Satellite T130 - 10G - how do I boot from the USB drive?

Similar Questions

• Tecra M2 - boot from the USB drive

  Hello
  Why Tecra M2 didn't boot from the USB drive in the BIOS?
  Is posible put in place this function in the new BIOS.

  Good bye

  Hello

  Good questions for Toshiba engineers.
  I don't think there is anything you can do about it. :(

• Satellite 5205-s705: How can I boot from the CD/DVD drive

  I can't run Setup from my cd/dvd rom, there is no such option in the BIOS Setup. How can I boot from the cD or DVD?
  Please, help me!

  Hello

  You are not able to boot from the CD/DVD drive?
  If you are unable to change the boot order in the BIOS, I would advise you by pressing the F12 key immediately after starting the laptop.
  A start menu should appear, then you should be able to choose the reader of CD/DVD (ODD).

  You can also try clicking on the C instead of the F12 button. The C button the STRANGE start.

  Check this back and forth!

  Good luck

• Satellite L505-13U and "quick start" - boot from the hard drive bbs appears

  Hello

  I just bought this laptop
  When I changed the startup on "quick start" method
  now the laptop will not boot
  I have the stack screen see just "bbs-hard disk... boot. »
  I can't enter to the bios f12 f2 does not work
  tried the keyboard and remove the hard disk without result

  Someone help me please

  Hello

  Read this thread, the Andrusito guy explained how he has disabled it:

  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=208999#208999

• Satellite 5100 503: unable to boot from the CD drive

  Hey all,.

  I have a HUGE problem with my 5100-503 Satellite.

  Windows XP connects and then it disconnects right away.

  I found a fix for this at: [url] http://www.mcse.ms/message616432.html {/ url}

  The problem is that I can not boot from a cd, because the BIOS is configured to boot from the hard drive first.

  I get into the BIOS. I read on a few websites on the net than on machines 5xxx Satellite, you can only enter the bios through windows! ..., BUT windows does not work so I can't enter the bios. I can't even use the Windows installation CD when I boot, because once again the HD is set to boot first.

  When I press ESC while turning on the laptop and then press F1, I have the option load default BIOS values. I did, but the HD is still set to start first!

  What I can do... I can't reinstall windows or get into regedit to fix the paper / log problem!

  Help!

  Hi Jamie,

  Normally, you can select a boot device selection menu when you turn on your laptop. You can do this by holding down the F12 key when you turn on. Hold it down until the phone beeps or the device selection menu appears.

  If this does not work then you can try the shortened Toshiba habit that is to hold the 'C' button in the power that would then cause the laptop to boot from the CD drive. Of course, there must be a bootable CD inserted first.

  Kind regards

• How to boot from the flash drive which has xp to install an OS?

  Boot from the flash drive

  How to start from the flash drive which has xp to install an OS

  the system's model of netbook rlg

  Intel Valérie mgsone

  How to install Windows XP on a Netbook using a USB flash drive
  http://www.TechSpot.com/VB/topic160906.html

  J W Stuart: http://www.pagestart.com

• How can I boot from the Windows 7 Installation CD so that I can reformat the hard drive before reinstalling Windows 7?

  How can I boot from the Windows 7 Installation CD so that I can reformat the hard drive before reinstalling Windows 7?  I have already reinstalled Windows 7 from the CD, but that has not solved my problems.  When I put the factory CD in my CD player, it won't always boot from the CD.  When I put my Windows 7 Ultimate CD in the CD drive, it doesn't always start from the CD.         I realize that the reformatting is not always necessary, but I caught a few viruses (despite anti-virus running) and I need to start with a clean hard drive.

  On Friday, January 9, 2015 14:30:32 + 0000, BlueKodak wrote:

  How can I boot from the Windows 7 Installation CD so that I can reformat the hard drive before reinstalling Windows 7?  I have already reinstalled Windows 7 from the CD, but that has not solved my problems.  When I put the factory CD in my CD player, it won't always boot from the CD.  When I put my Windows 7 Ultimate CD in the CD drive, it doesn't always start from the CD.

  You must go into the BIOS and change the boot on CD order
  first push.

  How to get into your BIOS? It is not dependent on Windows, but on what he
  motherboard/BIOS card that you have. In fact, you need access to the
  BIOS before Windows begins to start. A common method is to press
  the key delete when you turn on first, but this is not necessarily true
  for your computer. Watch the display carefully when you start first;
  There is often a message here to tell you what to do. If this is not the case, check
  your system documentation or check with your provider.

• Boot from the 2nd drive HARD modular bay adapter (satellite P20)

  Hello

  I have a SP20-102 and I replaced the stock model with a 120 GB Seagate HDD and moved the original disc in a Module Bay HDD adapter.

  Is it possible to configure things so I can choose which HARD drive to boot from at the start, i.e. it is by default on the internal HARD drive but I can't choose to boot from the HARD drive in the modular Bay?

  I tried pressing F12 to boot device selection screen, but am unable to choose the 2nd HARD drive.

  Any ideas?

  R.

  Hello Robin

  As far as I know that it is not possible to boot from the external HARD drive. It is not supported.

  Good bye

• Equium A60: is it possible to boot from the USB port?

  Hello

  I have an EQUIUM A60 with BIOS Version 1.90 is possible for a start of the USB port using an instead of a floppy mass storage device if yes how?

  Hello

  You can boot from the USB ports with a floppy drive floppy drive. You cannot boot from USB HDD or USB
  Boot devices: HDD, ODD, LAN, USB - FDD

• Boot from the DVD drive on a compaq evo N610C

  Hello everyone, I try to start my computer from the CD/DVD with success.

  I use a win98 boot CD, is this OK? Or do I need another type of boot cd?

