Satellite U400-183 lower upgrade to XP - driver for the SATA controller

Similar Questions

• I want to change my win8 to winxp for my laptop, but I cannot driver for the sata controller.

  Hello

  I have a laptop which is HP 2000-2d28CA laptop. I install 32-bit winxp for some software that I really need. I could not find the drivers for my laptop. My chipset is AMD ID1536 and shouthbridge is AMD A55/A60M and lds material are

  PCI\VEN_1022 & DEV_7804 & SUBSYS_2128103C & REV_00

  PCI\VEN_1022 & DEV_7804 & SUBSYS_2128103C

  PCI\VEN_1022 & DEV_7804 & CC_010601

  PCI\VEN_1022 & DEV_7804 & CC_0106

  Can someone help me for this

  Thank you

  You are the very welcome.

  Unfortunately, I wouldn't know how to help you with the problem you are experiencing.

  You can try W7 32 bit, but you have to hope that AMD has a 32-bit driver for the graphics card on your laptop because HP does not work.

• Driver for the graphics controller ATI Radeon® 9200

  Driver for the graphics controller ATI Radeon® 9200 for windows 7

  Hello

  read the following answes provided http://social.technet.microsoft.com/Forums/en-US/w7itprohardware/thread/712115f9-9416-42c1-9c7c-53b676692d3c

  Please click the checkbox as replied on this Page if this post solves your problem, as it helps others who need quick access to the answers THANKS AND GOOD LUCK

• Satellite Pro P200-14W and WXP - no driver for PC memory controller

  I installed Windows XP on the Satellite Pro P200-14W and installed all the drivers I could find on the Web of Toshiba site following the instructions provided.

  I always have a controller memory PC that appear in hardware Manager who is not driver related to it.

  My main problem however is that at random intervals (sometimes when you pull the power cable) the defects of the screen and turns into a mess of the desktop computer and the computer must be restarted because it does more. I tried several types of graphics drivers, but this does not stop the problem.

  Any ideas on how to solve this problem would be greatly appreciated.

  If you have installed XP on this laptop Vista you must also update the BIOS to the version of Windows XP.
  Seems that at this time it s a 5.00Win version of the BIOS.

  To get rid of the yellow exclamation mark in Device Manager, you must install the
  Flash Media Driver. This is the driver for your bridge Media Slot. This slot allows you to insert an SD card, Memory Stick (Pro) or xD picture cards.

  Good bye

• Compaq 610: [Compaq 610, P/N: NX550EA #ACB] latest driver for the SATA AHCI for Win 7 PRO SP1 RUS x 64 controller.

  Hello world!

  Could someone, please, tell me, why there is no driver SATA AHCI controller for Compaq 610 for Win 7 PRO SP1 RUS x 64 in the download section of HP support for Compaq 610?

  (01) where can I get the latest version of the SATA AHCI controller driver for Compaq 610 for Win 7 PRO SP1 RUS x 64?

  (02) the original Intel (r) Matrix Storage Manager V8.9.0. 1023 will replace the ' Standart controller SATA AHCI 1.0 (Microsoft) "(v. 21.06.2006 6.1.7601.18231) with the more recent/latest version?

  (03) will be the upgrade of the SATA AHCI driver improve the speed of read/write of my any percentage HARD drives or this idea is nonsense and absolutely useless?

  I'll be very grateful for any useful info! Respectfully, Tianuchka))

  Hello:

  I would use it to HP... the description tells you what it does.

  The HP 6910P has the same controller and chipset as the 610 HP.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3357379 & swItemId = ob_85204_3 & swEnvOid = 4059 #tab1

  Who answers your questions first 2.

  Regarding the 3rd, I don't know whether or not you notice an improvement.

  If you want to update the driver, you can also install the last utility Intel chipset installation from the link below.

  Download, unzip and run the setup.exe file.  Then restart the PC.

  https://Downloadcenter.Intel.com/download/20018/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets-zip-format

• Pavilion 500-424: loaded win7 need a driver for the USB controller

  We bought and installed Win7 Ultimate after creating the Win8 recovery media. I downloaded and installed the drivers for Win7, we checked before the change to verify that the drivers were available. It is an AMD System. In the section chipset, there are 6 pilots. 3 AMD and Intel 3. I've installed all the AMD, but I still have the "(USB) Universal Serial Bus controller" left uninstalled. I pulled on the records existing driver and he helped search the Web but I had no chance. Anyone know where I can get this driver?

