Satellite U200 Graphics Upgrade?

Y at - it no graphics card available for the Satellite U200 series ugrades?

Is impossible to pass the graphics card on all laptops. For the most part, these graphics cards are soldered to the motherboard and so not removable for a common user.
Only the memory and HARD drive are upgradable on the laptop.

Good bye

Tags: Toshiba

Similar Questions

  • Options for Satellite U200 RAM upgrade

    Hello

    I read a few posts here, but I'm a noob of material and you want to be absolutely sure I chose the right RAM module.

    I want to be exactly if the module I buy will work with my computer laptop u200 (especially not the damage, if that's even possible).

    I'm looking at _Kingston 2 GB 200 pin PC2-5300 DDR2 SODIMM_

    Found here:
    101436 http://www.FutureShop.ca/catalog/prodDetail.ASP?logon=&langid=en&sku_id=0665000FS10 & catid =

    Please let me know if you need more details.

    Thank you!

    Hello

    According to specification for laptop, your laptop uses the module DDR2 - 533 MHz RAM. There's Kingston 667 MHz, but it will work on your laptop without problem.

    So, but there is something else: I don't know which U200 you but it seems to be that your laptop can be upgraded up to 2 GB max. So, in my opinion, you should buy two 1 GB Rams. If you want to buy tested one, to check for the DDR2-533 1 GB with PA3411U-2M1G part number.

  • Upgrade memory for Satellite U200: are supported with 667 mhz modules?

    I am a new user and I'm on a Toshiba Sat U-200-115. I want to upgrade, and I intend to do an upgrade to 4 GB.

    What I want to know, although it said this laptop supports the upgrade to 4 Gig, but this model use a DDR2 533 MHz memory. Considering that since the Web from Toshiba site, I see only 1 slot memory of Gig available with this clock speed and a 2 Gig DDR2 available with clock speed of 667 MHz. What I want to know, if I want to upgrade to 4 GB memory with clock speed more high clock (667 instead of, 533) would work on this machine?

    Thank you.

    Hello

    It depends on the chipset of your Satellite U200-115.

    If chipset supports 4 GB of memory and BIOS and Vista supports 4 GB of memory too, then you can go use the full 4 GB of RAM.
    If the FSB takes care also of 667 Mhz then modules of memory would also go wit full 667 Mhz speed.
    If the chipset supports only 533 Mhz then the chipset would slow the 667 Mhz module and memory would go only to 533 Mhz.

    So what you have to do is check what chipset is equipped in the U200-115.
    Full details and specifications of chipset you can find on the page of Intel.

    But generally, there is no big difference between the modules of 533 Mhz and 667 Mhz modules 667 Mhz turns a little faster but you won't see everything boosts performance

    Concerning

  • Re: upgrade memory on the Satellite U200

    Where is the memory located on this model that cannot see with any panel removableable?

    Ta

    Do you mean the Satellite U200?

    The RAM slots are placed under the keyboard. You must remove the keyboard (between the keyboard and the LCD) support, remove the screws that attach the keyboard and then remove the keyboard.
    On the right side are the memory cover and the RAM slots.

    I have no experience with disassembly laptop, go a local ASP and ask a technician for help.

  • Satellite U200 - 181 built-in HDD ERROR

    "Toshiba Satellite U200-181", I bought 2 weeks ago. Recently (2-3 days ago) I have problem with built-in HARD drive.

    So the problem is that sometimes I get the "Built-in HARD drive ERROR" message when starting the laptop. This integrated "Disk ERROR" message appears from time to time and the system shuts down the HARD drive starts, but can start from other bootable devices. First time where the built-in "Disk ERROR" message took place, he was accompanied by a lot of strange pop sound beating from the inside of the laptop. All others

    "HARD disk ERROR" messages were not so strong and strange beating pops, but always with some pop sounds (not as strong as the premiere).

    To identify possible problems, I saved S.M.A.R.T. data log (see annex 1).

    Additional information: after I bought the laptop I ve made successful update BIOS version 1.40 version 1.50 strictly according to Toshiba site official instructions. After BIOS upgrade system works well, no ERRORS, no exceptions. But 3 days ago I received the message"built-in HARD disk ERROR '."

    Any ideas? Thank you.

