Satellite U500 - freezes after upgrade to Windows 7

Similar Questions

• Satellite U500 freeze after installing the Nvidia display driver

  I just did a clean install of Windows 7 Professional 64 bit on my machine and tried to install the drivers from the Toshiba site. However, after the installation of the driver and restarted, the l' ordinateur computer seems to be ok for a few seconds and then the screen just hangs and I have to start cold in SafeMode so that it works.

  I tried to disable the Nvidia Driver Helper Service, but it does not at all help. The machine can only be started in safe mode. The laptop was originally with Windows 7 Home premium, 64-bit and it worked well.

  Someone knows this, and what was your solution? Thanks for your help!

  -----------------------------------------------------------------
  Satellite U500 - 18L PSU8CE
  Windows 7 Pro 64-bit
  NVIDIA Geforce210m

  Hello

  Have you installed other drivers on the Toshiba site, too? Such a question would normally be typical of 3rd third party drivers use
  Have you installed the drivers from the chipset first?

  Maybe you need to restore the factory settings. With these settings, everything is pretested and configured for more stable parameters.

• Satellite L300D BSOD after upgrade to Windows 7

  I got this laptop (Satellite L300D) for a little more than a year with windows vista (32-bit) running and there were no problems. However, I've recently upgraded to Windows 7 (x 64) and became the problems since the first reboot.

  On the first reboot after installing windows 7, the computer off just after the "Starting Windows" screen Turn on again took me to the repair of the system where he performed a system restore and I was able to start successfully even once. I thought that the problem had something to do with the automatic updates, so I disabled the and tried to restart to see if the problem has been corrected. This time, after the "Starting Windows" screen I got a BSOD of unrecoverable system error. After several attempts to reboot and multiple attempts to repair system (which usually says she didn't) it started correctly again.

  This problem has been going for about 3 weeks now and it is quite irritating. The results of the system of compensation for claims that a "Boot critical file is corrupt", but it starts eventually after several attempts to start. He also has a habit of turning at random during the race (it happens about once or twice a day). So from now on, whenever I chaque fois que je tente tries to start my computer it shuts down after the start screen or give the BSOD and restarts and the only way to make it work seems to be to keep trying to start and hope for a successful boot of the system upward (this happens finally after a few failed attempts).

  I did some research on this and came to [this | 1251 http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?modelFilter=L300D-ST3501&rpn=PSLC8U&category=&selCategory=3&moid=222 & os = & ct = DL & selFamily = 1073768663] page. I think that's exactly what my problem is (need to update the BIOS), but if I understand correctly installing windows to do this only for 2000/xp/vista and I am unable to use the second option to boot from the disc as I get the BSOD before he gets to that point. I should try the windows install option although I am running windows 7 or is there another way to update the BIOS? Or I'm off completely and the problem is with something else?

  I wasn't sure what information I would like to add to this post so if need more information please let me know.

  Thanks in advance

  Edit: Oops, just realized the page I linked is not link to exactly what I had opened. I do not speak of 'critical BIOS updates for Windows 7 64-bit' under 'support form '.

  Post edited by: Jacob27

  Hello

  First of all, it would be interesting to know what code BSOD, you get exactly. Can you post this information useful? Normally, on the Microsoft Knowledge Base, you can find additional information about most of the BSOD codes and so you can start to solve this problem.

  BSODS are often associated with drivers or RAM/HDD. The latter, you can check with special diagnostic tools, Memtest86 for RAM and Drive Fitness Test for the HARD drive. These two tools are free and you can find it using Google. You can download an iso image of them to create a bootable media where you can start the test.

  Regarding your update to the BIOS: I put t know what L300D you have exactly, but according to the Toshiba site it shows an update of the BIOS also for Windows 7 64-bit. You can try to install it.

• Satellite Pro L40 - after upgrade to Windows 7, the FN keys do not work

  Hello world

  I have a Satellite Pro L40 PSL4BE and have just upgraded to Windows 7. Since the upgrade I can no longer use the function key and the top and down arrows to control the volume. Keys F6 F7 & still control the brightness so I don't know the function key still works.

  Anyone know if it is a driver problem or nobody knows how to solve this problem?

  Thank you

  Drew.

  Hello

  You need to install the package of value added for Satellite Pro L40. This package contains all the necessary drivers for the FN keys. Then please install or update VAP if you have already installed an earlier version.
  Here you can download: http://eu.computers.toshiba-europe.com > support & downloads > download drivers

  Can you confirm that FN keys work with installed VAP?

