Satellite T130 PST3AA-03F02M - 3G MODEM DOES NOT DETECT

Similar Questions

• Satellite A200 - 1 GB: my modem does not work - remote computer is not responding

  My A200 - 1 GB modem does not work correctly. It tries to connect, but at last he said computer remote does not respond. As I noticed it has a modem 56kpbs of "I agree."
  It is shown as Toshiba Software Modem.

  I tried so many times it does not work properly.
  I tried changing the COM ports assigned to several other ports like COM1, COM10 COM, COM 4 ext... same thing happens.

  When I diagnose the modem via the properties of the modem without issues considered.
  Even when I'm component via the modem to a telephone line (I mean as a call) it works fine.
  I mean that he can call on a mobile phone or phone of the Earth.

  A few times he suddnely connects but connected sppedis 24kpbs.

  But the same phone line works correctly with my modem office both as the same as another modem from the laptop.

  It seems that there is a fault on my modem 56 k.
  I tried even uninstall and reinstall, but the issue still exists.

  Can someone help me in this case?

  Hello

  I don t think that the modem would be malfunctions.
  Fact is that if you use the wrong modem configuration, the line may be busy and the modem would not answer.

  I recommend you configure the modem again.
  In programs-> Toshiba-> Networking, you would find the Modem region Select utility that must be configured for the same country.
  Delete the existing profile and create a new!

  Best regards and good luck

• Satellite A30, Win XP Pro SP3 - modem does not work

  Another problem with this laptop Satellite A30
  The built-in modem does not work.

  * Explanation: *.
  The driver is correct and downloaded from the Toshiba support site.
  The modem is identified as "Toshiba software modem amr" and is installed on com3 port.

  When I click on "diagnosis" and "ask modem" (right labels can be different, since my is an Italian win xp, I just translated the Italian labels), a window pops up saying: it is impossible to open the door (port), the modem is connected to.

  I tried to change the com port of the modem to different numbers, but the problem is the same.
  I don't know if the modem is a real map connected somehow to the main Board or is built right on the main map. It would be the first case, I may change see ad. BTW, the mini slot pci is already occupied by the gigabyte of Wi - Fi, so the modem must be elsewhere.

  This is strange, since I've done at least 2 other win xp pro on this machine facilities, always download and install the appropriate drivers, and the modem has never worked.
  Thank you
  S.

  Hello

  Have you installed the SP3 Windows XP Home edition, then the drivers or SP1 and later updated to level to the SP3 version?
  > It's strange, because I did it at least 2 other facilities on this machine pro win xp
  What other facilities?

• Satellite A30-504 modem does not

  Hi all

  Old old old Satellite A30 504 my father had problems of modem for quite awhile. Here are the symptoms exposed:

  Modem is recognized as "TOSHIBA Software Modem AMR" and classified works correctly. However, when you query the modem, I get the following message:

  + The port that the modem is attached could not be opened. This can be the result of a hardware conflict. Check the Device Manager to verify that all devices are functional. +

  Settings of resources:
  Range of e/s-2400-24FF
  E/s series 2000-207F
  IRQ 7
  (I can't change any of these settings)

  Needless to say that the modem does not work.

  Has anyone ever met such a problem before? Does anyone know of a way to fix this? I really don't want to get a PCMCIA modem for this laptop, so any help would be greatly appreciated.

  Thank you in advance!

  Dan

  > I have reinstalled Windows XP twice
  How? Do you use the restore disc Toshiba for the installation of Windows XP Home edition?

• Satellite Pro A10 - Modem does not

  I recently reformatted my laptop using recovery discs. The internal modem does not work. It is recognized by the computer, but I get the message "the port that the modem is attacahed to could not be opened." This can be the result of a hardware conflict"when I query the modem in Device Manager. Also, in the Device Manager there is no indication of being recognized COM port. What can I do?

  Hello

  First I recommend you remove the modem from Device Manager, and then reinstall the modem driver.
  It is not necessary to assign any COM ports manually. After installation of the modem driver all have to be configured automatically. Do not forget that you are using the modem driver good for the country where you live.

