Satellite U300 - 13K usb 2.0 camera Chicony driver will not install on vista 32

Similar Questions

• USB 3.0 AMD host controller driver will not install.

  The USB 3.0 AMD host controller driver will not install.  He would then set I uninstalled assuming that Windows would be updated and reinstall.  Now it will not reinstall.

  Any ideas?

  Hi Felix,.
  Thanks for the reply.

   
  Have you tried the methods suggested earlier?
   
  Refer to issues related to the printer:
   
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  Download and install the latest drivers for your printer from the manufacturer's website.
  http://support.Lexmark.com/index?page=answers&startover=y&locale=en&UserLocale=en_US&question=Lexmark+S410#2
   
  I hope this helps.

• Toshiba 1 TB usb 3.5 "external hard drive will not format

  Hi all, my Toshiba 1 TB external HARD drive has just arrived, was in FAT32 so told to format it. Started to format it in Windows Vista when all of a sudden the pc froze so he didn't finish. Now it doesn't let me format at all or to access. I tried to do outside of windows, but not joy. Is there a way I can work around this problem and it back on track? The HARD drive seems fine towers etc but leaves me any access. It shows in my computer.

  If I understand you as soon as the HARD drive is connected it is listed in Windows Explorer.
  What happen when you try to access it? Is there an error message?

• Satellite P200 - 1 d 0 (PSPB6E) - CD/DVD drive will not read a disc

  Hi all

  Given that I have uninstall powerDVD on my laptop and alcohol 52% of my laptop, I'm unable to read any disc DVD or HD-DVD

  When I insert a disc, the departure by car to analyze and scan again and a new analysis... some applications like IE are frozen during this scan, then after a few minutes it stops just analyzes the disk and adds nothing. Impossible to explore the disc, Device Manager indicates everhing is correct and up-to-date.
  I have try to uninstall the drive from Device Manager after the abolition of upper and lower filter keys registry, no effect on my problem.
  I have also try to reinstall "Hardware Configuration" and HD DVD player, but no results

  Someone has an idea or another trick to try?

  THX in advance for your help

  Have you tried different s CD/DVD in the drive?

  Maybe you should clean the registry because there might be hints of powerDVD. For this, you can use CCcleaner:
  http://www.CCleaner.com/

  What operating system do you use? Have you installed it the Microsoft disc or disc Toshiba?
  Make sure you have all the updates of Windows installed.

• Satellite P10: The drive will not burn DVD

  Hope someone can help me,

  I have a Toshiba Satellite P10 and have just received some photos software, burning
  But my drive will not burn DVD, I try with discs DVD - RW which must work my laptop.
  What is happening is when it comes of the burn on the part of the disk of the process he starts, but it fails.

  I tried to burn it with Nero, but even if I burn OK on any CD discs with this software it will not work on DVD discs. It's really annoying because when the burning process it fails so that it makes the DVD - RW disc seem curupt and then my drive has problems mounting the disc to try a deletion once more.

  I have the Nero log file failed
  Done if it's any help to anyone.

  A big thank you Michael.

  Hello

  What about different DVD media? Have you tested the media DVD-R or DVD + R common?
  Have you tried different brands of DVD?
  I can't give you a properly answer why the drive can't burn your DVD - RW, but to my knowledge not every media is supported by the player.
  So I think you should check different DVDs.

• My usb ports and cd/dvd drive will be does not automatically start when everything is connected on the

  My usb ports and cd/dvd player will not automatically start when something is plugged on them have to start manually.

  Hello

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  Follow method 2 in the link below and check if AutoPlay is enabled, a link: AutoRun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive: http://support.microsoft.com/kb/330135

  I suggest to fix the AutoPlay parameter by downloading the file below and check the results: AutoPlay Repair Wizard: http://www.microsoft.com/downloads/en/details.aspx?familyid=C680A7B6-E8FA-45C4-A171-1B389CFACDAD&displaylang=en

• Home surveillance camera kit, that will not work on Windows 7 OS. I have the following message: "DVR installation may not complete. Ox00000222 error code.

  I bought a home surveillance camera kit, that will not work on Windows 7 OS.