  I checked the CD on other computers, and there it works fine.

  Hoping for help

  P.S. This thread was moved from the business PCs - Compaq, Elite, Pro for PC - portable Omnibooks, EVO. -Forum moderator hp

  WL37 wrote:
  

  It's one of the problems, the bios, the parameter does not have the ability to boot from the CD/DVD.

  There are only three choices:

  start from laptop, multibay

  boot from the hard drive to laptop or computer ethernet startup.

  I also have uppdated the bios, but nothing changes.

  'Notebook multibay shoes' should work - the CD is installed in the multi-baies slot.

• Reinstall vista again HARD drive now PC don't can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop

  Duplicate info wire - running kill disk, vista disappeared and my laptop does not see my dvd/cd drive and I can't reinstall vista OS because of this problem

  Have to reinstall vista on a new HARD drive now PC can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop?

  The DVD player worked before HARD drive went bad now, it won't work.

  And I just replaced the HARD drive, but now cannot load an operating system that he...

  Help, please...

  Hi dynamitenews

   

  1. are you able to boot to the desktop?
  2. what happens when you try to start the computer?

   

  You must have the DVD drive to start the computer using the disk, you cannot use the external hard drive to do the same thing.

  Also I suggest you to make sure you have defined the start as CD/DVD-Rom as the first choice option in the BIOS. See below the help link-
  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  If nothing is done, then you can contact the manufacturer support for assistance on setting up the correct boot sequence and check.
  
  BIOS WARNING-
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  I hope this helps.

• Computer tries to boot from the external drive

  I use a desktop computer with Windows 7.  I have an external hard drive connected as a backup drive.

  While booting, the computer tries to boot from the external drive and nothing happens.

  In order to get the machine to start, I have to unplug the drive hard Ext., which is a waste of time.

  I would like to back up on the drive internally the computer c:

  Is there a way I can stop trying to boot from the external drive?

  At the start of the pc, open the BIOS, usually output tab, search (priority boot device), set C: 1st, 2nd or 3rd external

  Save and exit. Also, more need of HDs to put in shape before using it, most come in a "raw" State the mfg

• boot from the flash drive on a dimension 3000

  XPSP3, completely up to date, 3000 dell dimension

  I have booted from the flash drive once a long time ago and I have still now because my cd player is not good according to imgburn and dell did not buy, I looked. :)

  The only question about it in my search for this forum was 10 years ago, and the op had no satisfaction.

  I took action: drive startup laptop computer (dell), so that's good, will load files on the 3000 and then reach the point Windows starts up, and then I get a blue screen 07 b, any file in the list, just telling me to uninstall a driver or a controller, I have not installed one, :)

  any ideas?

  INSTALL full XP on USB flash as boot drive is not supported.

  Hirens is WINPE no full XP.  XP is not and is not supported as a boot USB and run all option.

  You need to do a real hard drive your boot drive.

• (Redirected) Cannot boot from the HARD drive on dell n5010 with SSD and HARD drive installed

  I have my old dell n5010 (15R Inspiron) with SSD (Samsung EVO 840 120 G) installed on the main drive Bay and the HDD (Samsung HJJ 500 G) on the optical drive Bay.

  It is a typical way to add an SSD on such an old laptop (bought from dell.com.cn in 2011).

  My Windows 10 operating system has been installed on the SSD using Samsung Data Migration software, so the previous C drive was pointless. So I formatted and installed an operating system Ubuntu 14.04 on it, hoping the grub OSs double beginning located on the HARD disk.

  However, I find no the Dell bios boot option to boot from the HARD drive installed in my optical drive Bay. All the choices are 'Hard Drive', 'Network' and 'Diagnostic '.

  But I was definitely sure that my bios program has detected the SSD and HDD with information on the main menu of the bios.

  And the LED on the optical drive Bay was immediately once I pressed the Start button on my laptop.

  As a general rule, all things were right except for options of the bios boot.

  Is there a way I can boot from HDD (with installed Ubuntu) while remaining has my SSD on the main drive Bay? I don't want to swap their positions, because the SSD is super fast on the main drive Bay.

  I have alse won't migrate 10 Windows to the HARD drive and reinstall Ubuntu on the SSD, because I'd like my windows be loaded quickly.

  Someone at - it the same problem with me?

  Any suggestion is appreciated!

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• How to force boot from the CDROM on Satellite M40 183

  I have error in the MBR on the drive in my laptop, it doesent from disk, before I had put into hibernation system (Windows XP).

  Now, I can't force boot from the CDROM
  in the bios, CDROM is selected as first boot-> nothing
  on bootking, I am pressing end F12 choose CDROM icons-> notking
  on bootking by pressing 'c'-> notking

  and I have a problem:
  -system does not boot
  -recovery disk will not start, and I can't fix it :/

  I'm sure that the cd drive is right.

  I recognized before, makes this hibernation, it is imposible to boot from the cdrom

  but there must be a way to force anyway.

  Thanks for any help.

  Mateusz

  Hello Mateusz

  The hibernation mode cannot be responsible for this kind of question. I'm sure that this option is properly put to the test and if there is some sort of suspicion it won't be available more.
  If you have any problem with MBR, it can also be damaged by some kind of virus. As far as I know that the easiest way to repair or rebuild MBR is to run the standard Microsoft called FDISK utility with a parameter/MBR, as
  A:\ > FDISK. EXE/MBR
  FDISK is a standard utility included in MS-DOS, Windows 95, 98, me.
  Please check this page http://www.microsoft.com/resources/documentation/Windows/XP/all/reskit/en-us/Default.asp?url=/resources/documentation/Windows/XP/all/reskit/en-us/prkd_tro_evwd.asp Microsoft
  Good bye