Satellite U200-141: problem with drivers after installing Vista

Similar Questions

• Problems with sound after installing Vista Ultimate SP1 on HP Pavilion Dv4

  I lost sound after installing Vista SP1 Ultimate on my HP Pavilion Dv4... everything was fine before. Help, please.

  Go to the HP support website and search for Windows Vista drivers for your specific model number. Also look for recent updates, even if your PC comes with Windows Vista preinstalled.
  http://welcome.HP.com/country/us/en/support.html

  If there are Vista drivers then download to a folder on your hard drive and install all of them, starting with the installation card mother/chipset drivers, then the SATA, LAN, Audio, drivers and other device drivers.

  J W Stuart: http://www.pagestart.com

• Satellite U200: There is no sound after installing Windows XP

  Hello

  I HAD INSTALLED VISTA ON MY SATELLITE U200, BUT I HAD SOUND PROBLEMS AS MANY PEOPLE

  No, I reinstalled xp recovery disk, but still sound does not work

  Can someone help me? installation of the drivers, etc.

  Best regards

  Joeri

  Hello

  As you already suggested many people have had sound on Vista OS on Satellite U200 problems in the past.
  BUT there is a SOLUTION! Yes, there a way to get a sound in Vista.

  Please check these discussions:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20898
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21171

  It seems dumb has been activated and so the sound did not work

• problems with sound after installing windows 7

  My sound/audio does not work on my HP Pavilion dv2023tu notebook after a clean installation of windows XP.

  The convenience store said there is a problem with the driver, but I can't find a new driver through windows update, and HP does not either for my model. The device installed on my laptop is called high definition Audio Device. Can anyone help, if not, where can I download the drivers from. It is better to buy driver update software to help locate the right driver?

  Hello

  A lot of Vista for Windows 7 drivers, so try the following.

  Download the Audio driver from the link below and save it to your desktop.

  FTP://ftp.HP.com/pub/SoftPaq/sp34001-34500/sp34387.exe

  Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation.  If the driver installs successfully, restart the computer and check your audio files.

  Kind regards

  DP - K

• Satellite Pro C850 - problems with WiFi after Windows update 8.1

  Hello

  I was wondering if someone could give some advice on a problem I have.

  Had an adjustable C850 Pro for a few months and worked well on Windows 8.
  I myself am then harassed and intimidated by Microsoft Update in order to install Windows 8.1 and in a moment of weakness, I succumbed (got sick of the nagging).

  Since that time, my wifi is very intermittent; either I'm on another computer write this and the laptop is essentially not connected to the internet.

  For some reason any (although I didn't try it before), I can not connect via ethernet either, so I think it's probably the driver problems. (I also tried to connect the public wifi but fails).

  I tried to install the driver WiFi Toshiba 8.1 but that has not solved the problem.
  Then I noticed that I'm supposed to install a bunch of drivers in the order.

  Maximum setting to do it, but the first package (associated with bluetooth) said I have to remove the current driver... I try by "turning off", then "Uninstall" but 8.1 seems to re - install automatically and I don't know how to disable this option (I can try to delete the driver file, I guess, but I'm sure 8.1 covered too and will probably launch a drone to try me out ", if I do). *

  Any kind soul there suggestions on a way forward? Pls.

  I see in the instructions of Toshiba Windows Update 8.1 should I have uninstalled the drivers before the update, but there is not much I can do about it now. :(

  Hello

  > I don't see in the instructions of Toshiba Windows Update 8.1 should I have uninstalled the drivers before the update, but there is not much I can do about it now
  All your problems with the Windows 8.1 update related to the fact that you have not upgraded the Windows 8.1 system as recommended by Toshiba.

  Details:
  http://www.Toshiba.EU/innovation/generic/windows8_1-message/

  Solution?
  Back to Windows 8 (reset the system back to factory settings)
  Then, install all updates and patches for Windows 8 and follow along with the upgrade of system as described on the Toshiba Windows 8.1 upgrade page

  On the page of the Toshiba UE driver, you will find all the instruments that must be installed in the correct order and Windows 8.1 driver!

• Problem with wsconfig after installing APSB07-02

  After installing the patches on APSB07-02
  I get this message?
  "Servers JRun (s) found on host 127.0.0.1 should be upgraded to use this version of the web server configuration tool."
  
