Satellite T110-107 restore win7 after replacing hard drive

Similar Questions

• Satellite 1410 714 extremely slow after replacing HARD drive

  Hello

  I have a Satellite 1410-714 which has had a hard drive failure. I replaced the drive, but now the computer is extremely slow. Windows has been reinstalled, it was really slow too much and now it takes minutes for windows to start.

  I suspect that something might have broken on the motherboard and the hard disk. I checked mobo replacement parts, but have not found anything for-714, so a 1410 mobo compatible? This model has a processor celeron 1.8.

  Thanks for help.

  Hannu

  Hello

  I can t think the motherboard is broken after replacing HARD drive.
  I suggest updating the BIOS first. Maybe your old BIOS have a few problems with the most recent HARD drive.
  Please check site driver Toshiba for the latest version of BIOS.

  Have you used any anties Virus applications?

• Satellite L300. How to restore Vista after replacing HARD drive?

  This hard drive died a week after I bought the laptop just for a month ago.

  Then, I favour toshiba wrote and said that it be fixed in the rehabilitation of specific local store.
  Then store made me a new hard drive, so the files have disappeared.

  There is not any operating system is installed there, and I was not even trying to create a before recovery disk.
  To restore the system to the L300, it must use its recovery disc, as soon as I hear?
  The original system is vista. When I tried to insert a xp disc, it showed error after all the loading "stop: 0x0000007b...". »
  Could someone tell me how to handle?
  Thank you very much!

  > There is not any operating system is installed there, and I was not even trying to create a before recovery disk.
  Bad, bad. Buddy. Generally, you need to create the recovery to the first disk using the laptop.
  T did not read the user manual? Didn't you see the reminder?
  It s always recommended to create the recovery disk!

  > I've heard to restore the system to the L300, it must use its recovery disk, right?
  Yes, you are right. In order to restore the Vista, you must use the recovery disc!

  > The original system is vista. When I tried to insert a xp disc, it showed error after all the loading "stop: 0x0000007b...". "Could someone tell me how to handle?
  I think that it does not work because of controller SATA HDD.
  Either you'll assign compatible SATA mode (in BIOS)
  Or you must include the Windows XP SATA drivers.

  Check the HowTo of this forum area to get some details how to integrate the SATA (AHCI drivers) in Win XP.

• How can I restore Vista after replacing hard drive?

  Hi I have a PC laptop toshiba stellite with basic windows vista preinstalled, I suffered a hard drive failure and I had to install a new hard drive, I did save the procedure hard disk original and recorded on the disc but the disc will not work on the new hard drive, I have still the product key for the original operating system can I how can restore the operating system to factory condition

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• satellite 2520cdt is very slow after replacing HARD drive

  My Satellite 2520 CDT is the HARD Mk 4309 MAST 4.3 GB default disk. I replaced the with the Toshiba MK 2016 GAP of 20 GB.
  I use Windows 98 since the original installation CD. The laptop is now very slow, it takes minutes to start programs, etc.

  I installed the latest BIOS with no improvement. Probably the laptop cannot manage the size of the HARD drive.

  Is there a solution?

  Hello

  I had the same suggestion. I think that the large size of the HARD disk is responsible to slowly start performance. But I wonder why BIOS recognize the HARD drive?
  However, try to defragment the HARD drive.

• Satellite C650, media recovery fails after replacing HARD drive

  I have a 3 years C650, and the HARD drive has failed. I got a replacement drive and sorts to recover from the recovery media disks that I created and although he claimed to have re - partition the drive and reinstalled windows, windows startup fails when tried to configure the devices "could not configure windows to run on this hardware.

  After this error, the boot sequence goes into an endless loop, asking to start the installation procedure.

  Thinking that my records may have been corrupted, I ordered a set of Toshiba recovery disks. Once again, these go through the recovery process and still once, Windows startup does not exactly in the same place.

  A little annoying to have spent £30 for nothing.

  I have a picture of Windows system on my external HARD drive, but I can't get the machine to a point where it will actually start so I can recover from that.

