Satellite SM30-604: 4.25 SpeedFan and question about the right temperature?

Similar Questions

• Satellite A30 - question about the CPU temperature

  Hi all

  I have a Satellite A30 (model name: SA30-151, model number: PSA33E). I had the usual problems with overheating and closing, where I had to clean the radiator.

  My question is, how hot the CPU must sit at and what temperature is dangerous?

  I installed 'Hardware sensors Monitor' and the average temperature is about 55 c, but I saw it happen at 70 c when I'm pushing it.

  I was not able to find something on the net about it and I can't find information on the Toshiba site.

  Any help or advice would be appreciated, thanks...

  The same temperature is on my Tecra M1. Believe me, there's really no reason to panic.

• Satellite L40 - question about the CPU temperature

  Hello

  I have a Toshiba Satellite L40 17 Q with Intel Celeron M CPU.

  The usual device temperature is about 60 degrees Celsius. I read that the Tj to this type of processors is 100 degrees Celsius.

  So my question is dedicated to the owners of laptops equipped with Intel Celeron M processors and of course for the hardware gurus.
  Is the operative temperature of 60 degrees Celsius of normal, and if not how do I decrease.
  My laptop is new and I make sure that the air flow openings are not jammed.

  Thank you in advance!

  Hello

  Don't worry, the CPU temperature. 60 degrees Celsius is certainly within the normal range, and there is no reason to worry about this. On my laptop Tecra, I noticed the temperature CPU about 62 degrees Celsius and drive HARD around 40 degrees Celsius.

• Suggestions and Questions about the upgrade my Hardrive Mac and Ram.

  Hi This is my first time asking something in the forums. (At least I think) Well anyway, I got the Macbook Pro Mid 2012 13 "with the retina also runs the OS El captain. I do computer for school and sometimes animation video editing and ive noticed some performance as my projects get bigger and bigger issues. I want to improve my mac, but I'm not very tech savy and don't want to do something useless, so I had a few questions, I wanted to ask you.

  Do I need for my hard drive and my Ram?

  What effect will the upgrade of my Ram and what effect will be upgrading my hard drive with an SSD?

  I saw this SSD online and thought of novice opion that sounds get Id more bang for my buck (link) with her. Is this good? What more to kill? WiIll it still works? Could you suggest some other good affordable options?

  My next question if I decide to upgrade my Ram can provide you with some good affordable links to buy of new RAM sticks, is also 8 GB, the best he can do?

  My next question I watched a few videos online and by installing the updates level looks really easy and fast. But I use bootcamp (to play games sometimes), and I wanted to know if I save my files on my drive as ive seen people do videos, (something to wipe the drive and put it back in after installing updates) will be I lose my windows 7, I lost the disc to reinstall and he check so I really want to buy a new also do not want to lose the things I put in memory.

  From the retina MacBooks you is impossible to pass the ram as it is soldered to the logic board. As with the hard drive, it's just a card ssd and you can't get those anywhere because their hard to find.

• Satellite L850-046 - question about the CPU temperature

  Hi Experts,

  I bought the Toshiba laptop 9 months ago, but now notice the temperature warms. I check the software Toshiba Health Monitor and the CPU temperature range of 46 to 53%, fan speed 50%-63%.

  Is - this normal readings?

  I am now using a desk fan pointing in the vents hoping that additional traffic can maintain better temperatures.

  What would be the ideal and the overheating of the readings to look out for.

  Thank you very much

  Because cell phone use for 9 months, I recommend you to clean the cooling fans.
  The fact is that from time to time the dust and debris that may affect the performance of the cooling fans, and this could lead to a higher temperature.

  I clean my fans from time to time using a jet of compressed air.
  It helps to get rid of dust and to lower the temperature.

• Questions about the right way to create a logon page?

  What is the best approach to take for the implementation of a portlet to logon to a WLP 10.3.2 Portal? A portlet of connection must be created in it's own book, and then once a user is logged on, the Portal main book would be displayed?
  
  Or should I put a login portlet it's own page then once a user is logged on, hide this page and the main page of the portal?
  
  I'm looking for the best approach.
  
  Thank you

  Hello
  Once a user is authenticated in my portal, how to assign a role to the user?
  1. given that the user is already there in the security, you can add this user to the role of testers immediately. Say, you create the user weblogic1. Add this user to the role of tester. So when it connects, it is automatically part of this role.

  By example, if I create a Portal administration Console TESTER role and determine that the authenticated user must belong to the TESTER role, how would assign the role to the user dynamically?
  NOW, dynamically if you don't know which user connects and if you want to add to the role of TESTER, you should do this using the API. With the help of API, you can get the list of all the roles he belongs to and if it's not part of the role of tester, add sound ID user to the role. All APIs are here. You will have this logic just after the authentication code. As you will have in Login pageflow connect action that performs the authentication. Then the next set of lines will be to add this user to the role.

