Satellite U200 ceased start - not not possible to access BIOS

Hello world

My Satellilte U200 has stopped booting and cannot even get to the BIOS. Nothing comes on the screen.

The drive LED only lights for a while and then no further action. I have re-sit the drive, the memory modules and the battery but no change. Also
tried to start without battery and alternating current with the same result.

I tried to drive on another system and its fine.

I'm starting to think that the motherboard has malfunctioned, because if one of the above components have been the question I should still see the BIOS splash screen.

Any thoughts?

Thank you
-John

> I'm starting to think that the motherboard has malfunctioned, because if one of the above components have been the question I should still see the BIOS splash screen.
Maybe you're just :(
It looks a bit like a motherboard or as Akuma suggests the question of the CPU.
The two parties could be affected and if one of the parties would be a malfunction, the laptop will not start and you would not see the Toshiba start screen and would not be able to access the BIOS settings.

I think you should get in touch with the local ASP. The authorized service partner could control the simple components and could provide more details on the affected pats.

The point is that a new motherboard is not good cheap. So if the guarantee is not valid, you will have to pay for this replacement
This could be a tough call what to do; Sell this laptop and purchase a new/second hand one? Or buy a new motherboard?  :|

Tags: Toshiba

Similar Questions

  • Satellite Pro U400 starts not-cannot start Windows

    So I have no idea what caused this minute, it's nice, I look at things on the next screen thing 4od is empty and not coming back so I hold down the power button to restart and a black "windows boot manager" is displayed and I can not fundamentally get off this page...
    It is said:
    Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

    1. Insert your windowsinstallation drive and restart your computer.
    2. choose your language settings, and then click "next".
    3. click on 'Repair yourconputer.'

    If you do not have the disk, contact your system administrator or computer manufacturer for assistance.
    File: \Boot\BCD
    Status: 0xc0000034
    Info: the windows boot configuration data file is missing required information.

    I do not have installation or recovery discs, I used another computer to burn a disc recovery ISO put it in and nothing happened.
    I would like to ring toshiba but I don't have any minutes left this month and I don't have access to another fixed telephone/phone

    I'm really confused as to what to do, each other times as my laptop is messed up, I just did a recovery of hard disk and restored to factory settings by clicking on f8 but it doesn't work this time

    I can't afford a new laptop or taking it to be repaired so if anyone knows what I can do please help!

    Thank you
    Steph.

    Post edited by: Steph92

    Oh I forgot to tell my computer toshiba laptop satellite pro u400
    It came with windows vista preinstalled

    Hello

    I think it is just a software problem (Boot Manager).
    Try to repair the operating system by using HARD disk recovery;
    Press F8 why portable power.
    Then choose fix my computer, then choose disk HARD recovery.

    If this is not possible, order the disk recovery from here:
    http://backupmedia.Toshiba.EU/landing.aspx

    Then, you will be able to reinstall the OS using the recovery disk

  • Satellite U200 - sound does not work after the installation of Win8.1

    Hello guys,.

    I have some old Satellite U200-165. I installed windows 8.1 Enterprise assessment successfully after that I changed the hard drive SSD, but the sound does not work. Windows showing that his work perfectly, but it does not come out.

    An advise please.

    Satellite U200 is a pretty old and not supported for Win8 or Win8.1 machine. I think that we have no report on this forum how this old piece of equipment works with Win8.

    If the sound card is properly installed, have you checked all the sound settings?
    I presume that the same problem is with a headset, right?

  • Satellite Pro M70-113: not possible to write on CD - R and DVD-R

    Hello

    I have a Toshiba satellite pro m70-113 laptop.
    Playback problems:
    I'm unable to read cd - r. It's really strange that a few days earlier these CD - R have been reading very well on my drive.
    and when I click on the cd drive in my computer, an error dialog box shows and says f: is not accessible, incorrect function. Here's a screenshot of the error... :
    http://img64.imageshack.us/img64/9574/1bp3.jpg

    And when I try to read my DVD-R, a few times they read very well but sometimes it does not read and the drive LED is lit when it does not read the dvd - r.
    When it reads the DVD-R, the following error message comes: screenshot here: http://img172.imageshack.us/img172/9674/2bc0.jpg

    Write problems:
    After getting reading problems, I tried to test my drive writable.
    And I found that I'm unable to write on cd - r. I used alcohol and Nero once but without success.

    Although the same content when it is burned to cd - rw, it is a success.
    I am able to burn successfully on a support DVD + RW 4 x with data amounting to close to 4.34 GB for DVD5...
    When I insert a DVD - R Virgin car doesn t detects it as a blank media and the keps LED on lighting constantly and if nero State doesn't detect my DVD even! I'm not able to write on my DVD-R media...

    In short: write to RWs is possible for both cd - r and dvd + RW not possible of writing on CD - R and DVD-R.

    Please help me.
    It is only 7 months since I bought this laptop and believe that there may be no other person on this planet who looks after the training better than me!
    Really, I have not much used this drive and never scratched/gradient/local support, only the Supermedium media inserted.

