Satellite U400-128 does not start after hibernation

Hello

I currently have problems with my Toshiba laptop. I use it for internet, games, multimedia, programming... Yesterday, when I went to bed, I close the lid that does the same thing as usual--went to hibernation. But today when I tried to start the following things Notepad occur:

1. If battery is in and laptop is plugged into AC - Laptop starts but after 1-2 seconds it stops again
2. If the battery is out and the laptop is plugged into AC - same thing
3. If battery is in and laptop don't is NOT plugged AC - computer laptop starts but nothing is displayed on the screen (it's not far, it looks like even a wink or something). Strange thing is that I can't turn off the laptop and then pressing the power button / stop. The only way is to take out the battery.

The lights seem to work - well they are the right things.

THX in advance for any guy advice;).

Hello!

It's strange and looks like a hardware malfunction.

In your case, I'll try to remove the battery and the AC adapter. Wait up to an hour and then put in the battery again und plug in the AC adapter. Try it and maybe it works.

In the worst cases, you must go to a local ASP and ask a technician for help laptop.

Good bye

Tags: Toshiba

Similar Questions

  • Satellite A200 PSAEOE does not start after upgrading memory

    Hi, I am first time here.

    I bought a Toshiba A200 PSAE0E-03J02JDR with 2 GB of RAM. I bought a pair of ram Corsair (2 * 2 GB VS2GSDS667D2). The computer does not start after that I installed the memory. I have intel 945 chipset, which is capable of 4 GB (manual page 1-2). The bios version is 1.8 2007.

    Can anyone help me, please.

    Post edited by: Marian ovidiu

    Hello

    The A200 series supports different chipsets;
    Intel 945 PM
    Intel 945GM
    Intel 943GML

    As far as I know your laptop supports the * 943GML * Intel chipset and the chipset supports 2 GB RAM max.
    Take a look at your laptop s user manual * Page 18.*

    Summer: 4 GB of RAM are not possible, and therefore your laptop does not start.

  • Satellite P200D-130 does not start after upgrading RAM

    Hi, I just upgraded the RAM on my P200D 130 but it does not start after that.
    I removed the 2 Hynix 1 GB PC2-5200 and put in 2 SO Kingston DDR2 2 GB PC667 (should be the same as PC2-5200).
    Post-market nothing happens, light power control is turned on, I him stays CD drive but screen black, no beeps.

    I put one of the 1 GB modules, it starts normally, then I tried a 1 GB into the lower slot module and a 2 GB module in the top slot and it works.
    I tried a single 2 GB module in each slot, even in the form of 2 2 GB modules.

    What could be the reason, better: what would be the solution to ensure that the modules of 2 x 2 GB to work?

    Thanks in advance,

    Michael

    Hello!

    I think that both modules are not compatible to the laptop.
    Normally you can upgrade your laptop to 4 GB. Look in the user manual.

    The RAM, you should bring the computer dealer and request a new one. More buy modules with the same specifications and dimensions. Try buying RAM with the same specs as before.

    Good bye

  • Satellite 1410-304 does not start after upgrading memory

    I tried to extend the memory of 512 MB to 1 GB by placing two memory modules in my laptop Satellite 1410-304.
    These blocks of memory are each 512 MB and type: DDR400 PC3200 SODIMM.

    Each memory separate block in one of the memory slots A or B works well, no problems.

    However, when the two blocks of memory are installed, the laptop does not start no more.
    I hear the soft beeps indicating that a problem has occurred. The system works under Windows XP.

    Someone who can tell me how to solve this problem. Thanks in advance for your help

    concerning

    Marten

    Memory sticks are made by the same company? If this isn't the case, it will not work.

  • Satellite L100 113 does not start after upgrading memory

    Hello.

    Our Integrator bring to our company KVR800D2S5, but laptop memory modules does not start :(

    I read manual - this laptop supports 533 PC4200 memory modules.

    But SO-DIMM 533 MHz will be delivered in one month...

    The memory modules, we can install to Toshiba L100-113?

    Thank you.

    Hello

    I think that the laptop does not power upward because of a barrette memory faulty or not fully compatible.

    Please visit this memory 3rd party:

    [Memory for Toshiba Satellite L100 113 | http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=22360&ft=m&st=3]

    As you can see Satellite L100 113 memory can be upgraded up to 2 GB (2 x 1 GB) and you must use the DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM

    Concerning

  • Satellite A60-672 does not start after upgrading memory

    Hello

    I bought an additional memory for my laptop, but after installing it the PC will start is no longer, when I turn it on it makes a brief noise then nothing. After taking the memory expansion out again once, the laptop still does not start.

    Peter

    Hello

    I agree with "guy sos." There is no doubt motherboard problem now. I assume you used the incompatible memory module.