    : #1

    ================================================== ==========
    This folder made by Active SMART
    http://www.ariolic.com/activesmart/
    ================================================== ==========

    S.M.A.R.T. status
    Date: 2007-01-18 20:05:32

    Model name: HTS541080G9SA00
    Serial number: MPBDL0XKKE3RBG
    Capacity: 80.0 GB
    Firmware: MB4OC60R
    Drive interface: IDE
    Current temperature: 35 ° C (95 F)

    ------------------------------------------------------------------------------------------------
    The name threshold value worst raw attribute value
    ------------------------------------------------------------------------------------------------
    1 (01) raw Read Error Rate 62 100 100 0
    2 (02) flow Performance 40 100 100 0
    3 (03) spin Up Time 33 253 253 55834574849
    4 (04) start/Stop Count 0 100 100 363
    5 (05) reallocated sectors count 5 100 100 0
    7 (07) seek error rate 67 100 100 0
    8 (08) seek Time Performance 40 100 100 0
    9 (09) hours powered 0 100 100 194
    10 (0a) Spin Retry Count 60 100 100 0
    12 (0C) device Power Cycle Count 0 100 100 256
    191 (BF) G-sense Error Rate 0 100 100 0
    192 (C0) stop retract Count 0 100 100 5177348
    193 (C1) Load/Unload Cycle Count 0 100 100 4300
    194 (C2) 0 157 157 231929348131 temperature
    196 (C4) reallocation Event Count 0 100 100 0
    197 (C5) current pending sector Count 0 100 100 0
    198 (C6) incorrigible sector Count 0 100 100 0
    199 (C7) Ultra DMA CRC Error Count 0 200 253 0
    ------------------------------------------------------------------------------------------------

    To my knowledge, the error sometimes because the BIOS can not find the HARD drive as a source of start-up. Perhaps because of the loss of connection or / and a malfunction of the HARD drive.
    Hmm, have you checked if the HARD drive is connected properly?
    The losing may be a strange reason for the beating POPS.

  • Satellite U200 - questions on the screen refresh rate

    Satellite U200-148 WINXPHOMESP2
    Card video Mobile Intel (R) Express Chipset Family 945GM
    Amount of video memory 128
    Accelerated Graphics Port - it's inaccessible
    The screen 60 hertz frequency
    Questions
    (1) accelerated Graphics Port - it is enabled if so that it is necessary to make it became accessible.
    (2) the question whether with 60 hertz frequency can be increased up to 75.

    Hello

    I noticed that on some computers laptops Toshiba, the screen refresh rate is fixed on 60 Hz.
    The screen refresh rate is not important on laptop screens.
    Matrix TFT is not such a thing as the refresh rate. It is not blinking.
    TFT as all other LCD screens do not refresh rate setting, only the reaction time.
    Your eyes are sure ;)

    PS: as much as I know AGP port is not available.

  • Satellite U200 with Win XP - utility to change device display does not work

    Hello

    I think there was nothing wrong with its installation since I encounter the same problem.

    New installation of win XP on a satellite U200 Pro.
    Windows XP Home edition upgrade to sp3 immediately. Then downloaded all the drivers based on serial number of the toshiba Web site and then installed in the same order as shown in the list of installation but I get the same error as sjoemie1 when I tried to install "hotkey to display" etc.

    SOMEONE KNOWS HOW TO REINSTALL THESE TWO FILES?

    Hello

    The v6.05.00 of the common Modules for Win XP should be installed in the first place.

    In addition, there are two tools called

    * Utility Hotkey to display v3.4.4.1 - XP devices *.

    and

    * View edit the v2.3.0.0 device *.

    The two part of the software allows you to display on screen LCD LCD + CRT or CRT mode by pressing Fn + F5

    So if you have problems to install the first utility, forget it and try another.

  • Problems with external monitor and the Satellite U200 - 10 d

    I have a Satellite U200 - 10 d running Vista Business Edition. When I attach an external display screen flickers (horizontal lines on the screen)... It's worse when you move the mouse on the screen. The monitor on the laptop is fine I just have problems with the external display.

    The screen that I is a model VG1930WM viewsonic (widescreen) here is the specs of res for this screen...

    PC VGA up to 1440 x 900 non-interlaced
    Analog analog/digital RGB (75 Ohm, 0.7 Vc - c) / DVI - D

    Anyone have any ideas? I checked the graphics driver for vista and this is the latest version...

    HM, it's a nice solution, I have a friend with a similar problem.

    We will try your suggestion, snipe and perhaps give feedback if it worked for us.

    Welcome them

  • Support of button does not work on my Satellite U200-128

    Guys I need help. Support of keys still does not work on my Satellite U200-128. I installed the correct PVAT for that I downloaded on the site Web of Toshiba. Also the FN key doesn't work dimmer.
    I have tried to register using the button for his actions, but still don t work.
    Can someone shed light on this? The original operating system for my laptop is XP which I've upgraded to Vista. I installed the version of PVAT vista on my laptop already.
    Help, please! :(

    Hello

    At first, I have to say that I believe you have Satellite Pro, but not satellite model. So the question is: have you really downloaded material for your laptop model.
    As I see you have Satellite Pro U200 with model PLUA1E number. Right?