  Any suggestions on how to proceed is welcome!

  Thank you
  Martin

  Hello

  Of course, this isn't a problem of recovery disk.
  I guess there is a problem with the HARD drive but I n t think that the HARD drive has failed I think there is a problem of setting

  First, you should go to BIOS and check if the SATA set to AHCI.
  Then you should also format the HARD drive again.

  I recommend to use the freeware tool called GParted. You could create a live USB stick bootable flash memory which will allow you to start the unit and start GParted tool.
  Format the HARD drive, and then create a partition.

  After that, take the recovery disk and start the recovery procedure.
  Good luck

• Satellite Pro 2100: How do I reinstall the OS after replacing HARD drive

  I have a Toshiba SP2100 and I want to replace the hard drive, but I don't have any recovery CD
  So, how can I put the o/s back on?

  Try to connect the external HARD drive to the computer via the USB port and try to copy all content from the internal HARD disk external HARD drive. Then you could try to insert the external HARD drive in the laptop.
  But I've never tried this procedure and don t know if it will work.

  But usually after replacing HARD drive you should boot from the Boot CD as recovery CD or the original CD of Microsoft Windows.
  After the installation of clean Windows OS, you can visit the Toshiba drivers and you can download and install the drivers of Toshiba and utilities.

• Satellite C870 - 1 K 1 and replacing hard drive

  Hello

  I would like to replace the hard drive of wonderful this notebook with a hard disk of 500 GB 750.
  How should I proceed with the Windows installed on the original hard drive, the migration to the new.
  I do not have a CD ROM of Windows 8, was not included when I bought the laptop

  Thanks for your help and suggestions...
  Greetings

  Lambert (Belgium)

  If you use your laptop with an original operating system preinstalled, you can create recovery media using pre-installed recovery media creator tool. After replacing HARD drive, you can use this media and reinstall the original recovery image.

  After that your laptop will again have to factory settings.

• HP Pavilion 17: mouse pad does not work after replacing hard drive

  Hello

  After replacing hard drive and installing windows 8.1, I can't use my mouse pad.

  I installed the Synaptics driver but it didn't help.

  How can I check that mousepad device is not damaged when replacing the hard drive and which also can I try to fix the mouse pad?

  USB mouse works fine.

  See you soon

  The only way to be sure is to open it up and see if the touchpad cable was disconnected during the upgrade of the hard drive. That's my bet. Easy to forget when you're winding. You don't provide complete model number, but many of the recent models Pavilion 17 require removal of the cover together to get hard disk that requires disconnection of the touchpad cable.

• After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc.

  Original title: dvd player

  recently replaced HDD and reintegrated windows 7.  Now my dvd player cannot play a bluray disc.  Any ideas how to solve this problem?

  Duplicate the content of the thread:

  After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc

  My hard drive recently broken and we replaced and reinstalled windows7.  Now I'm watching a Bluray DVD and the drive will not read it.  I tried the fix auto and that said they detected a problem but can not fix this.  Any ideas?

  Hello

  You can check these links and try...

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  http://support.Microsoft.com/kb/982116

• Satellite U840 - how do I reinstall Win 7 after replacing HARD drive

  I had a HARD drive error.

  So I formatted the hard drive (after trying for months to get the process to finally finish that)
  Now, I a U840 Satellite with a clean HARD drive and do not have the installation for Windows 7 discs.

  I searched the net and found nothing of use!
  Help, please

  see you soon
  Nick

  Hello

  You need to create the own recovery in the past disc!
  This recovery disk allows you to install the Toshiba image after the HARD drive is dead or has been replaced.

  In case you have not created this disk, it is possible to order this support:
  http://backupmedia.Toshiba.EU/landing.aspx

• Error "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. "after replacing hard drive

  I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.

  The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.

  I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.

  Operating system is Vista 64 bit.

  Original title: Windows Update

  I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.

  The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.

  I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.

  Operating system is Vista 64 bit.

  After the upgrade to the bigger hard disk, I found that the technology Intel Rapid Storage Technology driver should be updated. Once this is done Windows update ran properly. Microsoft Fixit did not help in this circumstance.

