Satellite T130 - 11 H Factory Reset - problems later

Similar Questions

• Satellite L750-115 and Factory Reset

  Hello, I watch/read thousand video's / forums on how to factory reset in the Toshiba Satellite L750-115. Everywhere I found that "press 0 during startup. But it didn't work for me. When I try to get help from the toshiba Web site, I can still get my cell phone.

  If anyone can help me, it will be very nice...

  In General, you have two options:
  You would use HARD drive recovery option to recover the computer laptop back to settings factory, or you must use the recovery Toshiba (disk or USB) media which must be created using the Toshiba recovery media creator software.

  But this means of communication should be established as long as the laptop works properly...

  Have you created this support in the past?
  If this isn't the case, you can use the option of recovery of HARD drive, BUT ONLY if the HARD drive and partitions are not affected!

  I guess that Windows 7 is pre-installed on your laptop.
  Well, in this case power unit, then press F8
  Then you should get the advanced boot menu... Choose here: fix my computer...
  Then Toshiba HDD recovery.

  If this is not possible, drive HARD recovery is not possible and the only way of recovering the laptop is the use of the recovery disk...
  As mentioned, if you do not have the disk, you can try ordering this support here:
  http://backupmedia.Toshiba.EU/

• HP 15 laptop: factory reset problem

  I have my laptop HP 15 factory reset and it has been said to 99% for four or five hours now. What is a normal process or should I just wait it out until he finishes? I have my computer laptop factory reset because I could not remember the Windows password to connect to the computer while I was put in place.

  anconelly wrote:
  I have my laptop HP 15 factory reset and it has been said to 99% for four or five hours now. What is a normal process or should I just wait it out until he finishes? I have my computer laptop factory reset because I could not remember the Windows password to connect to the computer while I was put in place.

  That doesn't look good... a couple hours but goes on five hours is something serious goes wrong. Maybe you should order the HP factory recovery disc and try again. I think that something has gone wrong here.

  HP computers - get HP recovery disks or HP USB recovery disc
  Read this before ordering your recovery discs! (United States and Canada only)
  HP computers - performing a recovery of HP (Windows 8) system

• U2412M monitor factory Reset problem

  When you try to Factory Reset my monitor, when the box "Are you sure you want to reset to the default settings?" appears, I can't my cursor in the box to get to 'Yes' / 'no '.

  The cursor continues to go behind the message box.

  Any suggestion would be appreciated.

  The manual is not in the details, but you must use the buttons on the monitor down to somehow select Yes, then accepts when the green check mark.

• Satellite T130 after factory reset problems

  As the title says I have problems with starting laptop because it always displays the first menu to boot from. Toshiba.
  Why my topic has been deleted?

  The subject was not deleted but moved to another section.
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=257385
  You can find all threads by clicking on your nickname ;)

  By the way: you must follow the first thread to avoid misunderstandings.

• Get a "Cannot find the files needed" error while trying to do a factory reset on ASUS zenbook.

  * Original title: "can't find the necessary files" Factory reset problem Windows 8

  Hello

  So I just bought an ASUS renovated online - zenbook that came pre-installed with Windows 8. There is some unnecessary programs from ASUS on it and the computer worked quite slowly, so I'm trying to do a factory reset, but when I try, I always get the message "Unable to find the necessary files" and then it asks me to insert the installation disk or media, but I don't have one of those. I tried to go to the command prompt and doing reagentc/Enable, but every time I try I get the message "Windows RE image is not found." Then... I don't know what to do and really need help.

  Thank you

  Hello

  I understand the inconvenience caused to you.

  To remove unnecessary programs provided by ASUS, you can uninstall programs and features.

  Here is the link for more information.

  http://Windows.Microsoft.com/en-CA/Windows-8/uninstall-change-program

  If you reset the PC, all your PC applications will be reinstalled. So, I wish that you contact the ASUS support for assistance to eliminate programs and get the recovery disk to perform the Reset if you want to do it again.

  ASUS also provides the partition recovery for certain laptop models, you can check with them and try to reset the score itself.

  Hope this information helps. If you have any other questions about Windows, please let us know.

• Re: Satellite T130 - 11H - Factory Reset questions

  Hello

  I had to reset my Satellite T130 - 11 H to factory settings to try to stop the issues with my internet and computer in very slow summer and unresponsive, but now when it starts it states that it is "complete the installation may take several minutes" then restarts on its own starts again, then restart again and again!

  Now it is tell ing, the same message but just hangs and does not go on my counter top?