  I'm confident, you can do so by the API. Just look for the API in the docs online. I not remember exact set of classes, but they are there. Do some research. I will share if I can find these APIs.
  http://download.Oracle.com/docs/CD/E13155_01/WLP/docs103/Javadoc/index.html?overview-summary.html

  http://download.Oracle.com/docs/CD/E13155_01/WLP/docs103/Javadoc/com/BEA/p13n/security/management/authentication/AtnManagerProxy.html
  http://download.Oracle.com/docs/CD/E13155_01/WLP/docs103/Javadoc/com/BEA/p13n/security/management/authentication/AtnSecurityMgmtHelper.html

  Thank you
  Ravi Jegga

• Comments and questions about the mixture ADF Page flows with Trinidad UI

  Hi all
  
  I did a few tests to see how possible it is to use Trinity to the UI (for compatibility of this stinking IE 6) as well as the ADF Page flows / controller of the ADF. My question is whether there is a sustainable configuration from the point of view of Oracle. I did things to make it work and noted the following interesting behaviors (call anaomalies, if you wish):
  
  (1) addition of ADF Page Flow within the reach of the technology for a project automatically adds ADF Faces. If I try to eliminate ADF Faces of the scope of technology, it automatically deletes the flow of Page of ADF as well.
  
  (2) if I remove the ADF Faces DURATION 11 project library and create a page of trinidad (also set up the renderkit and as appropriate skin and remove a moment-false ServletADFFilter of web.xml) I get errors MDS when running the resulting page. I can't correct the error by removing the MDS libraries either - as soon as I put ADF Faces DURATION 11 library back, things are OK.
  
  (3) since I've faced ADF in my scope of technology, all newly created JSPX pages end up having af:document / af:form tags and have the namespaces implemented for ADF Faces. Not useful if I want only parts of Trinidad, but not a show-stopper, either.
  
  (4) an interesting thing that I have reported before... If I have the ADF Page library flow into my project and then configure navigation case in faces-config. XML (I know, wouldn't do that, just an observation, even if someone who has accidentally library ADF Page Flow in their project without any intention to use the ADF Page flows will find this very annoying to debug...), the first click of button that leads to the navigation works very well. All subsequent navigation requires two clicks on the link/button to trigger navigation. This behavior does not occur if you change the case of navigation to redirect = true.
  
  So, in summary, I seems to be the controller of flow/ADF Page ADF working with Trinidad, with a few minor problems of productivity due to an obvious requirement to have the Library Runtime of ADF Faces and the extent of technology ADF Faces included in my project. Now Oracle - is this going to be a sustainable configuration?
  
  I'd also appreciate comments, suggestions and comments from anyone else who has tried or is trying to use the ADF Page flows / ADF controller with a single user Trinity interface (well, in my case, I'm going to blur more using the tag af:template with components of the Trinity, but it's another whole story).
  
  Best,
  
  John
  
  bump #2

  + 1). Adding the ADF Page Flow within the reach of the technology for a project automatically adds ADF Faces. If I try to eliminate ADF Faces of the scope of technology, it automatically deletes the flow of Page of ADF as well. +

  ADF task flows have to ADF Faces e around. Not sure this is documented somewhere, but I hope it's

  (2) no idea about it

  + 3). Since that I've faced ADF in my scope of technology, all newly created JSPX pages end up having af:document / af:form tags and have the namespaces implemented for ADF Faces. Not useful if I want only parts of Trinidad, but not a show-stopper, either. +

  Looks like that is facing an emergency room to have an option in the dialog creation page if create an ADF or page of Trinidad. I'll take a note

  + 4). An interesting thing that I have reported before... If I have the ADF Page library flow into my project and then configure navigation case in faces-config. XML (I know, wouldn't do that, just an observation, even if someone who has accidentally library ADF Page Flow in their project without any intention to use the ADF Page flows will find this very annoying to debug...), the first click of button that leads to the navigation works very well. All subsequent navigation requires two clicks on the button/link to trigger navigation. This behavior does not occur if you change the case of navigation to redirect = true. +

  I'm not sure how to restrict we are on the "do not use" them in combination, but to me this looks like a bug.

  Frank

• Question about the right way to implement the network connectivity.

  Hey guys -.

  I've read a few articles and the configuration of many times on this practice guide, but I can't seem to understand what the way ' own/best practices' to build the network aspect of the VMware host to the switch.  This environment is my lab environment, FYI.

