Satellite T210 problem of speaker sound audio (T210-112) if the system is moved

Similar Questions

• you see a blank page because no audio device attached to the system

  When I open the realtek hd, he says you see a blank page because no audio device attached to the system. to activate the gui, connect an audio device to the system. It has been like this since that I restart my computer and I had my helmet on for any input but it's always the same here standing, someone at - it advice I can do? Thanks for any response.

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Sounds or audio not audible in the system

  I did an extensive audit but unable to find correct the noise problem. I am unbale to hear all the sounds in my system.

  Thank you

  Hello

  Thanks for posting your question in the Microsoft Community.

  Sound problems can be caused by cables that are not connected properly, damaged drivers, incompatible drivers, sound settings, missing updates and problems with your sound card.

  1. What is the brand and model of the computer?

  2. have you made any recent hardware or exchange of software on your computer before the show?

  3. you receive an error code or message?

  Follow the steps below.

  Method 1:

   

  Repair of problems with his computer when your computer cannot read the audio data or when sound is turned off in Windows using the Microsoft Fix It from the link.

   

  Diagnose and automatically fix problems of Windows audio playback:

  http://support.Microsoft.com/mats/AudioPlayback/

  Method 2:

   

  Follow the steps in the link.

   

  No sound in Windows:

  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab4

   

  If you need further assistance on this topic, let know us and we will be happy to help you.

   

• Satellite Pro L100 132: old RAM is not recognized by the system

  The original memory of our laptop (Satellite Pro L100-132) is 512 MB.

  I bought an extra memory to 1 GB (type has been verified in the product documentation).
  I installed the additional memory, the system starts and you can see the additional 1 GB memory.

  However, the system does not see the original memory of 512 MB, additional memory is installed on the laptop.

  The system should see memory original and extra, because according to the specification for the serial number of the cell phone (checked on the official website of Toshiba) the maximum memory (which can see the system) is 2 GB.

  I tried to transpose the place of original and additional memory between them, but the problem is the same.
  Updated the system BIOS does not solve the problem at all.

  Hello

  As writes the user above, there seems to be problem of compatibility and updating the BIOS will not help you. A malfunction of the compatibility between the old and new module of RAM which s

  This new module of RAM you bought?

  I think you need two modules of RAM high quality they are compatible together. You can order these ASP RAM modules in your country. Quad has already posted part numbers.

  Check this box!

• trasferring a book of 130 pg in video. PGS contain text drawings transistions & audios ARE in place. You put each where it belongs. 25 successfully accomplished of the GSP. I move audio to pg 26, the system stops suggest another software.

  Director of Windows 2.1

  Director of Windows 2.1

  =================================
  If your project includes still shots and audio...
  PhotoStory 3 can be a better application:

  PhotoStory 3 for Windows
  http://www.Microsoft.com/windowsxp/using/digitalphotography/Photostory/default.mspx

  Sounds like a question of resources of the system or audio
  file may be incompatible with Movie Maker.

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wmv, wma, wav

  Might be interesting to try to create several small
  projects and save each of them in .wmv or DV - AVI
  format, and then reimport the finished collection
  video files in Movie Maker and combine them into
  the final movie.

  John Inzer - MS - MVP - digital media experience

• upgrade from Vista to Win7: no color for speaker Icon or WIFI icon on the system tray

  After the upgrade to Win7, both the WIFI icon and the "speaker" icon are white without color.  Just annoying for the speaker, but I cannot see the strength of the signal for the wifi icon.

  Hello
  This does not solve the problem.  The advice given doesn't turn, and turn off the system icons.  The issue is not that the icons are invisible.  The problem is that the icons are there, but they have no color, as I expect.

  Hello

  It is design in Windows 7. There is no way to change this in the user interface.

  If you want to provide feedback about this, you can use the following link.

  Windows 7 reviews: speak to us at Microsoft

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Spooler problem printing with Windows XP error: "error 2: the system cannot find the file specified."