• Cannot install Win 8 - Satellite Pro C660 does not detect HARD drive

  Hello

  My HARD drive died, so I decided to upgrade my Satellite Pro C660 - 1 9 to an SSD.
  I made a USB bootable with Win8 and starts very well.

  The problem is that it does not detect my SSD, so I can proceed with the installation.
  SSD appears in BIOS but not in Windows Installer.
  He said that there is a missing driver.

  I downloaded the AHCI drivers (XP, only ones available) and even in this case, after you have selected the only rider that appears, it says no new device found.

  I tried to change the SATA from AHCI mode to compatibility mode and it's the same thing...

  What can I do?

  Thanks for the help.
  Best regards
  Bruno Moreira

  More old Windows XP need a driver AHCI Intel's but I think this isn't a problem with SATA driver missing because as far as I know Windows 8 as well as Win 8.1 already contains the drivers to recognize the SSD or HARD disk drive.
  In addition, the installation of the OS should be possible even if the driver would be added for this procedure, you must use the "compatibility" mode
  As you say, the compatibility mode is not working too, so I think there is another problem.

  However, page driver Toshiba also provides a driver Intel RST (Intel Rapid Storage Technology) (Windows 8 - updated) you can try to add during the installation of the OS.

  But I m wondering if you would be able to install this Win 8 on common SATA HDD.
  Have you tried to format the SSD using a different computer, then install Win 8?
  Give it a try.

• Portege R400-103 - 3 G internal modem does not

  Hello

  I have several problems with my 3g modem. Even if everything looks well installed, the modem does not respond. In addition the hibernation, sleep and shutdown cause in an accident.

  Portege R400-103
  -Windows 7 Professional

  * About sleep/wake extended/dhutting down: *.
  When I disable devices that are bound to the modem 3g, this all works, so my conclusion is that this has something to do with the 3g device.

  On the modem does not: *.
  When I go to the properties of the modem, and I ask for a diagnosis (modem to send information on the State of request) a box arrives with a message that the modem has failed. The modem worked, and frankly I don't know what crazy it has stopped working.

  Maybe you guys need more specific information. Please let me know.

  Any help appreciated.

  Hello

  Just a question at the beginning: is your laptop preinstalled with original OS that you got with your laptop Portege?

• Satellite Pro 6100: modem is not detected

  Hello

  Windows XP does not detect my modem.

  Driver downloaded from the toshiba Web site, instaled it and still not found modem.

  Any ideas?

  Thank you

  Hello

  In my opinion, there is hardware failure. The best way is to contact the Service of your country partner. They allow to check the unit. For the moment, you can try using an external modem. I don't know that one of your friends can borrow you a.

  Visit the Toshiba page under http://eu.computers.toshiba-europe.com. Click Download & support and you will find a link to the list of service partners.

  Good bye

• Satellite A500-19W does not detect battery

  Hello

  I have a portable Satellite A500-19W which is 6 months old.

  I bought this laptop while I was in Egypt and now I've moved (Dubai) UNITED Arab Emirates.

  Lately my laptop started suddenly does not detect battery.

  To remedy this that I have to remove the battery and clean the terminals then re - put the battery and turn it on and it's OK.

  This happened twice this week and caused my data loss because the charger is disconnected (if the charger is connected, the laptop computer continue to work, but the battery indicator does not light up)

  Now, my questions are the following
  1 - is this problem under warranty?
  2 - should I pay for anything when getting this laptop in service in Dubai noting that I bought in Egypt?
  3. is there a cure for this problem without going through the service center?

  Thank you

  1 / Yes. These questions should be covered by the warranty. Material is junk.

  2 / the nearest service contact and ask, but I'm sure you don't have to pay for the repair. The two countries are countries in EMEA, and avoid any kind of problems.

  3 / it is not much, you can do about it so please contact and explain the situation. They should check your laptop and find a reason why this happens.

  Don t waste your time and contact the closest service. If you have need for addresses and phone numbers you can find on http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

• Re: Hitachi Drive Fitness Test (DFT) does not detect the HDD on Satellite A660

  I have a Toshiba Satellite A660 PSAW3C-047017 with a HARD MK6465GSX Toshiba drive. After experience, some consecutive failures of start-up, I was told on the Toshiba forums to use Drive Fitness Test (DFT of Hitachi).