• Re: Satellite A300 - battery after upgrading to Windows 7

  Hi all

  I have with me the notebook toshiba Satellite A300.
  Bought the UNITED Arab Emirates. I just upgraded my pc to windows 7 and it seems to have affected my battery life, I guess.

  Anyone has idea about hw long battery last, I mean hours.

  Now, I can only use it for nearley 30 min... Some blog said of updateing the bios.

  Is this the reason realley or is the problem of windows 7 with my battery, experts advise please.

  Thank you, vb sbar

  Hello

  I don't know if the update of the BIOS would help, but if the new BIOS is available for you notebook series, then it s a m updated value.

  But you should also check the Win 7 power management settings.
  Please check this Toshiba HowTo:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=41

  It s on vista but Vista power management is very similar to Windows 7.

  Here you must change the battery more user-friendly options.
  Check it!

• Pavilion dv6-1216sa: Startup freezes after upgrade to Windows 10

  Hello

  I upgraded my computer pavilion laptop Windows 10. Everything works fine EXCEPT at the start where it freezes about 15 seconds in Windows startup. I have to hold the power button to do a hard reboot, and then it starts always well the second time.

  This always occurs on a cold, but don't start not on restart, when it restarts fine without problems.

  I updated the Bios to the latest version and drivers that could be the cause, but I still have this problem. Any other ideas?

  Rob.

  Hello

  It might help, I had the same problem and by disabling the quick start, it has been resolved. Go to control panel > power options > Control Panel. Click on "change settings that are currently unavailable" and the tick of the United Nations turn to the QuickStart area, click on save changes.  Turn off the switch and then back on and I hope that everything will be fine.

• Video playback freezes after upgrade to Windows XP SP3

  Since your update to service pack 3 my look on Internet Explorer the TV started to freeze every few seconds, can you tell me why this is happening now. It was perfect before. Thank you

  My operating system is windows XP. My video card is NVIDIA

  Hello

  · What version of Internet Explore on the computer?

  · This happens when plying the video on a particular Web site?

  You can download and install the latest version of adobe flash player on your computer and check if it helps.

  Uninstall the previous version of Adobe. Link for reference: Uninstall Flash Player | Windows: http://kb2.adobe.com/cps/141/tn_14157.html

  Install the latest version from the following link: Adobe Flash Player Support Center: http://www.adobe.com/support/flashplayer/downloads.html

• No CD/DVD drive after upgrade of Windows 8 on Satellite Pro S300L

  The cd Rom drive no longer works after upgrade to Windows 8.
  The drive is not displayed in the Solution Explorer, either. It is mentioned: error in the register.

  I can not change the right driver in Device Manager - probably it was deleted.
  Is the driver of the * MATHSITA DVD-RAM UJ880AS drive * for Windows 8 available?

  How can I make my cd Rom drive working again?
  How can I fix the error?

  Could guide you me in registry change (upper and lower filters) if necessary?

  Post edited by: GRIX

  Hello

  Check please follow thread - http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=68988

  Here, you can find the solution to your problem.

• Satellite A300D-15B - Webcam does not work after upgrade to Windows 7

  My webcam does not work after upgrade to Windows 7. I installed the drivers but still having no luck

  Hey Buddy,

  What does it mean exactly when you say he won t work?
  You get an error message or only a black image? What model of laptop you have and that you use the Toshiba Windows 7 upgrade kit or a disc of Microsoft?

  At this moment I can only offers to install latest driver of the webcam of the official website of Toshiba. Make sure that this driver is released for Windows 7 and not Vista.

• Why the back my mail list, text and phone iphone 6 freeze after upgrade ios10

  Why my list of e-mail, text and phone iphone 6 freezes after upgrade ios10?  Have you tried to turn it back on.  Becomes a real pain in the uknowwhat.

  I had the same problem at first but I was testing the first version of ios 10.  but the reason may be due to the low storage? If your storage space is ok please go to settings then general try to look for the software update again just to make sure that you use the latest version of ios usually there a few times an update immediately. If none of these solve the problem, try now button the power button and the home button at the same time (the screen of your iphone turns off a few seconds) touches both simultaneously when you see the apple logo on your screen if all else fails you can try connecting your device to itunes on a pc and run a quick diagnostic test? you go to itunes on a pc if you have already installed on your pc, laptop etc... Look at the upper left side... Click the help... Go to the bottom of the list to "Start the diagnosis" (make sure that all the test boxes have a tick and click ok to run the test) PLEASE NOTE your iphone you will need to be connected to the computer before hand... hope this will help you know if there is a problem, but when I came across this problem with my camera it was because my storage was almost full on my device and in icloud if This is the case then you need to maybe buy more storage or delete applications or games, you do not use this should help solve the problem of storage (if your device is low on storage)? hope this helps somehow.

