Satellite U300 - only the external mouse works via USB

Similar Questions

• Satellite U300-130 - TosBtMng has stopped working after installing Nokia PC Suite

  I have the same problem too... with Toshiba Satellite U300-130.

  Bluetooth worked well enough before I installed the Nokia PC Suite for my mobile on my PC (new version 7.1.26.0 Web site).

  To be correct, as a first step, I even managed to maintain a connection between the PC and the Nokia Bluetooth and ran the synchronization of the contacts. I tried several times, but each time synchronization run ended with the message "PC couldn't get response from your Nokia.

  After the reboot, my PC went crazy and started broadcasting the message "TosBtMng has stopped working" and it restarted every time that I ask him to close.

  Installation of the new version of BT Stack (6.40) does not resolve this error.

  Help, please

  I also use Toshiba Satellite, I use this [suite Nokia pc | http://www.softsea.com/review/Nokia-PC-Suite.html] version

• Boot from an external HARD drive via USB

  I have an 8200 Elite SFF and wants to start an alternative system (not Linux, but * NIX - like BONE) of a disk external DRIVE, connected via a USB port. My main operating system is WIN 7 64 bit, but for some special tasks I´d like to use the alternative OS. It worked without any problem on my two previous stand-alone - elected USB as a boot device in the BIOS boot menu and it starts fine.  However, on my Compaq 8200 there no USB option in the start menu. However, when I connect the external HARD drive to a USB port, the name of the HARD disk appears in the start menu, but again, it won't start him.  Have heard that there is a tweak to fix this, or maybe I m wrong. Alternatively, my stand-alone motherboard just can´t boot from an external hard drive via USB? Any ideas?

  Yes,

  Unplug everything plugged to the computer except the keyboard, mouse and monitor.

  Then use this method to Flash the BIOS.  It's the best way to go.

  USB Device Flash BIOS DOS

  BACK Flash (DOSFlash.exe, FlshUefi.cpu) is the Flash BIOS DOS compatible system utility that can be used from a bootable BACK storage device (where the 'BACK' refers to a number of operating systems such as FreeDOS, DR - DOS or MS-DOS). FlshUefi.cpu is the driver required for DOSFlash.exe. To Flash the BIOS of the system to a bootable USB storage device, you'll need to copy the contents of the BACK Flash file on the USB device, start the PC from the USB device and run the DOSFlash application. To see a more complete description of the BACK flash utility, view DOSFlash.txt located in the folder BACK Flash. This folder also contains the required binary BIOS image.  The binary image file is named xxx_MMmm.bin , where "xxx" is the family of BIOS, 'MM' is the major version number and "mm" is the minor version number.  This file can be copied to the root directory of any removable media USB for use with F10 setup option «Flash system ROM»

  The display of the folder BACK Flash content

  The links on this post do not work. I copied the section from the BIOS flashing instructions for the specific section you need.

  Paul

• Control external synth MIDI via USB keyboard controller

  Friends,

  I'm trying to get a Novation Launchkey 25 to work as an external controller for mother-32 MOOG synthesizer.

  Software - Logic Pro 9

  USB - LaunchKey 25 Novation keyboard controller

  Interface - Focusrite Scarlett 18I6

  MacBook pro with current operating system

  Currently I have the out of the Focusrite and towards the MOOG MIDI cable. The Launchkey is connected via USB on my Mac. Logic can see the keyboard and interface, but not the MOOG. I just want to control the MOOG mother 32 with the keys. I am at a loss on how to implement the logic. Any help would be greatly appreciated.

  Thank you

  Steve

  1 MIDI OUT of the Focusrite at noon on the MOOG.

  2. create an external MIDI track with the release (in the Inspector) on the MIDI OUTPUT Focusrite. Also assign the desired MIDI (or ALL) channel. Better, the use of the channel the MOOG is set up to receive on.