• Satellite L300 - cannot install Microsoft updates after replacing HARD drive

  I am repairing a Satellite L300, which had a dead HARD drive. I replaced death 160 GB of HDD with a 500 GB WD, then used the recovery disks to install Windows Vista SP1 at the exit of the State of the box.

  Now, Windows update does not work, won't install autonomous not of Vista SP2 I downloaded, MS Security Essentials moved there also.
  Then I borrowed a 160 GB of work and went through the same process and everything works fine.

  To make it work with a 160 GB HARD drive, but not a 500 GB HARD drive. Why?

  > ... Standalone Vista SP2 I downloaded will not be installed
  Usually after installing recovery image, you have just to connect laptop to internet and after a short period of time, you will get messages about available Windows updates. Just install the offered updates process automatic Waterer and install important updates only.

  Let the system to install all the updates and don t force the installation of some own downloaded stuff.
  Last month I've updated HARD drive (320 GB I think) and installed Win7 on friends L300 and I didn't noticed any problem here.

• Satellite U940 - Random BSOD after replacing HARD drive

  Good day ladies and gentlemen!

  I was wondering if I can win some lights here - as I google myself in a bunch of flange on the issue, I have!

  I am a famous computer technician (modest too) and more recently, a client of mine introduced me to a ultrabook Satellite U940 - lovingly with the SSD / HDD Raid 0 configuration running our beloved Windows 8.

  All things according to their entire course - Hitachi hard drive failed (as google tells me is to be expected).

  So, I replace the hard drive by a great little number Western Digital, cloned from Hitachi, sector by sector, and after a significant cajoling with bcdedit and bootrec amount, I could so he could begin our good liked Windows 8.

  However, since then, I have random BSOD, cold boots failed and all sorts of errors.

  I ran all the regular patches - SFC/scannow, chkdsk/r, Windows 8 repair facilities, etc., but it is still volatile jolly.

  Things seem not to be as they were with this Satellite little ol '-before any repair, the peripheral device manager showed two "RAID 0' in the category of hard drives, and since then it shows the individual SSD and the WD HARD drive."

  I've updated the driver for the Intel Rapid Storage at latest on the Toshiba site, but nothing helps - alas!
  The weird part is that if I do a reboot on this little beauty, she starts without any problems, but a start cold after a power off is a completely different question - dummy - spit crashing, dumping, in general!

  If there is a troubleshooting there champion who can destroy my help in this situation, I'd be very impressed and never have if they could provide assistance in this regard.

  Unfortunately Microsoft - are we are all end by using these products of ever-so-pretty Appl?

  Hello

  I read in some discussions here in this forum only after replacing the disk SSD or HARD drive, the RAID configuration is lost and must be rebuilt on a device Windows 8.

  But this can be done very easily, and this can be corrected by an authorized Toshiba because this procedure requires special tools and utilities.

  Unfortunately, it seems to me that you will need to contact the ASP in your country to get this problem resolved :(

• Satellite A135: Vista will not start after replacing HARD drive using the recovery disk

  Toshiba Satellite A135-s7403 HARD drive failed, I have replaced the 80 GB with a WD Scorpio blue 250 GB hitachi. When I try to restore with recovery disk came with the laptop, it passes through two discs 1 and 2 and starts with the start-up of windows for the first time and then runs to the greenish with the spinner blue screen please wait... thne black screens for a second or 2 and then back to spinner, please wait and then it appears the box "installation of windows could not configure windows to run on hardware. This computer' only option is to click OK.

  Where to click ok, you get an another msg that says "windows could not complete the installation, install reinstall windows. I tried like 50 times now. Startup Repair indicates the root = failure cause while the installation program is underway. I know that my drive are good, as I adjusted used then about a month when I upgraded the memory because the original memory 512 MB was not enough o well running vista.

  Hello
  To be honest I n don't know what the problem is there but can you get the original installation disc of Microsoft and try to install the OS, just to see if the OS installation will complete successfully?