  Can someone please shed some light on this.  I followed it - http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1004127

  My scenario is:

  -2 hosts ESXi 4.1 running

  -Each host is the same hardware

  -Each host has 2 network cards

  -Both connected to a single 3560 (although the 2 are available)

  -Each host connect to a San (running OpenFiler) on iSCSI

  -VLAN 5 is involved

  -The two hosts in vCenter in an environment non-clustered (for now)

  • So, each host must connect to the switch as a trunk or an access port?
  • If the sheath is the method, which is done tagging?  During the switch, or the vSwitch on each host?
  • How do you know when to choose between safe or not safe?
  • Must each host have 1 vSwitch for VMs and a vSwitch separated for the iSCSI connection?
  • Should the 2 network cards be associated to in VMware to the switch?  Or should they should be a channel of the switch port?  Or none of these options.

  I'm still a newb to the VMware line, so I'm really just practice a lot lately.  Any help is greatly appreciated.

  3. Yes, but some companies, like to give this control of security to the network instead of the VM team team. I would say just trunk, but I'm sure that there are borderline cases.

  4. Yes, I would be to separate traffic by giving iSCSI it's own NETWORK ports and also separate iSCSI traffic to its own network to the physical switch instead of just VLAN.

  You are welcome. Good luck!

• A few questions about the Satellite A100 PSAANE

  Hi friends,

  I have a Toshiba Satellite A 100 - PSAANE with Vista Home Basic preinstalled in it.
  Now, I have a few questions... I mention below: -.

  (1) if I want to format my laptop, I need a CD to install for Vista Home basic... then I don't have this Toshiba CD when I bought the laptop. So how do? question: How can I format it?

  (2) can I change my Vista Home Basic to windows XP? I think it's much faster than this one. is it advisable?

  (3) I have a GB of RAM in the laptop. Increase the RAM? I think that my laptop has become to slow down. is it advisable?

  (4) and on my screen, everytime I try to change my profile screen to windows Classic view, my screen begins to blink. and after a while, the screen turns off. So I can't change that. I put the color scheme of windows vista only. What to do about that?

  Please help me friends. Thanks in advance.

  Kind regards
  Perkins

  Hello

  Here, a few questions about the number:

  (1) usually, you should get the Vista Toshiba Recovery DVD. If you didn t receive this DVD then you can order it here https://backupmedia.toshiba.eu/landing.aspx or you could install the disc of Microsoft Vista.

  (2) of course, you can do this. I think that Win XP drivers can be downloaded from the Toshiba driver page.

  (3) Yes, you can upgrade the RAM. For more information, see your manual or search on this forum for similar topics

  (4) maybe it s associated with the graphics driver. Check if you can update. I would recommend additional check if you are using the latest version of the BIOS

  Welcome them

• Re: Several questions about the recovery of the Satellite L750 features

  I have several questions about the recovery of Satellite L750 features available to it. Any help and answers would be useful.

  (1) when I started the laptop first, he asked me to create a recovery CD incase I need to reinstall the operating system. But he also said that he built in the recovery partition, so therefore, I have to make a recovery cd or not?

  (2) will be the recovery CD is exactly the same as the recovery on the system partition?

  (3) is the partion of CD or recovery includes all the integrated software pre-installed with the laptop?

  (4) also in the device manage management it shows watch partion recovery but it is empty, is it true?

  (5) in the second partition (drive D) system, he has a record with what looks like the recovery of files and folders. Is it safe to move/remove it?

  Hello

  I'll try to provide answers:
  1 - to ensure that everything works perfectly you don t need these discs, but if something goes wrong with the HARD drive you will not be able to do anything. When you have the recovery DVDs, you will still be able to install the recovery image and once again the factory settings. So my advice to you is: create these discs as soon as possible. Use only on DVD-R media and buy products of high quality (TDK or Verbatim).
  2 - Yes.
  3 - Yes.
  4 - No. Don t be confused with this.
  5. in a first time create restore DVD, and later you can do what you want. I put t know which files mean you but don t touch anything before that of the recovery disks to be created.

  In the past, many people have been experimenting with the structure of HARD drive and partitions and later was surprised when installing disk recovery HARD has been damaged. Don t make the same mistake.

  If you have any other questions you are welcome.

• A few questions about the difference between the Satellite P70, L70, S70

  Hello, I have a lot of questions about the P70, L70, S70 series that come with a 1920 x 1080 panel.

  (1) what are the differences between the L70 and S70 series? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  (2) P70, L70, S70 doesn't support a 2nd HARD drive or it's just the P70 series that support?

  (3) all the three (P70, L70, S70 series) come with the same TFT panels?

  (4) of the above series, which supports mSata?

  (5) all the model of each series are delivered with support from mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?

  (6) all the foregoing, are delivered with a S - ATA II or III S - ATA interface?

  (7) who is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.

  Thank you in advance.