  3 connect the headphones to the MOOG, to see if it is audio output. To get the audio MOOG through logic, you should run the audio Moog in the Scarlett outputs, create an Audio track, the value of channel inputs inputs use the MOOG, the value Preferences / Audio monitoring software allowed to logic. Allow recording the audio track. You can select two tracks (Audio and MIDI external) using shift/select, if necessary. Audio will come from Scarlett.

  It is another way to analyze using a plugin, get that first day.

• Satellite A350 - Touchpad does not work, but an external mouse works

  Satellite A350 Touchpad does not work ok (unstable system and left button not loaded).

  I tried to make the driver but nothing. No problem drivers (conf system). I have the driver for the touchpad stroped and with an external mouse everything is working properly.

  What should I do? Don't you think it's hard or soft the problem. * The touchpad is NEVER worked.*

  Thank you, and sorry for my bad English. :-(

  Hello!

  The touchpad does appear in Device Manager or you have here yellow exclamation points?

  Like Akuma says you can enable or disable the touchpad with FN + F9 key combination.
  Did you check that?

  In the worst cases, you must go to an ASP. It seems to be a hardware malfunction, and this must be checked by a technician of the laptop. Here, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• Satellite C screen goes blank and only the visible mouse pointer

  Hello

  My laptop Windows 8 is a couple of months

  Today, when I try to start it shows the splash screen and then the screen turns black with only the pointer of the mouse showing.

  I can move the pointer on the screen, but windows does not load.

  What happens if you go to the BIOS by pressing F2 while turning on the laptop?
  You see the BIOS screen and all the BIOS settings?
  Could connect you external monitor to the laptop just to check the 2nd display?

  In which case it's just a software related issue, you should be possible to repair the system using the Toshiba HDD recovery or the Toshiba recovery disc.
  Have you checked one of the procedures mentioned?

  The comments appreciated.

• Satellite M30X-111 screen does not display anything but the external monitor works

  My laptop just screen does not display anything (like when the computer is turned off), but when I connect the external monitor, then the desktop is displayed on this screen. I tried to recover the laptop using the recovery disk and it worked again, but today, it stopped working again.

  Again, I must plug the external monitor, and after I tried to restart, I continue to pressing F8 but the startup mode is not come, the noise of when you press a button for too long beeps, however, the monitor of the laptop working again.

  How can I solve this problem?

  What do you do? You want to recover the laptop?
  If Yes, you n press any F8 but you will need to boot from the recovery CD by pressing the C key immediately after starting the laptop.

  But this question seems that you have accidentally switched to external display.
  I recommend checking the Fn + F5 option. This combination allow you to switch between the display and the external monitor.

• Satellite 4100XCDT: how the IRDA port works under DOS

  I have a Toshiba Satellite 4100xcdt. How do I assign a COM port to the IRDA (infrared) port in the BACK so I can use programs such as Winsamp
  http://www.veg.Nildram.co.UK/remote.htm

  The BIOS assigns COM1 and COM2 serial port to the built-in modem. However there is not a single option for the IRDA port not found.

  How can I make the IRDA port works under DOS?

  In my opinion it of not possible to use the IrDA DOS, because drivers must be installed and initialized.
  The IrDA port driver is a common Windows driver and the irda connection works only when windows was loaded

• Portege Z830: I want to disable internal LCD and use only the external monitor

  I have a Toshiba Portege z830.
  I use my laptop in "Extended desktop", mode with an external monitor, which is the main display.
  In this mode, the two screens are still on, but I want the built-in LCD screen to be opened only when I use it.

  Is this possible?
  Thank you.

  Hello

  In my opinion, this is not possible.
  In extended mode, you use and display internal but extended and the long part is visible on the external monitor.
  In such a case its any that your external monitor is set as main display.

  If you want to use an external monitor only, you can only export the video signal on external monitor by pressing FN + F5

• Can't burn music on the internal CD player so how do we change to use only the external driver to burn CDs?

  My CD drive doesn't work, so I bought an external CD drive.  I can rip music from the new drive, but when I want to burn I don't have the option to burn on the internal drive that no longer works.  How can I switch (permanently) to my external CD drive?