  Original title: problem with Windows XP error print spooler

  My printer stopped working (after several years of use); the computer is not even grateful as being installed. Cannot reload the printing software. Tried to download the software of HP, but all that says there is a problem with the print spooler file: error 2: the system cannot find the specified file... (when I try to start it directly)

  Hello

  1. What is the brand and the model number of this computer?

  This problem may occur if a third-party printer driver or an installed third-party service prevents you from adding printers, or if the third-party printer driver or the third party service affects the functionality of a newly installed printer.

  To resolve this issue automatically, click the fix for this issue link in the article below. Then click Run now on printing problems and printing errors troubleshooting, then follow the steps in this wizard. If the problem persists, perform the rest of the procedure described in the article.

  You cannot add a printer and you receive Printer Spooler error messages in Windows XP
  http://support.Microsoft.com/kb/324757

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Are there problems with Microsoft 7 and Frontpage 2002? The system shuts down when I try to add a hyperlink.

  The system shuts down when I try to add a hyperlink.  The hyperlink insertion page opens.  But when I try to click on the link that reads "Microsoft Frontpage has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. »

  Edited to add: if I type in the hyperlink, it seems to work.  But in the past, I just clicked it.  But now when I click on it is when she stops.  Strange.  Did not this on the Vista computer.

  Hello CaptainKAG,

  Thanks for posting on the Microsoft answers Forum.

  I recommend you post in the Forum Office where this problem is related to FrontPage 2002. We can install on Windows 7, but is not fully compatible, so some features may not work properly. Office 2003 and Office 2007 are fully compatible with Windows 7.

  Click here to post in the Forum Office.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Satellite A500 - problem of speaker (Harman/Kardon) left

  Hello

  I have a Toshiba satellite A500 laptop and recently I seem to have intermittent problems with the built-in speaker on the left.

  Sometimes the sounds come out of the speaker perfectly, but it will turn off for a while and then come back, and then turn off again. There is no model it at all, so I can't pin point why it's happening.

  It doesn't seem to be a problem at all with the right speaker.

  Can anyone help here please?

  Could it be a loose wire or something to do with a driver who needs update? I use Windows 7, which I am new to.

  Any info at all would be great - thanks.

  Paul

  Related issue as far as I know that this issue has nothing to do with driver, in my opinion, this is material. You must understand that on this virtual path, we can offer accurate diagnosis.

  When you use the diagnostic tool of Toshiba is the same problem?
  It comes with a headset? Everything works ok?

• Satellite P300 - how to record sounds from sources other than the microphone?

  I own a P300 Satellite with Windows Vista Home Premium. My problem is the only source that I can use to record sounds is the microphone and I want my voice to blend a wav. Pre-recorded file of my guitar. I used to do with my windows xp desktop computer and a map its SoundBlaster.

  Is it possible to do it on my laptop?

  Hey,.

  You can also record sound using the microphone jack on the front of your laptop (line). Then, you can connect a Microphone or your guitar to this jack and record music using software like Audacity recording for example.

  If you have any other questions please let us know! :)

• SYNCHRONIZATION PROBLEM TRYING TO RECORD AUDIO AND VIDEO WITH THE LIFECAM VX-3000

  I use Windows 7 and have 2 GB of RAM, but when I record on my hard drive with the LIFECAM VX-3000 reading is slightly, but apparently out of sync.  Does anyone know why?

  Thank you

  Tony Cash

  Hi Anthony,.

  Although that do not know what could be the cause, here are a few things you can try.

  1 see if turning off the background tension or lowlights helps solve the problem of synchronization. See the webcam of the help manual.

  2. lower the screen resolution. Reference: change your screen resolution

  3. install the latest version of the software of the webcam.

  You can get the software here:http://www.microsoft.com/hardware/download/DownloadResult.aspx?category=ICE&type=LifeCam&name=68A-00001&os=Win7_3264&lang=en

   

  For more information, see:

   

  http://www.Microsoft.com/hardware/digitalcommunication/LifeCam/Readme/en-us/default.mspx

  4. make sure that you have installed the latest drivers for your video card and sound card. See the documentation for your hardware manufacturer or a web site for more information on how to update the video card and sound card drivers.

