Satellite T135D-S1324 recovery deleted partition

Similar Questions

• Satellite T135D-S1324 - no support for USB boot

  Hello.

  I buy this model (TOSHIBA SATELLITE T135D-S1324), I am a linux user, this model comes with ligthscribe player, I want install ubuntu on USB but to my surprise I discovered that there is no option for USB boot in the BIOS config.

  Anyone know of a solution for this problem?

  There's a kind of an UPDATE of the BIOS to activate the USB BOOT?

  Thank you.

  Post edited by: idposada

  Hello

  Usb drive before plug to turn your laptop and the Bios must recognize.

• Satellite Pro R850 - 15 H - recovery deleted partition

  My brother was playing with my phone, apparently accidentally deleted partitions on my HDD recovery so that I can not install them the system now. What should I do?

  Now, you have two options:
  1 / you can order the original recovery image for your model of laptop on https://backupmedia.toshiba.eu/landing.aspx

  2 / you can install the version of the OS. All the necessary drivers, tools and utilities, you can download it from http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  If you have any other questions you are welcome.

• Satellite T135D-S1324 - Skype and webcam internal - DirectX problem

  HI AGAIN.

  I have a s1324-toshiba satellite t135d, with windos 7 home premiun, I install Skype 4.2 for windows but the webcam is not working.
  It shows me a message: check the installation of DirectX, I'm sure that I installed the latest version of DirectX, for example, with MSN Messenger the webcam work very well, the work of software reconicton face too.

  The only problem is with the Skype webcam feature.

  Anyone know what happened?

  Thank you.

  Hello

  > It shows me a message: check the DirectX installation, I'm sure that I installed the latest version of DirectX

  try to install it as Skype invites :) Also, try to play with the video settings in Skype

• F2C49PA #AB4: recovery deleted partition

  partition recovery deleted it by mistake how can I original recovery image

  Prasanna-pc

  Ordinarily, I advise to use HP recovery media to restore your PC to its original state. That would erase the entire disk, format the drive and install the operating system, drivers and utilities HP.
  
  Unfortunately, there is no support of HP recovery related to HP for your PC Product Page.  This could be an oversight by HP, or it could also mean that HP stock is no longer the recovery media for your PC. They store any long recovery media for older PCs.
  
  You can try to contact the HP customer directly, using the links below, to see if you can order them if:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!
  
  If HP no longer provides a recovery media for your model, a few other sites, you should check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• Satellite T135D-S1324 - where can I find a replacement screen?

  Well, I don't know how, but my new laptop (buy 50 days in best buy when I travel to Los Angeles) has a broken screen. It seems that he has been hit by something, but I NEVER hit him with anything.

  The excellent work of the laptop but it is very painful to see all broken lines in the screen, but I hope that I have fly can use and work very well.

  My main concern is that I can't FIND ANY LED BACKLIGHT SCREEN 13.3 of TRUE HD, I'm of the Argentina, and here, they only replacement lcd screen. A friend told me that he can buy the replacement in the Amazon but I can't find screen replacement Toshiba led (only from hp)

  Anyone know where to find replacement screen for this notebook?
  or if all the screen works in my toshiba? http://www.Amazon.com/s/ref=nb_sb_noss?URL=search-alias%3Daps&field-keywords=replace+led+screen+13.3&x=0&y=0

  THANKS A LOT :)

  Hey,.

  To be honest, I also don t know if another screen replacement would work

  AFAIK T135D-S1324 is for the American market, then you should contact the guys there. Maybe they can send you a screen replacement or something else. Simply contact the guys.

  Laptop parts are specific designed for a laptop series you should buy a replacement of an official authorized service provider.

• Satellite L300D - Recovery deleted Partition

  Hi all

  I am a fool and deleted the partition recovery on my Satellite L300D.

  I have an installation of WinVista disc, and I found what I thought, were the SATA drivers, loads them in the course of installing Windows - no go.

  Can someone point me to a DL for a recovery disc or the correct drivers to install during the installation of Windows right?

  Any help would be great appreciated!

