Satellite U300-144 does not come from the standby/hibernation mode

Similar Questions

• Satellite U300-13U does not start and the recovery disc fails to too much work

  Hi all

  I have the above computer (or should I say my wife) & it is nothing that a good pain since the first day we got it.
  I have had it about 2 years & had to reformat the HD at least 6-8 times using the product recovery disc as laptop starts.
  The laptop runs Vista.

  In any case, problem I have now is that new laptop does not start, but for some reason any product recovery disc also does not work...
  What I can do...

  I have read on various forums that it might work if I reformat the HD first using some s/w on a bootable CD but how / what S/W can I use...?
  The laptop has a SATA HD 160 GB installed. How can I check that it all works.
  I don't know if the current problem is S/W or related material...

  Toshiba has a utility that I can use...?

  Thanks a lot for all the help...

  John

  Hello

  What happened exactly?
  Do you receive error messages by using the recovery disk?

  Check if the HARD drive is OK! You can check in the BIOS.
  If the HARD drive is listed in the BIOS then the HARD drive and HARD drive found BIOS is not dead.

  Usually, you might start Notepad with the help of a Live disc for example Bart PE
  It s a bootable windows CD/DVD live

  http://www.nu2.nu/pebuilder/

  This can allows you to format the HARD disk, and then use the recovery disc!

• Sometimes I can't hear sound from my computer. Even if my volume is up its still does not come from the speaker.

  If I restart the computer I can hear again. But if I restart the computer again its not coming. It's so confusing? No one knows how to fix?

  NOTE * I have no uninstall or install the audio drivers.

  Hello

  Did you change to the computer?

  You can try the following methods and check.

  Method 1:

  Check if your headphones are configured to be used as a Communication device by default instead of the default device, or if the two devices are configured by default. If so, that the fault of headphones, so that Windows will only use when they are connected.

  Check volume settings.

  (a) right click on the speaker icon in the taskbar, then select volume control options.

  (b) click a checkbox on "all devices evolving sound.

  (c) make sure that you have "Default uncontrolled communication device".

  (d) place a check on the speakers and headphones.

  Method 2:

  I suggest you to return the item and check.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Method 3:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  See also:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• How can I re-download Acrobat? I have my serial number but the order does not come under the heading upward my story.

  How can I re-download Acrobat. I have my serial number but the order does not come under the heading upward my story.

  Hi Roger,

  You can download Acrobat from the below mentioned link:

  Download Adobe Acrobat products. Standard, Pro | DC, XI, X

  Kind regards

  Rahul

• I already bought the movie HD, 'V for Vendetta', before it came with "iTunes Extras" but my purchased copy does not come with the Extras. Is there a way to fix this without having to buy the movie again?

  I already bought the movie HD, 'V for Vendetta', before it came with "iTunes Extras" but my purchased copy does not come with the Extras. Is there a way to fix this without having to buy the movie again?

  I was told that movies in the iTunes Store can be changed to include "iTunes Extras" if originally it did not come with extras. But there is a catch you get just the extras if you buy just the issue for the first time. If you have already purchased it, your version may not have the extras. This means that if you want the extras, buy the movie again.

  If you now get the Extras will depend on what the movie studio did for example if they have updated the version you have purchased, or replaced by a new version (which will be treated as a separate purchase): buy and play movies with iTunes Extras - Apple Support

• HP Officejet 6700 Premium: Scan function screen does not come to the top when selected

  After updating Windows 10, the scan function when selected in the application wizard does not come to the top. Installed the driver updated, no effect.

  Hello

  Thank you for using the forum.

  You have downloaded and installed the FULL features of HP software?

  Here is the link for convenience:

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-6700-premium-e-all-in-one-printer-series-H711/4322971/model/4323605#Z7_3054ICK0K8UDA0AQC11TA930O2

  We suggest that you uninstall the current drivers before reinstalling the software downloaded full of features.

  Hope that helps.

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

• PC does not come with the CD to recover to the OEM of Vista Businese restore CD

  original title: PC does not come with the CD to recover to the OEM of Vista Businese restore CD (product key: )

  DEAR SIR/MADAM,

  RE: PC NOT EQUIPPED TO RECOVER WINDOWS VISTA™ BUSINESS OEM FOR MY LAPTOP HP-520 CD, AFTER PC PROBLEM AND MAY NOT RECOVER AND FIX IT

  I GOT CONTACTED MICROSOFT SINGAPORE OFFICE BEFORE BUT CAN t GET BACK RECOVER CD EVEN AGREE OF PAY SGD40 /-, SO I USE MY CD of VISTA STARTER USED to REVOCER MY HP USE URGENT, THE PRODUCT KEY ARE AS below: * * removed TOC * (), there INSTLLED on MY OTHER PC IN MY HOUSE BEFORE.

