Satellite U200 - touchpad no longer works

Similar Questions

• Satellite C55 - Touchpad no longer works

  Hello

  The touchpad on my C55 no longer works.

  After you restart the touchpad works until I signon to Windows. After this, all functions will stop.

  A few days ago, I think that some Windows updates have been launched.

  Is that what someone else has had this problem and can you give me a solution please?

  In addition, immediately after the entrance to Windows, it works always, but after a while, he stops. This rings a Bell?

  The driver for the touchpad seems to be ok.

• Satellite A300 - Touchpad no longer works after update BIOS

  Hello

  After the upgrade of the bios of my Satellite A300-1NJ version 1.70, the Synaptics touchpad stopped working at all!
  (I tried with ubuntu liveCD check is not a driver problem)

  Older bios is no longer available from Toshiba Web site!

  How can I solve this problem?
  And thanks for the help.

  Hello!

  The touchpad can be validated with FN + F9.
  Check it!

  In addition, try to use an external mouse. It work?

  Good bye

• Satellite C50 - touchpad no longer works

  Hello.

  Can someone shed light on why my mouse touchpad and buttons should stop working?

  I have a wireless external mouse plugged in via USB but still since the purchase.

  I lived all the settings and it has not been changed when OFF another device in use, so I am confused.

  The control panel tells me it works correctly, but Oops, what it is not!

  > I lived all the settings and it has not been changed when OFF another device in use, so I am confused.
  Maybe the touchpad has been disabled?
  Have you checked if you can activate the touchpad by using the key combination FN + F9 (on some models, this function has been replaced by FN + F5)?

  You can also go to Panel of-> mouse-> device settings tab
  You will find a pointing device option disable internally called when an external USB device is attached.
  Make sure that the option is disabled.
  Details: http://aps2.toshiba-tro.de/kb0/HTD3101Z30000R01.htm

  In case this does not help, I recommend reinstalling the touchpad driver

• Satellite C70 - A - 15 d - Touchpad no longer works

  My touchpad no longer works. Windows 8.1.

  New drivers can not be installed. MOMENTUM: error message bad touchpad. Synaptics: obviously empty zip file after downloading.

  Any idea where I can get the zip file of work?

  Are there function keys that enables / disables the touchpad?

  Thanks for the tips!

  + The message was edited: model number added to the object.

  many answers but we cannot reply if we do not know what model of laptop you have, so please the exact post model name of your laptop by Satellite.

• Touchpad no longer works after update BIOS on Satellite A500-1GL

  Hello world

  I just bought my laptop Satellite A500-1GL today. I started at the top and plays a bit (nothing serious). The touchpad worked very well at the moment.

  Then I discovered this tool to update the material and the update of the BIOS that worked without any problems. After I restarted the laptop, BIOS, loaded the default values of the installation and recorded.
  After that Windows 7 (x 64) started the touchpad no longer works...

  I downloaded the driver here and installed again once, still does not. I went into the BIOS, disabled the touchpad (I thought that maybe it's a bug...) and started again. It still does not...

  I enabled it again in the BIOS, tried to push the function + F9, but it still does not... Finally, I used the recovery and installed a Windows 7 costs.
  But unfortunately it still doesn't.

  Now, I'm out of ideas, can anyone help?
  Is there a chance to get the older version of BIOS to downgrade it?

  Thanks in advance ;)

  Hello

  It seems strange that after update Bios touchpad no longer works.

  > Is there a chance to get the older version of BIOS to downgrade it?

  To be honest, I don't know where to find. In any case, do a search on Google. Perhaps, other users of the forum can give you a link to download.
  The downgrade of the Bios is riskier upgrade procedure. So, be careful the next time...
  Advice for the future; Do not touch the running system.

  Good luck!

• Satellite A350-212 - touchpad no longer works

  Hi all, I have some problems with my FN keys, my touchpad no longer works, in addition to this, when I press the FN key, I don't see any icon on the top of the screen... Two days ago, all this did not work properly... An error is given by the program called Tossiba assist, its written exactly this way: this system cannot use accessibility... Could you please help on this issue?
  My operating system is Windows vista 32-bit (service pack 1)

  Finally, sorry for my English if I make mistakes, it is not my mother tongue...

  Thanks in advance

  Try to restart flash cards.
  Start > all programs > Toshiba > utilities > restart Flash Cards

  After doing this press FN button several times to see if Flash Cards are still on the top of the screen.
  If you see Flash cards again use the FN + F9 key combination to activate the touch pad again.

• Satellite A350 - Touchpad does not work, but an external mouse works

  Satellite A350 Touchpad does not work ok (unstable system and left button not loaded).

  I tried to make the driver but nothing. No problem drivers (conf system). I have the driver for the touchpad stroped and with an external mouse everything is working properly.

  What should I do? Don't you think it's hard or soft the problem. * The touchpad is NEVER worked.*

  Thank you, and sorry for my bad English. :-(

  Hello!

