Satellite U300 - white screen after reboot

I have a 3 yo Satellite U300 (with Vista), which was usually in good working order until this morning. It froze a little bit when I had iTunes open so I restarted. He now has a completely blank screen.

I tried to stop and restart several times, I tried to plug it into an external monitor and have tried to remove the battery and drain the power I had read recommended on another forum.

It also seems to be from running as it should (turns on, fan is on, etc) but I can't get anything on the screen.

Any ideas?

Hey,.

If you can t get an image on the external display, it appears to be a malfunction of the motherboard, CPU, RAM or anything, but the internal screen should be ok

Hmm. In your case, I had read this article, maybe it helps:
http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=21

In the worst cases, you need professional help of an authorized service provider. Guys can check your laptop and repair because they have access to the databases of Toshiba and order new parts.

Good luck! :)

Tags: Toshiba

Similar Questions

  • Satellite C660 - white screen after reboot

    I closed my laptop Toshiba Satellite C660-22V. I restarted immediately, but the screen is blank. The laptop was always well done loading noises it is.

    Any ideas on how to solve this problem?

    Have you noticed this for the first time now?
    Any reaction if you press F2, F8 or F12 at startup?

  • Satellite P300 - white screen after waking from sleep state

    I'm having this problem:
    The LCD screen may be empty when the computer is "awakened" from the sleep state. Nothing is visible on the internal LCD or an external monitor.

    There seems to be a solution:
    An update of the firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.

    described here: [white screen after awakening from fallback status | http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlView.jsp?soid=1642844&moid=1209152]
    -----
    I also found this, but it didn't really help me much further.
    [Satellite P200D and WinXP: no display after waking from sleep mode | http://forums.computers.toshiba-europe.com/forums/click.jspa?searchID=880412&messageID=118143]
    -----
    In fact, I think I'm able to solve myself, and I don't like not my laptop to be gone for two weeks or more. I just need some advice on where to find a correct upgrade. Is - this driver BIOS or graphics? Which version should download, where... etcetera. More tips on how to solve the problem are also welcome.

    -----
    Edit: link and no need for words of line. : s
    Edit2: grammar correction.

    Hello

    > An update of firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.
    If you check the Toshiba document you would see that your Satellite P300 is not related to this issue.

    In your case I would recommend upgrading the BIOS and graphics driver.
    In addition to keep your operating system up-to-date.

    I had this problem under Win XP and a MS patch and an update of the graphics card driver helped solve this problem.

  • Satellite M50 - white screen after login on Win 8.1

    Satellite M50 running 8.1 Win
    After login, download mouse white screen, but nothing else.
    Can run Explorer.exe manually via the the Task Manager for go, but some applications like Acrobat and Windows Mail does not work.

    I searched online and tried all sorts of fixes suggested without result.
    Any suggestions gratefully received!

    I don't know what the problem is here, but you can try to Win8 will stop completely and check the repair options. Try again with the system restore and roll back the OS a few days back. Maybe this will help.

    http://APS2.toshiba-tro.de/KB0/TSB2A03ES0000R01.htm

  • Satellite C855 - white screen after BIOS update

    Hello

    I am a beginner user,
    I have Satellite C855
    Yesterday, I downloaded a 'update BIOS"that was sent to my computer.
    Since that my screen is blank, there is a hum in the background.

    I have a recovery back up on my external hard drive, but of course, the screen is blank so I don't know how the product.

    I think I must have downloaded a model or the update was not compatible.

    Hello

    White screen do you mean that nothing appears on the screen?
    You see the start screen of Toshiba, or if you are able to access the BIOS?

    Where this is not possible, try this:
    Disconnect the power adapter, remove the battery.
    Press and hold the power button for about 30 seconds.
    Then connect the two parts (batteries and AC adapter) for the laptop and try to turn on the unit.

