Satellite U400-144 - Vista cannot return

Hello everyone

I got this new Toshiba Satellite U400-144 (PSU40E), came with Vista home and worked really well until I decided to install Linux. Everything was going fine until I had my HARD drive partitions, when I deleted my 1.5 GB partition, which is called partition EISA!

I don't know how to get it back, no disc don't came with the laptop and Vista no longer exists and I can't get it back.
Quite simply when I boot I get a message: LACK of OPERATING SYSTEM

Can anyone tell how to get this score again?
Please help and thanks in advance :)

Hello!

First, the EISA partition do you mean don't contain Vista installation files or let's say the recovery disc. The EISA partition contains files for restore systems and it is a feature of Vista, not Toshiba.
With the recovery disk, you would be able to get the factory settings, this means an installation of Vista with all the drivers and tools of Toshiba.

The only way to return Vista is a Toshiba Recovery disk. Go to a local ASP or you can order one directly from Toshiba.

Good bye

Tags: Toshiba

Similar Questions

  • Cannot update Bios for Satellite U400 - 134 Vista 64-bit

    When I try to update Bios 3.50 courses it is said that I couldn't have an administrator rights, but I run it under administarator.

    Who knows about this problem?

    Post edited by: Gerus

    Hello!

    Satellite U400 BIOS 2.0.17.64?
    As far as I know the latest version of the BIOS for Satellite U400-134, which belongs to the PSU40E series is the version 3.50.
    Check again on the Toshiba site: http://eu.computers.toshiba-europe.com

    If you download the zip file, you should extract all files before you start the update.

    Good bye

  • Satellite U400 and Vista - Apple iTunes installed error message

    The Toshiba Satellite U400-157 equipped of Windows Vista is running in many errors.

    The last instance during the installation of the software Apple itunes 10.5. On an initial installation with the 10.4.1.10 present. He gave the itunes error has an invalid signature, it will not be installed. After you uninstall the itunes 10.4.1.10 and trying to install version 10.5, it gives instant error attached messages.

    Can someone please suggest what I might be able to do with vista. I need to upgrade to windows 7, this will help. I don't want to see a message that it will not install Windows 7 after having paid for it online.

    > Please refer to help and Support for more information...
    In the window title is iTunes and Toshiba doesn't support this request so I'm afraid, you're on the wrong here m support page.

    What do you think? Maybe you should contact Apple support. They have the best experience with own product.

  • Satellite U400-20V - Vista to XP downgrade

    I have a Satellite U400-20V model with vista home premium, I want to down grade to XP Professional.
    How can I do this? Give some information.

    Hello

    Windows XP edition Setup family on new models of laptops is, in my view, more poised and in this forum, you can find a lot of useful discussions with instructions specific to how to proceed.
    Please, take some time and use the advanced search option and try to find some of them.

    If you still need help please let us know.

  • Satellite L350-14F - Vista cannot start the Realtek RTL8101e WLAN

    Dear readers

    I'm Dutch, if my English is not very good, so my apologies for that but I have a big problem.

    My Toshiba Satellite L350-14F with Realtek RTL8101E family PCI-E fast ethernet NIC (NDIC6.0 with Vista OS) cannot establish a connection with the outside world...
    I tried many drivers, but all do not work... I can't find any other driver. So I guess there must be something else on the computer...

    I reinstalled my computer while going to format all my hard drive and I have no CD of drivers for the laptop.
    When I got a _wired_ connection, Vista can try solve the problem itself. He found a driver and then I am redirected to a site of toshiba... Where to download a driver from East. I start the download and installation, but then the installation says that I don't have a correct serial number...

    All this me freaks out there... who can help me please?

    Greetings
    Roy

    PS: I checked my BIOS for strange things and one thing caught my attention on
    I have an option: Wake On LAN anti-piracy. And it is disabled
    BUT I can't change it to activate.

