Satellite U200: DVD - ROM does not work correctly

Similar Questions

• Satellite A30 - CD-ROM does not work correctly

  My CD ROM is not working properly because the drivers corrupt. I tried uninstalling etc. How to load new drivers or even reformat from the recovery disk when the CD-ROM drive does not work?

  Looks like catch 22. Someone at - it help him?

  I agree with Maurice. If the drive can read a recovery media or any other bootable media there must be a hardware problem and I assume that the optical disk drive is defective.

• Satellite A200 DVD-ROM does not work

  I received an error code 39 for my dvd device. The device driver and software are installed ok. I do not have the technical specification, so I don't know what code eror 39 is.

  Hello

  The error code 39 is very similar to error code 31.
  This code is known to me. I saw this question here in the forum from time to time.

  The solution is very easy! remove the upper and lower filter registry ;)!

  I found this Microsoft Knowledge base article that provides the details and the solution:

  Cannot access CD-ROM and Error Message "Code 31" in the device after Manager removed Adaptec Easy CD Creator on your computer
  http://support.Microsoft.com/kb/270008/en-us/

  Please follow the guidelines and the report if you did!

  Good bye

• My CD-ROM/DVD-ROM does not work

  My CD-ROM/DVD-ROM does not work.  Manager of devices display a "!" on the Optiarc DVD RW AD - 756 A ATA DEVICE.
  1 device state poster (this device cannot start. (code 10)).
  2 update driver... shows that the best device driver software is already installed.
  3. it is the driver of manufacturing.
  4. I tried the microsoft fix it downloads and it has not solved the problem.

  Hope that enough information... Oh, my computer is computer laptop HP Pavilion G60-231Wm.

  Grateful for any advice...

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I have a computer running VISTA. The CD-ROM/DVD-rom does not work and can not read the CD of the program that I placed in it.

  It won't read a DVD.  It will not read ANY CD or DVD.  I tried 12 different CD/DVD.  This isn't an upgrade to Vista; the computer came "made for Vista" with Vista installed on it.  I had added Nero.  I removed Nero.  I did all the updates. I have not released the driver and reinstalled.  He claims to have the latest driver software, but it won't work.  The computer can see the CD/DVD, but he calls it a 'CDROM '.  It is not the case.  It is a DVD/Cd-RW with Labelflash.

  I did everything suggested that past discussions.  I ran FIXIT program that claims that the drive works properly.  It is not the case.

  I tried to get various programs to recognize.  They cannot see the installed media.

  I uninstalled iTunes.

  Please do not give me the answer of cut-and - paste stock; It does not work.

  Please tell me what to do to make Vista see the media inserted in the CD/DVD-RW drive.

  Thank you.

  Hello

  Well, if you have tried all the usual bugs try this:

  Make a Restore Point:

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ------------------------------------------------

  Then go to right click on UNINSTALL - - CD/DVD - Device Manager CHECK THE DRIVERS to REMOVE and
  continue.

  Reset.

  Occasionally, install an upgrade or a re - install will fix the problem and of course the drive or other hardware issues
  could be at stake.

  =====================================

  Here's the answer, just in case there is something you don't have, and I start up and down.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable
  or slight corrosion on the contacts (usually for a laptop) and other issues.
  

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===========================================

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• On Satellite L500D DVD player does not work - Code 39

  my dvd driver does not work it says driver may be corrupted or missing (code 39) I got it 3 days new

  read here:

  http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

• Satellite L650 - DVD player does not work and not visible in my computer

  Hello

  recently, I noticed that my dvd on my toshiba drive does not work.
  This isn't even apper in the 'My Computer' folder.
  And when I put a cd or dvd in the drive, it does nothing... Here is the screen of "My computer":

  http://img267.imageshack.us/img267/8458/31854306.jpg

  He had previously worked, but I don't use dvd for a long time player and when I tried yesterday it did not work...

  Hello

  You need to remove the upper and lower registry filters.
  But before doing so, please remove the CD/DVD drive in Device Manager.

  Then start the registry (regedit) and then remove the filters above and below this key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then restart the laptop

  I think this should help you

  Good luck

• New keyboard on Satellite L500 - 19 X does not work correctly

  Hello

  About a month ago, I spilled pepsi on my laptop and had sent for repair. I came home today and he had a new keyboard installed, among other things. But the new keyboard does not work properly.

  A bunch of key type is close to letters instead. For example, type 'a' gives 'aq1', 'b' gives 'bgt '. It seems to type the letters vertically above. Some work very well.

  Is the new defective keyboard, or is it need calibrated or something? My laptop model is L500-19 X.
  Thank you.

  My advice: don't waste your time on the forum waiting for help. How do give you the right answer to your questions?
  I have only one answer to your question: no, keyboard doesn t need to be calibrated.
  Contact the service provider as soon as possible and ask for help.

• Equium A100-299-CD/DVD-ROM does not work

  My CD/DVD-ROM on my Toshiba Equium A100-299 won't work, do you have any idea why?

  I tried to fix it by changing the IDE secondary channel IDE ATA/ATAPI in PIO Mode only, but it doesn't seem to work...

  I get famous I I/O-warning, whenever I try to open programs and DVDs on it. But it works when I put an audio cd...