  The touchpad does appear in Device Manager or you have here yellow exclamation points?

  Like Akuma says you can enable or disable the touchpad with FN + F9 key combination.
  Did you check that?

  In the worst cases, you must go to an ASP. It seems to be a hardware malfunction, and this must be checked by a technician of the laptop. Here, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• Satellite A200 - touchpad does not work properly

  Recently bought a computer laptop a200 toshbiba of second hand and the touch pad for the frist week or two worked very well.
  And then began to get hard to use, as lethargic, now it wont even move at all.

  I reformatted computer and who did not.
  So I think the touchpad itself may have disappeared?

  Any suggestions and if yes, how would a new touchpad?

  see you soon
  mast

  Hello

  You mean that the touchpad no longer works?
  Have you used the Toshiba Recovery disk to recover the device?

  You use the latest version of the BIOS?
  Please check this and if the latest BIOS if available, please update this

  Well, it could also be a hardware problem
  And in this case, the touch pad needs to be replaced

  It is delicate and must be done by an ASP (partner) in your country

  PS: the touchpad can be ordered as a local ASP.

• Satellite M70: Battery no longer works

  My brand-new satellite M70 battery no longer works. I haven't used the phone for about a week and when I tried to start it (on drums), he did nothing. The battery was still charged (63%) I need to connect the power adapter to make it work.

  During this time the battery LED is still orange. Battery is not charging, the battery remains at 63%. I tried to remove the battery for a while and put it in, but that does not change...

  How can I solve this problem?

  Hello

  Maybe the battery has a malfunction. It would be very interesting to know if this problem occurs after the replacement of the battery.
  According to your assignment the guarantee must be valid, that the battery replacement should be done for free.
  I recommend to contact Toshiba service partner in your country and seek help guys.

• Split 13 x 2 touchpad no longer works

  I have a new split of HP 13 x 2. The touchpad no longer works. This is the latest driver Synaptics Touchpad (17.0.10.9). I'm under WIN 8.1. I have to close the session and then again for the touchpad to start working again. Any suggestions?

  Took a little digging on the forum but found this solution that worked for me in solving the touchpad freeze problem:

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/split-X2-touchpad-problem/m-p/3361845#M48265

  Hope this works for you.

• Touchpad no longer works after the clean boot

  Own, I started my laptop today, following the steps on http://support.microsoft.com/kb/929135. After the first reboot in clean boot my laptop touchpad scroll bar stopped working. I can now scroll using only the arrow, or quiet mouse clicks on the arrows at the end of a ScrollBar to the screen. In addition, I can't select any text with my touchpad now. All this happened after the boot process. What has gone wrong? How to fix?

  Original title: scrolling Touchpad no longer works after the clean boot

  Hi lauranne.

  What is the brand and model of the computer?

  I would like to put the computer into normal mode and check if your able to use the touchpad.

  See the section "How to reset the computer to start normally after a boot minimum troubleshooting"

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  If you still have questions, please refer to the article to give below, and follow the instructions.

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-in/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you more

• Satellite U400 - 10L - touchpad no longer works

  Suddenly, my touchpad doesn't work.
  Any suggestions that might help with this problem?
  My laptop is Satellite U400 - 10L

  Hello

  I think that you should first check if the touchpad is not disabled.
  Check the FN + F9 key combination.

  If the touchpad still does not work, try reinstalling the driver for the touchpad.

  Welcome them

• My Satellite Pro A200 (PSAE7E) touchpad no longer works

  Dear Sir.

  My problem is my touchpad does not work, I usually enable it or disable it in a tab to hide automatic at the top of my desk (which was disappeared after I updated to Vista SP1), after that and accidentally stopped the pointing device driver,

  I tried to re - install again but I could not find out who the good driver for my laptop is (ALPS Synaptics pointing device or pointing device)?

  I tried to press FN + F9 key but I had no change that the touchpad is not working, so I have to use a USB mouse...

  Can you help me please

  Note that I'm using Windows Vista Business SP1, Toshiba Satellite Pro A200 (PSAE7E)

  Thank you very much

  Zaid

  Have you checked the Device Manager? Normally, you should see what touchpad you have exactly.
  So the latest driver, you can download the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online support & downloads-download drivers online

  Check it!

• Satellite M70 PSM73C - touchpad no longer works

  For some reason any my touchpad isn't working.

  After trying unsuccessfully to get it working again, I found the software installation driver (tpdrv-xp - 603056.zip) on the Toshiba site.
  I thought I would uninstall and reinstall to fix the problem, but when I try to start the installation I get the cryptic error messages.

  The shield of the installation does not work yet.

  Anyone who has had success or knows how to get this software to install the touchpad?

  Thank you.

  What error message you get exactly?

  To reinstall or update the driver for the touchpad, you should delete the old first in Add/Remove Programs, restart your computer and install the new version from the Toshiba site.

  Check this box and post your result.