  Hello:

  DL and install the drivers for the chipset directly to AMD.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

• Tecra 9000 running W2k - driver for the Audio controller problem!

  Help, please!

  I have a laptop Toshiba Tecra 9000 and recently discovered that the sound was no longer working. I'm not sure exactly when he first stopped working, but believe it was with MS Windows 2000 Updates or when cleaning PC after spyware attacks. While they inspected the real device (Yamaha AC - XG Audio Device), it has each if useful ""! "with a ' Code 10 - device cannot start", in the "Device status" screen
  I removed the device and allowed windows to detect & install, without success, then downloaded and tried many devices and generic drivers, drivers and
  even later as suggested on a Web of Toshiba site, I find
  http://EU.computers.Toshiba-Europe.com namely;

  Driver date: 22/05/2001 Version: 5.12.1.2138

  I'm at a complete loss as to why it has stopped working and what to try next to try and solve the problem. Any
  help or advice would be greatly appreciated.

  Concerning
  K

  Hello

  It is possible only after the installation of the MS Updates that the audio driver is blocked by a load of your system and no sound can be heard.

  If you want you can try to install this driver:
  http://drivers.Soft32.com/driver/download-Yamaha_AC_XG_Generic_Drivers_for_YMF753_743_752-24609.html

  It is useful after installing SP2. I don't know if this will help in your case, but you can try it.

  Good bye

• Satellite Pro A300D - driver for multimedia audio controller

  Hello

  I have Toshiba Satellite pro A300D and someday the built in mic, built into the camera and the speakers stopped working.

  When I checked the Device Manager, I saw that the driver for the multimedia controller wasn't working so I uninstalled and went on the toshiba site for the installation of the new driver.
  When I watched the drivers to my computer, they have everything except this driver!

  Is there anyone who knows were I can find it?
  I use the computer to work with the music and I'll record some people soon and I really need to work!

  Best regards

  Hermann

  Hi Hemmi,

  Interesting to know is which operating system you have.
  Can you post this information?

  Generally, all the drivers are placed on the Toshiba driver download page. There is an audio driver for normal output audio (speakers) and the webcam software. The latter you must also for micro because it s a part of webcam.

• Conversion of SSD drive for the reader to boot on m7 with Win8

  I just bought a new m7-j020dx (product code E4S19UA #ABA) with Windows 8 from Best Buy.  Unfortunately, it came with a standard hard disc (HDD), and I would like to install a Solid State Drive (SSD).  I have an Intel 320 and 530 series-reader.  But I was not able to get a bootable from that disc.

  The first thing I tried was cloning the drive to plant on a new disk of 530 series using AOMEI Backupper.  I got an error writing on the partition of the third.  I thought that maybe the drive was bad, so I tried again with an Intel 320 series SSD drive.  Same mistake.

  The next attempt was to clone the disk to another disk of 1 TB (connected via USB), reduce the main partition with MiniTool and clone of the 320 series SSD.  The cloning went well.  However, with the new installed SSD, the computer will not start, and I get "Error0x0000225", something about a file not found.  Disable "secure starting" in the BIOS setup has not helped (I did after the clone).

  So I thought I would do a clean install of win 8.  I generated a recovery on a 32 GB USB SanDisk player disc using Win8 recovery disk generator (as indicated on the site of HP).  I then ran the program of recovery out of the USB drive and after a few hours of software installation driver and several reboots, I get a message from HP, indicating that the installation was not complete.  Reinstall did not help.

  I don't know what the problem is.

  What the recovery disk USB one made from the original bad HARD drive (we get only a single shot at it)?  Do I need media of the order of HP on disks?  Are there problems with the use of SSDS on those computers?  Should I not a BIOS settig correctly (UEFI)?  Is there some Intel storage drivers clutter it?

  I think my next step will be to create a disc Image and place it on the SSD drive.  But I doubt that this solves the problem with the start to it.

  Another option might be to build fresh using Win8 media, then download and install each driver from the HP website.