  Hello

  If all goes well it s not a malfunction of the equipment.
  We should be optimistic ;)

  Check this box: go to the Device Manager and remove the drive from the device.
  After restarting again, the operating system should recognize and initialize the disk again.

  In addition, you can try to clean the lens gently and carefully, maybe it helps

• Satellite P30: Energy saving does not work correctly

  Hello
  I have a Toshiba Satellite P30 (with Windows XP) and I have problems with my energy saving mode. When I use it for games and other applications of high power, it gets really hot on the edge of the moitor and stops.

  Is it for the last month or two. Before that, it was absolutelly no problem. I checked the file TPSTrace and got this error message:
  A fatal error has occurred. The program will end. Code: 0x0 rental: MainFrm.cpp (1317)

  I do not know what to do with it and how to solve the problem. Any ideas?

  Hi Thomas

  It is not easy to give you an accurate diagnosis, but in my opinion your laptop isn't hot because of the energy savings. Satellite P30 is pretty old laptop and maybe you should clean your laptop.

  Have you done this before?

  This error seems to be serious and what you can do is to remove the preinstalled energy saver and after restarting try installing it again.

  Just FYI: Watch tool is very useful, but certainly not so important and your system can function very well without it. Because of this, I presume that portable hot is because of dust inside. With more CPU and activity hardware graphics card will be hot and must be cooled properly. If the cooling rack does not clean this cannot happen. Initially, notebook will be hot, but one day she is probably turned off without any warning.

  In the first trial step to clean your laptop and remove all the dust under cooling grill.

• My CD-writer/DVD-rom does not work and the door does not open

  I tried Device Manager and that will not be the same work, I disabled the drive once I discovered it did not work.  I have a Compaq presario XP sp3 with Internet Exporer 8 is possible that I can go back to IE 7?

  I tried Device Manager and that will not be the same work, I disabled the drive once I discovered it did not work.  I have a Compaq presario XP sp3 with Internet Exporer 8 is possible that I can go back to IE 7?

  Hey Craftslady2011

  Read below how to open the cd with a paper clip tray

  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  How to uninstall ie8 at the link below

  http://support.Microsoft.com/kb/957700

  and reading this on cd XP problems

  This article explains how to solve common problems that may occur when a Windows XP-based computer cannot read a CD or a DVD in a CD or DVD drive. This article contains several methods that you can use to try to solve these problems, and it also includes some advanced troubleshooting steps

  http://support.Microsoft.com/kb/321641

  Here is the vista forums

  for xp questions use the link below to the xp forums

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

  Walter, the time zone traveller

• DVD Rom does not work in the Dimension 2400

  I have a Dell Dimension 2400, operating on Windows XP service pack 3, him comes from the computer with a CD burner and I need to install a DVD player, so I bought a HL-DT-ST-DVD-Rom GDR8163B, I installed the DVD and the computer recognizes the DVD-ROM and device manager says it works fine.

  When I try to use the DVD to play DVDs or CDs, it starts to run, but slow, then after a few seconds it stops, if I go to my computer, the drive is there and if I click the icon it says insert the floppy, puppy little drive upward and then stops.

  I had also installed on this computer Sonic Record now Version 7, I removed that thought it might be in conflict, but no help.

  I tried the fix for WIndows to delete the upper and lower limits

  I was also told that the computer is old and she might need a firmware update or something?

  Can anyone help?

  Osprey, you reason the drive was bad, I went and picked up another drive today and it works great, thanks for all your help.

• Satellite A300-243: CD/DVD-ROM does not work after installing Win 7

  Good day to all!

  I have a huge problem with my CD/DVD room.
  I've updated my A300-243 Satellite with windows 7 and now I can't burn DVDs, CDs, the DVRW.

  But when I had Windows Vista everything was normal. What should I do?

  Post edited by: Qualy

  Hello

  I'm not sure if this will help but try this:
  Go to Device Manager and remove the drive from the list of devices CD/DVD.

  Then beginning of the registry (regedit.exe) and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  After this reboot of the laptop.

• Of Satellite A200 DVD burner does not work

  The engraver of DVD of my Satellite A200-130 is not written at all. He reads everything and plays videos but it will not write anything even if the program, nero works and displays a message saying "burn successfully the process" in particular, but when you try to read the disc, Virgin sound.

  Is anyone out there who has the same prob as me?

  need help...

  Try to use it with the Windows option. For data burning, you don't need additional software.
  Can you use the format option and clear the contents of the CD/DVD-R/RW?

• Satellite M30X graphics card does not work correctly

  The best I can describe the problem is that the display looks like he has a trellis in front of her.
  I connected a remote screen I know works fine and the problem is the same, so I'm sure that the problem is not the LCD display itself.
  Looks a bit like a screen of matrix of the film of the same name. I also tried to replace the motherboard, but the problem remains.

  The laptop itself works very well and always does everything its supposed to but the screen make it practically impossible to read.

  Any ideas?

  Unfortunately, it's really not easy to say what could be bad exactly.
  Maybe it's a problem of graphics card chip.
  According to your description this fault could be possible.

  Most of the time it s advisable to ask and laptop for an audit technician. He could run a diagnostic test and could locate the hardware failure more quickly.

  Sorry, but that's all I can suggest.