  For updates of the driver, see this link:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A-P50-12PNL - after Win8.1 upgrade cannot create the system image

  After updating my laptop Satellite P50-A-12PNL to Windows 8.1 I can't create an image system (copy). The message:

  +"There is not enough disk space to create the volume shadow copy on the storage location. Ensure that, for the volume to be backup upward, the minimum disk space required for the creation of shadow copies is available. This applies to the backup destination and volume included in the backup. Minimum for Volumes less than 500 MB, the minimum is 50 MB of free space. for voulimes more than 500 MB, the minimum is 320 megabytes of free space. Recommended at least 1 GB of free disk space on each volume if the volume size is larger than 1 GB (0 x 80780119) ' + '.

  I think the problem is the Windows for the systemrecovery reserved surrounding.
  This seems to be too full. 350 MB 349,94 is in use.

  What should I do to get it working again the backup?

  Usually you could solve this problem by extending the partition on the volume where the shadow is being created.

  You can make the disk check and check if the problem persists.
  1) press the Windows key + C to open the bar of charms.
  (2) now, click on settings, then PC settings.
  (3) now, click general, and then click Restart now under Advanced Startup.
  (4) now click on troubleshoot.
  (5) now click on advanced options and select command prompt.
  (6) type Chkdsk /r and press ENTER.

• Problem with list of contacts after upgrade of the system

  I upgraded my MacBook Pro to 10.7.5 to 10.11.6 and everything seems to be going smoothly, he started and worked

  and ran all programs as planned; However, when I checked my list of contacts that was > 200 people with phone and address information in my 10.7.5 system, the 10.11.6 contacts in the file only had the info address of Apple in Cupertino.

  what I really needed was gone.  Is it possible to restore it? My iPhone still has information

  in contacts but I kinda scared that if I connect my iPhone via iTunes, it might wipe my iPhone contacts as well & that would be a disaster.  I also have a Time Machine backup of the 10.7.5 system that has not been connected to the 10.11.6 system yet.  In addition, all the birthdays, family, appointments, meetings, and special events in iCal application were destroyed as well (but still exist on the iPhone).

  Terry,

  What happens if you choose Contacts > display > display groups?

  

• Satellite L300D do I need mediaback disc Toshiba to restore the system?

  I'm not a very technical person and I dropped my laptop!
  Machine did not work and I had a new hard drive installed, but webcam, microphone etc do not seem to work.

  They gave me the laptop put in place as a gift and don't have disks or backup.
  The shop got my documents and photos and I got it up and working with the docs and the internet, but that's all.

  Does only I the mediaback disk from Toshiba to restore all systems?

  Thank you for your time.

  Hello

  You want to get the new laptop and want to put it to factory settings?
  If Yes, then you need the recovery disc.

  The recovery disc can be ordered from here:
  https://backupmedia.Toshiba.EU/landing.aspx

  It s not free but he s also cheap; subject of 30 euros

• Okay, so my problem is that Disk Defragmenter, disk checking and the system restore will not work.

  I tried to go to the c drive and right on it and going click Tools then error checking, but it did not work. I tried dfrg.in and right click to install. I tried to use cmd fixes, I found on the net. I tried a lot of bugs, but nothing helped. Any ideas? Thanks for your time. Here are some links with difficulties, I've tried. I don't know he said that my c drive is dirty my c drive is mt RAW disk fnctions used due to the command chkdsk/f.

  http://www.theeldergeek.com/forum/index.php?showtopic=28251
  http://www.andreasroom.com/blog/archive/2004/01/18/Defrag.aspx

  xador,
  If you start the command prompt and run Chkdsk/r you get an error right then or after restart and tries the kick-off of the check?  What is the error message you get?  You have all the maintenance of the system or registry cleaner program installed or running?  You have your running antivirus software?

  Let us know. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.