  It is an own CF MX 7.02 in multi server, jrun update 6 installation, all the patches of jrun since updater 6
  
  TIA

  I found the problem, it is with the 62070_64614.jar hotfix

  http://www.Adobe.com/cfusion/knowledgebase/index.cfm?id=f9db1285
  JRun 4 Updater 6: fix for remote transactions

  Add each hotfix one at a time and it broke all.

• Satellite P300-156 - problem with drivers ATI 3470

  I have download the new catalyst 9.3, I exceeded the drivers with mobility modder, but always after the installation, the pilots see 3470 drivers only 3450.
  What is happening and why Toshiba is not updating the drivers for Satellite P300 on the site?

  Hello!

  The reason is the reason for which you are trying to use a driver that is designed for desktop graphics cards and not for laptops.
  It s on your own risk to use these drivers because they don t have a protection against overheating.

  In your case I remove and install the most recent that you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com/-online decision-making supported Downloads & => Download drivers

  Good bye

• Problems with drivers after formatting

  Hello

  First excuse my English, I'm only a French.

  So, I need your help because I just decided to format my T60p (2007-CTO), not with the CD of lenovo, but with only the CD of XP SP2.

  After that, I downloaded drivers on lenovo Web site and run them. But I have already some problems (no sound for example) and when I go into the properties of the office, in the management of devices, he notices me I have some devices not recognized (with a yellow "?" in "other devices"). Here is the list of the drivers that does not recognize:

  -BCM2045B

  -Biometric coprocessor

  -SM bus controller

  -Audio device on High Definition Audio bus

  -Unknown device

  -Device modem on High Definition Audio bus

  However, I have downloaded all the drivers there I think, so I don't understand. I put you below a list of all the drivers that I have installed, in the order that I have installed (with the reference number of the driver, as we have by downloading on the lenovo website and the description of the driver):

  -kb888111xp2fr - class driver Universal Audio Architecture (UAA) High Definition Audio (Q888111)

  -7kra26ww - Intel PRO - 1000 LAN adapter software

  WindowsInstaller-KB893803-v2 - x 86 (not a driver lenovo but necessary for following drivers)

  -dotnetfx35setup (not a driver lenovo but necessary for following drivers)

  -6ju708ww - Power-Manager

  driver ThinkPad Power Management - 6hku07ww-

  driver Hotkey - 6jvu34ww-

  -6hcx41ww - ThinkVantage Access Connections

  -6asa52ww - ThinkVantage Active Protection System

  -6mwc15ww - Intel Wireless LAN (abgn, abg, bg)

  Cingular Wireless WAN - 7cwc05ww - adapter software

  driver Modem - 7fma13ww-

  -7igu07ww - UltraNav driver

  Driver Interface System - 7jif12ww - Lenovo

  Bluetooth - 7kbf02ww - data rate improved Firmware update

  -7kts04ww - ThinkPad BIOS settings Windows

  Bluetooth - 7vba14ww - with II enhanced data rate software

  -7vgq12ww - UltraNav utility

  ThinkVantage Productivity Center - 7vuy02ew - Pack

  Audio - 77a224ww - XI

  -77bm03ww - file Microsoft Bluetooth Support Bluetooth with Enhanced Data Rate

  -77gr09ww - UltraNav Wizard

  Driver Interface System - 79d179ww - Lenovo

  -79oi18ww - monitor file (before the video driver Installer)

  utility to update the BIOS - 79uj32us-

  Verizon Wireless WAN - 79wc17ww - adapter software

  -oss608ww - Intel chipsets Support

  I think that just the order is important until the pilot "ThinkVantage Access Connections" because I read once downloaded drivers that some necessary drivers installed at the top of the list.

  If someone (who can understand my bad English) can help me to install the drivers that I miss, it will be very nice :-)

  Thank you

  1. just something checkin: Lenovo driver facilities require two steps 1. Extract 2. Install. When you double-click on the driver download are extracted, usually in a C:\DRIVERS folder. Then you go to this directory and run the Setup program, usually setup.exe. The directory and installation method may vary - check the installation instructions. You do the two steps?

  2. why not use ThinkVantage System Update?

• problem with sound after installing windows 8.1

  Hi, I have dell vostro 1400 and I installed windows 8.1 a few days before and since the sound does not work in my machine! tried to uninstall the audio and installed again, nothing... set driver update audio driver... nothing as well, even I uninstalled windows and installed again, but no sound comes out, any help please because I'm depressed and don't know what to do?