    In case this would not solve the problem of the laptop, I'm scared of m the BIOS update was not completed successfully and I think that only authorized Toshiba service provider would be able to help you.

  • Satellite L - white screen after the closure of the programmes

    I get a white screen when I close the programs and do CTRL ALT DELETE to get rid of him who takes me in the Task Manager and task to return to the office.
    Can anyone help please?
    I think I should have clicked on something because my laptop is touch sensitive.

    Thank you

    Sorry mate, but I think you should post some more important details if you expect help from users.

    Which laptop model you have?
    What operating system you are using?
    Are you running your own Windows installation or factory settings?

  • Satellite C660 - white screen after instalation image recovery

    Strange problem. My Satellite C660D-1FM was a bunch of updates from Microsoft (did not updates for centuries as it was used by my daughter and not connected to the internet) and after completing it restarted and I got the Toshiba splash screen and nothing. Holding F8 gives the same problem, tried turning the key '0' and that was the same. Connected to an external monitor and it's the same thing. I can't get into the BIOS and everything seems fine.

    Then, thinking that the HDD is maybe defective I mounted another drive hard and fully installed Win7 on a Microsoft DVD (SP1 and all updates) and everything works. Then, I thought I try and restore the laptop to factory settings by default using Toshiba DVD recovery which Id created. Worked well during the installation, all the installed DVD 3 and he's gone through the procedure installation, portable got at the end when he tried to restart it, rebooted and now back to the same error - Toshiba start screen is ok, but then he'll just empty. To convince me that I wasn't going crazy I then reinstalled Win7 my DVD of Microsoft and he moved very well, did all the updates and worked all day today with no problem.

    Someone at - it an idea of what's going on?

    Hmmm... something like that shouldn't happen.
    Do you use the recovery disc for the first time?
    Have you noticed the same result on both hard drives?

    Problem is that there is not much to do about it and there is no way to change it either in recovery installation runs, or later during the installation of windows is underway.

    Try to set the BIOS to default settings and simply try to reinstall the recovery image.

  • Satellite L40 - blue screen after reboot

    I have a Satellite L40.

    When I close Windows vista and reboot the laptop I get a blue screen. There must be a problem with one or more drivers. How can I find the driver that created the problem?

    With sincere friendships.
    Jetbag

    > How can I find the driver that created the problem?

    who knows what (s) but try to uninstall a driver for graphics card

  • Satellite C660D white screen after BIOS update

    I ran the update of the BIOS on laptop Satellite C660D PSC1YE recommended and he appeared to succeed, but when it restarts the screen won't turn on. I tried a few things to fix, but nothing worked.

    Tried:

    • connect an external monitor via VGA - white too
    • remove the battery of the CMOS button
    • removing a hard drive startup, to replace again
    • a short-circuit the J1 jumper under RAM slots

    What else can I try?

    Here is the windows bios update program:
    http://Support1.toshiba-tro.de/Tedd-...0601184846.zip

    Try to start with the battery.

  • Satellite C55 - white screen after login

    After having started and enter my password, I get a blank screen with just the visible arrow.
    Can someone help me please?

    Try to access the BIOS by pressing F2 button and check if the BIOS would be visible on the screen.
    If it is visible, your problem could be related to problems of system and generally system repair or new recovery system should fix this.

    The original Toshiba using preinstalled system; It should be possible to perform the procedure of HARD drive recovery.
    Press F12 all turn on/off the unit.

    Now you should see the start menu containing all bootable devices. The last option should be HDD Recovery
    This option set the laptop back to factory settings.

  • Satellite L350 - white screen after switching on

    * HELP *.

    Just bought this weekend, stood it all together and everything worked fine. Everything off and then came back a few hours later powered on and now impossible to get anything on the screen at all, totally black.

    I tried the FN + F5 and it does nothing. Any thoughts?

    I'm a total novice so take that into account when they meet. Thank you very much.

