Satellite T110 - Defective Bluetooth after waking from sleep

Similar Questions

• Satellite P300 - white screen after waking from sleep state

  I'm having this problem:
  The LCD screen may be empty when the computer is "awakened" from the sleep state. Nothing is visible on the internal LCD or an external monitor.

  There seems to be a solution:
  An update of the firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.

  described here: [white screen after awakening from fallback status | http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlView.jsp?soid=1642844&moid=1209152]
  -----
  I also found this, but it didn't really help me much further.
  [Satellite P200D and WinXP: no display after waking from sleep mode | http://forums.computers.toshiba-europe.com/forums/click.jspa?searchID=880412&messageID=118143]
  -----
  In fact, I think I'm able to solve myself, and I don't like not my laptop to be gone for two weeks or more. I just need some advice on where to find a correct upgrade. Is - this driver BIOS or graphics? Which version should download, where... etcetera. More tips on how to solve the problem are also welcome.

  -----
  Edit: link and no need for words of line. : s
  Edit2: grammar correction.

  Hello

  > An update of firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.
  If you check the Toshiba document you would see that your Satellite P300 is not related to this issue.

  In your case I would recommend upgrading the BIOS and graphics driver.
  In addition to keep your operating system up-to-date.

  I had this problem under Win XP and a MS patch and an update of the graphics card driver helped solve this problem.

• Satellite A660-18 - powers off after waking from sleep mode

  My powers of Satellite A660-18 wide for 2-3 seconds after waking from sleep. I upgraded the memory from 4 GB to 8 GB, using the site of Crucial, so I know it is compatible. BIOS is updated to 2.00.

  Don't know what to do, how can I fix without turning off completely from mode "sleep"?

  Hey Buddy,

  > I upgraded the memory from 4 GB to 8 GB
  And have you had the problem before you upgrade memory too or as memory upgrade?

• Photoshop CC 2014 quits unexpectedly after waking from sleep on Mac OS x. How can I stop this?

  Photoshop CC 2014 quits unexpectedly after waking from sleep on Mac OS x. How can I stop this?

  suturenet wrote:

  It's a stupid system, it won't let me post more of the report.

  Yes, the forum software is stupid, but you are insulting the wrong people.

  BOILERPLATE TEXT from the FAQ:

  https://forums.Adobe.com/thread/375816?TSTART=0

  Do not be abusive or aggressive in your tone

  A post of sounding aggressive, demanding, accusatory or abusive will often evoke a response aggressive or abusive and unnecessary.

  Remember, you do not discuss Adobe here in the user forums.  You ask the help of users of volunteers like you who give their time for free. Nobody has any obligation to answer your questions.

• Satellite L40-139: new graphics driver is causing the problem after waking from sleep

  I have a three month old Toshiba Satellite L40-139 (PSL40E) with 1 GB of RAM with Microsoft Windows Vista Home Premium pre-installed. This laptop worked very well for me for the basic headquarters far tasks, and I would have no problem recommending.

  In the last days I've updated the software and drivers from the Microsoft Update web site.

  Since the update driver Mobile Intel(r) 945 Express Chipset Family (to version 7.14.10.1350, dated October 18, 2007), the screen resolution at 800 x 600 after awakening from the sleep state. The only way I found to fix it is to restart the PC.

  Other articles published on the web, I understand that this particular driver (Mobile Intel(r) 945 Express Chipset Family driver 7.14.10.1350 version) has caused many other problems on a variety of hardware and software platforms.

  Does anyone have a definitive solution for Satellite L40?

  I looked at four options.

  1. let the new installed driver and restart Windows each time after waking up from sleep mode. Rather, I must not do this.

  2. using the Restore Point created by Windows Update before the update of the driver, roll back to an earlier time. This seems to be a good course if it works.

  3 download an older version of the driver and reinstall it. I don't know which version would work but note that others have had success with the 7.14.10.1280 version. I guess a similar version could be included in the driver Package that can be downloaded from Toshiba Europe site, but have heard that the time required to download this software can exceed ten hours and am therefore reluctant to try.

  4. the fourth option is not really possible. I should be able to "Roll-Back" the driver in Device Manager, but the button is disabled.

  Although only a minor problem, it is very irritating and I would like to address them without causing other problems. Does anyone else have this problem? Someone has fixed it successfully?