  THX

  Hi nashnash15,

  I checked the system specification and supports Vostro 1400 are Windows XP and Windows Vista 32 Bit operating system. However, this system has not been tested with Windows 8.1 and would usually rely on generic drivers of windows updates.

  If in cases that do not work, you may need to return to the old operating system.

  Let me know if you have extra help.

• problem with MAX after installing LABVIEW 10

  Hello everyone, I have a serious problem I installed labview 10 yesterday on 2 laptops, one of them works perfectly, however, the other gave me a two erros

  1.http://digital.ni.com/public.nsf/allkb/6CA56E2DDBCCA06086257591006141EE

  2. http://digital.ni.com/public.nsf/allkb/F24AA9FB6A3A0E9D86257539006141BE

  I tried the solutions above in the link, but it was all futile. can someone please suggest me what would be the problem? I had already LV8.0 on the laptop which is the cause of the problem. I tried to re - install the disk driver given

  for me by NEITHER, but no luck.

  When I started the laptop for the 1st time, there was a mistake in saying DOS command prompt: DATABASE ERROR and I cancelled the error!

  In addition, Labview works fine, its only MAX who has problems. is there a way I can only MAX to uninstall and reinstall? Please help me...

  Thank you

  Sorry CrackJack

  Try this one http://digital.ni.com/public.nsf/allkb/86256F0E001DA9FF86256FFD005B827C?OpenDocument    

• Problem with restore after installing IE9

  I had upgraded to IE 9 and my pc started running slow, then he must be stopped when I went to my sites. So I decided to restore to the point before the download. Now my pc boots but I have a black screen. Anyone know why and how to fix it?

  Hi tasjac0

   

  Method 1 :
  You can check if you are able to start properly in safe mode. In safe mode; you have access to only the drivers and base files. Check out the link to start the computer in safe mode and then check-
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  
  Method 2:

  You can check if you can use the last known good configuration. It's a Windows startup option that uses the most recent system settings that worked correctly. Whenever you turn your computer off and Windows shuts properly, important system settings are saved in the registry. Then it starts Windows with the last configuration of registry and the pilot who has worked successfully.

  Please refer to the below links to get help on the issue.
  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

   

  I hope this helps.

• Problems with Lightroom after installing Windows 10

  I just updated my computer Windows 10 and now lightroom keeps stopping saying Lightroom does not.  I need to download something to clarify that I have not had this problem before?

  Hi Mole2278,

  Greetings.

  Please check the below thread and follow the instructions

  New Lightroom on Windows 10

  Concerning

  Rohit

• Satellite M60 - BK3: cannot get sound after installing Vista

  Hello

  I installed Windows Vista Ultimate (32 bit) on my Toshiba Satellite M60 - BK3, but I can't not all sounds is the correct video settings. I searched on the internet and it seems that this family of satellites is not supported to be upgraded to Windows Vista: S

  Does anyone have an idea of how get these drivers to make my laptop works fine with Vista?

  Thank you.

  Rodrigo

  Hello

  This Satellite M60 - BK3 model does not work for me. Where did you buy it?
  Try to install a hardware diagnostic tool to know what sound chip and the graphics card supports this laptop.

  You can download the drivers from the part manufacturer's website.

• Satellite U200-181 - his plays not after the Vista Ultimate upgrade

  I have restore Win XP disk recovery and upgrade to Windows Vista Ultimate. After you have reinstalled audio drivers (which is installed correctly), I have no sound in my system. All volumes maximum and not silent. It seems that his program (by pressing the sound keys jogdial). But all the volumes on the right level and not mute.

  Hey Buddy,

  I have an idea that might help you:

  Go to www.realtek.com download drivers, uninstall the drivers from the Toshiba website and install the drivers that you´ve downloaded on the realtek site.
  No matter if it s or not, give a short answer. Would be grateful. :)

  Welcome them

• Satellite L40 - 14N is not working after installing Vista SP1

  Greetings

  After Vista with SP1 update, the computer became non functional all the lights blink but not display.
  Any ideas people.

  Concerning

  Hello Mike

  Sorry, but your description of the problem does not say much. Black screen on startup, after wake from sleep mode or hibernation mode?

  Please give us more information.