Satellite U300: "an unexpected i/o error has occurred."

Hello

My newly purchased U300 worked fine, today would not start and is now indicating that an unexpected i/o error has occurred, with a code of 0xc00000e9

The message preceding that States that this may be due to recently responsible for hardware or software. Not apply.

Any help appreciated, thanks

Janie

Hello

These errors are often errors in registry. Could be caused by some software disk cleanup or somehing else who has access to the registry system´s.

The only option is to fix the system with an original disc of Windows Vista. If you don t have such a, then you will recover you the system because your registry database cannot be recovered, and the system must be completely replaced.

If you do not already have: backup your personal data... That's all

Greetings

Tags: Toshiba

Similar Questions

  • Satellite L300: Failed to retrieve - unexpected i/o error has occurred

    Help, please...

    I'm trying to restore the orginal through recovery process.
    After pressing F8 at start-up stage and chose to restore the system, he thinks about it, and then comes back with the following error;

    STATUS: 0XC00000E9
    INFO: An unexpected i/o error has occurred

    There is also an explanation it may be due to an external device that has not been properly disconnected or a hardware error.

    I have nothing plugged and restarting the system several times to try to resolve the problem. I also tried to re-boot last secure configuration, but this has not helped (although now gave me my card back like this so that other issues have been a problem - that is why the desire to recover the original system settings).

    Any advice would be greatly apprciated.

    Thank you.

    Hello

    Allows summary;

    -You are not able to start the Windows operating system (even in safe mode)
    Right?

    -You are not able to recover the laptop with HARD drive recovery option.
    Right?

    -You don t have a recovery disk
    Right?

    Well in that case I n t see any other solution for new order recovery disk and then try to recover the laptop using this disc.

    You can order the CD from recovery here:
    https://backupmedia.Toshiba.EU/landing.aspx

  • Unexpected i/o error has occurred

    Just got a laptop from a friend that he trampled during the move.
    The detection area is a small little shriveled up, very little.

    I turn it on and load the Toshiba screen, then when trying to load Windows right after the Toshiba screen it goes blank for about 20 seconds and it appears.

    + Unexpected i/o error has occurred.
    http://img502.imageshack.us/img502/6388/dsc01098l.jpg

    Is it just a matter of getting a new hard drive? Or the motherboard could be poached as well?

    Hello

    If you don t have a CD/DVD drive and then I'd forget all this tests
    You need the CD/DVD drive to reinstall the OS again if you have the bootable CD.

    If your computer supports USB booting, then you could try to reinstall Win XP from bootable USB drive flash.

    For that check out this tutorial:
    http://www.jcmiras.NET/surge/P96.htm

    Welcome them

  • 0xc00000e9 error "an unexpected i/o error has occurred."

    UNLIKE ANYTHING I'VE SEEN IN THIS FORUM!  Help!

    Hi all!  I am working on a Toshiba Windows Vista 64 - bit laptop and I'm having an experience somewhat similar, as some people have had here as well.  The computer never starts past the Toshiba screen opening.  All I get is the black screen with the blinking cursor.  I tried F8 for safe mode, but nothing helped.  I can access the Setup (F2), but it's really of no use for me in this situation.  I downloaded the Windows Vista Recovery Essentials of NeoSmart Technologies, but after running for several minutes just to load the files, all I get is a screen telling me that "an unexpected i/o error has occurred", and I get this code: 0xc00000e9.  It also says it might be a problem with the hard drive or the CD.  I also tried Ultimate Boot CD which allowed me to analyze the hard disk to find errors, but the machine turns off after a period of time.  Nothing in these forums seem to apply to my problem because I can't go to the Windows Vista logo screen, so try to reach the system restore, command prompt or anything ELSE is impossible because I can't go to the black screen with the blinking cursor.  Can someone help me solve this problem?  Any help is welcome!  Thank you!!!
    Edit:
    OK, after the execution of Windows Vista Recovery Essentials, here is my screen error black verbatim:

    Windows has encountered a problem communicating with a device connected to your computer.