  I have the following message: "DVR installation may not complete. Ox00000222 error code.
  I really need to get this working on my computer. Can anyone help please?

  Contact the manufacturer of the camera to get their installed software.

• I just bought a Canon 7 d Mk2 but raw files will not open in Cs5 and Adobe Camera Raw 8.7 downloads will not install. What can I do?

  I just bought a Canon 7 d Mk2 but raw files will not open in Cs5 and Adobe Camera Raw 8.7 downloads will not install. What can I do?

  CS5 cannot go higher than 6.7. If your device requires a more recent version, download the free Adobe dng converter. You convert your RAW to DNG, which can then be processed 6.7 in camera raw.

• Satellite U300 - 13 M - port external monitor (VGA port) does not work

  Dear users of Forums from Toshiba,

  I have a problem with the VGA port. I use the Windows XP operating system. Laptop, do not display on an external monitor, I tried all monitors to connect to my office, but does not solve this problem. I also tried to reinstall Windows XP, once again, and nothing has changed.

  Please help me.

  Best regards, Elbrus

  Hello

  I guess that by Satellite U300 came preinstalled with Vista. Am I right about that?
  Anyway, if you want to use external monitor and switch successfully to him you must install the utilities and tools of Toshiba. There are several of them and allows you to use the FN + F5 key combination and move your desktop to laptop LCD display to the external monitor.

  Can you please tell me one thing: have you installed all the stuff of the Toshiba download page according to document Instructions of facilities?
  The configuration of the laptop is not known to me, but try please check the Intel properties and let me know if the external monitor is recognized in properties. Usually, you can choose to use the external monitor there.

  You can also start Toshiba HWsetup utility. There must be tab display. There you can also find an option to use the LCD screen + monitor at startup.

  Check it out please and post the results.

• Re: Satellite U300 - 153 (PSU30E) - updated after the BIOS, I can't install Vista

  I recently installed an update of the BIOS for the U300-153 from the Web from Toshiba website.
  Has been running Vista Ultimate at the time.

  From that moment I could not access my hard drive. Restart the BIOS upgrade, it would hang on to the Vista loading screen. I tried to reinstall Vista Ultimate, but it always freezes at the point "finish installation". Have not tried to install other operationg system.

  Help, please!

  Hello!

  Weird, but in my opinion, it looks like to what you have tried to install an incorrect BIOS for your laptop.
  Are you really sure that you have downloaded the BIOS for Satellite U300 PSU30E?

  In addition, I would try to load the default settings in the BIOS. Check it!

  Are you trying to reinstall Vista using Toshiba recovery disc or disc of Microsoft?

  Good bye

• Satellite Pro L650: cannot use Skype - cam and microphone are not connected

  Having problems connecting to Skype.
  It seems that the microphone and web cam are not connected.
  Skype self-test will not respond with the voice test.

  Hello

  Have you checked the Skype settings?

  There, you should check if the right microphone and the internal webcam have been chosen.

  By the way: is the webcam properly recognized in Device Manager?

  You can use the webcam using the preinstalled software webcam?

• PCMCIA card will not install on Satellite L30 - 10y

  Hi all

  I hope someone can help with this problem. I recently bought a PCMCIA card with additional USB ports for my laptop Satellite L30 - 10y. It works on Vista basic, anyway I shoved the card into the slot and let windows install the drivers, problem is it will not load I get an error message saying that the MDT-0002 device does not charge.

  Is it a Vista problem or Toshiba thing?
  Thanks for any help on this one
  Regards Ciaran

  Hello

  I doubt that it could be a matter of Toshiba.
  I googled a bit for this device MDT-0002 error, and this error using some PCMCIA cards on different laptops from different manufacturers under Vista OS.
  Someone said that the Pcmcia.sys (PCMCIA driver) must be updated.

  I also recommend to contact manufacturer of PCMCIA card support for more details on a few issues with the Vista operating system.

  Welcome them

• External DELL GP60N USB DVDRW drive will not play DVD

  Hello

  I have a new Dell Inspiron 3531 with Windows 8.1.  The laptop came with an internal DVD/CD drive, so I bought a Dell GP60N external USB DVD - RW Drive.