    Hello

    First of all, it would be interesting to know what you mean without link with the outside world
    The wireless network card is recognized correctly in the device (without yellow exclamation points) Manager?
    The router is visible on your computer?

    First of all, you must make sure that you use the latest WLAN driver on Toshiba website:
    http://EU.computers.Toshiba-Europe.com-online downloads support & -online Download Driver

    Additionally, make sure that you have installed the latest version of BIOS that you can find on the site of Toshiba, too.

    You should check the WLAN Setup on your laptop and the router. Make sure you that you have disabled Vista of WLAN power save function. You can find this option in Vista Power Management.
    Make sure that you use the same standard WLAN on your laptop as on the router, for example, 802. 11B or 802. 11 g.
    Last but not least you must update the firmware on your router. You can find it on the site of the factory. After the firmware update unplug the router for 5 minutes of the AC adapter.

    Good luck!

    PS: Wake on Wireless LAN has nothing to do with this issue. It of a feature that you can boot the laptop via a WLAN connection.

  • Satellite U400-124 - Vista does not so how can I access data?

    I have a problem with my U400-124 loading Vista. It has a blue error screen when you try to start windows. It happens with the startup repair program, but it does not work. This is why I have a question, unless someone can help with the above.

    I have restore disks, but I have to get the data on the hard drive. Is it possible to remove the hard drive, place it in an external enclosure, and copy the data I need. Then place the drive hard back in and start the restoration process?

    Thanks in advance.

    Yes, it's not a problem and you can do it.

    I did the same thing on my laptop satellite. It is fairly easy because the HARD drive is removed in minutes and so I can save all my data on my other laptop.

    These adapters USB disk HARD 2.5 SATA are not expensive. Ask your local computer dealer or eBay search. I bought my adapter on eBay.

    Good luck!

  • Satellite A200-13O: Vista cannot log on to another user or guest account

    Hello

    I run vista basic 32 bit and have problem to open a session on a different user account or guest account.

    I created standard account but when I try to log in there is a note:
    "sign-in failed. Cannot download the user profile.

    I tried to install Microsoft Management Console snap, but he is not in a position with this OS.

    can you tell me what I did wrong or how to put in place another account?

    Thank you very much

    Hello

    In your case I would recommend you to create a new user account and check if it of possible to switch to this account:
    In order to create the new account user, please follow these steps:

    1. Click Start and select Control Panel.
    2. click on user accounts and family safety.
    3. in respect of user accounts, click Add or remove user accounts.
    4. click on create a new account.
    5. Enter the name of the account. Select the account type: Standard or administrator.
    6. click on create account.
    7. Select the account that you just created. Click on create a password.
    8. enter a password for the user account and an indication of password option.
    9. click on create password.

    Now you should be able to use the new user account.

  • Satellite A100-998: Vista - cannot play DVDs with Media Player and WinDVD

    I just upgraded my Satellite A100-998 to Vista. Nothing but problems. I can't play DVDs with Mediaplayer because my "video card does not meet the minimum memory requirement of 64 MB of RAM video.
    He tells me to update the video driver or install a new video card.

    I can't use Intervideo WinDVD to play discs because wnaspi32.dll is missing. I can download it on the web, but it becomes just as much as my office. Anyone know where I should put wnaspi32.dll and how much?

    Someone had this problem? How did you solve this problem?

    Thank you.

    First of all, I must say that I haven't noticed these issues after the installation of Vista. I installed it on the A100 and everything went correctly
    I put t know if you use a graphics driver right but necessary for correctly working Vista.

    The user Scooby1966 has posted a nice Vista tips:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=22503

    By the way: is the file wnaspi32.dll driver ASPI Nero burning application could install it. If you use Nero try to reinstall this app

  • Satellite L300-1BW - Vista cannot initialize properly

    Daughter has started nine laptop Satellite L300-1BW and can t use the laptop as their was a problem
    I need help to fix it.

    Windows Vista won t even not start. I put t know what is the problem.
    Diagnostics, he said that it s a root problem.