    Thank you

    Hello

    Well, based on your description it sounds like the drive cannot calibrate the lens and, therefore, it of not possible to read or write to these media.
    Usual it of not possible to fix this and the replacement drive is necessary.

    You can also consult the user manual. You will find a list with all supported and compatible media.

    I also found this topic in the forum:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13170&MessageID=48243

  • Satellite L300-19F starts not-cannot start Windows

    My mobile no dΘmarre, "cannot start Windows. "To solve the problem: restart with the recovery CD.

    I can do that, but first of all, I don't want to try to save the data (and photos) from a hard disk.
    Is it possible, for example, go to BACK when booting with the recovery CD, and copy the data on USB?

    Furthermore, all my data on E:\ partition. Will be crushed it during the installation of recovery?

    Please notify. Kind regards.

    > Is it possible, for example, go to BACK when booting with the recovery CD, and copy the data on USB?
    No, it is not possible!
    If you should start up using recovery disc then the recovery process would be started and the whole HARD disk may be formatted!

    You can try to start by using a WinPE
    http://www.LiveCD.com/

    This allows you to start the device and access the data on the HARD drive

    You could also build own Windows live CD
    Check this box:
    http://www.MakeUseOf.com/tag/how-to-create-your-own-custom-Windows-Live-CD/

  • Satellite A60 - replacement HD not recognized in the BIOS

    I have an A60 which began to shut down and not start.
    I tried to use the restore CD that has reinstalled the operating system, but the laptop still not managed to start after that.

    I suspected that the HD failed and bought a toshiba 40gig drive replacement. I have installed the new drive but and been in the BIOS (F2 and F1), but the BIOS indicates there is no HD installed.

    The recovery CD installs saying there no drive selected.

    Can anyone offer any help or advice on what I can try next?

    Here are some technical details.

    Laptop Toshiba A60-672
    old MK4025GAS (40gig) drive
    spare MK4026GAT (40gig) drive

    Thank you
    Phil

    > I have an A60 which began to shut down and not start.
    I tried to use the restore CD that has reinstalled the operating system, but the laptop still not managed to start after that.
    For me, it looks more like an overheating problem caused by the internal temperature.
    It is a typical problem if the cooling fans are clogged and that air can circulate properly.

    > I thought the HD failed and bought a toshiba 40gig drive replacement. I have installed the new drive but and been in the BIOS (F2 and F1), but the BIOS indicates there is no HD installed.
    One of my friends has updated the own Satellite with the new HARD drive and the HARD drive was not recognized by the BIOS due to the assignment of the PIN wrong and riders Check this!

  • Re: Satellite A65 will start not because of recovery CD formats the HARD drive?

    1. my Satellite A65 WinXP seems to be corrupted and does not start.
    2. my system is dual-boot, Windows XP (16 GB) and Xandros Linux (24 GB)
    3 Xandros boots. Windows XP has been removed from the start menu.
    4. If I run the Toshiba Recovery CD, it will enter and reformat the whole disc or only the first partition WinXP?
    5. are there instructions online for the recovery CD?

    > 4. If I run the Toshiba Recovery CD, it will seize and reformat the whole disc or only the first partition WinXP?

    Well, if you have an older version of recovery which provides two options; standard recovery and recovery expertise, so you could choose the partition on which the operating system must be installed and ONLY that partition is erased and formatted.

    But if you, recovery CD doesn t contains options then the recovery CD will format the entire HARD drive!

    So be careful

    > Are there instructions online for the recovery CD?

    Search this forum for similar issues. There are a lot of comments that might help you

  • Satellite C55-A-1TF - not possible to download drivers

    Hello, I need help to download the drivers.

    I have Toshiba Satellite... A-C55-1TF (PSCJEE) Windows 7 64 bit
    I download the parts of the drivers
    http://www.Toshiba-Slovakia.com/innovation/download_drivers_bios.jsp?LNG=22&service=CE
    There is my laptop... Driver type all THE... All countries, English or the Slovakia (I am from the Slovakia)...
    *
    Find me a driver, for example click driver USB Intel (10/12/14) and I vote an error page errors, an error has occurred.

    Please try again or ERROR 404. and what I wrote about all the controls we want download (12/10/14)...
    Thank you. Erik

    Sorry for my bad English, I am of the Slovakia.

    You are right; 64-bit drivers for Windows 7 for the PSCJEE C55 - A satellite can not be downloaded now.

    Looks like there is a problem on the page of the Toshiba driver and I hope that this could be resolved as soon as possible

    In any case, you should be able to download drivers Win 7 choice of another number of model as PSCGE
    Most of the drivers should be compatible with the PSCJEE series.

  • Satellite A300D-151 not starting not don't logo, BIOS

    Hello

    I recently had problems with my A300D.

    During normal use, the screen has behaved weird, became white and normal several times until it stopped working. When I rebooted the green light, the DVD is available and I can detect two low beeps. That's all. No logo, no to enter bios, nothing.