  > (1) what are the differences between the series L70 and S70? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  What models Sat L70 and S70 do you mean exactly? There are different L70-xxx-xxx and S70 models on the market that supports different hardware specifications.

  (> S70 2) P70, L70, support a 2nd drive HARD or is - it just the series P70 that support?
  As you can see in this [Sam P70 HDD replacement document, | http://aps2.toshiba-tro.de/kb0/CRU3903II0000R01.htm] the P70 series supports the 2nd drive Bay HARD, BUT even if there is a 2nd HARD drive Bay, this does not mean that you can use the 2nd HARD drive. In the case where the 2nd HARD drive Bay are equipped with HARD drive connector, you can use the 2nd HARD drive

  I also found the [Sam L70/S70 HDD replacement | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm] the document on the Toshiba page and there I see this 2nd HARD drive Bay is not available

  (> 3) all three (P70, L70, S70 series) come with the same TFT panels?
  See point 1). Different P70, L70, S70 models were equipped with different material parts.

  (> 4) of the series above, which takes in charge mSata?
  As far as I know that some P70 models are equipped with an mSATA SSD of 256 GB.

  (> 5) do all the model of each series are delivered with support mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?
  See point 4) not all models supports the same hardware specifications

  (> 6) all of the above, come with a S - ATA II or III S - ATA interface?
  I don t think that SATA III is supported. I guess it would be SATA II

  (> 7) which is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.
  Not easy to answer because there are too many models released in Europea.
  And not all models are available in each country. So I guess you will have to look for the models that have been released in your country.

• A few questions about the upgrade on Satellite A300-144

  Sorry for the typos, English is not my mother tongue.
  I want to ask some questions about the upgrade of a300-144.

  * Some info first.*

  CPU: T2370 ([http://ark.intel.com/products/34445/Intel-Pentium-Processor-T2370-1M-Cache-1_73-GHz-533-MHz-FSB]).
  Chipset: GM965 ([http://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller]).

  * Questions.*

  1. my frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  2 Intel said that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?

  3 I know, taken of my CPU is μFCPGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 ([http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB]) is a compatible processor or there are some limitations in the BIOS?

  > 1. My frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  The speed of the memory is related on the material. This means that the FSB is responsible for the limitation.
  If the FSB would allow support 667 MHz then the memory would also at this speed.

  > 2. Intel says that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?
  The memory depends on the chipset. So if the chipset supports 4 GB of RAM, you should be capable of this move to 4 GB of RAM

  > 3. I know, my CPU is? FC-PGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 (http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB) will be a compatible processor or there are some limitations in the BIOS?

  It might be possible that the new processor would be fully supported by the BIOS, but in most cases it should not be a problem if the chipset would support the new processor.
  But as far as I know the upgrade of the CPU is not supported by Toshiba or any other manufacturers of portable and its your own risk to run laptop with the new processor.

• I have a question about the time machine. I recently updated my Quicken 2015 and there was something wrong with the update. Can I go back in just the Quicken file and restore it until I downloaded the update do I have to restore the entire

  I have a question about the time machine. I recently updated my Quicken 2015 and there was something wrong with the update. Can I come back in all the Quicken file and restore from time Machine before I downloaded the update to do, I need to restore the entire computer?

  Yes, you can just restore this file or application. Use Time Machine to back up or restore your Mac - Apple Support

• A few questions about the use of data and Cliq

  I have the cliq, however I chose to not get 3G (so I bought full fare). So I have a few questions about the phone and the use of 3G / 2 G/Edge:

  1 - is possible to disable completely the 2G / 3 G/Edge? I know you can switch between them, but are anyway just tell the phone to stop using them altogether since I'm not subbed to the service?

  2. when the update takes place, I guess we'll have to reconnect motoblur and etc, but if I don't have 3 G will I have motoblur connection problems after the update? Or he keeps the latest wifi settings so that it would connect to wifi to connect. When I first got my phone it was not a problem b/c I had 3G for the first month.

  I hope that makes sense, thanks!

  To stop all the data, I would like to download an application called APNDroid. He cut them all down. When you log on to blur you have 3G or WIFI doe this without getting a timeout error. During the process of setting up your Blur account, you can press the menu button and set up your wifi to work, this will connect you to Blur and your phone will be connected to the blur. If I were you I would be rethinking to do a data plan since you are really losing out on most of your main features of phones. It's your choice, however.

• How can I change my HTTPS thing, so it isn't always pop up and ask questions about the sites Web secure when I play some games?

  Feel free to change the title

  How can I change my HTTPS thing, so it isn't always pop up and ask questions about the sites Web secure when I play some games?

  You're talking about Facebook?

  Try the gyration of the Secure Browsing

  http://www.Facebook.com/help?page=1079