  > Can anyone point me to a DL for a recovery...
  I put t know what DL, but what I write here is followed by: original recovery image is not downloadable, and if you have the original disk recovery Toshiba for your machine, you must order it under https://backupmedia.toshiba.eu/landing.aspx

  If you want to install own os version, what do you think on Win7?
  I mean I installed Win7 32 bit on friends L300 and it works perfectly.

• Tablet Toshiba WT - recovery deleted partition

  Hello

  I had problem with Windows 8.1, so I tried to update the system, but I couldn't do it and then I tried to get my tablet to the factory setting and what surprised me that now my Tablet have partition and I don't see that "No bootable device - please reboot the system".

  So I guess I deleted my windows 8.1 my Tablet :( How can I fix itn how can I install windows again?

  Please help me!

  If you have deleted the recovery 8.1 of the Tablet Windows partition, you will not be able to use HARD drive recovery option. In this case, you must order the recovery of the Toshiba Arvato service media: http://backupmedia.toshiba.eu/landing.aspx

  Here is also very interesting paper describing the procedure how to recover the Toshiba tablet from recovery media
  http://APS2.toshiba-tro.de/KB0/HTD4103K90000R01.htm

• HP Pavilion DV6 3122TX recovery deleted partition, need to install windows

  Hello
   
  I have a Pavilion DV6 3122TX laptop. System would block extensively when I ever access any file, was not a virus or whatever it is, I discovered it was the HD due to the error at startup screen "error of hard disk, hard drive 1 (3F1)", I ran all the auto controls and diagnostics but nothing improved. So I formatted the disc completely deleted all partitions even recoveries and other (my bad).

  My recovery disc can not be read by the laptop DVDRom Red flashes for a few seconds and then nothing happens, "said no system disk. Replace the disk and then pres any key blah blah blah... "The drive is fine I checked. I changed the boot options to boot from a CD/DVD internal.

  I need as soon as possible a working windows as a temporary solution. I can't install Windows 7, it seems because of some lock (turns on it was unable to detect the HARD drive). Windows XP cannot see the player because of the requirement of AHCI driver (cannot switch back to IDE) due to the lock of the BIOS. Then I tried the method of slipstream AHCI driver, now, here's my problem I just can't find the AHCI drivers for my laptop since I can not connect to Win to check with CPUz. Can someone direct me to text-mode drivers for this laptop at the wake in winxp x 86 using NliteOS. I'll take the laptop to be fixed at a service center next month, but now I need a solution. Even if you can fix my recovery solution, it would be great.

  I can access the hard disk using Linux. So the HARD drive is ok, please do not refer me to change the HARD drive that is not an option right now. (HARD drive was the problem)

  Sorry for this long post
  Thanks in advance...

  Hello

  Hard drive error, hard drive 1 (3F1) is the disk failure hard try loading in the Bios pass Diagnostics, perform the test, if it fails, you will need to replace the drive. In case your hard drive is not detected in the Bios, you must reinstall the part of the rear panel.

• Retrieve the recovery deleted partition

  I have a HP ENVY Ultrabook 4-1130us

  Data recovery has been deleted by mistake, and now I think I have some question OS.

  Need to switch to restore my system to factory default setting.

  Thanks in advance.

  Hello

  The only way to re-create the recovery Partition is to perform a 'factory Reset' using your recovery (flash drive) media - see the document at the following link.

  http://support.HP.com/us-en/document/c03489643

  If you aren't this media or is it have more, you can order a replacement from the link below.

  Support of order recovery HP.

  If you have a problem with this link, see if you can order it directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Pavilion dm4 - 3013cl - recovery deleted partition

  I'm of the Brazil.

  On a trip to Hawaii in March 2012, a friend bought a HP Pavilion dm4 - 3013 cl entertainment pc, product number A6X70UA # ABA. Of course, it came in English. Given its difficulties with the use of the equipment, I proposed to install windows 7 in Portuguese.

  The system did not accept the update. Then I got the "great idea" to remove the recovery partition. After I created the new partition and formatted. Now, I can not install windows 7 home x 64 premmiun.