  PLEASE ME ADVISE HOW DID PAY A LOT OF MONEY FOR THE PURCHASE OF MICROSOFT LICENSE AGAIN AND AGAIN FOR MY FAMILY USE ONLY.

  WIN 98 FIRST VERSION, WIN95, WIN98 2ND VERSION, WIN VISTA BUSINESS OEM, WIN VISTA STARTER, WIN VISTA HOME PREMIUM VERSION ETC...

  MY PERSON FAMILY MEMBER ONLY 4...

  PLEASE HELP AND ANSWER, I WON'T USE MICROSOFT AS NO LICENSE USER.

  ALEXANDER TANG-SINGAPORE

  Please, do not type in uppercase.  It is considered "shouting" in the forums.  We already know your issue is important to you or you him would have not posted in the first place.

  Recovery discs are available for the copy of Windows installed initially on the computer.  Which edition of Windows is printed on the COA sticker on your computer?  You can order a recovery disc for this edition of the manufacturer of the computer.  If your windows is an upgrade, you will need to find the upgrade dvd.

• My Hp Pavilion laptop 2244sa g6 does not come with the product key for windows8. Is this normal?

  Hello

  My Hp Pavilion laptop 2244sa g6 does not come with the product key for windows8. Is this normal? I can't see it anywhere, should I worry?

  Some laptops, like my Envy 17-3002ea loan, have the certificate of authenticity Windows hidden in the compartment where the hard drive and the battery are.  First try.

  Other portable latest and which may include yours, have the Windows license key encrypted in the BIOS.  There is a thread on the Microsoft communities that verifies that. The thread is worth reading.

• I am trying to download Photoshop CC on my 2nd computer, but when the app download page, it just says: download undefined error.  It says charging but when I hit him, he still does not come to the top?  Any suggestions?

  I am trying to download Photoshop CC on my 2nd computer, but when the app download page, it just says: download undefined error.  It says charging but when I hit him, he still does not come to the top?  Any suggestions?

  Please see if the links here help:

  Download cloud creative to troubleshoot and install questions

  Guinot

• My C50 - B Satellite does not start from the HARD drive

  Details of the machine: -.

  Model number: PSCMLA-03F07Q
  Serial number: XE343127P

  Computer does not start from hard drive. No error message, just the start Toshiba at the end of self-test screen.

  Sometimes a reinstall of the operating system seems to correct the problem, but then he would go again, now the problem is consistent.

  I reduced the possibilities to a fault of BIOS, reasons.

  System boots from USB with no problems. Installation of operating systems is done without error. SMART hard drive data indicates a perfectly healthy hard drive. Memcheck will return no error.

  The obvious solution is to reload the BIOS, just reset it doesn't help. But that is the problem.

  1.4 BIOS update that the Australian site offers is a Windows program and the computer cannot start Windows.

  Obvious answer is to use a bootable USB key with an operating system 'live' on this issue, but all of these systems are Linux and the update of the BIOS is a Windows program. So much for smart solutions.

  Downloaded Bios version 1.7 of the European site but the iso inside the rar file is empty, 25 MB in size but nothing in there according to Linux. Tried to run his program on a Win7 64 bit computer and it returns an error that it could not find the correct iso file.

  I submitted a support request by email to Toshiba, but they believe that it could take three days to get a response, so I thought I would ask here as well. Can someone tell me please to a working copy of the latest BIOS update disk for a laptop Satelite C50 - B? Note: this model does not have a CD player so iso should be compatible with USB boot.

  See you soon,.

  Andrew.

  Hello

  From my experience that I n think that BIOS update is the final solution for you. When you set the default settings of the BIOS disk HARD appears correctly in the BIOS settings?
  HARD drive is also offered and listed as boot device when you enter in the start using F12 at startup menu?

  What happens when you start using recovery image installation created recovery USB key (I hope that you have created a)?

  Offer BIOS updates are versions of WIN and can be performed by running the Windows operating system.

• Satellite L40 - 14N does not connect to the WLan router

  Bought two portable Satellite L40 - 14N as Christmas gifts and one of them does not connect to the wireless router.
  Is the error that says "error message unknown" try please login again.

  The wireless network appears in the list of networks available with a strong signal. Notepad attempts to connect but the error 'wireless link failed for an unknown reason. " Made a comparison with the other laptop that works very well and the configurations appear to be identical!

  Tried it on wireless network from a friend with the same result. All suggestions, am pulling out my hair at this point.

  Seems to be a Vista issue.

  I found this article Ms knowledge base:
  http://support.Microsoft.com/kb/928233/en-us

  You need to add a value in the Windows registry.

