Satellite sometimes does not detect the wireless network

Similar Questions

• Qosmio F10: Driver Installation does not detect the wireless network card

  I wonder if anyone can help before I phone supported again. My motherboard is dead and ASP replaced and recovered my laptop qosmio F10. Since having back, my wireless card did not work.

  Windows detects a "network controller" whenever it starts and gives me the opportunity to install it. I tried to install it by navigating in the 'tools and utilities' records CD rom for folders and subfolders of "Wireless network driver" and it still does not detect the card.

  I also tried to install using the cd rom web gui and selected the 'Pilot wireless network' link and then tried to install it. It opens a dos command prompt and try to install but comes up with the error "failed installation.

  I ran the customer service and they told me to run the qosmio recovery/then recovery of product/recovery of qosmio and again...

  I still don't the card wireless not yet installed. This happened to someone else?

  I tried already shot the drivers from the web, but with no luck... If a representative of customer service with the help of good technical knowledge that would be great, or if someone has encountered the problem too and he had fixed to the give me some advice...

  Thank you very much

  Sean

  Hello

  you see the card wireless as an unknown device in Device Manager? If this is not the case, perhaps that the card was not properly installed after replacing the motherboard.

  Sorry I have no other idea.

  Good bye

• HP configuration wizard does not detect my wireless network.

  Hello

  I have a HP Photosmart C4580 multifunction device for a few years, works as a printer/scanner wireless for the household. In the House, we have an iMac, a Macbook Air and two computers HP laptop.

  Last weekend I bought a MacBook Pro in lieu of the iMac and a router Airport Extreme Base Station to replace my ISP provided. Since then, I can't have the printer hooked up again.

  All the wireless devices in the House for example iPad, iPhones etc connect the new router without problem so I'm glad that the wireless signal is OK.

  I downloaded the latest HP Setup application and it ran with the printer connected by USB to install on the MacBook. However, even if the USB device is detected when I try to configure it to the wireless, the installation software does not detect my wireless network.

  I tried the following: -.

  -Rebooted router

  -Reset default printer is turned off, unplug the unit and unplugged the cable, left for 30 seconds then reconnected again.

  -Created a new comments system.

  -The router is configured to run g and n network.

  -The network names have any unusual characters.

  -Tried to enter the name manually.

  USB printing is fine.

  Is there something about the installation wizard that can not locate networks?

  OK, on the front of the printer, go to wireless menu and restore the default settings.

  When you start the HP software to connect the wireless printer, make sure that the USB cable is NOT connected to the printer.  Only connect when the software tells you to do.

  Be careful with the comments network, if your computer or printer connect you will not be able to print.

• I have a toshiba laptop purchased recently. After the scheduled updates it does not recognize the wireless network. I have to do a system restore. is there a solution for this problem?

  I have a toshiba laptop purchased recently.  After the scheduled updates it does not recognize the wireless network. I have to do a system restore.  is there a solution for this problem?

  Hello

  Make sure you have the latest network adapter drivers fron toshiba

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  and if windows update is at the origin of the problem change how to get updates to uncover the problem update

  When you have found the issue, a right click on it then invited uac then hide

  read the information on the link below

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• Satellite Pro C660-1NQ does not detect the WLan network

  Hi guys,.

  We have a Toshiba Satellite Pro C660-1NQ here that does not at all, detect the wireless network
  I checked the Device Manager and the wireless card does not show here.

  I tried scanning for new hardware, but nothing was found. I tried to turn the wireless off tension with the function and the keys F8 but not yet showing in Manager devices or any new hardware...

  Any ideas as to what I can try next?

  See you soon,.
  Ash

  Hello

  It seems that the laptop would support the Wlan Atheros 802.11agn card.
  Usually the Atheros Wlan card must appear in Device Manager as on the menu network cards.
  If it s not appear do not then I recommend that you install the WLAN driver which can be downloaded here:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  Choose the Atheros Wireless LAN Adapter Windows 7 (32/64) 9.2.0.419.0 or newer
  I hope this helps to detect the WiFi chip!

• Equium P200 does not recognize the wireless network with Win XP card

  Dear team

  I recently installed windows XP on my Equium P200 (he had originally vista).
  Now, I have a problem with the Atheros wireless card. The computer does not recognize the wireless card is installed. I tried uninstalling the drivers and reinstalling, but nothing works. In the hardware Manager, I get an error code 10 when you try to install the drivers. Can someone please help.

  Thank you

  Are you sure that you have an Atheros WLan card installed on this laptop computer at 100%?
  I recommend you to check the bottom of the unit. There are labels with information about the wireless network card! I think that there is a number. Then google for this number and you should get information on the wireless network card.

  Eventually he s one card Intel. | In this case, you should try to install the driver from Intel.

• Satellite L655 sometimes does not recognize the wireless card

  I have a L655. Most of the time it works perfectly fine. Sometimes when I turn on my computer, it does not recognize my wireless card. He considers that it is not at all.

  The icon in the status bar says that there is no cable ethernet plugged in and nothing on the wireless.
  Usually this icon is not present, and one for the wireless is (whether it is connected or not and if there are connections available or not). In the device manager there is nothing for the wireless card.

  Under network card it has only ethernet. Its as if it does not exist.
  Basically the way to solve this problem is by restarting simply my computer until he figures it.
  Sometimes, it can take 5 or more times.

  Any help please?

  Hello

  What satellite L655-xxx you have exactly?
  As far as I know there are different models with different wireless network cards.

  Your BIOS is up to date? Please check this box.

  So now to a few proposals of solution:
  First of all that I recommend to check if the update of the Wlan driver would improve the Wlan functionality.
  In addition, you must deactivate the energy saving feature for Wlan in Device Manager and Windows 7 power options as well.