    In any case, contact the after-sales Service of Toshiba partner in your country and explain to them the situation. The address that you will find under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

    Good bye

  • Satellite L670-1EE does not start after upgrading RAM 4 GB to 8 GB

    I'm trying to upgrade the RAM from 4 GB to 8 GB. If I replace two 2 GB of 2 modules of 4 GB modules, the BIOS (which is the most recent) realize the 8 GB, but does not start at startup. There is just the white cursor blinking not.

    When I put in the 1 4 GB module and 1 2 GB module the system starts without a problem and has 6 GB. I checked the two 4 GB modules, they work in any combination, but not when both are installed together.

    I couldn't find any rider or the settings of the bios for the RAM...

    Any idea?

    Thanks in advance for the help

    The last plausible explanation is that both modules are ok, but not compatible with each other.
    The laptop can be upgraded up to 8 GB of RAM. This should not be a problem since the unit is supported by the Chipset Mobile Intel HM55 Express.

    So I think that you need to replace the modules Kingston modules are great and work without problem.

  • SP6100 does not start after hibernation

    Hi, I'm in trouble. We have here a SP6100 which went into hibernation.
    Now we are unable to bring it back to live. When you press the power button, only the far left led flashes orange.
    Even pressing the power on button for 10 sekonds does not stop, start or do ANYTHING.
    The screen remains black, no logo or anything like it either appears.
    As I am in the middle of nowhere (Sierra Leone) with the next Center about 4000 km (not no joke), I have to solve it myself. What would - they in a repair center? I'm known in technical terms. So I can just unscrew if necessary. Where should I start?
    Any help welcome!
    How to remove battery from the bios clock? Where is that?

    Hello

    Can you please tell me if this blinking is consistent and uninterrupted or there is some sort of Morse code (orange flashing)?

    If there is an excessive flashing there may be some malfunction of the equipment. If the power supply microcontroller detects an error lamp DC IN sends a blink code.

  • Satellite 1800-814 does not start after the installation of the software

    Hello
    If I pass on my old Satellite S1800-814, it seems to start correctly: it shows the symbol of "Toshiba", then "Windows XP loading", then the screen goes completely blank, followed by a black screen showing the cursor that I am able to move. The hard drive continues to hum as usual for a few seconds, but then begins to repeat a series of clicking noises, somewhat like a disk that is stuck. The boot process is not still engaged.

    Here's the context: I installed my (old) version of Avid Xpress Pro editing software on my Satellite 1800-814. I managed to install a newer version, even if it does not function effectively, where my attempt to install an older version more closely adapted to the processing speed and the size of the RAM 1800-814. I got the usual warning at the end of the installation program of Avid saying that Windows can be affected if I let the installation ends in letting the computer on. But I pressed the option "continue anyway" (as I've done it before without negative effects). The computer off, but he came in as described above. Please tell me what I broke. Can I ever solve this?

    Thanks for your help.

    Hello

    Try to start your computer in safe MODE and try to remove preinstalled software. Please report the results.

  • Satellite Pro A40 does not start after water spilled on it

    Hello

    I have a problem with the laptop of my companion. After she pours water on her, she has stopped working (no surprise really lol). I took it to pieces, right down to remove the motherboard to try to find the fault. Now when the AC is connected and batt is in place, NIP of the led, same thing happens without batt.

    BUT the computer does not light when you press the power button. Im guessing that it is a hardware failure, since water isn't really best friend elecrtics, but I was hoping someone else might have other ideas/solutions?

    I searched the toshiba site and found nothing on this laptop.

    Any help is very appreciated!

    Hello Danny

    You are absolutely right. It's probably hardware failure and I fear that the motherboard must be replaced. I recommend you contact Toshiba service partners in your country and look for info on the repair and costs.

    Good luck!

  • Satellite M30-604 does not start after upgrading RAM

    I have exactly the same problem with a Satellite M30 604! I have 2x1GB sticks and screen stays black. It works if I use one of the 1 GB sticks and one the old 256 KB stick but not the 2x1GB sticks as it should be (according to the specifications of my model manual).

    Boths glue work perfectly, I tried to the sepparately.

    In addition, computer does not work with the single 1x1Gb stick, mandatory I have to combine a new (1 GB) with an old (256Kb), or just stay on the two old sticks...

    What can I do? PLEASE, I BEG YOU!

    Hello

    Satellite M30 can be upgraded up to 2 GB of RAM, but you must use compatible RAM modules.
    As far as I know, you can use the modules of PC2700 and PC - 2100 DDR SODIMM 200 pin.