    Any help?

    Result of successful complete event log diagnosis
    error code = 0 x 0 time = 78 mins test internal State
    Code of erro chk full result sauce time = 0 x 0 = 31 mins
    Test test res com sauce eror code boot state = 0 x 0 time = 47 mins
    installation state chk com test result = 0x0 time = 452 mins
    found root cause failure current seup
    syastem details session disc = \device\ harddisk0 repertoire_windows = c:\windows autochk run = 0 root causes of num = 1 chk test updates comp error code from success = 0x0 time = 0 ms test disk diagnostic comp sucsees eror failure code = 0x0 time 94

    Root cause found - failure while playing.
    Also the Vista laptop, is a Toshiba Satellite L300-1BW 415,4 base all Toshiba more round, loading of innovation.

    Any help would be appreciated if anyone knows how to solve this problem and it didn t come with a Vista disk or recovery

    Thanks celticman

    Try the laptop from the recovery of HARD drive partition recovery.
    Do you know how to start this process? Isn't it?

    Immediately after the laptop has been turned on, press the F8 key.
    Then choose the first option called fix my computer
    Then choose recovery Toshiba (last option in a new window)
    Now the HARD drive should products.

    I think this should help you reinstall the Win Vista again and finally the installation of Vista successfully

    Good bye

  • Satellite U400 - cannot find HARD drive recovery option

    I'm doing a full recovery from the computer by using the HARD drive recovery procedure, but the problem that I can not find the entrance (to fix your computer) when I press F8 after you restart the computer.

    My laptop is: Toshiba Satellite U400-144
    Model: PSU40E - 03P00WAR

    Kindly advice what to do.

    Hello

    Normally, you can start the drive HARD recovery function if you press the F8 key to go into the advanced boot menu. After that, select Repair my computer and in the next window, you can choose the option of Toshiba HARD drive recovery.

    By the way: which OS you have installed right now? HARD drive recovery is possible on a preinstalled OS to Toshiba!

  • Satellite U400 - how to return to the format of partition with HDD Recovery

    Hello

    I bought a new notebook Satellite U400 with Vista Home preinstaled thereon.
    I went through the initial configuration and once it was done, I realized that making the partitions of HARD drive does not fit my needs.

    So I resised the partition of 'Vista' (acctually I shrunk it) and made the largest partition of 'Data'.
    I did not do anything with the hidden partition.

    Unfortunately, when I did this procedure I formatted the 'Data' partition.
    Now, when I want to make the backup with TOSHIBA Recovery Disc Creator DVD I got the error message saying that it is not possible because I formatted the 'Data' partition.

    Is there a suggestion how to fix this error?
    The system's fine, the only thing is that I'm not able to save and restore the operating system.

    Thanks Vecerka

    It wasn't good buddy. If you deleted the partition of HARD drive recovery, then you would not be able to restore it!

    Now, you need a new DVD of recovery!
    You can order using this Toshiba page:

    https://backupmedia.Toshiba.EU/landing.aspx

    It s a BACKUP TOSHIBA EUROPE MEDIA ONLINE STORE

  • Vista - icon scrolling on Satellite U400

    Help!

    I just bought a laptop Toshiba Satellite U400 under Vista Premium, and when I use it, a small icon appears which I think might have something to do with the scrolling of the elements.
    It drives me crazy. Does anyone know how to disable it please?

    Hello

    Have you already checked all the settings of the mouse? He should be here (virtual scrolling). What do you think?

  • Re: Satellite U400-138 don't go in mode sleep in Windows XP Home edition

    Help me...

    I just down-grade from Vista to XP. I have already installed the Windows XP SP3 home edition and solved the problems of sound card. I have already downloaded and installed all the drivers to support eu.thosiba...
    But still, I have a problem with the standby / suspend mode...
    My Satellite U400 - 138 (PSU44E) cannot go into stand-by mode. Everytime that I click on the stand by, the screen will "preparation of standby" then turns off, but there are things still on the hard drive and power led indicator I know that it is not in the standby mode, it is still white lamp, not a flashing red...
    To Hibernate there is no problem at all...