• Satellite 5200 903 does not detect the wireless adapter

  Hello everyone,
  I wonder if anyone can switch me to it...
  Since I reinstalled the operating system (my XP pro SP2) PC seems not detecting don't nor the wireless adapter in the device under network adapter Manager.
  Also the light of the flexibility wireless no longer not.
  I also have problems to access the BIOS to check if the card is detected there, have not a Toshiba HW setup in Control Panel as described in the manual.
  Any suggestions?

  Hello Juliana

  The question is how did you install the operating system? If you use the restore CD to install all tools including Toshiba HW setup. If the unit is pre-installed with the Microsoft Windows XP Home edition CD, you must install all the stuff of Toshiba late.

  Just a little explanation about the wireless network card. Basically, if the wireless switch indicator turns not on s clearly indicate on hardware problem. I guess that the wireless card is faulty. Also check if the card is listed in the Device Manager.

  If you want to enter the BIOS settings pres ESC key at the boot routine and keep it down for a few seconds.

  Good bye

• My Satellite A60 does not detect the WLAN

  Hello

  I just bought a SA 60 128 used laptop. I checked in many ways, if this system has a built-in Wi - Fi connection. I tried to look for this model on the internet to get the setup but I couldn't. Now I use a USB adapter to connect to the wireless network.
  Please help me with this.

  @razan
  Why get you on the net for information if the phone card WLan or not. Simply check the Device Manager and see if the wireless network adapter appears or not.
  In any case, the WLAN USB key is not a bad solution.

• Windows XP does not have the wireless network key.

  original title: Windows XP. A Wi - Fi connection

  I have windows XP. Then when I connect to the wi - fi network secure, it should ask me password, but it doesn't. How to fix this?

  Hello

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like Windows XP will not ask for the password.

  However, we need some more information about the issue to help you better:

  Please help me to answer these questions.

  1. what type of encryption do you use on the router?
  2. do you have the latest drivers for your wireless network card?
  Make sure the authentication IEEE 802. 1 x wireless card is disabled, and check if that helps.
  a. click Start, then select run.
  b. in the Run dialog box type ncpa.cpl and click OK.
  c. right click on the wireless network connection iconand select Properties.
  d. click the Wireless Network tab
  e. click on the Properties button next to remove it.
  f. click on the authentication tab, and clear the enable IEEE 802. 1 x authentication for this network check box.
  g. click OK to Update the settings.

  In addition, visit this link for reference:

  How to troubleshoot wireless network connections

  http://support.Microsoft.com/kb/870702

  I hope this helps. If you have questions more related to Windows, feel free to post here at Microsoft Community.

• BlackBerry Torch 9800 smartphones does not detect the wireless Ad Hoc network

  I try to connect my Torch 9800 for the ad-hoc WiFi network, I put in place on my Windows 7 PC with Internet sharing.  However, the torch does not list even the SSID in the list of detected networks.  I confirmed that the network Ad - Hoc on Windows 7 is in mode ' Waiting for Users ' and the torch can detect other networks nearby.  I tried clicking on "Other ways to connect" and manually enter the SSID, but it still doesn't work.  I've also confirmed that other devices (an another laptop Win7 and an iPad) have no problem connecting to the Ad Hoc network and Internet connection sharing.  Any ideas?

  * AT & T wireless

  * Bundle version 6.0 267

  Hi and welcome to the forums.

  I'm sorry to say that for safety reasons RIM disabled their devices to connect to ad hoc networks

  I know that his frustration... Sorry

  Good luck

• Laptops do not detect the wireless network

  Only 1 of the 3 laptops detects my wireless signal.  I restarted the router, the modem, and other portable... no change.  The signal is strong on the computer, pick up the signal.  What's wrong?

  Hello

  I suggest to refer to this link and follow the instructions in the link below and check, if this can help:

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  It will be useful.

• Satellite L655 - does not detect the webcam

  Dear forum,

  I am new user of the Satellite L655... I just got about 1 month ago. I don't know why, but I can't use my webcam. Whenever I try to use it for Skype or yahoo messenger, it cannot detect my webcam.

  Is something wrong, and what should I do? Can someone help me solve this problem?

  Thank you for your help,

  Best regards
  Yogi...

  Hey Buddy,

  What happens if you start the webcam software? It recognizes the webcam?
  Important point is that if you want to use the webcam with Skype or other programs, webcam software shouldn't start because the two programs try to access the webcam. So close to first the webcam software.

  Last but not least, I would recommend reinstalling the driver from Toshiba Web site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Windows does not recognize the wireless network card drivers

  I have a laptop Compaq nx9010 XPsp3 I runnings tried to install the drivers for a laptop of Belkin F5D8011 wireless card.
  I downloaded the correct driver in the downloads folder, but when I point the driver update wizard in the file I get a message telling me that there is no driver in the folder files. Belkin were not very useful, they just gave me a link for the driver.

  Is that mean that the driver is not suitable for XP, even if Belkin says it's? Is is possible to install the driver, without the help of the wizard? Is there something wrong with XP (newly installed)?

  Perhaps the file is a. EXE which must be run to install the drivers?

• Satellite M40 does not detect the battery

  I formatted my laptop and installed xp and I have problem with battery
  The Device Manager shows that without pilot and don t see autonomy and no change when you plug in the power adapter.

  Is there a driver for the batteries? Or if windows detects

  > Is there a driver for the batteries? Or if windows detects
  Are you serious? You need a battery driver?

  Sorry, but buddy I first heard about this driver there is NO driver battery and you don t need these drivers.

  The battery should be detected automatically by the operating system.

  If you want to see the battery in the taskbar, then I recommend that you install the Toshiba Power Saver. The energy saver must switch to the battery during the passage of the AC adapter in and out.