  Help

  Thank you

  Hello

  I know during a recovery procedure you laptop will restart several times. So, don't interrupt and wait. If it restarts always for a long time, you can restore the settings to factory using recovery media, you did

• Cannot perform factory reset to Satellite L650

  Hi team, support

  Hope you will be well :)
  I have some problems and hope that you will help me solve them. Here is the description of my problem:
  I have a Toshiba Satellite L650 - 17R laptop computer I want to reset to the factory settings. I used the following instructions to do that (http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm), but when I'm in pressing the F8 key when starting laptop it appears a list of choices on the display that does not contain 'Repair your computer' or "??" or something like that. The first entry in this list is 'Safe Mode', second is 'Safe Mode with Networking' and so on. Also, I tried the other method described in many places in the internet, which is to press 0 and the whole power button when you turn on the laptop. In this case again, he starts to do things as described in the instructions (example here http://www.youtube.com/watch?v=I5dEOm1EJBw): it beeps, then when I let go of the 0 key, it prints "starting Windows" and shows the Windows logo, after that it goes to market as always and no other dialog boxes appear.

  Issues related to the:
  Is there another way to do the factory reset?
  I have doubts that the "Toshiba HDD recovery" tool of my laptop is corrupted, so is it possible to download this tool on the internet, on dvd disc and install from there? If so, then can you please give me a link of this tool for my model?

  Best regards
  Mihran grabbed.

  Hello Mihran and welcome in the Toshiba forum

  Let's see what's not there.
  First some general info. Each new Toshiba notebook is preinstalled with original recovery image. This image is also saved on the HARD disk on a separate partition. With the factory settings repair my computer option will appear in the advanced start-up (F8 at startup) and HARD drive recovery option can be made as described in Toshiba document you posted in your first assignment. If nothing is changed, this option will be there and you will be able to do the installation of HARD drive recovery again ad again.
  > when I'm in pressing the F8 key when starting laptop it appears a list of choices on the display that does not contain "repair your computer".
  This occurs if you have installed the version of the OS using the Microsoft installation disc. After having this option to fix my computer will disappear, and you will not be able to start the installation of HARD drive recovery.
  > Is there another way to do the factory reset?
  Yes. You must use the disk for the installation of the OS restore DVD. After that it all will be the same. Repair my computer option will be available again and you won't be havce factory again.

  If you have any other questions you are welcome.

• Re: How to reset Satellite P200-12V in factory State?

  Hello

  I need help to reset my computer (Satellite P200-12V) in factory State.

  After turning on my computer, I get "blue screens of death" after a few minutes.
  I tried to download the drivers, where it was due to a bad, but the problem remains.
  The only solution that I can choose is therefore now put in shape the HD and restore the original soft Toshiba and OS (Vista), that is, from what I know, in a hidden partition.

  I tried F8 but I have in the dropdown menu, I don t get no option for this (I wonder just to use my system CD, and of course, I have not...).

  Is there one plan other than the F8?
  Please, what can I do now?

  Thanks for your help
  Mike

  Hello Mike

  Some old notebooks as your P200 were shipped with and some without recovery DVDs. notebooks shipped without DVD recovery media had saved from a recovery image on the second partition of HARD drive in the folder called HDDRecovery was not a hidden partition. It was visible in Windows Explorer.

  If your laptop has been delivered without DVD you had the ability to create this disc using Toshiba recovery disc creator pre-installed recovery. I assume that you didn't create, right?

  If you can't see the option repair my computer start-up advanced options (F8 at startup) that there is no way to launch the installation of HARD drive recovery.
  > Is there any procedure except F8?
  Yes. Use of DVD recovery, but of course you don t have it.

  Is it possible that you get the original installation disc for Microsoft?

• How to get factory reset disks for Satellite Pro L40?

  Hi all

  Ive got someone other Toshiba Satellite Pro L40 attempt to fix, it got a virus, and the best way to solve this problem is to do a factory reset, so I copied all the personal files on DVD and went to do a factory reset, but told me that I need the discs...

  But apparently, this laptop was given as a replacement by an insurance company, and no records were provided, then how to to get the disks?

  Thank you
  Angus

  Hello

  Not sure if you will be able to order this disc from this page:
  https://backupmedia.Toshiba.EU/landing.aspx

  Sometimes these disks cannot be ordered if the notebook series would be dropped.
  In any case, check out the page and try

  It may be possible to order this disc

• Satellite L750D and factory reset - HDMI still doesn't work do not

  Satellite L750D
  psk361 - 038008
  9b341741w

  My hdmi suddenly stopped working, tried things usual fn + f5 / f8, win + p key, enable / disable lower resolution etc. so decided to factory reset but still pc hdmi does not graphics card.

  tried it on my panasonic usual tv nothing works, tested on samsung tv without result, the pc detects the tv and even sets the audio to my TV but no sound from the tv. tried unplugging tv cable and pc stop feeding and took out the battery for 10 sec, trendy everythign on all together, still does not work.