  1. Click Start, type regedit in the search box, and then click regedit
  list programs.

  2. Locate and then click the following registry subkey:
  HKEY_LOCAL_MACHINE es\Tcpip\Parameters\Interfaces\ {GUID}
  This registry path, click the (GUID) subkey that corresponds to the
  Network adapter that is connected to the network.

  3. on the Edit menu, point to new, and then click DWORD (32-bit) value.

  4 new value #1, enter DhcpConnEnableBcastFlagToggle, then
  Press ENTER.

  5. right click on DhcpConnEnableBcastFlagToggle, then click on modify.

  6. in the value data box, type 1 and then click OK.

  7. close the registry editor.

  concerning

• Satellite U200 - sound does not work after the installation of Win8.1

  Hello guys,.

  I have some old Satellite U200-165. I installed windows 8.1 Enterprise assessment successfully after that I changed the hard drive SSD, but the sound does not work. Windows showing that his work perfectly, but it does not come out.

  An advise please.

  Satellite U200 is a pretty old and not supported for Win8 or Win8.1 machine. I think that we have no report on this forum how this old piece of equipment works with Win8.

  If the sound card is properly installed, have you checked all the sound settings?
  I presume that the same problem is with a headset, right?

• Why the Satellite L650-116 does not appear on the list of products?

  Why my notebook l650-116 does not appear on the list of products?
  It does not appear even with the auto detects the program located on the site.

  Hello

  I put t know what you mean?
  SATELLITE L650-116 is a European model for Toshiba laptop. But this L650-116 has been published for example in Cyprus.
  You can find the details on the Toshiba Cyprus page
  http://Toshiba.com.cy/pages/en/toshiba_products/laptops/satellite.php?prod=197&cat=2

  In addition the L650-116 belongs to the PSK1JE series if you need drivers, you must choose L650 PSK1JE

  Welcome them

• Satellite U300 - Windows does not start correctly

  My U300 Vista Home run came in a boot loop: Windows can not start correctly and makes me want to use repair system, which failed and just makes me want to stop the computer again.

  I've tried without success, but failure mode it no more. I have a product recovery CD, but the system does not start from him. When I studied at the start, I saw that the BIOS does not detect the optical drive.

  Help please! Thank you.

  Hi nonprofit.

  You could try to load the default settings in the BIOS. Maybe it will be reconigze the CD/DVD drive again.

  Otherwise I think that it of necessary to replace the defective drive. Then, you would be able to use the Toshiba recovery disc again. This will restore factory in a few minutes.

• different image does not come in the same row of datagrid

  Hello

  How should I change the script so I can load more then 1 img of the same line. I have also
  tried like that... but only the first image is to come in the two coloumn of the same rank... can someone give me idea to solve this problem...

  I used like that...
  myDataGrid.addItem({Feature:FeatureList[i],data:"tick",data:"wrong"});)

  
  but in the two coloumn of this line same photo 'tick' is coming, 'bad' pic does not come...
  Please give me an idea of what I can move forward in my project...

  OK, I think I finally understand what you're trying to do (I hope)

  Create two classes of "CC6CellRenderer" and "CC5CellRenderer" custom CellRenderer extend UILoader and implement ICellRenderer:

  package {
  
      import fl.containers.UILoader;
      import fl.controls.listClasses.ICellRenderer;
      import fl.controls.listClasses.ListData;
  
      public class CC6CellRenderer extends UILoader implements ICellRenderer {
          private var _listData:ListData;
          private var _data:Object;
          private var _selected:Boolean;
  
          public function CC6CellRenderer():void {
              super();
          }
  
          public function set data(value:Object):void {
              _data = value["CC6"];
              source = _data;
          }
  
          public function get data():Object {
              return _data;
          }
  
          public function setMouseState(state:String):void {
  
          }
  
          public function set listData(data:ListData):void {
              _listData = data;
          }
  
          public function get listData():ListData {
              return _listData;
          }
  
          public function set selected(boo:Boolean):void {
              _selected = boo;
          }
  
          public function get selected():Boolean {
              return _selected;
          }
      }
  }
  

  (The above is "CC6CellRenderer". Change all "nc6" to "CC5" to create "CC5CellRenderer").

  Then assign for these custom classes "Nc6" and "CC5: CellRenderer class

  ...
  var CC6:DataGridColumn = new DataGridColumn("CC6");
  CC6.cellRenderer = CC6CellRenderer;
  var CC5:DataGridColumn = new DataGridColumn("CC5");
  CC5.cellRenderer = CC5CellRenderer;
  ...
  

  Now you can assign your MovieClip in the library to the cells:

  myDataGrid.addItem({Feature:FeatureList[i],CC6:"tick",CC5:"wrong"});