  At the end of the installation, in the first start, in the direction of the item "finish installation" opens a window titled "Windows Installer" and reported the following error message:

  "Windows could not configure windows to run on a hardware on this computer."

  When the system has restarted, the 'mouse' was not available and open a window titled "Windows Installer" showing an error message again, this time in Portuguese:

  "Windows is unable to complete the installation. To install Windows on this computer, run the Setup again. »

  When I restart the installation, the problem repeats.

  Unfortunately, because it is an imported product, the HP to the Brazil offers no technical support.

  It would be good to have help from friends here in the forum.

  Best regards

  Turkish Lira

  Problem fixed!
  Obrigado a todos!

• Satellite A500-134 - recovery partition is empty

  I have a satellite A500-134, shows drive partition recovery that it is 100% free and drive HARD recovery folder appears in the D drive (the laptop comes with 2 visible partitions C and D with 232 GB each). I found the recovery disk partition when I was looking at disk management in windows.

  So this means I can delete the recovery disc that nothing seems to be there?

  Hello

  Why you really want to remove the Windows RE partition?
  This Windows partition saves files to restore the computer, or to solve problems.

  Here's a good article on this subject:
  http://en.Wikipedia.org/wiki/Windows_Recovery_Environment

• Restore the partition from the Satellite Pro A200 recovery

  Hello

  I accidentally deleted the 5 GB recovery partition on my Satellite Pro A200. I have since recovered (and the data inside) and tried to create my discs of recovery using the "Recovery Disc Creator', but it is to say that it cannot find the recovery partition :(

  I tried fishing by the ini files for recovery disc creator find where he seeks the score, but could not find anything...

  One thing I noticed is that now it is recovered, it appears as a NTFS fs (I think that before it was an unknown FS type?) and volume label "HDDRECOVERY".

  Any ideas on how I can either:

  (a) wrong recovery tool by using the recovery partition
  (b) to make the score look exactly as it did before I deleted it, so I can use the tool as it is.

  Would really appreciate any help - want to make these recovery disc for my vista ultimate before I go around whacking backtrack top :) and dicking

  your

  Frank

  Hello

  > accidentally deleted the recovery partition of 5 GB on my Satellite Pro A200. Since I got (and the data inside)
  I wonder how you restored the deleted partition. Perhaps the recovery settings partition are not the same that before and, therefore, the "Recovery Disc Creator' doesn t work properly.

  Unfortunately, I think you will not be able to fool the recovery tool, if the recovery partition cannot be found.
  You can rename only the partition NTFS FS. This can be done in the disk management console.
  But I don t think this will solve this problem.

  It seems that you have to reinstall the whole OS using the CD of restoration of Toshiba or the original CD of Microsoft Vista

  Good bye

• How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  Pure how to install OSX on a Fusion drive and keep the recovery disc function

  These instructions assume that your iMAC partitions or file systems has been damaged and you want to restore to the way most efficiency with fusion drive and the recovery partition, similar to what was built in the factory.

  These instructions work for the iMAC, retina 5K end 2014 version comes with OSX Yosemite. The scores of major drive of the 128 G SSD and 3 TB of HARD drive has been configured as a logical drive (merger by car).

  WARNING: These instructions here are shared for interest only. Readers to take their own risk by following these instructions. The author is not responsible for any damage caused by following these instructions.

  This is the target disk partitions, and the configuration that we want to achieve.

  Disk0 is the 128 GB SSD - solid state drive and holds the start of the partition (disk0s3)

  Disk1 is the 3.0 to HDD - mechanical transmission and holds the Recovery HD partition.

  There are two EFI partitions to partition table GUID on both hard drives (disk0s1, disk1s1).

  Disk space remaining (partition disk0s2 and disk1s2) are used to create the disc of Fusion 3.1 to named "Macintosh HD".

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB LVG 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: disk1s2 Apple_CoreStorage TB 3.0 LVG

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk2

  Logical volume on disk0s2, disk1s2

  0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  Fusion unencrypted drive

  Here's how we do it.