  Hello Peter

  If I understand correctly, you use your usual laptop for daily work and you don't need any computer high-performance notebook. If I'm right I have to say that you should be happy if the laptop works well and stable.

  I don't really see any reason why you wanted to update chipset driver. In any case, you should try to roll back the BONES of time earlier and I hope everything will work again. There is absolutely no risk, and you can test it.

  Please post the result.

• Bluetooth is not ready after waking from sleep on Windows 7

  After updating my Tecra M10 Windows Vista x 64 Enterprise to Windows 7 x 64 enterprise, sometimes, when I wake up the laptop from sleep, Bluetooth is not ready.

  Hibernation does not solve the problem, he needs a reset which is a problem for me because I usually have a lot of open applications.
  In this case, the only Bluetooth devices in Device Manager are:

  * Bluetooth RFCOMM
  * Bluetooth USB Controller-5 at TOSHIBA

  When everything works well, the Bluetooth devices in Device Manager are:

  * Bluetooth RFBUS
  * Bluetooth RFCOMM
  * Bluetooth RFHID
  * Bluetooth USB Controller-5 at TOSHIBA

  How can I restart Bluetooth without having to restart the entire system? Turn wireless on and off the silder side does not work.

  Thank you
  Paulo Morgado

  Thanks for sharing!

• Desktop computer does not display the computers on the network after waking from sleep.

  Both computers work on Vista Home Basic. Problem started after computers, the router and a DSL modem has been turned off and unplugged. After the awakening of the day before, the Office would display only the router and the laptop, but the way that he could not establish. Initially, a reboot of the desktop computer has solved the problem.

  Reset and re-installed the router. The three elements of the network were visible after the start, but IE 8 soon at the opening of the homepage. Again, after "standby" mode, only the router and the laptop displayed.

  After additional restart, only the router is displayed. The laptop shows all three elements and accessing office files.

  Suggestions?
  Mike

  Hi Syed,

  I did a full reset/reinstall the router, carefully following the manufacturer's instructions. Both computers are displayed in each of their respective lists of network, even after waking up from sleep mode.

  This issue is resolved.

  Thank you

  Mike

• black screen after waking from sleep

  have a 2009 Intel-based iMac that wake properly from sleep if more than 30 minutes. It is a screen 24 '', 5 GB RAM and processor Core 2 Duo 3.06 GHz, 256 GB SSD drive and was just upgraded to El Capitan at the start of this behavior. The extra RAM and SSD have been installed a few days before the upgrade of El Caitan, so am not sure that the upgrade of the OS was the culprit, but it seemed to work normally after the SSD and RAM have been added. After that the computer sleep long enough to power down disks, etc., the screen remains dark when the computer wakes. If you put it to sleep then it wake up immediately he returns normally without problems. You can hear the startup sound and can even connect and enter the password and hear the mail and other programs that are running, giving their notification sounds, etc.. However, the screen remains dark. If you restart it 10 or 15 times the screen will start normally and the computer works perfectly. diagnosis seems to indicate normal operation. I tried to reset the SMC and the NVRAM and start in safe mode, but these things have no effect. Is it possible to get help with this?

  I run Apple Hardware Test and found no hardware problem under standard test or extended. I ran the first aid on the SSD, but no permissions problem have been found. It is not as if I have a hardware problem, but a problem of software not defined.

• Wi - Fi disabled after waking from sleep - G9-591-70VM

  A few days after the awakening of the laptop from sleep, the WiFi has been disabled.

  Only the ethernet with a red 'X' icon was present.

  Troubleshooting and looking in the network settings of the Control Panel, it was as if a Wi - Fi connection did not even exist on the laptop.

  Restarting the computer does not resolve it. Stop and start the dos system did.

  It happened again just now. All this experience? Thank you

  Hi Kenshin

  What network killer driver do you use so that what happened?

  If you use a driver updated the Acer (pre-installed with the machine) I recommend that you download the new driver directly from the site of the network Killer (here)

  1. uninstall the driver of killer

  2. restart the system

  3. install the new downloaded driver

  4 restart once again

  After that I did anything ever happen related to the network for me yet once (for example, BSOD, lack of WIFI, etc.).

• My PC loses connection local and Internet after waking from sleep/hybernation.

