Satellite U500 - recovery procedure take long

Similar Questions

• Satellite P100 - recovery disk no longer works after you start

  Hi, I tried to use the disk recovery toshiba last night and it did not work. He worked twice before.

  The laptop starts with the cd drive and says it's loading ramdisk Image. It then loads the image and request that if I want to add a SCSI controller, before I can say anything he says 'Please wait', and then restarts the computer and re-trys the previous steps.

  A that someone has experienced this problem? Can anyone offer advice?

  I hope someone can help

  Ben

  Hi Ben

  Sorry, but I'm a little confused. You wrote about Microsoft CD or DVD recovery facilities you have with your laptop?

  I ask this question because, as far as I know, by its use of origin designed Toshiba recovery image the user should not get much just recovery procedure without adding any controllers or similar stuff.

• Satellite M40: Recovery Procedure hangs on reboot after using the recovery CD

  Hi all

  I have a clients Sat M40-197, which was badly marred by malware that I did a full restore using the supplied disc that has the number of product PMR400490EN0. After the reboot, the system hangs just in normal mode and safe mode, I noticed that the last connected line is Mup.sys, but even in this mode the system always starts. I tried to use Ghost in advanced mode do not resize the partition, but not matter what I try, I can't start.

  Before taking what I think, this is my only option to use a standard OEM XP Home disk and the installation using the supplied product key I was wondering if anyone had solutions to this?

  Thanks in advance.

  Hello

  First looks like a mistake to restore CD. I mean it s possible that the CD is damaged or whatever and then some data is maybe damaged.

  If this isn't the case, then I guess that the following reasons:

  -HARD disk no is not correctly formatted-> reformat it completely and create a LARGE partition
  -HARD disk is defective-> check the HARD drive with a special HARD drive tool of the manufacturer (in most cases you can download it from the manufacturer's Web site)
  You can also download "UBCD4WIN" (just google for it) and check your HARD disk with built-in tools
  -Memory could be faulty-> use the "UBCD4WIN" and check the memory with "PI" or "SuperPI".

  She's...
  ;)

  Welcome them

• Satellite U500 - take a long time to start Windows

  Hello. How are you all? I need your help.

  my laptop Info: Satellite U500 - 18K (PSU8SE) operating system: Windows 7 64-bit

  My problem:
  My time to take cell phone longer than usual to start windows and that I know and look for changes in startup programs list but cannot find changes, I have also all the necessary updates for my laptop and there are no performed by viruses.
  I tried to use system restore, but it has not solved the problem...

  So please help me to get the solution?

  You should check if the tempro installed on your computer, this utility can cause a lot of time to boot. Also check if installed face recognition software

• Satellite A30: HDD size after the recovery procedure and Defrag

  I have a Satellite A30 and just did a complete reinstall from the recovery of the product disks. My question relates to the amount of disk space hard should be resumed aftre reinstall it.
  My hard drive is 4.95 full GB according to the procedure that is much higher than I expected.

  Also, after reviewing the reader with Defragmenter I seem to have twice taken up training with Greens, unmovable files like Blue contiguous files. Unmovable files is there and if not how to I remove them?

  It's where I guess that extra hard disk space is lost when it is lost?

  Thank you

  Hello

  It's not easy to say exactly how much space should be taken after the recovery procedure.
  I have so much that I know on the recovery CD, you will find the whole operating system Windows XP, driver Toshiba and utilities as well as additional software like OneNote, WinDVD, etc.
  This additional software could take as much space on the disk outside the OS.

  Blue not moveable files belong to the Windows operating system, and as a result, the files are placed together.

• Satellite U500-1DV - recovery disk does not work

  Satellite U500-1DV
  When windows starts up the first time, and while Toshiba request is things installation and system configuration, Windows crashes and restarts the system.
  What can I do? It happens every time.

  Thank you

  It may be the laptop computer hardware problem or recovery disk.
  You can try to start the installation using another disk installation disc for example clean Microsoft Win 7.

  If the installation would be functions, then your laptop s material should be ok and the problem is with the recovery disk

• Satellite U500-10F - creating recovery disk after upgrade Windows 7

  I bought a Satellite U500-10th with Vista OS and I decided to upgrade to Windows 7, so I ordered at Toshiba upgrade disk and installed it.

  * My question is *: * it is possible to create with Windows 7 recovery discs? * in order to avoid the downside to install vista first then do the upgrade to windows 7

  Whenever I need to do a clean install and also to avoid the disadvantage that it is not too recommended to validate windows whenever you perform a clean installation, because the problems of authenticity can emerge with microsoft!

  Thank you

  Hi m.tarek,

  I doubt that this would be possible. First of all, you have ordered only an upgrade, which means that this version can be installed on a pre-installed version of Vista. It is not a full version that you can install without BONES.

  Besides recovering the files on the second partition (btw, that's a picture) contains the Vista operating system and not Windows 7. It does not update.

  Sorry mate, but this is why there will always be this update of s. Alternative, you can create your own image using Acronis True Image or other imaging software.

• Satellite U500-17F - need Windows 7 for 64-bit recovery disc

  Hello

  I'm looking for someone who is able to copy for me * recovery disk Home Premium Windows 7 64-bit partition for Toshiba Satellite U500-17F * (Czech language - or in English). I resized the partition and delete windows 7 recovery disc, and now I need to reinstall because of disk problems. I don't want to buy a copy because I bought satellite toshiba with windows 7 and why pay twice for the same thing.

  Please let me know if you are able to copy the disc of recovery for me and put it to a web page that I can download it from. You can make a password to avoid abuses.
  I can give you a small donation on paypal.

  Martin

  Hi spurnymartin,

  > removed windows 7 recovery disk
  To be honest that s does not erase. Did you delete the folder in HARD drive recovery or what exactly?

  Usually, you can reinstall Windows drive HARD or Toshiba recovery disc.

  If you n t have it more, you can order the CD from Toshiba. In my opinion you n t pay twice for the same thing because it s not a Toshiba error.

• Satellite U500-17F - problem of calibration by trying to create the recovery disk

  I have exactly the same problem with the calibration by trying to create a recovery on Maxell DVD media disc + R I tried twice 2 DVD different each with the same error. Then I burned one of them on my desktop without any problem. When I tried an Emtec DVD + R support on the laptop it burned successfully.
  The laptop is Satellite U500-17F with Mat * un DVD-RAM UJ862AS. There is an incompatibility of Mat * one disc with Maxell DVD and must be fixed with a firmware update but Mat * one did not like.

  Hello

  I had a problem with a different disc from different manufacturers.
  Finally, I tested the TDK and Verbatim and could create the recovery disk using DVD R media!

  Test other brands!

• Satellite A100 system goes to a black screen after the recovery procedure

  I tried running the recovery CD, I received on my cell phone. the process perfectly, (I have only one CD, I don't know if I need a second). At the end of the process, I have the option to insert the second CD, or jump.
  Because I don't have that one CD I have support on ignore.

  I tells me that the installation is complete and I can restart my system.
  Then I removed the disk and I tried to reboot the system. The system goes to a black screen (on which he indicates that Microsoft load) and then crashes. That was the problem I was facing before recovery.

  Basically, the recovery process has not worked. I don't think I did something very wrong, unless I need a second CD. What could be the problem?

  Help me please!

  Hello

  The A100 is one of the new series of laptops and AFAIK the image of Toshiba was placed only on a CD (DVD) recovery.
  I think that the message and the possibility to insert the second CDconfuses a little.

  In my opinion the black screen and freeze has nothing to do with the recovery procedure and the new installation if Windows OS.
  Due to the fact that this problem has occurred until you have installed the OS from the recovery CD, I assume that there must be something wrong with the hardware.

  But it s very interesting to know if the same problem appears after the new installation of Windows from the original CD of Microsoft.

  It's worth a try.

• Satellite U500 - USB2.0 UVC webcam no longer works

  Hello

  I just upgraded my Skype to the latest version and now my integrated webcam usb2.0 UVC does more work. In fact, she seems to light (blue light that appears next to it on my screen) but the image is black with a grey circle search turning in the middle.
  My PC is a Satellite U500-1DZ.
  To be honest, not been use my webcam for 3 months before that, but the last time worked perfectly with the old version of Skype

  At the same time, my Council of Toshiba Tempro update me my driver my BIOS and display
  I tried to do this several times but it doesn't work.
  For the BIOS, I'm just able to download 44% of it, and then it just stops. Same with the display driver.

  These 2 problems could be related?
  What can I do?

  Thanks in advance for your help and response

  It is not easy to say what the problem is here, but what you can try is to reinstall the software of the webcam of the Toshiba download page and check again.

  If there is no problem with your laptop, in my view, there is no reason for updates, including BIOS update.

  Anyway, the latest versions, you can find on Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp
  Check it out.