  Any ideas out there in the land of the experts?

  Vachsen wrote:
  

  Thank you, erico, for advice.

  I tried this with 320 (160 GB) series and SSD 530 series (120 GB and 240 GB).  Actually, I have not tried on the 240GB again, just two other. . The 240 GB SSD is the best candidate. During cloning, using a larger SSD is the best for worms down the road when other programs are installed.

  So far, I've done everything suggested this that caramel:

  -Updated the BIOS for later: F.43. 03/01/2014 (HP support site).

  -Installed Intel Rapid Storage Technology v. 12.9.0.1001 (taken from the Intel site).

  -Updated the firmware of the 530 series 120 GB using Intel SSD Toolbox v2.0.10 of 06/20/2013 (from Intel).

  -The series 160 GB 320 firmware was up to date.

  -Installed the Data Migration Software Intel v. 2.0, dated 29/04/2013 (taken from the Intel site).

  -Updated environmental Support UEFI v5.3.3.0 dated 26/09/2013 (on the HP support site)

  -Enabled secure boot.

  Even using Data Migration tool Intel did not work.  Before Support UEFI environment, data migration tool would go to the step to reset but does not start what whether manually or to another.  Support UEFI environment, the software says simply "Operation failed." Following the manual data migration softwarecan be a bit tricky. There are a few things about the bootind of the Acronis loader * which must be carefully designed for the operation to succeed.  Intel also has a forum which can help as well.

  
  

  When I hit F10 and in the Configuration of the system, the Intel RST is not available.  So I suspect there is something not right here. The suggestion of updating the BIOS of caramel didn't across before it was made. It was not necessary and therefore not a good plan. I suggest that you use the Diagnostics UEFI and rollback to the previous BIOS. If you need advice with those just let me know. I have a few images that should show you what you should see. 

  A number of things, I noticed I did upgrades:

  -The site of HP support for my computer has Intel Rapid Storage Technology 12.0.7.1002 v, dated 30/06/2013 is earlier than on the Intel site.  Maybe I should roll back. That must be rolled back to the version shipped by HP. I see you introduced makes as stated in a previous post.

  -The HP support site has two distinct "RST", storage technology products a quick and a quick start technology.

  Intel has "RST" next to their rapid storage technology, so I might be confused.  I have installed the driver of the technology of quick start on the HP support site so if it is not already on the computer, perhaps it is not running and is the "RST" which is the missing piece.  In fact, same caramel said I need fast boot technology driver and then linked to download Rapid Storage Technology driver. Do not pay attention to what it says caramel.

  Here are two of the same?  Support site of HP with two drivers and version numbers, I suspect not.   Any ideas would be useful.  They are indeed different.

  The Intel Rapid Storage Technology softpaq sp61600.exe driver provides NCQ (native command qeueing) features for the SATA controller.

  The Intel Rapid storage Technology driver softpaq sp61325.exe is supposed to improve the SSD or mSATA consumption of hibernation and also imrove the resume from hibernation.

  You can't even consider installing either softpaq to clone the drive. It is always better to keep things simple.

  The SATA cable USB you use has two connectors usb at one end?  It is necessary to provide enough power for the SSD for data migration is not. Connect each usb connector to a different usb port.

  Dan

  Intel also recommends the free use of third parties such as cloning utilities

  http://www.EASEUS.com/disk-copy/

  http://Clonezilla.org/downloads.php

  http://www.partitionwizard.com/products.html

  EASEUS is, in my opinion, the best of the three.

• Driver for multimedia Audio Controller for complete model of PC of HP Compaq nc6120

  Where can I get the driver for the audio controller of the subject? I have the following info from Device Manager:

  ID of Instance of device: PCI VEN_8086 & DEV_266E & SUBSYS_099C103C & REV_03\3 & B1BFB68 & 0 & f2

  Hardware ID:

  PCI\VEN_8086 & DEV_266E & SUBSYS_099C103C & REV_03

  PCI\VEN_8086 & DEV_266E & SUBSYS_099C103C

  PCI\VEN_8086 & DEV_266E & CC_040100

  PCI\VEN_8086 & DEV_266E & CC_0401

  My OS is Windows XP Pro Version 2002, SP3

  Erhan

  [email protected]