    This error can be caused by unplugging a removable storage device, such as a USB external drive when the appliance is used, or by faulty hardware such as a hard drive or the CD-ROM drive which is a failure.  Make sure that all removable storage is properly connected, and then restart your computer.

    If you continue to receive this error message, contact the manufacturer of the equipment.


    Status: 0xc00000e9

    Info: An unexpected i/o error has occurred.


    Any ideas anyone?   Thanks in advance.

    Hi Stotten,

    This problem occurs because you cannot start the computer with a hard drive. The error message refers to a material error in the BIOS of your computer.

    If you have any attached external devices, then unplug the device and check if it helps.

    If you have no external device connected to your computer, then it might be some conflicting drivers.  You will have to perhaps remove sound card etc in BIOS and check.

    You must also update the BIOS with the latest settings.

    You will need to contact the manufacturer of your computer for more information about how to reset the BIOS settings.

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

    NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  • Unexpected i/o error has occurred. Status: 0xc00000e9 setting from the Setup program

    Please, I have a Toshiba labtop, what sudenly accident and it does not open windows, this message appears at the beginning upward: unexpected i/o error has occurred. Status: 0xc00000e9

    Hello

    The error - an unexpected i/o error has occurred, status: (0Xc00000e9) is a material error in the BIOS of your computer. Basically
    It is tell you that the computer is not able to communicate effectively with the hard drive.

    Try the Startup Repair. Startup Repair is designed to prevent a time-consuming reinstallation of diagnosis and repair of problems which
    prevent Windows to start. Introduced in Windows Vista, startup repair is even easier to use, because Windows 7 now installs on your
    hard drive for you.

    See the links below for more details:

    What are the system recovery options in Windows 7?
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

    frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

    I also suggest you to update the BIOS. Update the BIOS, contact the manufacturer of the system!

    Note: Changing the BIOS settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot
    guarantee that problems resulting from the configuration of the BIOS settings can resolved e. Changes to settings are at your own risk

  • An unexpected i/o error has occurred to Oxc00000e9

    A few days I'll I've reinstalled my windows 7 on my PC. After 3 days I have had this error. I ssd and hdd connected and I installed the windows on the SDS. I checked the hdd and ssd health and it is said in good health

    This error can be caused by unplugging a removable storage device, such as a USB external drive when the appliance is used, or by faulty hardware such as a hard drive or the CD-ROM drive which is a failure. Make sure that all removable storage is properly connected, and then restart your computer.

    If you continue to receive this error message, contact the manufacturer of the equipment.

    Status: Oxc00000e9

    Info: An unexpected i/o error has occurred.

    Press ENTER to select the OS

    I press on enter and start the windows. Also, this error has another problem with him. Sometimes after I press the turnon button my PC shutsdown until it self before the windows logo

    
    

    Hello

    Thanks for posting your question on the Microsoft community.

    Thank you for details on the question and your efforts to resolve.

    This problem may occur to corrupt Windows files or if the BIOS is not updated. This can also be caused by a hardware problem.

    Please see suggestions of Afzal Taher responded on December 30, 2009 and check if that helps.
    http://answers.Microsoft.com/en-us/Windows/Forum/all/new-computer-running-Windows-7-unexpected-IO-error/46b4fc7a-9a83-4db2-9a00-dca512797e61

    Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • VPN connection: An unexpected error has occurred.

    I am suddenly unable to get my built-in VPN connection works on my iMac with OS X 10.11.5.  I get the VPN connection message: an unexpected error has occurred.  I have been using this VPN configuration to connect to work for several months with success.

    But last week (and I do not know if it had nothing to do with it), I went on vacation and used a free wi - fi setup of Tim Hortons.  I had a LOT of trouble getting the next login page, and I checked all playing with different settings of network without success.  When a change did not work, I put it to its original setting.  Finally, I learned to use Safari to access the free WiFi connection page of Tim.  Then once connected, everything was OK.

    But when I returned a week later and if necessary, to start my VPN connection to access the work, it wouldn't start.  I checked and recheck all my settings preferably of different network, but did not find those who were wrong.  I even deleted and re-entered my VPN service definition without solving the problem.

    Thinking that the problem could be the newly installed ISP of Bell equipment (we went from Rogers while I was away), I used my BlackBerry smartphone (issued by my employer) to create a wi - fi hotspot and accessed to the internet using this connection which completely ignored my home ISP equipment.  But still, I was unable to establish a VPN connection.

    I then tried my iPad VPN connection, and it worked!  Then, I defined a VPN service on the iMac to my wife and the iMac to my daughter and was able to successfully establish a VPN connection to my work very well, using exactly the same VPN configuration.  This led me to the conclusion, it was a problem on my iMac (and not with my new ISP or VPN system of my work that had none of the changes you made), but I still can't find what is "broken".  I run Onyx for my iMac OS X 10.11.5 and repaired permissions and clean the cache and all the rest she is doing to "solve" problems.  But the problem persisted.

    Is there a preference file corrupted somewhere (scan option is no longer on the current version of the Onyx for a reason any)?

    I still have a network setting wrong somewhere I need to go back to the system is correct value?

    Here is the attempt to VPN from the file system.log (with some hidden values in the case where they display my work VPN access):

    26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: received an order to start SystemUIServer [257]

    26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: changed to connecting status

    26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: IPSec connection to server nnn.nnn.n.n

    26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: phase 1 of the IPSec from.

    26 June at 16:13:48 Myrons-iMac raccoon [520]: agreed to the takeover of vpn connection.

    26 June at 16:13:48 - last message repeated 1 time-

    26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec connection to server nnn.nnn.n.n

    26 June at 16:13:48 - last message repeated 1 time-

    26 June at 16:13:48 Myrons-iMac raccoon [520]: connection.

    26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec Phase 1 started (initiated by me).

    26 June at 16:13:48 - last message repeated 1 time-

    26 June at 16:13:48 Myrons-iMac raccoon [520]: bind 1 (cannot assign requested address)

    26 June at 16:13:48 - last message repeated 1 time-

    26 June at 16:13:48 Myrons-iMac raccoon [520]: sendfromto failed

    26 June at 16:13:48 - last message repeated 1 time-

    26 June at 16:13:48 Myrons-iMac raccoon [520]: Phase 1 negotiation failed due to the error of sending. 94437eb7d5b1b6e8:0000000000000000

    26 June at 16:13:48 - last message repeated 1 time-

    26 June at 16:13:48 Myrons-iMac raccoon [520]: can not send packets

    26 June at 16:13:48 - last message repeated 1 time-

    26 June at 16:13:48 Myrons-iMac raccoon [520]: IKE Packet: send failed. (Initiator, aggressive Mode 1 Message).

    26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: Controller IPSec: IKE FAILED. Phase 1, assert 0

    26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: status changed by disconnecting

    26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: IPSec disconnection from the server 142.201.5.6

    26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec disconnection from the server nnn.nnn.n.n

    26 June at 16:13:48 - last message repeated 3 times-

    26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: status changed to offline, terminus right no

    Any help or insight would be more useful and appreciated... so that I can work from home again.

    Thank you

    Myron VanderLaan

    I finally found my VPN problem.

    There is a 'racoon' file that is generated when I connect to the VPN to my work site.

    I have created a modified version of this file so that my connection does not expire in 3600 seconds (changed in 24 hours).

    Apparently, there are some slightly different settings (such as certain IP addresses other than VPN IP of my work) in this file under our new ISP Bell from the former FAI Rogers.

    And if I connect to the WiFi Hotspot from my BlackBerry, it does not once again because these settings in the file are different again.  I must return the file generated instead of my modified file.

    Bad luck!

  • Time capsule, an unexpected error has occurred

    Hello everyone, I am having trouble with my Time Machine for a month or two. He was unable to make a back-up, even if the light was green all the time. Now, today I tried to set up again as before, but each time an EEG this message: an unexpected error has occurred. Try again.

    I did: a hard reset, soft reset and close my modem with every single device connected to it.

    I use a 2011 Macbook Air (on OSX El Capitan) and the fourth generation time Capsule.

    Thanks in advance.

    You have an adapter Thunderbolt-to-Ethernet for the MacBook Air?

    If so, you can use that to set up a wired connection to the Mac to one of the three LAN <>- ports on the time Capsule to see if a direct connection work better than wireless to try to set up the Capsule time again.

    If you do not have this card, you should really consider to buy one, because it will be useful when you want to have a wired connection much more quickly from your Mac to the time Capsule.

    Maid in Gigabit Ethernet Adapter - Apple

    If you do not have the card, or do not have one, then we can try to change a setting on your Mac to see if it can help with connection problems. After the back if you want to try this.

  • An unexpected error has occurred - Apple tvOS 9.2

    Since my Apple TV 4 Gen tvOS 9.2 update, I have problems w / playing some movies I have purchased through iTunes. Get "an unexpected error has occurred" and an ignore"" button. The titles of films even play fine on my Macbook, iPhone and Windows PC. Replaced my Apple TV 4 material during the weekend but the problem persists with the replacement unit. Contact Apple Support confirmed reports addtl of the problem and how it could be related to a recent change in the backend to the iTunes store. Help w / titles problematic movies. If anyone knows the same thing, support both want to hear from you.

    Have the same problem
    bought nine ATV4

    Do not play anything on the account

    Does not buy new movies

    "Unexpected error".

  • Status: Unexpected error has occurred. The timeout of waiting for an answer UVSC error internal

    Work with labview ARM and it was working fine this morning.  I went to run a program and the build failed with the following message.

    [13: 34:50] status: error
    An unexpected error has occurred.

    [Source: the timeout of waiting for an answer]

    Internal error UVSC

    Detail: [UVSC_PRJ_LOAD, MSG: 0x1000, STATUS:]
    [0x1] code: 1]

    Did normal things as restart the computer.  Plug and unplug the Board of Directors of the computer.

    I tried to reinstall the whole arm labview and it does not work.

    Even from labview so you go to tools > ARM > show keil does not work either.  I can open keil in itself, but it doesn't seem to be communicating with labview.

    Figured it out.  Somehow the projects I was working on has been corrupted somehow.  After another reinstalled, I opened a sample project, not one of the many that are mine, and it worked.  I had copy and past the code on the project and in a new, but it works.  Don't know how my projects I screwed up in the middle of work on them.

    Now, back to actually do the work.

  • Fix the installation Center has encountered an error - an unexpected error has occurred

    I had tried everything to install the Microsoft difficulty It Center but get the same error at all times and have no idea why.  The error message is:

    Fix the installation Center has encountered an error

    An unexpected error has occurred.  Close, and then try to install again.


    Of course I tried this several times with the same results.  I am logged on as administrator and cannot find any specific details as to why it persists.  Can you help me?

    Dave

    OK, besides it seems that this happens if AutoPlay is disabled (!).

    http://social.Microsoft.com/forums/en-us/fixitcenter/thread/9089abba-ACA9-4833-ab71-c863c69d696d

  • Cannot install LifeCam HD-5000 on Windows XP - error "Setup cannot continue because an unexpected error has occurred."

    Original title: 953691

    Installation of webcam LifeCam HD-5000. I'm on Windows XP and you get to halfway through the installation and error message came through. Three times so far.

    Error message reads

    The installation cannot continue because an unexpected error has occurred

    http / / microsoft.com//kb/953691 support

    Any suggestions?

    Hello

    ·        Have you tried the steps mentioned in the article KB 953691?

    ·        What service pack is installed on your Windows XP system and version, 32-bit or 64-bit, what has?

    If you have not tried the steps mentioned in the article then, I suggest you try the steps and let know us if the problem is solved or not.

    Troubleshoot installation of Intellipoint and IntelliType LifeCam software

    http://support.Microsoft.com/kb/953691

    If you use Windows XP 64-bit, then the LifeCam HD-5000 is not compatible.

    http://www.Microsoft.com/hardware/digitalcommunication/ProductDetails.aspx?pid=019&active_tab=systemRequirements

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • An unexpected error has occurred that this application cannot recover from. It will now close: ___Unexpected code: 3221225477__Unexpected address: 0051EAAB

    This happens everytime I open a session.