    Hey

    You see an image on the external monitor? Perhaps the internal screen FL inverter is faulty and must be replaced

    If an image on the external monitor, you can see t too it appears to be a malfunction of the equipment. You must go to an authorized service provider and ask for help. Technicians can check the laptop for you.
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  • white screen after the signing, the

    I have a laptop HP 2000 who now has a blank screen after I connect. I've removed ask.com because it never works and when I restarted my computer I get this white screen after the signing, the. I can still see my settings or start menu. What can I do to solve this problem. Help, please.

    Hello

    Try the following.

    Boot the computer normally and log.

    Black screen, old the ctrl and alt keys and press delete.

    Select Task Manager.

    Click on file and select the new task.

    Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

    When the system restore interface is loaded, choose a restore point at least 48 hours before the opening of the session the question first and then proceed with the restoration of the system.

    Kind regards

    DP - K

  • White screen after log-in

    I have a white screen after login, but it lasts for about 30 seconds my desktop appears.  Any ideas?

    I ran Microsoft Security Scanner and everything out very well.  I have McAfee Anti-virus works as well.

    Hello LA_Hay,

    Thanks for posting your query in Microsoft Community Forum.

    You did it any significant hardware or change software on the computer before this problem?

    A problem with the card installed on your system, might be a major cause of the problem. So, I would suggest trying the following steps and check if the problem persists.

    Method 1:

    Step 1: Try to start your system in a State of services necessary to the operation and a minimum set of drivers enabled, called Safe Mode.

    Start your computer in safe mode

    Step 2: If you do not have the white screen in safe mode, try to clean the system startup:

    How to perform a clean boot in Windows

    http://support.Microsoft.com/kb/929135

    Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

    If the problem persists, try Method 2.

    Method 2:

    Update your graphics card.

    1. Open Device Manager by clicking the Start button, click Control Panel, click System and Security, and then, under System, click the Managerof peripheral . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    2. In the list of hardware categories, find the display adapters and select the device driver you want to update, and then double-click the device name.
    3. Click the driver tab, click Update driver, and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    For more information, visit the below mentioned link:
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    If you are not able to update the device driver via windows update, you can visit your computer or graphics card manufacturer's Web site and download & install the latest driver.

    Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  • White screen after the Satellite Pro P200 display driver update

    I installed the latest display driver ATI Mobility Radeon HD2600 (8.432, on the site of Toshiba through Tempo) on my Satellite Pro P200 yesterday. Reboot, everything seems good as much as the screen "Please wait...". "Windows Vista professional, but instead of showing the page of connection I get an empty screen (with a mouse cursor that moves around as usual). All I can do at this point is to be able to, and I'm running out of ideas on how to move forward.

    Things I've tried:
    # start in safe mode, the video resolution or last known good configuration, result the same screen empty.
    # connect to the system using remote desktop (to disable the driver) is not possible because the system has not yet loaded the network drivers.
    # I can't go back to a restore point because Vista can't find (I did a manual after you install updates windows over a couple of days).
    I can run a system command line options of recovery and prefer to use it to disable the driver + if + I knew how before the use of the more radical options.

    A search on the web (http://www.google.co.uk/search?q=ati+catalyst+vista+blank+screen&hl=en&sa= N) reveals that this has happened on a wide range of laptops with
    previous versions of the driver, but none of the links I've looked at to give a solution which does not exist for me.

    I agree with Hairyfool, you who should solve problems using an external display. If no image appears, then something with the material might be.

    Please give some information about your situation...

    See you soon

  • Satellite C50-A-1 - white screen after update Win 10

    Hello

    I have a c50-A-1 satellite and my screen keeps going blank and I have to wait for it to come back on which is really annoying.
    I continue to by pressing the keys and the mouse, and it does nothing. In my power settings, it should not turn off.

    I don't know if this started after I updated to windows 10.

    Please can someone help
    Thank you very much

    Update the video card drivers from the download page for your model.

Maybe you are looking for