  When I put a DVD in the drive that the laptop recognizes it is there, but will not play regardless of how I set the automatic run settings.

  I also searched drivers see if mine was outdated, but not found to contribute to the situation.

  Any help from the community will be greatly appreciated.

  Thank you

  Heath

  Default Windows can not decode DVD video, so you will need some reading software...

  Usually, when you buy a DVD player/burner, you get with it, WinDVD or PowerDVD software for video playback and some other software if the device may also burn discs... UNLESS the material was an OEM version, which normally does not come in a box like the commercial version, then you normally get nothing...

  So for now the easiest thing is to connect the drive to the laptop and then insert a DVD into the drive. Go to the Explorer, and then right-click the DVD by selecting drive open. You should now see two folders AUDIO_TS and VIDEO_TS. This indicates that Windows sees DVD disc material correctly and that he also sees the files in the DVD itself... Nothing wrong up to now...

  Now, go into the VIDEO_TS directory where you should see a bunch of files, a bunch of. BUP. IFO and. VOB files. The. VOB files contain the video code CSS while the. IFO files contain orders for DVD to play appropriate video channel (flow). Normally, the. IFO and. VOB files will have an affair with some reading software and double click on the VIDEO_TS. VOB file will launch the player. If the player is associated. Can manage files IFO CSS encoded DVD, playback will begin and you will hear the sound and see some video... If you have a drive associated with these types of files, usually autoplay will kick and the reading starts automatically on insertion of the DVD in your drive... But if you double-click and there is no software associated with this file extension, so there is no software associated with these files and you can't watch your DVD...

  But as mentioned, Windows does not capable by default DVD playback software, so you will need to install a DVD playback software... One solution is to contact the company (Dell?) who provided the external DVD player and ask them why you do not have the comercial DVD reading and DVD software of engraving that you expected would come with your hardware, they can predict it you if she should have come in your package, or they will tell you where you can download it from...

  If they won't help or they say it was hardware OEM and that it did not come with software, then consider using VLC to play your videos, as the software is free open source of quality. This page explains how to use VLC to play DVDs in Windows 8... You can also use ImgBurn for burning CDs and DVDs (not blindly just click on the buttons of large download on this web site because they are advertisements for * you need not, simply the page to the section of news where you have a download link)...

• My camera SonyDSC-S85 will not connect to windows 7 said no driver available, why go to this if it does not support my equipment

  My Sony DSC - S85 will not connect to windows 7. He said no driver is available I can't believe what is happening simply because do upgrades of windows I yo buy all new appliances and video equipment.

  You're right - the site of Sony says that your camera is not supported under Windows 32 or 64-Bit 7. However there is a simple solution - take the memory stick in and out of the camera and a card reader allows you to transfer your photos to your PC.

  If your PC does not have a card reader, you can buy USB very cheap ones. Just make sure it's one that can read the memory stick into your camera.

• Multiport USB - C map update will not install

  I thought that I had the answer to this, but...

  I installed the update of the USB - C software shortly after its release. He reported "Successful Installation", but whenever I started the rMB there was a notification to install the update. A version check ( on a Multiport adapter update 1.0 - Apple Support USB-C ) revealed it had not updated.

  I finally read the instructions on the screen to start during installation and travels account that the adapter needed to be plugged in and connected to a power source. I did this and tried to new installation but still have the splash screen. I tried installing a second time and it finally worked.

  Hi there Michael Paine,

  It seems that the USB - C Update appears to install but you still have guests to update, and it has not actually installed. I'd start by starting in safe mode.  This erases some system-level caches and perform a disk check and repair if necessary.

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  From: try safe mode if your Mac does not start-up

  Then leave the mode safe mode with a normal restart and check if the driver is still installed, or if you can install it again correctly. If not, you should try to reset the PRAM and new test:

  How to reset the NVRAM on your Mac.

  If it still is not resolved then I would then reset your SMC and give it another go:

  Reset the management system (SCM) controller on your Mac.

  Thank you for using communities of Apple Support, all the best!