    When I started my computer an error code appeared as follows: unexpected ___An error has occurred that this application cannot recover from. It will now close: ___Unexpected code: 3221225477__Unexpected address: 0051EAAB

    Hello

    I suggest you to follow these steps and check if that helps:

    Method 1:
    Start the computer in safe mode and check if the same problem occurs:
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

    Method 2:
    Try to perform the clean boot and check if it helps:
    http://support.Microsoft.com/kb/310353

    NOTE: When you are finished troubleshooting, make sure that put you the computer in start mode normal as suggested article above.

    It will be useful.

  • Cannot run Microsoft FIXIT error: "an unexpected error has occurred.

    Title: Microsoft Fix it fails

    Hello

    Whenever I try to run Microsoft Fix it, I get an error message saying something like "an unexpected error has occurred.  The fix that it Wizard cannot continue. "I used to see if the Fix, it would help solve the problem of update that take place on this Dell Inspiron laptop running Windows Vista 32-bit Service Pack 1 with Norton 360.  I thought that I had made progress on the issue of the update, but now they are all fail during installation, including Service Pack 2.
    The Dell PC Checkup shows as operating without any problems portable equipment.
    Thanks for any help that can be offered.
    Kind regards
    Roxy111

    Hello

    -What is the FIXIT you have tried to solve this problem?
    -Do you have problems with the installation of the Windows updates?
    -You receive an error message while trying to install updates?
    -You are aware of any changes made on the computer before this problem?
     
    Step 1: I suggest you to see the link below and cehck if the problem persists.
    FIXIT solution Center
     
    Step 2: File system (CFS) Checker

    SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

    To run the System File Checker tool, follow these steps:

    (a) click Startand type cmd in the box start the search.

    (b) right click on cmd in the programs list and then click run as administrator.

    If you are prompted for an administrator password or confirmation, type your password or click on continue

    (c) for the command prompts, the following line and press ENTER:

    sfc/scannow

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7?

    http://support.Microsoft.com/kb/929833

     
    Step 3: Clean boot

    I suggest to maintain the computer in clean boot mode and check if the problem still persists. A clean boot to check if startup item or services to third-party application is causing this issue.
    You can read the following article to configure the computer to boot:
    http://support.Microsoft.com/kb/929135
    Note: After the troubleshooting steps, see the link to start to set up the computer in normal clean startup mode.

    For reference:
    Information about Service Pack 2 for Windows Vista and Windows Server 2008
     
    Hope this information helps.
  • Wireless settings will not be saved... "an unexpected error has occurred."

    IM equipped for vista in my xpsm1330 and then one day, all of my wireless settings are not saved. I tried to save all my network (wireless settings) manually but I get this message "an unexpected error has occurred." Help?

    Hello

    Was there a change or a new downloads on the computer before it happens?

    Also, did you run a scan for virus since it began? I would start by doing this.

Maybe you are looking for

  • Canon 7 d II battery drainage.

    I can get the views of 700-1000 by charge of battery on a freshly charged battery of LP E6N, however, if I simply put a fresh battery in the unit and let it sit for a week (NO exposure) to the battery level goes from 100% to 76%...! GPS verified as b

  • I'm under Microsoft Windows OS XP Home Edition Version 2002

    I accidentally deleted the file: nvrd32.sysThis seems to be a very critical file and why I deleted it... who knows, there must be the male in me... Laughing out loud?I tried to launch the Windows XP cd, but I get this message... file nvrd32.sys is no

  • Sound is played through speakers with headphones plugged?

    I had just driven back one of my audio drivers (which is Cirrus Logic CS4206A AB 78) after the last version is not about me. Who restored the sound from the computer, but after trying to plug my headphones into the headphone, I tried to play video fi

  • How to enable the windows Narrator; It drives me crazy

    I activated and cannot now, for the life of me, find a way to get rid of it.

  • Could not test the application on the device in draft mode

    Hi all! I have an application already published for BB10 devices, and I want to add support for the Playbook and test it before release.In the portal provider I have download the new .bar file and select all devices (Playbook too). The application mo