  My PC loses connection local and Internet after wakes up from sleep/hybernation. The problem is solved by resetting the network card, but it is frustrating to have repeated resets every time the system in place to wake up. I am looking for a patch, I searched all the support sites and forums where there are similar problems that have been offered to different patches over time, but each of them has failed.

  Vista 64 SP2

  Hello

  Check the updated drivers for the NETWORK card and WiFi.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat above for network card (NIC) and is a good time to get the other updated drivers Vista
  love the updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Also, check the power supply for the device management settings in device - double click Manager
  the device and the power management tab.

  ==============================================

  More if necessary:

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• T400 not re after waking from sleep - w7

  I have a t400 with integrated f5307g wan device, which works very well, but after I wake the laptop from sleep, the wan card disappears in the menu fn + f5 and can not be turned on. I have to restart to reappear.

  IM using windows 7 with the latest drivers (according to the lenovo system update). does anyone else know this?

  has not tested linux? If so, reset BIOS default values and should be solved.

• LR 6 is unresponsive after waking from sleep

  I upgraded to LR 6 in January, and all was well until a few weeks ago, when everytime I wake up the computer from sleep mode, if LR is running, it stops responding. No amount of waiting will allow to become sensitive.

  Of course, I could just leave before going to sleep, but because it takes a while to start, I'd rather not.

  I tried to delete all the related Adobe prefs.

  Technical specification:

  MacBook Pro 2011, 16 GB RAM, new logic board after the failure of the GPU (twice)

  LR 6.3

  Mac OS 10.9.5

  OK, you have almost eliminated a faulty hardware.

  Problem blocking 6 Lightroom on MacOS 10.9.5 wakeup | Community customer Photoshop family

  I noticed you talk about reset the LR preferences file, which will cause support GPU to be re-enabled by default.

  Please check the LR Edit menu > Preferences and make sure you have "USE Graphics Processor" unchecked as below. Close all applications, shut down your system, and then restart your system. Even if it is a test not controlled start/stop of the cycle for the chance and see what happens.

  

  

• Safari crashes after waking from sleep mode mac mini

  And to make things more awkward, it seems to freeze with youtube and google. He has not done this since the beginning. Lately, he's starting to do this. It is so boring. All other sites work except these two, or at least those's ones I learned to freeze. Open a new Help window sometimes. But earlier, I had to start the mac everything again to access youtube. So what to do? After the mode 'sleep', I can't seem to google, but I can get to atavist for example. YouTube is the only place that I can't replace and for real - it's so idiots clitch he needs an explanation.

  Try the suggestions in this article http://osxdaily.com/2015/01/18/troubleshoot-safari-freezes-crashes-mac-os-x/

• WiFi disconnects after waking from sleep

  Hey guys,.

  I hope someone can help me with this... I have a 2015 mid pro 15' mbp and about 3 months ago, it began to show this problem, whenever I close a lid for like a hour or more, or standby manually, and when I come back and it up once again, he start connection losses for like a minute, after waiting, he returned again to a wifi connection... I have to say its strange, especially when I active power nap...

  To be honest, Im not sure if its failure of my router (which is Asus RT AC55U) or macbook, if someone could answer me with some advice or guide I would be grateful

  Or is - this common cause? I was looking for a little bit, but found only questions that he used to connect again at all. (Mine reconnects in 1 minute or so, but I like things quite well, and it drives me crazy, because I don't know why the connection loss occurs).

  Once again thanks for any advice/help etc.

  WiFi will probably through authentication after waking up

  Try plugging a router and modem for 90 seconds and plug it back

  See if this will have an impact

• Computer is slow after waking from sleep mode

  Original title: my computer is very slow to wake up from sleep mode, especially in the morning, how can I solve this problem?

  Every morning, I'm not able to open any program. If I click too, it freezes andgets cloudy. I know that this is not a virus, because I used my Norton Power eraser and it found no threat.

  Hi OtiliaRodriguez,

  -Did you of recent changes made to your computer before this problem?

  Look in the event viewer to see the error message or error code originally this problem.

  The event viewer is an advanced tool that displays detailed information about important events on your computer. It can be useful when troubleshooting problems and errors with Windows and other programs.

  For more information, see:

  Open event viewer

  What are the information in event logs? (Event Viewer)

  In the meantime, try the steps listed in this article:

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista