Satellite U500 start problem - "your computer could not be started."

Similar Questions

• Error, your computer could not reboot after a unexpected, stuck on the black screen

  Original title: Vista startup repair freezes after that give the message "your computer could not restart" and he said that it is looking for problems. I use the original windows disc

  We had a power failure and the computer showed only a black screen.  When I rebooted it, she ran correct problems and they went to green the black screen with scrolling icon on the bottom, which freezes after 30 seconds or more.  I put in the original disc of Vista and ran the fix repairs.  He said it is looking for the most likely, but freezes with blue tab, stopping in the middle of the page.  any thoughts?

  Hello

  You get an error message or code?

  Method 1:

  First of all I suggest you to disconnect all devices external one except keyboard and mouse and try to start your computer and check.

  Method 2:

  Step 1:

  I also suggest you try to start the computer in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you're able to boot in safe mode, you can perform the system restore to the date when the computer was working fine and check.

  Step 2:

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Access the link below for more information on the Startup Repair:

  Startup Repair: frequently asked questions

  
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode-1

  Hope this helps and keep us informed if you need help.

• Visat, "your computer could not start" after Microsoft updates.

  I have a client computer after the automatic updates that it can no longer start, I can restore to a valid restore point before the updates, but the next day auto updates re - installs only them and it does not start.

  Automatic recovery cannot recover, the only way I can start system restore points.  There is no new hardware or software installed on this computer other than MS. updates

  This is a client computer and requires automatic updates.  How to make automatic updates work?  If they simply do not work, how can I disable these 6 loading but updates to the updates load?

  Bad update is one or more of the following:

  KB2478660

  KB2518866

  KB2478663

  KB2518870

  KB2541763

  KB2545698

  PC Toshiba laptop satellite

  VISTA Home Premium service pack 2

  I understand, identify the problem and do not load, thanks, it is useful, but what is my risk to not load this update.  This is a critical update and I can not load without compromising my machine, but it is essential, then what I lose?

  KB2478660 - NET

  Description

  http://support.Microsoft.com/kb/2478660

  Download

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26303

  ___________________________________________________________

  KB2518866 - NET

  Description

  http://support.Microsoft.com/kb/2518866

  Download

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26322

  ___________________________________________________________

  KB2478663 - NET

  Description

  http://support.Microsoft.com/kb/2478663

  Download

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26312

  __________________________________________________________

  KB2518870 - NET

  Description

  http://support.Microsoft.com/kb/2518870

  Download

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26409

  ______________________________________________________________

  KB2541763 - Internet Explorer

  Description

  http://support.Microsoft.com/kb/2541763

  Download

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26582

  ____________________________________________________________

  KB2545698 - Internet Explorer 9

  Description

  http://support.Microsoft.com/kb/2545698

  download above link

  _________________________________________________________________

  the 1st 4 are to do with Net Framework

  You should check what's on this machine and see if updates are required so that the customer needs

  or ask in the correct forum because I already advised you to do

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• "Your computer could not renew its address from the network (from the DHCP server) for the network card"?

  I saw this question posted several times here, but I can't find someone who has exactly the same problem I have.

  This problem started a week ago. Basically, my computer loses its connection ethernet once per hour to around the same exact time. which is only for about 5 seconds, but it's enough to get Skype and other things while I'm working, and it's very frustrating because I use Skype to talk with customers, and it looks unprofessional when my calls fall every single time. my computer can also use wireless (which does not go down), but he's too unstable for my work.

  now on the error message I posted. I get this error in my observer of events in about 30 minutes until my ethernet goes down, so I don't know if they are interlaced or not, because I don't get any errors when my ethernet really crashes.

  Here's what I've tried so far without success:

  -temporarily disable the firewall and antivirus

  -updated driver for both my wired network cards and wireless (both were UTD)

  I don't know what to do because I've never had this problem before.

  Here is some information on my computer if that helps all:

  OS: windows 7 Home premium (x 64-bit)

  computer model: gateway DX4870

  Look on the side of the router and make sure that the DHCP lease time has not set to 60 minutes.  As a simple solution you can just assign a reserved DHCP or a static address to the computer (in the router).

  PS: You'll find the DHCP lease on the map with the command ipconfig/all command at a command prompt

  John

• Vista SP1 does not update problems and System Restore returns a message "system restore was not entirely successful. File system and the setting of your computer has not changed"with the error code (0x80071AA7)

  0rignal title: Vista SP1 didn't update problem

  So, recently, I was on my computer of gf and noticed she had some updates, it could use his computer which included the SP1 update.  So I went through the process trying to update his computer and he has been a disaster and have had many problems and seems to have tried everything.  It has a Dell inspiron 1525 and has no CD and no key for its program of Vista.  I burned a Vista recovery disk and tried troubleshooting by using that, but have not had much luck.  When I use the Startup Repair tool there is no nothing.  So I tried to use the restore of the system with the Description of "install: Windows Vista Service Pack 1.  He had a restore point saved just before I tried to update to SP1.  Whenever I chose this method, it's but the whole process then in the end it says:

  "System restore was not entirely successful.  File system and the setting of your computer have not changed. "

  then he begins to list the details with the error code (0x80071AA7) and then gives me the option to close or 'Run System Restore"once again that is an endless loop, because I just end up with the same error each time.  If anyone has had this problem and bring myself through it.  I don't want to reinstall windows because it seems simply ridiculous and plus that she a lot of pictures on his computer and I want to get rid of those.

  If you need more information please let me know and evil provides everything I can

  Hello
   
  Follow the steps and check if the problem persists.
   
  Step 1:
   
  I suspect that your security program may be responsible for this. I would suggest you temporarily disable all security software and try the system restore.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note : Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  As for installing updates is concerned, I you should install them after you put your computer in aclean boot State. There could be a third-party software in conflict with updates. Clean boot helps eliminate these conflicts.
   
  Note: Restart your machine as usual by following step 7.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Your device or the computer could not be verified. Contact technical support for assistance.

  Your device or the computer could not be verified. Contact technical support for assistance.

  Go to Library/Preferences/SystemConfiguration/NetworkInterfaces.plist. Move the NetworkInterfaces.plist file to the trash. Restart your Mac.

  If that doesn't work then contact the Apple Support:

  Apple Store Customer Service at the the 1-800-676-2775 or see the online help for more information.

  Contact product support and tech: Contacting Apple for support and service - this includes

  numbers of international calls...

  Mac App Store: Apple - Support - Mac App Store.

  For iTunes: Apple - Support - iTunes.

• Why do I get an error "your device or computer could not be verified. Contact technical support for assistance. »

  I get this wile message trying to play an app, "your device or computer could not be verified. Contact technical support for assistance. »

  Your device or the computer could not be verified. Contact technical support for assistance.

  By the end of 2012 mini Mac, OS X El Capitan 10.11.2; Apple Watch, 38 mm silver AL, Watch OS 2.1; iPad 2 Air & iPhone 6 + iOS 9.2

• Windows Media Center Setup error: setup parameters for your region could not be determined.

  original title: MEDIA CENTER SETUP ERROR: Configuration settings for your region could not be determined

  windows vista operating

  Media Center worked then xbox 360 could no longer find videos.  I can not run the Setup program for media center because of this message:

  The configuration settings for your region could not be determined.  Restart your computer to solve.

  Things I've done:

  restarted computer several times

  run system restore

  disabled the norton 360 firewall settings

  has ran norton pc tune up

  still can't media center to work Please HELP

  Thank you

  Hello

  The problem may occur if the Windows Media Center components are not registered correctly.

  I suggest to try the following steps to solve the problem.

  The registry Windows Media Center components

  =========================

  1. click on start-> all programs-> Accessories, right-click command prompt and click Run as administrator.

  2 type the following commands, press ENTER after each line.

  REGSVR32 ATL. DLL

  CD C:\WINDOWS\EHOME

  EHSCHED /UNREGSERVER

  EHSCHED/SERVICE

  EHRECVR /UNREGSERVER

  EHRECVR/SERVICE

  EHREC. /UNREGSERVER EXE

  EHREC. EXE/REGSERVER

  EHMSAS. /UNREGSERVER EXE

  EHMSAS. EXE/REGSERVER

  We can open Windows Media Center now?

  It will be useful.

• How to fix the fsck "your drive could not be partitioned..." Bootcamp does not

  Hello, after days of searching for a solution and try several times to fix this, I write a question.