    In any case, on the Toshiba download page there not many things that must be installed for Vista. I just hope that you have installed all in the order of good facilities.
    Please try to restart Flash cards one again. You can do this at the start > all programs > Toshiba > utilities > restart flash cards.

  • Satellite U200-122: how to use Pivot on external monitor?

    I have a Satellite U200-122, wishes to use the external monitor depending on pivbot.
    But I can't find where I can get the display to rotate, so that it will be displayed on the external monitor in portrait format and accept the resolution 1024 x 1280.

    Any ideas?
    Graphic driver: Intel 945GM express Chipset

    Thank you
    Isabel

    Hello

    Have you checked the Panel-> graphic Manager Intel?
    Usually, it takes an option which allows you to rotate the screen.

    There are also combinations of keys that should work too:
    Turn to normal: CTRL + ALT + UP
    Rotation 90 °: CTRL + ALT + LEFT
    Rotate 180 degrees: CTRL + ALT + DOWN
    Rotation of 270 degrees: CTRL + ALT + RIGHT

    Check it out

  • Satellite U200 - 1920x1080@64Hz on the external LCD screen resolution problem

    I am the owner of a SATELLITE U200 and I would use it with an external LCD display.

    The external monitor supports up to 1920x1080@64Hz.

    When I select the 1920x1080@64Hz option in the properties of the screen, I get an image enlarged and out of range of the scale. However, by selecting 1400x1050@60Hz seems to work very well.

    My question is: is there anyway I can get the 1920x1080@64Hz option working properly?

    Some info about my following system:

    Version of the OS Microsoft Windows XP Professional 5.1.2600 Service Pack 3
    Version of the BIOS Version 3.70
    Video Mobile Intel (r) Express Chipset Family worm = 6.14.10.4631 945GM (* even if intel provides versions of this driver newwer, this is the last custom by toshiba *)

    Intel(r) Graphics Media Accelerator Driver for Mobile report

    Report date: 13/03/2009
    Report time [hr:mm:ss]: 11:24:18
    Driver version: 6.14.10.4631
    Operating system: Windows XP * Professional, Service Pack 3 (5.1.2600)
    Default language: Spanish
    DirectX * Version: 9.0
    Physical memory: 1015 MB
    Minimum graphics memory: 8 MB
    Maximum graphics memory: 128 MB
    Used graphics memory: 14Mo
    Processor: x 86 family 6 model 8 Stepping 14
    Processor speed: 1828 MHZ
    Vendor ID: 8086
    Device ID: 27A 2
    Revision of the device: 03

    _Accelerator Information_
    Accelerator in use: Mobile Intel (r) Express Chipset Family 945GM
    Video BIOS: 1358
    Graph current mode: 1920 x 1080 True Color (64)

    Connected to the graphics Accelerator_ _Devices
    Active monitors: 1
    Active screens: 1

    _Monitor_
    Name of the monitor: Plug-and-Play monitor
    Display type: analog
    Gamma value: 2.20
    DDC2 Protocol: support
    Maximum Image size: Horizontal: 20.0 inches
    Portrait: 11.0 inches
    _Monitor Modes supported: _
    640 x 480 (60 Hz)
    640 x 480 (67 Hz)
    720 x 400 (70 Hz)
    800 x 600 (56 Hz)
    800 x 600 (60 Hz)
    1024 x 768 (60 Hz)
    1024 x 768 (70 Hz)
    1152 x 864 (75 Hz)
    1280 x 1024 (60 Hz)
    1280 x 1280 (60 Hz)
    1440 x 1440 (60 Hz)
    1920 x 1080 (60 Hz)
    1920 x 1080 (64)

    _Display power Management Support: _
    Standby mode: not supported
    Standby mode: not supported
    Active off the coast of the Mode: supported

    _Notebook_

    Name of the monitor: Plug-and-Play monitor
    Display type: digital
    Gamma value: 3.54
    DDC2 Protocol: support

    _Maximum image Size_
    Horizontal: Not available
    Vertical: Not available

    _Monitor Modes supported: _
    1280 x 800 (60 Hz)
    Display Power Management Support:
    Standby mode: supported
    Standby mode: supported
    Active off the coast of the Mode: not supported

    Thank you in advance!

    It s nice that your monitor supports the screen resolution 1920 x 1080, but you should check your owner's manual.

    On page B-4, you will find a list of the supported screen resolution and I must say that the resolution 1920 x 1080 is not taken in charge.
    You can select 1920 x 1440 but not 1920 x 1080.

    Sorry, but the material doesn't supports his screen resolution.

  • Satellite U200 - 10 H - how to use the screen resolution 1600 x 900?

    Hi all.

