Satellite T135 - update BIOS 2.70 won't be finished

Similar Questions

• Satellite L750D - update BIOS 2.1 and its problem

  Hello

  I have little problem. I was downloaded from your website 2.1 BIOS for Toshiba Satellite L750D (PSK32E).

  I have been updating BIOS 2.1 and start the problem with the sound. When I start the game, music or else minutes 2 first sound plays correctly but then it stops without reason. No noise at all. I've been reinstalled op system but the problem is still there.

  Sound works for 2 minutes only then is completely off. Each application to start with sound plays 2 minutes and stop all silent is. I did a probe on my laptop the mother she s a computer portable twin. I have updated bios same problem 2 minutes and then no sound. My OS is win 8 64 pro my laptop mother is with win 7 x 64 premium.

  Two BIOS updated ver 2.1 on L750D and the problem is the same. Please fix the BIOS.

  The BIOS seems to be very old. I was released nearly 1.5 years ago, so to be honest, I doubt that his and BIOS problem.

  I had the similar problem with my other laptop equipped with a Realtek sound card.
  The sound appeared after connection and remove the headphone jack
  But I could solve this latest installation updated audio driver the Realtek driver page.

  But it seems that your Satellite does not support Realtek audio chip but the Conexant audio chip.
  Therefore, the solution could not be useful for you.

  However, I think that you need to update the audio driver. I recommend you google for driver Conexant SmartAudio HD and test the latest version of the driver available.
  On the internet, I find the Conexant SmartAudio HD driver version 8.65.9.51 for Win 7 / 8 Win / Win 8.1
  Not quite sure if this is the latest version, but you can test it.

  To manually update your driver:

  1. go into the Device Manager (right click on my computer, choose manage and then find Device Manager in the left panel)
  2. right click on the device you want to update and choose Update driver software
  3. choose Select the location of the new driver manually and navigate to the folder where you downloaded the driver

• Satellite L350 updated Bios to pad 2.1 and lost

  Hello

  As indicated above for the update Bios to 2.1 later I lost the functionality of numeric keypad, not the right side as if it were a good keyboard.
  The above keys work IE delete scroll etc.

  The numlock light does not illuminate, but it does if I activate the keys on the stretch main qwerrty.
  Is their any way to reload the bios it won't let me because I have the latest or downgrade may not be like that until anothrer update.

  By the wy am Windows 7 any info would be greatly apreciated thanks

  Hello

  Normally you press Numlock on the keyboard to enable it.
  Check this box!

  If it s not working do not you should load the default settings in the BIOS. Maybe it works.

  Last but not least just be sure it s not a hardware problem, can test you it with the factory settings?

• Satellite A300 - update BIOS 1.70 - WIN

  Update BIOS 1, 70-VICTORY-28/04/09
  Once again the same thing?...

  PSAG8E A300

  Hello!

  Can you please explain what you want?
  Once again the same thing? What you mean?

  Good bye

• Satellite A500 - update BIOS with dead battery

  Hi all

  I have a Satellite A500 (PSAR3E) laptop and I need to update the BIOS to the latest version.
  Unfortunately, my battery died completely, and I have no chance to get a working one.

  I was trying to update the bios all day, but no matter how I try (even created a boot back drive and took command line phlash16, /forceit and so on) it keeps telling me that he needs at least 10% charged battery present.

  How can this problem be solved?

  > If I remove the battery, engine update fails, say there is no battery present, if I fix the battery, then update will fail saying the battery must be at least 10% - but he died, this percentage is 0.
  And you write about original Win version that you have downloaded from the Toshiba BIOS download page and started in Windows?

  To be honest is unclear to me that there is a trick to avoid this situation.
  Maybe something stupid, but now, do you really need to install the update to the BIOS?
  Is there a problem with your machine?

• Satellite C660 - update BIOS stops on: project ID check failed

  Update 1.4 stops on: project ID check failed. I have the Satellite C660, BIOS 1.0 version.

  Thahx for help.

  Can you post more information please?

  What model of laptop you have exactly (C6660-xxx)?
  Are you using the original operating system preinstalled that you got with your laptop?

• Satellite L500D - update BIOS, covered by warranty?

  Hi, I bought a Satellite L500D in September of last year. The weekend comes, he suggested I should keep the machine etc. updated drivers so I logged on the Toshiba web site and there was a link with * New * Bios Update, i.e. After choosing the etc. good model from the dropdown boxes.

  The update seemed to work however when the machine is re-start, he went through the boot process closed however it has not started up.

  I tried to choose the boot in SafeMode etc and tried to reinstall the backup CD, but I can't get the machine to start. I have now put the machine in to authorized service center for Toshiba to fix.

  As I followed the instructions on the web site of Toshiba is that this should be covered by the warranty?

  Thank you

  Hello

  No, the update of the BIOS is not covered by warranty! This update happens on your own risk, and you can find this information on Toshiba Web site e too.

  I quote the Toshiba page:
  + Toshiba provides this information "such what ' without warranty of any kind, express or implied, including, but not limited to, the implied warranties of quality market or adequacy has a particular use. Toshiba shall not be liable to the topicality, accuracy, completeness or quality of the information provided. Toshiba is not responsible for damage caused by the use of any information provided, including incomplete or incorrect information. +

• Satellite A30 - update BIOS cannot access bios and no light to full charge

  Hello

  Like a fool I upgraded my bios (to 1.80) for Satellite A30 (PSA30E). I've noticed two problems.

