

• The drivers for this device are not installed. (Code 28) __This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  I HAV these two errors in my drivers and windows cannot update, can any body healp me?

  Hello

  What devices are - if you can not tell what is the name, then you can specify the category of
  Device Manager - or both?

  --------------------------------------------------------------------------------------------------------------------

  This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  The device doesn't seem to be present. The problem may be a faulty hardware or a new driver might be needed.

  Devices to stay in this State if they have been prepared for removal. After you remove the device, this error disappears.

  On theGeneral properties of the device tab, clicktroubleshoot to start the Troubleshooting Wizard.
  ---------------------------------------------------------------------------------------------------------------------
  The drivers for this device are not installed. (Code 28)

  To install the drivers for this device, clickset to update driver, which starts the Hardware Update Wizard.

  ==================================================================

  Those who might be ghosts then right click on them and UNINSTALL - devices and then RESTART.

  References to Vista also apply to Windows 7.
  
  If they show upward then try to manually install the drivers.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Found no media for this device

  My Toshiba satellite C655 model laptop couldnot find peripheral Audio High definition audio bus for the Windows Xp operating system. When tried to install the audio driver for Conexant high defintion an error pop up to install microsoft Universal Audio Architecture and couldnot find media for this device. I tried all ways but couldnot find any solution. Please help me...

  Hello

  This seems to be a known problem with this particular model and driver:

  See the link provided below, the Toshiba Forums to resolve the problem:

  http://forums.Toshiba.com/T5/sound-audio/Toshiba-C655-SP6001L-audio-driver-XP-7-32-bits/TD-p/131716

  For more support board you can also contact Toshiba Support

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

• Computer does not recognize network. -This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Hello!

  I have problems connecting to my network. I stay in a House (not my own) and I can't connect to the network in this House. When I choose the option 'connect to a network', nothing happens. I followed the instructions to display the "Device Manager" and watch the 'map', and he said:

  "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  When I click on this button, nothing happens... Should I simply wait for Microsoft to return to me - or is there something else I need to do?

  Thank you!

  Hello

  You must get the drivers latset for m computer support site.

  Delete the "false: entry in Device Manager and install the new drivers."

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Kindle Fire PC USB connectivity, the drivers for this device are not installed. (Code 28).

  I connect and transfer content from my computer to my Kindle all the time, but today when I plugged the Kindle my pc tells me that the device needed troubleshooting.  After you run the troubleshooter, I gives me this message:

  "The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information.

  To find a driver for this device, click Update driver. »

  This has never happened before, and, no, I have not recently downloaded new applications, programs, updates or had a system crash. It was, as usual, a few things. Where it says "to find a driver for this device, click Update driver" which is non-interactive. I can see it, but you can't click on it. That's happened? What should I do?

  Scott.

  Hello Scott,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur because the parameters or corrupt device drivers.

  I suggest you run this Microsoft fixit and check if it helps.
  Reference:
  Hardware devices do not work or are not detected in Windows
  https://support.Microsoft.com/en-us/mats/hardware_device_problems

  Automatically, he diagnoses and fixes problems with the hardware. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

  Please also try to update the device drivers by using the steps described in this article and check.
  Reference:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• OTA installation gives "not available for this device.

  Hello

  I'm developing an application, and people need to test the application before releasing the app in App World.

  So I downloaded the files jad and cod and let people install the application OTA.

  The problem is that someone with a Z10 BlackBerry running the 10.2.0.439 version can not install the application. She has the "Not available for this device" message and the browser actually open the jad, as if it were text.

  

  The application has been developed about 2 years targeting BB5.0 ago and I only have a 5.0 and 7.0, devices that work perfectly.

  What could be the problem?

  Not available for this device

  Java runs on the Z10, or indeed of any device BB10.  So if you want your application to work on the BB10 device, you are to re - write.

  I could give you more, but if search you around you will probably find more yourself, but come it please if you have any specific questions.

• Windows cannot verify the digital signature for the drivers required for this device

  I get this error from a specialized device that uses a usb/network card connection built-in.  It is with windows 7 Home premium.  Now I know that the source of the driver.  It is the latest driver and labeled for use with Vista.  I need to override this security check, so I can use this equipment.  It is an integral part with me a living. It is likely absolutrly nothing wrong with the driver.  I downloaded from many sites without modification.  This equipment worked well under Vista.

  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

  I found the answer by looking for other sites, it's probably here somewhere as well.  Restart the computer.  During restart, press "F8".  Select Disable Driver Signature Enforcement in the start menu.  This fixed the problem of driver in my case.

• A service of driver for this device has been disabled. Another driver can provide this functionality. Code 32 (hard drive problem)

  Hello

  I've just moved a CD into my disc drive and noticed that nothing was happening. I went so manually click on the disc itself, and seen that it was completely gone. When you go through the process of troubleshooting in Windows 7, this note came:

  A driver (service) for this device has been disabled.  Another driver can provide this functionality. (Code 32).

  Obviously, I need to re - activate this service, but I am helpless about who or how. Any help would be appreciated!

  Try the following MS KB article:

  http://support.Microsoft.com/kb/314060

  Try following the steps for Windows Vista, which should also work for Windows 7.