  • A. clean reinstallation of Mac OS x.
  • 1. make sure that you back up all your data on the hard drive using Time Machine or other means. The following procedure will delete all data.
  • 2. create the OSX install USB, insert it to the MAC workstation.
  • 3. given that us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 4. in the menu at the top of the screen, select disk utilities.
  • 5. turn highlighted the volume of disk Fusion called "Macintosh HD." Click clear to clean.
  • 6. If his success, then go ahead to install OSX new to that partition, as usual.
  • 7. otherwise, if it does not, that means fusion drive has been damaged.
  • 8 follow the instructions below to fix it.
  • . B. Split disc Fusion in the physical hard disks
  • 1. Since us will be operated on the internal drive of the Mac trunk, assumes that we already have boot up OSX install USB drive (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3. on the screen of the terminal type:
  • Cs diskutil list.
  • You will see something similar to the screen below.
  • 4 copy the long string after Logical Volume and replace the UUID with it in the following command to delete the logical volume of the disc fusion (aka coreStorage of logical volume):
  • diskutil deletevolume cs UUID
  • For example:
  • diskutil deletevolume E59B5A99-F8C1-461A-AE54-6EC11B095161 cs
  • 5 copy the long string after the logical volume group and replace the UUID with it in the following command to remove the drive (aka coreStorage) fusion:
  • diskutil cs remove UUID
  • p. ex. diskutil cs remove E03B3F30-6A1B-4DCD-9E14-5E927BC3F5DC
  • 6. at this stage, the fusion drive has been deleted, and hardsisk SSD and mechanical hard drive will be reappear in diskutil or separate records.
  • 7. If step 5 or 6 takes more than 30 minutes to complete, this means that the fusion drive has been corrupted. You can follow the commands below to clear the table to partition the hard way. First command clears the SSD drive, second command erases the HARD drive.
  • The command does not return a response, after 1 minute, press Ctrl + Z to complete orders. 1 minute is enough data to code and erase the partition table on the disk.
  • cat/etc/random >/dev/disk0
  • cat/etc/random >/dev/disk1
  • . C install a new copy of Mac OS x for the hard drive HDD and tested this disk partition hard recovery work.
  • 1. go on diskutil to create a partition called Macintosh HD HDD hard drive using all the space there.
  • 2 do the same with the mechanical hard drive.
  • 3. follow the usual procedure to boot from the installation of OSX USB and install a new copy of Mac OS x hard disk SSD.
  • 4. This will create the correct priming of the partitions, recovery hard drive partitions and PSX partitions hard disk HDD.
  • 5. once the installation is complete, test if OSX may start successfully, but no need to go through the initial MAC OS x didn't put in place that we're going to waste this and do the installation again later.
  • 6. we must now test if the recovery hard drive partition works.
  • 7. reboot for hard drive recovery (see X - by pressing command and R at the same time during boot right after that you hear sound start and release only a few seconds after you see the apple logo and the progress bar for loading...)
  • 8. it is important to test and make sure that the partition of hard drive recovery.
  • D. recreate the fusion drive
  • 1 since us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3
  . on the screen of the terminal type:
• diskutil list.
• You should find that we have a list of disk group hard physical volume only, no logic here still.
• 4. you will see something similar to the screen below.
• 5. search for the largest partition on the SSD hard drive, which should be close to the maximum size of HDD to the SSD (121 G, for example) and mark the name of the device, this will usually be something like/dev/disk0s2
• 6. search the largest disk partition mechanical forming fusion with the SSD hard drive. This should be close to the maximum size of the mechanical hard drive (for example 3 TB) hard disk and mark the name of the device, this will usually be something like/dev/disk1s2
• 7
. Now let's create the merger in car (group alias logical volume) in the Terminal, type: diskutil cs create nom_lecteur driveIDs
• The number of the driveIDs is unlimited, it may be a number of discs, or a number of disk partitions. Always put the faster discs first, for example for our SSD disk0s2
• For example:
• diskutil cs create fusiondrive disk0s2 disk1s2
• diskutil - the version of disk utility command line.
  cs - This calls for Core Storage, which is necessary for the merger.
  create - creates a basic storage group.
  nom_lecteur - is the name of the drive and how you want that he
• appear in the disk utility (not the Finder - that comes later). You can call it what you like; in our example, we named our Fusion table "Fusion".