  I checked the hdmi cables with other devices and work on the two TV - using the shortest cable to test the laptop.
  honestly, I thought that it was a software problem because it can real detects the TV but no picture or sound work, which indicated the hdmi cables, but they work with my ps3.

  so, it is not the cable, not the TV, not the software, hardware maybe? but it detects my TV...?

  so I am really confused here more info please ask first time using the help forum :(

  8mnth old pc, who is sitting on a rail so it is not at all, overheating hdmi worked perfectly since the day I got it, I didn't have any changes when it has stopped working... > _

  any help much appreciated sincerely.

  Hello

  If all goes well he material s no problem, but I m afraid it could be
  I think it might be a hardware problem, because you said that you have already configured the laptop back to factory settings and this has not solved the problem.

  I understand this correctly? You used the recovery disc or HARD drive recovery?
  Is this good?

  What you could do is to check if your BIOS is up to date.
  On the European driver Toshiba page, you will find the latest version of the BIOS.
  Check if you can update the BIOS.
  In addition, I recommend setting the BIOS to default and settings to save the changes.

  At least a graphics card driver might be updated also. Its worth a check however, I m really not sure if this might help you

• Problems with factory reset on a Packard Bell

  Hi cox.haley1,

  After a Microsoft update Tuesday May 13 laptop Packard Bell Easynote TK85-GN-051UK of my granddaughter had a huge problem with the start-up that could only be ordered with a Factory Reset. Finally I had all this work and re-installed all software programs. Several days later, after update of Microsoft more, another problem arose that could only be fixed again with a Factory Reset, so I had some things to begin to repair, but it got stuck in the Installation of the software... Install Office 2010...33/45

  18hrs. later he was still stuck there.

  I sent to Packard Bell for re-installing operating system Windows 7 DVD & utilities drivers & Applications DVD... Incl. postage. £37.

  They have not worked as once more stuck in the same place.

  Packard Bell is a Dutch manufacturer and a subsidiary of Acer will help so I don't need to waste money on recovery discs.

  Can anyone suggest something to help please?

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/Windows-cannot-complete-installation-in-safe-mode/5e913a56-B29B-4386-A462-20e1991a1edc#LastReply

  Thank you. All sorted now. There is a corruption of Microsoft Office files. Formatting of hard disk. Re-installed my Windows 7, etc and then all software, updates everything and now all is well again.

• Factory reset wireless router connection problems?

  Hello

  I recently did a factory reset on my HP6745f desktop running Win7 sp1 and I don't know if my problem is with HP or Linksys/Cisco (my router). I already contacted the support Cisco who reported the problem seems to be "a matter of HP, a corrupt driver or other third-party issue" and then offered to help, for a price. I'm hoping to avoid that if possible.

  This office computer is directly connected to the router via an Ethernet cable. Cisco software was that I want to install that 'control' of my router (called Cisco Connect) and when I try to install the software, I get a message saying: "We could not find your router" (that's why the software will not install) - although I am accessing internet through that router. Even if I try to enter my network name and the password, it cannot find anything. I am also unable to access the router via my browser "168.198.1.1".

  I am unable to connect wireless with the same desktop so, my 2 wireless laptops have no problem of connection at all, which leads me to believe it's something specific to my desktop pc.

  The Cisco Connect software has already been installed on my desktop and it worked fine. I guess my question is: someone has any suggestions for me? This could be a driver problem? How can I identify what (s) for 'check '?

  Any help would be greatly appreciated.

  I thought about it! My router can use a "network key" to connect other computers to the router. I guess when I reset my pc all this info has been removed and the router could not communicate.

  I have just created a network key on a flashdrive USB of my laptop, plugged the USB in my office and hop, I reconnected properly. Thanks for the suggestions, I really appreciate the help.

• Audio problem on Satellite T130

  Hello

  I'm having a problem with my Satellite T130-11U.
  When I try to watch a video, I can hear the music and other sounds, but not the voice of various characters. I have already installed the official drivers, what can I do?

  Thank you

  What types of video files you watch when this happen?
  Videos on YouTube, self made video movies, avi/mpeg files or something?

• problems printing e-Studio 160 / factory reset

  Hello

  I have a multifunction Toshiba Copier e-Studio 160. After trying to connect to an office network and off it, I lost the settings I had set up on my Copier. Now whenever I use the copier I get "cut" copies; I mean that the copies printed by the e-Studio160 do not include all of the original.

  Does anyone know how I can set up border printing or how do I do a reset?

  Thank you very much.

  I see that no one was able to provide a solution to your printing problem.

  I found e-Studio 160 manuals (manual Local and network operator)
  http://www.Eid.Toshiba.com.au/n_manuals16-160-20-200-25-250.asp

  I recommend you to consult these documents. Probably you will find the details in these documents how to print borders, or how to do a factory reset