  Nice day.

• Apple Software Update will NOT work after upgrading to Windows 7

  Apple Software Update will NOT work after upgrading to Windows 7

  flyboy340 wrote:

  Apple Software Update will NOT work after upgrading to Windows 7

  More information is needed.

  Which machine you use, OS X are you running?

  Windows 7 running in BootCamp?

  The OS X app store is not present at all?

  AppStore is present but the update tab does not?

• 700 - 230qe envy: after upgrade to Windows 10, I have no sound

  I have no sound after upgrading to Windows 10.  When I try to update driver I get error 0x8007001f Audio device IDT High Definition Audio CODEC.    Also get audio servicd without answering

  @gemini2

  Try this.

  1. Select the CODEC Audio IDT high definition in Device Manager.
  2. Select the driver tab.
  3. Click on update driver... button.
  4. -> Select Browse my computer for driver software.
  5. Select-> Let pick me from a list of drivers for devices on my computer.
  6. Select high definition Audio Device (not IDT High Def... that's important...) and click Next. Displays warning message, but the answer Yes.

  REO

• Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate

  My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.

  Help please

  Hi asalamk,

  The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools

  You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.

• HP ProBook 450 G0: Problems of HP ProBook G0 450 icons after upgrade to Windows 10

  Hello

  2 days ago that I have upgraded to Windows 10 my HP ProBook 450 G0.

  Then I realized my graphics drivers are not working, I tried to update to the last registered in the section to download the drivers for my model.

  After that, I got BSOD and couldn't even see login screen. I removed the update installed in safe mode.

  If at the moment I use some default driver I guess.

  In the Device Manager on Intel(r) HD Graphics 4000 I something like (manual translation) "Windows has stopped this device because of disorders raported. (Code 43) ».

  I can't use the HDMI & display internal. To use the HDMI, I have to restart my PC. After using HDMI, I can't use internal display. A lot of questions, because this driver...

  I really need this, as I am a teacher and I ', using both internal display & HDMI for presentations...

  All solutions? All the newspapers that I can get to help you help me ?

  Kind regards

  Jakub Krol.

  Hello

  In case anyone is interested, my PC is now fixed

  More information: https://windowsforum.com/threads/graphics-issues-after-upgrade-to-windows-10-system_service_exception-sgfxk64-sys.220205/page-2 .

  Kind regards

  JK.

• HP Touchsmart 23-d055: do I need a new recovery disk after upgrade to Windows 10?

  I upgraded my 2 years, HP Touchsmart in Windows 8 for Windows 8.1 for Windows 10. It took me 6 hours to run all of these updates.

  Now, HP Support Assistant keeps reminding me to create an image of system recovery. But when I run the recovery media creation utility, it warns me that he goes back to the original operating system (Win8). Is it possible to create a recovery image system for my machine on Windows 10?

  I know that Windows 10 now has an automatic recovery partition. But I am concerned by the failure of the disk, which would make this unnecessary partition. Last year, when I've upgraded to win 8.1, I had an alteration of the disc that has occurred without known reason. I lost everything on the PC and to restore Win 8, and I've never touched the PC up to 10 Windows free update is out.

  I created a USB Win8 recovery disk when I got the machine. This is my only alternative? I suppose that if I ran the recovery media creation utility, it would recreate just the same.

  BTW, I know that HP has here a document, but it does on computers provided with Windows installed 10.

  • HP computers - create and use a Microsoft recovery USB drive (Windows 10)
  • http://support.HP.com/us-en/document/c04641788

  Thank you for your help and experience.

  Since no one has replied with an answer to my question, I've finally worked it on my own. I learned that you cannot make a new recovery disk system after the upgrade to Windows 10, if you had already created one when you got your machine under Windows 8.x

  Context: after upgrade to Windows 10, the HP Support Assistant kept prompting me to create a system recovery disk.  I did one when I got the machine 2 years with Win8.  I didn't replace my original recovery disk, so I went out and got a new 16GB USB flash drive. When I inserted this new drive and attempted to create a recovery disk, the PC told me I couldn't do one, because you are allowed to make a recovery disc by PC.

  So it was kind of stupid that after completing the upgrade of Windows 10, HP Support Assistant tells people to do. It should just check itself and see if a disc has already been done. All this anguish for nothing!