    I think that you problem is certainly linked to a not entirely compatible RAM modules

  • Satellite L30-PSL33 does not illuminate after hibernation

    Hello

    as I said in my previous post, I also have a problem with the Hibernate. The thing is that when I leave to transform a hibernation on this more later sometimes not loading Windows - the load bar coming to an end and then it stops 'thought' so I have to stop it and start it...

    The operating system is Win Xp Pro SP2 on Toshiba Satellite L30-PSL33. For example, it loads Windows hibernation 2 or 3 times, and then after that it will not load the operating system.

    Please give me an advice how to fix this...

    Thank you

    It's not easy to say what s may be wrong because like you say so this problem happens sometimes and that's why he of not easy to reproduce this error.

    I m an owner of a Sat L30. I use Vista on my L30 and received no similar problem.
    I talked to some people, and also read on some sites Internet computer that this error could be related software.
    One question; what OS came preinstalled on this notebook; XP or Vista?

    Maybe you have updated the operating system on your laptop to the last State.
    Please also check if the third-party programs 3rd n t assigned the wrong operating system.

  • Satellite M30X-122 does not start after upgrading memory

    Hello

    I want to upgrade the RAM in my Satellite M30X 122. Correctly my NB contains 2x256MB.
    I bought a GB 1 333 MHz. Cl2.5 module PC2700 (corresponds to the former, but more grand ;-)))
    Now I build in the module, but after the build-in system is dead.
    It doesn't show anything on the screen (after pressing the button one)).

    Does Anyboby have some tips?

    Thank you very much
    Peter

    Hello

    Toshiba has recommended the use of these memory modules:
    PC2700 256 MB (PA3311U - 1 M 25)
    PC2700 512 MB (PA3312U - 1 M 51)
    1024MO PC2700 (PA3313U-1M1G)

    Well, the size of 1024MB should be compatible. In this case, it s not a module size.
    Have you tried to get into the BIOS? BIOS recognizes the memory module?
    Maybe the module is broken?

    In my opinion, you should check if the module memory works on a different unit. If this module works correctly on another unit if your M30X doesn t support this module of memory and you need one another.

  • Satellite 2410-504 does not start after you remove RAM module

    Hello

    I need assistance or advice.

    I have a portable Satellite 2410-504 and I was looking for to increase the memory, I am a Novice with computers, I decided to remove the Module that is already in place (to see if I was capable of employment)

    After removing and then returning the Module, then I went to turn on the laptop and Yes you guessed it, NOTHING!
    The power lights are on and the light comes on but the screen is blank and there are no hard disk activity.

    Now, trying to get back on my actions, I have been unable to completely remove the battery but I'm sure that he slipped on the connectors.
    Could I have caused permanent damage or are my actions retreivable.

    Thanks in advance,

    Mike-c

    Hello

    Did you check if the RAM has been inserted correctly?
    Select this check box.
    But of course, the RAM could be damage due to wrong treatment nothing is impossible
    My computer laptop didn t start because one of the RAM died suddenly.

    What you could do is to remove the battery and unplug the AC adapter.
    Then you have to wait a little (one hour) and need to connect the two parts again.
    Then try turning on the laptop computer.

  • Satellite L10-104 does not start after the battery totally empty

    Hello

    After leaving the laptop the weekend without the charger, the battery was totally empty. So I plugged back it it to charge the battery for a day.

    Now, when I press the power button the Green LED at the front lights up for about 3 seconds - nothing else is happening. No HARD disk does appear, no noise from fan coooling, nothing on the screen.

    Does anyone have ideas, what I could do to make it work again?

    Thank you

    Christian

    Hello

    Remove the battery and unplug the AC adapter from the laptop.
    Wait a little (1 hour) and then reconnect the two parts.
    Then try turning on the laptop computer. Maybe it helps

    If this will not help, then a hardware problem might be possible
    In this case the RAM modules must be verified in the first step.

    See you soon

Maybe you are looking for

  • Music dimmed, unable to play

    just got my replacement iPhone and all my music on my new phone is grayed out.

  • How can I see calendar events on the calendar reminder app tab.

    Please guide me how can I add or view the events of the calendar reminder (apple by default app).

  • Audio Surround Sound System

    Hi all. I develop an audio system cockpit of flight 3D to run speech recognition applications. My problem is this: I want to be able to output sound to each stakeholder in the SRS 7.1 individually. In other words, I need to extrapolate on the code th

  • Error code 490

    I try to install service pack 1 and get the error code 490. I've been through many messages on this problem and have yet to see a resolution, y at - it a?  I'm trying to upgrade to Windows 7, and the Upgrade Advisor tells me to install service pack 1

  • My ACER laptop will not start Vista

    My acer laptop does not start correctly. It loads after windows bar loads and then it stops quickly. the pointer will appear on the screen and when it is left idle, screensaver maker runs. the same thing happens when I try to start in safe mode. What