• Satellite U500 - 18L - need new Toshiba Recovery disk

  Welcome

  I have a Satellite U500 - 18L and two have been subjected to a major outage,

  I need to use the restore disc, but I forgot that I have create a restore disc.

  I ask those who have the same model that creates a disk and then download any download site.

  Thank you

  Hi higry,

  If you don t have this disc it's no problem because you can order it at Toshiba directly:
  https://backupmedia.Toshiba.EU/landing.aspx

  Alternative install Windows from a Microsoft disc if you have such a drive and download all the drivers from Toshiba page.

• Satellite A100 loads the operating system correctly after the recovery procedure

  Hello

  I'm in trouble... I used the recovery CD last week after my laptop developed problems. After the recovery procedure, when I turn on the pc, it loads directly in mode 'Owner' - the pilot of the internet has no charge, Norton AV, supplied with the pc does not load. Basically, it's a shadow of his former self.

  And when I try and start the recovery process, that it doesn't... it does not read the disc.
  I know that the recovery process did not work properly cos when I look in C: it shows that 60 GB of data is present on the hard disk, so the recovery is not cleaned the hard drive at all.

  The only way I can describe it, is that the pc is in some sort of limbo. I can't access the original account I created.

  The recovery disk is still okay because I "explored" the drive on another computer and it contains all the data.

  Help, please.

  Looks a bit the problem I have with an A100 recovery disk. Mine formatted PC, unpack
  a load of stuff and then freezes.
  See...
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=31292

  Like you, I can read the DVD in another PC. I wonder if there is a batch of duff of recovery DVD?

  I think I'll try to install XP from a different installation disk. It'll be a bit of a pain in the neck
  because it will not authenticate with MS, but at least he's going to prove whether or not the hardware of the laptop is duff.

  I'll post back here when (if) I get anywhere.

• Satellite M45-S269 - A:\GHOST output. ERR during the recovery procedure

  I am trying to perform a full system restore. I get to the part that says "exit A:\GHOST. MADE A MISTAKE? »

  If I do Y or N the message says "cannot read files. If the problem persists, contact TOSHIBA support center or contact symantec technical support.
  Then the recovery fails.

  Clues?

  Hello

  Looks like it's not possible to read from the recovery disc.
  How did you perform the recovery procedure?

  You have inserted the right recovery disk and started from this disk. Right?
  Usually, recovery is expected to begin and the installation should run smoothly

  If this is not the case then recovery disks would be destruction, scratched, etc.

  Just a question; is it possible to start using other disk bootable CD original Win XP or Linux?
  Select this check box, because it would allow to discover exactly what s wrong

• Satellite U500-1F5: eco and FN buttons do not work after BIOS update

  Hello world

  I hope I can find a solution for my problems here.

  I bought a new Toshiba Satellite U500 (PSU9ME),
  I'm updating my laptop regularly whenever I get alert through TEMPRO or Toshiba service center.

  Last week I received an alert to updat the BIOS and I did. Since then, I've noticed the following problems:

  1 eco utility does not work, and when I tried to uninstall, it says (not supported BIOS)
  2. on screen funtion buttons that appear at the top of the screen when you press the Fn key no longer not apear
  3. the touchpad lock / unlock button does not work, and even by pressing Fn + F9 doesnot lock

  I hope you can give me an answer about my problems,
  I already downloaded the latest updates for the eco and value-added packege of the toshiba site and install,

  BUT

  does not my prob

  still eco utility does not work. The msg (not supported BIOS), appear when I run the update.

  The bar of buttons on the top of the screen does not (even after I uninstall the package of value of toshiba and re - install the last being) and the locking/unlocking back touch button does not work.

  I hope Toshiba can find me a solution, coz I don't have time to go to the DEPOT
  PSU9ME00D00XAR model U500-1F5

  Windows 7 (64)

  Thanks in advance

  Hello

  First one comment:
  * I am updating my laptop regularly whenever I get alert through TEMPRO or Toshiba service center. *
  That s is nice, but certainly not necessary. When the system is working, do not touch or change anything. Maybe stupid sounds now, but I recommend you to remove the TEMPRO system. Believe me you don't need. I have 2 years old Satellite A300 and original BIOS. It works perfectly and I don't want to take any chances and to change what anyone. Since last month, I have the Satellite U500-1EX and will do the same. TEMPRO is already removed, and I am happy with the factory settings.

  All that you have done is OK, but at least you can try to reinstall entire OS now using HDD recovery option (F8 at startup) to see if everything works well again. Sorry, but if this will not help, I think that you need the BIOS downgrade to the old version.