  (a) during start-up I no longer get any what welcome screen and can not access the bios or boot from other devices - so if I want to boot from the CD now I can not - for example impossible to reinstall the operating system in the future

  (b) the battery suddenly was not fully charged and constantly hangs on 99% (apparently)

  (c) who knows what else could go wrong

  I'd like to undo what I've done, but it does not seem possible. How the hell can I solve it, since clearly the update of the bios is incorrect. Find a bios update file earlier (and how to use it)? Can I fix it?

  Someone at - it ideas?

  David

  Hello

  First may to ask why you have updated the BIOS. If everything works, the update of the BIOS is not necessary.

  OK, how have you tried to access the BIOS? Usually the F2 key must be pressed immediately after starting the laptop. You can try to press several times.

  But you can start from STRANGE on different ways. You can press C button and the specifications will enable booting from the drive or you press F12 and you choose the STRANGE as a source of start-up.

  I put t know why the power of the battery freezes at 99%, but you can try to remove the battery and wait several times. Then reconnect and check the status of the battery.

• Satellite L750D - update BIOS causing the CD Player problems

  I have a L750D-1GC Satellite running Windows 7. Recently I updated the BIOS to 1.60 04/05/12 THIS worm 1.40

  I noticed that since that more that I have problems my CD player in what I can read CD/DVD but does not burn. Using burning software, it appears the combustion happens (rotation of the disk and green light), but at the end it breaks down. I have tried several Microsoft Fixit program but the problem persists, help?

  I put t think that the BIOS update would impact on the functionality of CD/DVD drive.
  Usually, the firmware of the CD/DVD drive contains information about the compatible media and I put t that any link between this question and the previous update of the BIOS.

  For me is looks like the laser lens is dirty or the lens may not be properly calibrated to read/write from the disk
  Try to clean the laser lens with cotton wool trick and liquid alcohol in many cases this would set similar question and the player couldn't handle the media properly.

• Satellite A500: update BIOS V1.50 is fan noise problem reappears

  I have a Toshiba Satellite A500 with fan noise problem.
  It has been partially resolved the upgrade of BIOS from v1.20 to v1.30, according to this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=46719&start=0&TSTART=0
  

  Yesterday I updated the BIOS v1.50, and the sound of the fan returned.
  I do not recommend this upgrade if you have had the problem of fan noise.
  

  I have downgrade BIOS v1.30 and fan noise problem is solved again.
  I know that people have problems to get the downgrade to BIOS, so I describe the process in this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=50577&TSTART=0

  Thanks mate for sharing this with us

  But perhaps you could use the v1.5 BIOS and could reduce or reduce the activity of module cooling in Vista/Win7 power management settings.
  It would be interesting to check it out

  In any case thank you for this info

• Satellite A100 - update BIOS problem with phlashnt.sys and Vista 64

  I downloaded the upgrade of BIOS (file S10V600.exe) for my Toshiba Satellite A100-437 (PSAA8). When I try to launch it I get the answer:
  "Unable to load driver.
  ... \PHLASHNT. SYS
  ...
  This driver has been blocked form load.
  Error code: 1275 "
  (I rolled points instead of less interesting part of this message.

  My system is Vista Business 64 - bit SP1.

  I turned off User Account Control (in fact it the first thing I did after installing Vista ;)).
  And just to be safe, I also tried to right click on the S10V600.exe file and choose "Run as Administrator".
  I was using the admin account.

  Nothing did. Always the same window with the above message appeared.

  Any help would be appreciated!

  Concerning

  Maybe it's because you have installed Vista 64-bit?

  You may need to use XP or Vista 32 bit update of the BIOS.

• Satellite M30 - update BIOS

  Help, how do my satellite M30 BIOS?

  The procedure described by toshiba, indicates it takes to copy the update diskette 1.44 ", but the PC does not support this drive... !

  How do I?

  (i)

  As far as I know every Toshiba laptop supports external USB FDD. Do you have a?

  In any case, I checked the Toshiba BIOS download page and there is a BIOS update available. This is the version 1.70 and this is the version of WIN. WIN version means that it can be started under an operating system and you don't need a floppy drive.

  What version of BIOS you have now?

• 2180 satellite CDT: update BIOS issue

  I have an old Satellite 2180 CDT and a message saying "ready for the update of the BIOS. Please insert a disc of the BIOS update... "appears when I turn on the computer.

  I downloaded the update to the correct BIOS to floppy and follow the instructions of Toshiba.
  When I insert the disk and press a key.
  the disk starts for a second, but stops and starts again. It continues, and at the same time, the laptop emits a short beep every time the hard drive begins.
  Light flashing for the floppy green.

  I'll be very grateful for any help. I don't often use the computer, but it has some important information on this subject...).

  Hello

  Can you please tell what wrong because I s t see any problems.
  The fact is that you can hear a beeping sound during the BIOS update procedure.
  Did you get the error messages or something like that?

  Maybe this document of the BIOS update will help you:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=EU&FID=TRO0000000b07

• Satellite C660 - Updata BIOS failed

  After bios updata my satellite c660 starts do not and receive short message beep one long beep and 2 beep
  the screen is black
  How do I reinstal of the bios in this State
  Thanks for the reply

  I'm afraid that the BIOS is screwed now. I don't know what BIOS and how you installed, but something is wrong.

  I don't know what you can do now, but check this thread - please https://forum.toshiba.eu/showthread.php?54395

  Following the instructions here, maybe you'll be able to fix the BIOS.

• Satellite L675 - update BIOS crash

  I tried to do a bios update, he started and all of a sudden crash of pc.
  Then I press the button to open it again, but nothing is only blank screen and stop, nothing to do?

  You now big problem. Obviously, the BIOS is screwed now, and in this case only authorized service provider can assist you with this.
  What you can do is check this wire and try to follow the described advice he. Maybe you'll be lucky and bring your laptop to work again.

  Check it out.