  Hello

  · What is the number and the model of the external drive that you use?

  · You use windows media player to burn the disc?

  · If so, what is the version of windows media player on the computer?

  You can check the link below: how to copy music to and from an audio CD in Windows XP: http://support.microsoft.com/kb/297015/en-us

  How to copy information to a CD in Windows XP: http://support.microsoft.com/kb/306524

• I want to use only the external mike and headphones

  However, somehow the microphone for the internal webcam or Skype or else suddenly transformed, so now I have two of them.  The internal MIC is echoing to the sounds of television, me and interferes with my external mike recording.

  I cut it by adjusting the levels, but I want that he TAKES... OFF!  When I go into properties, it shows just an icon for the external mike and headphones, it does not seem to suggest that there is another work of mike.  It's windows 7, 7 year old computer.

  Any ideas?

  Hi Mollie,

  We had a recent discussion on the same issue. Please visit this link and follow the instructions in James.Orr.

  Let us know if you need more information.

  Kind regards

• How can I keep the laptop and find only the external monitor when I close the lid?

  Original title: external monitor

  I want to use an external monitor with my laptop Vaio Windows 8, but when I close the lid, both screens will disappear.  How to keep your computer on and display only the extgernal monitor when I close the lid?

  I want to use an external monitor with my laptop Vaio Windows 8, but when I close the lid, both screens will disappear.  How to keep your computer on and display only the extgernal monitor when I close the lid?

  Hello

  Perform the following steps.

  1. press the Windows key + X to display the System menu.

  2. Select Control Panel.

  3. Select the Power Options.

  4. in the left menu, select Choose closing the cover .

  5. look in the section of power and sleep buttons and lid settings .

  6. use the drop-down menus of the section when I close the lid , and then select do nothing for both options.

  I hope this helps.

  Concerning

• Satellite L40 - BIOS - the external monitor connection preferences

  Hello!
  I have some problems with the external monitor (CRT) connection for laptop L40 - 17O (PSL4CE).
  Matrix on it is broken. There is no windows installed.
  I connect external monitor, but I don't see anything. I heard that it is necessary to change something in the BIOS, but it's hard to do that without image =)
  Would be great if someone who has the same note would say what button to press to enter the BIOS and change the options in this way. Or perhaps someone could take a snapshot of the bios and its options.
  I'm looking forward to see answers)

  Normally it should be an option in the BIOS where you can choose, if it isn't the internal LCD screen, or both or is automatically activated after connecting a display to the machine.

  Under Windows, the combination FN + F5 does exactly what you need: it goes from the screen.

  Could you please check your BIOS and attention to the options in the form? I guess that basic finding. :)

  Welcome them

• Why the drop shadow options change all layers not only the photo im working on?

  I have a poster with different layers, like text, photo, etc.  I have inserted a new photo and make a shadow, changing the size, spread and distance, but when I change some of these options as the angle or distance all the layers on the poster who shadows behind all the changes that I chose for the inserted picture.  I reproduced just the photo layer to use a drop shadow (using only the option of distance), then it changed all the text on the poster with her.  ??? None of the layers are related to each other.

  Only the angle of the drop shadows can be (and are by default) linked together. To enable or disable this feature use the check box use Global light right next to the Angle selector

• Drive external hard connected via USB hub: icons not showing on desktop

  Hi... on an iMac 2015, using a USB hub 3.0 occasionally to connect an external hard drive (which stores these things as art assets)... but the external hard drive icon does not appear on the desktop... it IS in the sidebar of Finder, though...

  But on the icon the Finder sidebar, the small icon "eject" gray is missing, and the only way to eject is to right click and select "eject" or use the eject button in the Finder toolbar... it's okay...

  But is there a way to display the icon on the desktop, so I can always remember to eject the disks attached?

  (the desktop icon shows normally when connected directly via the USB ports at the rear)

  Thank you.

  Finder-> Preferences-> general, check the appropriate boxes under "show these items on the desktop".

  [My personal choice is them having all checked]