  I burned the ISO to a CD and booted from it (I must press F12 for boot options and select the optical drive), which is to run successfully. However, it does not detect my drive HARD - the list is empty.

  Is there something I need to do to make visit to DFT?

  I cannot commend this third part software features, but I want to know if you still have these failures to start your portable computer satellite?

  What's the problem?

• Portege M200 does not detect the Modem PCMCIA card

  I have the Portege M200, when I insert a PCMCIA card (LAN or wireless) the pc detects it ok but if I insert a modem PCMCIA ANY, as a standard 56 k modem, modem card v620 air verizon or a sierra wireless aircard 710, the pc does not detect any, nothing happens when I put it in or out.

  V620 Verizon is the card that I have to make it work as soon as POSSIBLE, others, I used for the test, it seems that modems do not work for some reason any on the PCMCIA.

  any help?

  If the WLAN card manufacturer supplied driver with this card please read manual how to install it on the right track. It is possible that the driver must be installed first.

  Sorry, but my opinion on the laptop PCMCIA port is OK and if you need support try to contact the manufacturer of the card. They should have enough experience with own products.

• Tecra M1 - Modem does not work (could not open a port)

  I have a problem: after you have reinstalled Windows XP and on my Tecra M1 drivers, modem does not work. It can not diagnose himself - he always comes a warning: "cannot open a port (COM). It can be used by another device or application. I installed the latest Toshiba drivers for the modem, but nothing changes. How can I solve this problem? Looking forward for your advice!
  Best regards.

  Hello

  Have you installed the drivers in the correct order? Not? So do it!
  Have you installed the software or additional devices which could have a bad influence on the modem?
  Check the status of the modem in Device Manager. You don't see any yellow exclamation?

  Try to start the test on the modem within the operating system.
  Check the operation of the Modem under
  Start-> Control Panel-> phone and Modem Options-> Modems tab-> properties-> Diagnostics
  by pressing the 'button interrogate Modem.

  If the information window about the Modem contains a list of COMMANDS (including ATI2, ATI3, ATI4 etc.), then the modem is installed correctly. The ATI5 command ends with the number for the parameters selected regional (for example Germany = 06).
  To change the regional setting please use the Toshiba Internal Modem region Select utility.

• Satellite A300-24Z - windows does not detect connected sata hdd

  Hello

  Ago that I bought the new laptop Toshiba Satellite A300. A few days ago, I decided to plug in my old laptop HARD drive - drive is Toshiba MK1234GSX - my new laptop via sata to esata cable. Problem is that windows does not detect a new device, by itself, nor in the Device Manager. Is it possible to do this drive works?

  Thanks for help.

  Hello

  Have you tested other drives?
  This should be checked!

  Please go to BIOS and adjust the default BIOS by pressing F9 button in the BIOS settings.
  Save the changes, and then try again

• Satellite L50 - after Win10 touchpad upgrade does not

  Brand-new Satellite L50-C03E laptop pad touch does not work. Upgrade to Windows 10. Tried using all combinations of F5, FN & F5, don't hit to swipe and checking settings and nothing works.

  I guess you can use external USB mouse.
  Connect it to the laptop and uninstall the old touchpad software / driver for Windows 10 system. You should find it in Control Panel → programs and features.

  After the the touchpad driver has been removed, restart the laptop and win 10 updates.

  It would be very interesting to know if this solution allows you to get the touchpad working again.

• Satellite Pro L300: DVD drive eject does not & recognizes not all disks

  Satellite Pro L300 dvd player eject does not and does not recognize the disc that sits in.

  Please help someone,

  Thank you very much.

  What kind of help do you expect?

  You mean he s a software problem?

  I doubt it because it sounds like a mechanical hardware problem and in this case, the disk must be replaced.

  The laptop seems to be is not very old, and I think that the guarantee must be valid
  How about you, communicating with ASP in your country and ask for a replacement WEIRD?

  I think this helps