    I have a Toshiba Satellite U200 10 H. Recently, I bought the Samsung SyncMaster 2033 1600 x 900 monitor.
    The graphics card doesn't support 16/9 1600 x 900. I insall alternative graphics (intel gma 945) driver ([http://www.intel.com/support/ru/graphics/sb/cs-028366.htm]), but it did not help. Now on toshiba 1440 x 900 necessary 1600 x 900. Help, please!

    Features of the laptop; Win XP Professional
    graphics card; Intel gma 945
    monitor; Samsung 2033sw 1600 x 900

    Hello

    In the worst case the screen resolution is not supported :(

    But you can check the following:

    Go to settings of display properties (right click on desktop > properties > settings). Click Advanced, and then select the monitor tab. * Uncheck * the box Hide modes that this monitor cannot display.

    After this check again the screen to external monitor resolution.

    I hope that helps! :)

  • Satellite U200 - 10 H PLUA0E recognize only 3, 2 GB RAM - 4 GB installed

    Satellite U200 - 10 H (PLUA0E) a maximum of 4 GB RAM expansion, 945GM chipset.
    This model has 2 slots for memory and each unit of memory 2GB of suppor slot.

    I have install 2 + 2 GB: BIOS correctly detect memory
    Diagnosis Mode and OS, detected only 3, 2 GB :(

    I know about 2 GB limit but can I change something (BIOS upgrade or LIKED) to change this limit?

    Why the BIOS can detect 4GB?
    Deadline is - what chipset?
    Can I fix it and what I should do?

    This is a really easy thing to explain. You are using a 32-bit version of Vista or XP, which can only, because of its use of architecture 3, 2 GB of ram maximum.
    To use all of your 4 GB, you will need to install an operating system 64-bit, like Vista or if you dare a 64-bit version of XP.

    BIOS can detect all the 4 GB because the hardware supports it, but windows or your tools diagnostic steps, due to limitations of 32 Bit OSs.

    Get a 64-bit operating system, and you can use it.

  • Satellite U200 - sound does not work after the installation of Win8.1

    Hello guys,.

    I have some old Satellite U200-165. I installed windows 8.1 Enterprise assessment successfully after that I changed the hard drive SSD, but the sound does not work. Windows showing that his work perfectly, but it does not come out.

    An advise please.

    Satellite U200 is a pretty old and not supported for Win8 or Win8.1 machine. I think that we have no report on this forum how this old piece of equipment works with Win8.

    If the sound card is properly installed, have you checked all the sound settings?
    I presume that the same problem is with a headset, right?

  • Windows XP drivers x 64 Edition for Satellite U200-181

    Hi all
    I installed XP x 64 edition on top of my box Satellite U200-181.
    I'm in trouble, looking for drivers for sound, modem, bluetooth stack and modules of the fingerprint scanner.
    Anyone who guide me on where can I get the x 64 drivers will be appreciated.

    Altug

    Hello

    Unfortunately these drivers are not available on the Toshiba download page, but you can consult the site of material parts manufacturer.

    BT stack, you can download under http://aps.toshiba-tro.de/bluetooth/ > download > Windows XP x 64 / Windows Vista x 64 > version 5.10.01

    Sound card is: AD1981HD
    For other things to two, you can have problems. Check on Google for modem (Modem Chip Scopio - Agere AC 97/HD).

    Sorry, but everything what s that I discovered.

Maybe you are looking for

  • during the passage of the identities in outlook express 6, which a window opens saying that she has encountered a problem and needs to close.

    The error report is the following AppName: msimn.exe AppVer: 6.0.2900.5512 ModName: vroe_toolbar.dll ModVer: 2.0.7.0 Offset: 000f0017 Anyway to stop this?

  • BES and KeyInject

    Hi all. Can you explain (or link) what is all this fuss around BES and KeyInject. I develop an application and have tried to avoid KeyInjection because I heard that BES has some problems with it. But, alas, I'm afraid that I can't avoid it in one pla

  • Cisco router: RV110W

    I am installing a Cisco RV110W router in my network, currently I have a service contract with TalkTalk broadband, which uses PPOA to connect to the internet. They advised me to put the router in that had mode bridged, what I've done. Te router that t

  • Windows Live Mail is unable to send/receive messages

    I just bought a computer Windows 7 and downloaded Windows Live Mail - but it seems to be missing some very basic features. I can't find any way to press a button and send/receive mail and cannot implement the message rules. I read somewhere that WLV

  • traceroute pix 7.0 problems

    Hiya, I've updated to v7.0 (1) pix and after that, I had this problem can't traceroute out of my WAN connection. The pix connects to the internet and when I do a ping from inside outside external ip addresses, it works, but traceroute will be inacces