    Please help me...

    Thank you and best regards...
    ADI

    Hello

    I have a U400 also, but the PSU40E and installed Win XP SP3.
    I can use Hibernate mode and standby without big problems.

    Just a question; You update the BIOS?
    I did and installed the latest version of the BIOS from the page of the European driver Toshiba before I ve installed Win XP.

    In addition, I would like to know if you use the Toshiba Power saver.
    Toshiba Power saver was chosen in my power options Windows and I can go to sleep mode by pressing FN + F3.

    See you soon

  • Satellite U400 - can connect but the web pages are not displayed

    I have Toshiba Satellite U400 with Vista. I can't access the internet via the wireless network in my home.

    My computer connects with the network and the signal is excellent but Internet explorer is never able to display the web page. I followed the instructions to diagnose connection problems. I reset the network connection Windows network adapter, as suggested. He said while there still seems to be a problem with your connection, he tried a repair but the problem persists. He cannot communicate with the first DNS Server (212.77.192.59).

    My colleagues can access the internet with their computer, and I had no problem recently with connecting to other wireless networks in cafes and hotels.
    Can anyone help?

    Have you tried another browser like Firefox or have you only tried only Internet Explorer?

    You have DHCP or a static IP address? If you have DHCP make you you get the DNS server address automatically.
    If you have a static IP address, you must change the DNS address.

    In addition, you should try to update the driver for your laptop WiFi. See the Toshiba WLAN portal for an update:
    http://APS2.toshiba-tro.de/WLAN/

  • Satellite U400 - I confused speed up my system - removed desktop.ini icon

    Some time ago I moved (or deleted) a desktop.ini icon.
    This changed the way files/documents are stored on my computer.

    I get a lot of shortcuts that I did not do and seem to not be connected to anything.
    There are a lot of ntuser.ini and NTUSER. Icons DAT in different folders.

    The files are duplicated, and appear in paces I put them.
    No document is missing, but it takes time to find them; the logic of the production system seems to be lost.

    How to restore the original system? I don't remember when I made this mistake, and I wonder if I did a system restore or something like that could happen to all the software that I subsequently towards the down loaded.

    I'm not very expert in computers, as you may have guessed.

    I have Satellite U400 and Vista.

    Hello

    Have you tried using Windows Vista system restore? You can set the operating system goes back to an earlier era. Therefore, you must go into the advanced boot menu, select fix my computer, and then click System Restore.

    In the worst cases, you reinstall the full operating system. You can use the function of HARD drive recovery or the Toshiba Recovery disk you burning?

    Good luck!

    Welcome them

Maybe you are looking for

  • How can I control the NOR-5663 downconvert

    Hi, how are you doing. I have a NOR-5663, I want to make it as a spectrum analyzer. I need to deal with the problem of RF image. I work with Labview 2009. so I need independently control the downconvert of NOR-5663. Can I use OR - Tuner for Drevier?

  • TDMS write memory leak

    I use TDMS to store test data that seems to be causing a memory leak in my (very convincingly) program. Below is a graph of the three versions of my program. Series 1 uses storing data open PDM, the data file added and closed every 5 seconds. Series

  • 'VI is not executable' and lvlibp bug?

    I do this, but only with the installed Application.  The VI works fine in development.  The EXE frame works from the directory in which it gets built.  He just installed application that gets made a blunder. I have the complete development of LV2010

  • CiceroUIWndFrame

    When I try to restart or to shut down my computer this message always appears, and the computer will not shut down

  • Disappearance of the stop 'goodbye' message?

    Hello. I just noticed that in the thread on the latest firmware, someone asked if the rocket 'goodbye' message gone for others after the update of the firmware. The message "Goodbye" has disappeared on my own year last when the patch firmware.28. In