  Hi, Erhan:

  This should be the driver that you need for this device.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=0&prodSeriesId=447346&prodNameId=447347&swEnvOID=1093&swLang=8&mode=2&TaskID=135&swItem=ob-45726-1

  Best regards

  Paul

• where can I download the driver for xp ethernet controller

  I need the driver for the ethernet controller

  Find out what the brand/model of your system / motherboard. Go to the manufacturer's website. Download then install

• Satellite U400-183 - need Recovery DVD and AHCI drivers

  Hello

  I tried to reinstall Win Vista Home Premium to my Satellite U400-183. I used a DVD OS Win that came with my other laptop to other manufacturing and the key that came with my Toshiba laptop. Everything works beautifully, but in some areas of Windows is still some specific parameters of the manufacturing on the other. Now is it possible to get a DVD of Windows Vista Toshiba?

  Another question is where can I get the AHCI drivers. There is only an exe file on the support site which I can't use during the installation of Windows. There must be some these .sys files, but I can't find them on the Toshiba site, so I had to install Windows in compatibility mode.

  Thanks in advance!

  PS: Sorry for my bad English, I'm from the Germany...

  Hello!

  A new recovery DVDs, you can get your local ASP (authorized service provider).
  Or you order a DVD from Toshiba directly:
  https://backupmedia.Toshiba.EU/landing.aspx

  The AHCI drivers or let say Intel Storage Manager, you can download from the Toshiba site as you have already said.
  The .exe file, you must check out to use during the installation, but with the recovery disk you n t need them.
  Please read the readme file in the Storage Manager, there is an example how to extract it. Use the command line what it
  For example: - a - a - PC:------.

  Good bye

• Satellite A210-1BQ - need Dual Mode Pad Driver for Win 7

  Hello

  I have a Satellite A210-1BQ and installed Windows 7 above.
  But niw, my work doesn´t of the Dual Mode button.
  The work of drivers for Windows Vista don t.

  So is there a special driver for Windows 7?
  I m now works with a MS Wireless Mobile Mouse 6000. This mouse replaces the driver for the Touchpad?
  I tried FN + F9 and I uninstalled all of the mouse on the laptop driver, but it won´t work.

  Hello

  I assume you are using Win7 32 bit version, right?
  Did you clean Win7 installation or you have upgraded Vista to Win7?

  Generally speaking if you can't find the version Win7 Vista driver should work.
  Which we tested, ALPS, Synaptics, or both?

  If you use an external mouse and use a specific driver for it. do not crush the touchpad.

• Satellite C850-1E7 - what SSD can I use for the upgrade?

  Hi all

  I am looking for one SSD hard drive.
  Problem is the documentation does not specify whether the system is Sata 3 GB or 6 GB.
  I understand that if I buy a 6 GB SSD and the system supports only 3 GB, there is work, but I would rather try to localize "cheaper" 3 Gb SSD if the system supports up to that speed.

  Look under the hood, the current HARD drive is a SATA 3 Gb.
  Any of you know?

  Satellite C850-1E7 (serial: YC325575R)

  Thanks for any help.
  See you soon
  Chris

  Hello

  You could easily find what SATA controller not Satellite C850-1E7 support.
  Different hardware diagnostic tools she will provide you with details.
  I recommend you to install and test software like Sisoft SANDRA or Everest Home Edition.
  Both will provide the device properties built in Notepad.

  But I think that the device supports the SATA II (300Mbit/s) controller.

  > I understand that if I buy a 6 GB SSD and the system supports only 3 GB work remains
  Yes, it's okay because the SATA controller is compatible to the bottom

• Satellite L505 - installation of Windows 7 can't find driver for the DVD

  Hello

  I bought a Satellite L505 with Windows 7 home 64 bit. Now, I want to install Windows 7 Professional 64 bit. However when the installation starts he reports that it cannot find a driver for the DVD.

  Who can help

  Concerning

  P. Engels

  Hey,.

  If you do a search on Google you will find a lot of results on this error message and in general it s associated with the middle of the installation (DVD itself).

  Do you use an original disc of Microsoft Windows 7, or is it a copy to a friend?

  You should only use the Microsoft original disks with valid software.