driveIDs - Here is the Player IDs of the readers you want as part of your Fusion table, separated by a space. In our example, they are 'disk0' and 'disk1', but it may be different in your configuration.
• It is important that the faster hard drive appears first in the command, which in our case the disk0s2 (a partition in the SSD). In this way, drive fusion will use this disk as primary and the cache. The second disc in the command, in this case disk1s2 (a partition on the HARD disk). The secondary disk (HARD drive) is used to store less frequently used files.  Otherwise, the fusion drive performance will be worse that it is designed for.
• 8. you will see something like below appear on the screen:
• Creation Volume logical storage of kernel
• Move isk0s2 storage of carrots
• Disk1s2 of switching for the storage of carrots
• Waiting for logical volume group appear
• Discovered the new group of logical volumes 'DBFEB690-107B-4EA6-905B-2971D10F5B53 '.
• Store LVG UUID: DBFEB690-107B-4EA6-905B-2971D10F5B53
• Finished CoreStorage operation
• 9 copy to the bottom of the string after "Discovering new Volume Logic Group" using the command + C
• 10. next, create the partition of the merger (alias logical volume) drive named "Macintosh HD".
• In the Terminal, type: diskutil createVolume groupString jhfs cs + size volumeName
• For example:
• Diskutil createVolume DBFEB690-107B-4EA6-905B-2971D10F5B53 jhfs cs + 'Macintosh HD' 100%
• diskutil - once again, this is the version of disk utility command line.
• cs - called the basic storage functions, which are necessary for this arrangement.
• createVolume - this is the command to create the storage area real for the reader who is represented by an icon on your desktop.
• groupstring - this is the long alphanumeric string you copied in the previous step. It identifies the table you created such as getting a volume placed on it.
• jhfs + -the format of the disc. It is Apple (journaled) extended Format, which is recommended for drives with an operating system installed on it.
• VolumeName - the actual name of the volume, how it should appear under the icon. If there is a space in the name, you must put the full name in quotes ("name") or put a slash before the (name Drive\) space. In our example, we made these, naming our volume "Macintosh HD".
• size : this is the size of the volume. In our example, we had a 1.1 TB drive. We used '1100g' to describe what 1100 GB (1.1 TB to base 10). Otherwise, we could have also used 1.1 T or even 100% as a size.
• 11. go to diskutil to verify that you can see this new partition on the list.
• 12. test by erasing all the data from it.
• 13. then you can go ahead to start on the USB drive to install OSX and install a new copy of Mac OS x on it.
• 14. This will allow you to keep the recovery disk feature.
• X. how Prime to recover partition
• Press and hold the command and button R set immediately after hearing the bells to boot.
• Only release it 2 seconds after you see the Apple logo on the screen and the progress bar for the start. This will start the partition of hard drive recovery.
• Y. how-to boot OSX install USB
• Press and hold the command and the optionkey together immediately after hearing the ringing of boot.
• Only release it 2 seconds after you see the Apple logo on the screen and it will give you a list of startup disk choice, choose the OSX install USB to boot from.

• Satellite T135D does not start

  Hello world!

  I was working with my satellite T135d. I turned off the laptop.
  Later, I tried again but when I press the power button it shows me the toshiba screen and then restart the laptop, and always occur at the same time.

  I don't know why this happened, the machine works fine before this isssue!

  Can someone help me?

  Thank you!

  Hello

  That something was wrong with your operating system and the laptop cannot boot the system.

  (1) please go to BIOS and check if the HARD drive is seen by BIOS

  (2) Please press F8 after turning on the laptop and see if you can repair the operating system (if this is not enough to go to point 3)

  (3) Please check if you can recover the laptop using the HARD drive recovery or recovery image that you created (I hope)

  Good luck