    I tried remove the batttery, cut the power and press the power button for the minutes and start sto attemtpetd with and without battery to no gain.

    The computer is powered with a correct voltage (19.4 V measured) but does not start.
    What is the CMOS battery that needs to be replaced?
    Or bad memory?

    That indicates the only two beeps?
    Motherbooard defective?

    Any advice or ideas are appreciated.

    Thank you

    Dear KSM;

    as said it that your laptop is not on... *.
    * I think you should try this troubleshooting... *.
    * first of all remove the battery and adapter so the laptop, then hold the button the button up to 30 dry *.
    * then release the power button and just plug your adapter from the laptop and turn on the laptop *.
    * and check works or not... *.
    * If your problem is not corrected, then you need to visit your service station nearest may be that it's hardware.

    * Thank you *.

  • Satellite M105-S3084: is not possible to record streaming audio on the web

    I have a laptop M105-S3084 Satellite with XP MCE SP2. The sound card seems to be something called "Realtek High Definition Audio" on a bus to internal. The driver is 5.10.0.5200 dated dated 09/12/2005.

    This sound card and driver seems not to have what is necessary to allow me to record audio streaming on the web.

    I've been on audio NoticiasLA and determined that although with as SoundBlaster sound cards can save essentially anything that can be produced by PC speakers, this is not the case with the map I have in the Toshiba Satellite.

    For example, only flow for record in software like Audacity and others are 'Mic' and 'Line' all that is available with other cards is several other inputs (Audio mix, etc.) that the software allows to record the sound from the web browser.

    Other than to get another PC or sound card, is there a way to improve the capabilities of its Realtek High Definition Audio card? Others were able to achieve sound web using this sound card?

    Thank you.

    Hello

    I use two programs to record the sound from the internet sites;
    The first is wave-recorder and the second Messer.
    These two applications allow you to record from wave and convert and save files in MP3 format.
    You can choose the source of the record; the external microphone or wave.

    Check it out. In my case it works and I m very happy

  • Satellite A200-1ZF starts not flashing power led

    Hello

    Today, my laptop Satellite A200-1ZF wouldn't start, instead, my power led flashes orange-orange-blue-orange-orange - blue and so on and so forth.
    The HDD led transforms the blues when I turn on the computer and seems to work fine (I hear the normal sound of market from the HARD drive).
    I tried to remove the RAM module to see if there is a fault in one of the modules, no help. I tried removing the battery and it works only on current alternative, also no help.

    Anyone have any idea?

    Hello

    I'm a bit confused of m.
    If I understand you just your laptop starts up but screen is black or how figure you?

  • Satellite U200: I am not able to burn DVDs

    I have a problem with the DVD writer:

    Since I formatted (and then reinstall with the restore CD that was with the computer at the beginning), I am not able to burn DVDs!

    How can I do to get that!

    And also, it's weird, instead of showing a DVD player, there are 2: one for the CD, a DVD, when it's the same thing...

    I am able to read the DVD, but I am not able to burn them :(

    > And also, it's weird, instead of showing a DVD player, there are 2: one for the CD, a DVD, when it's the same thing...

    It's very strange it s confusing two s WEIRD appears in MY computer

    What you could do is remove the player of ODD (CD/DVD) Device Manager, then restart the laptop.
    Please check if the CD/DVD would be recognized correctly after reinstalling again.

  • Satellite C660/C660D starts not (black screen)

    So this morning after having attempted to power my Toshiba Satellite C660/C660D upward I met up with a black screen.

    The power lights both work and light, fans the vortex when I turn on but nothing ever comes on the screen, I was wondering if someone could help here?

    It is less than 3 months.

    To be honest I really don t know how to help you.
    Remove the battery, leave the laptop for a while and try to start the laptop with AC power only. Try to do several times with or without battery. If nothing is done it must be a hardware problem, so I recommend you contact Toshiba service and ask for help.

    Guarantee is valid, then there is no reason to worry about this.

  • Satellite C855-1j4j does not turn on - the Bios Update interrupted

    Hello

    I did the update on my laptop Satellite C855-14 days, and all of a sudden the power went out,
    now the pc running either party but not nothing DON'T get PAST...

    What should do?

    + The message was edited: message has already been translated.

    From my point of few the EPROM module must be re-flashed once more with special BIOS crisis recovery disk.

    Usually, this procedure could be done only by authorized service provider available in your country.

    But I found an interesting announcement about how to flash the BIOS on U400 series.
    See the last post [here: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=62852]

    But I don't very well if this info would be useful and if it would work in your laptop to Mr. However, in case this would not work, contact the ASP from Toshiba for help

  • Toshiba A60 starts not (black screen, no BIOS, no HARD disk)

    Please help me, there is no toshiba dealer in my country and my laptop has not started; I don't know what to do.

    Hi, Naj,

    You simply turn on one day and it did not? Not even (In Touch With tomorrow + Intel Inside) Welcome screen appear? What indicators (battery, HARD/CD/DVD disc, power) and the light around the button? I'm curious because you did not say much.

    András

Maybe you are looking for