  I want to create a partition with Bootcamp to install Windows 7. Here's what I made in the following order:

  1. Tried to partition with bootcamp, but he was only let me pick 32 GB or 1024 GB (which I did not available).
  2. Manually create the partition with utility disk and at the start of my flash, found that USB 3.0 drive / Bluetooth drivers don't would not load then ran in question where I couldn't go beyond 'select language' screen on Win 7 install.
  3. Tried to restart and delete my partition but noticed that I couldn't so I had to boot in recovery of the Internet and the use of the terminal commands and gpt, deleted the unused partition and used disk utility to merge it into main drive. I followed these instructions: deleted my bootcamp partition, but can not resize my osx partition
  4. Re-directed training camp and received the error "your drive could not be partitioned."
  5. Disc repair/check etc. ran and found errors.
  6. Run fsck by this thread that your disk cannot be partitioned. Win7 Bootcamp and still got here.
  7. Thought that maybe filevault caused outcome so disabled that. 48 hours later my 2.3 TB have been deciphered.
  8. Ran bootcamp, same problem.
  9. Run fsck, same problem.
  10. Currently using TestDisk to analyse the sectors on disk 1, correct? :

  

  

  I'm ready to create another partition manual if I can get drivers USB/BT to work.

  
  

  Furthermore, anyone know why there is a limit of 32 GB/1024 on the size of my partition for bootcamp? Why can't choose anything between the two?

  Data sheet:

  

  Thanks in advance for any answer!

  Please after the release of

  Cs diskutil list

• 9.3 your iPad could not be activated because the activation server is temporarily unavailable.

  Downloaded the new software 9.3 on IPhone without a problem, for IPad 2, it says: your IPad could not be activated because the activation server is temporarily unavailable.

  Tells me to connect to ITunes to activate, when I do that, it says Apple does not recognize the device. This has happened for hours. Any clue whats going on?

  It is more likely to occur when a major update of iOS was recently released, because so many people seek to activate at the time, and sometimes the Apple servers get overloaded. Try again in a few moments, and maybe a reboot of the strength of your iPad.

  To force the reboot:

  Hold the home and power buttons at the same time until the Apple start-up logo appears.

• The Client computer could not connect to the remote computer

  Hello

  Relating to the name or a customer request. They have a few problems with the remote desktop connection in Windows XP.

  They haveWindows Home Edition and XP Professional on his laptop computer on his desk.

  They say:

  "I took the liberty to install Office remotely on computers, because it was not installed on the desktop.   I was able to connect to my laptop through my desk, but not vica versa. »

  "When I try to connect to my desktop from my laptop, I get an Error Message"the Client computer could not connect to the remote computer... »

  Hello

  You can read the following article and install the patch available to see if contributing to the issue.

  You receive an error message "the client could not establish a connection to the remote computer" when you try to establish a desktop remote connection to a Windows XP-based computer

  I suggest that you post your question in the TechNet forums if you encounter other issues related to the remote desktop connection.

  Windows XP IT Pro Forums.

• I just bought this new laptop, why I can't download free applications, I get "your purchase could not be executed. ???

  I just bought this new laptop, why I can't download free applications, I get "your purchase could not be executed.   ???

  Hi Jaynecampbell,

  Thanks for choosing Microsoft Community to post your question.

  According to the description above, it seems that you are unable to download apps, you get an error: "your purchase could not be executed. I understand the inconvenience that is brought to you, rest assured, we're here to help and guide you in the right direction.

  I would be grateful if you could answer the following questions:

  1 are you facing the question to download any specific application?

  2. using a proxy connection?

  We will check your time settings and proxy settings. Follow the steps below and we update on the State of the question.

   

  Method 1: Ensure that the date and time are correct on the computer.

  (a) check the Date/time setting by selecting the tile office and then left click on the time in the corner.

  (b) click on change date and time. And then check that the time zone is correct and the time of the internet tab has the ability to synchronize with the time server Internet.

   

  Method 2: Run the network troubleshooter utility.

  (a) open the network troubleshooter utility by sliding into the right edge of the screen, type search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking on search).

  (b) troubleshooting of network entry in the search box.

  Tapping c) or or by clicking settings and then type identify and repair network problems.

  Method 3: If you use a proxy connection, then try to disable the proxy and then try buying.

  Follow the steps to disable the proxy:

  a. open Internet Explorer

  b. click on Tools and then click Internet Options

  c. click on the connections tab and then click LAN settings

  d. disable the server to use a Proxy

  e. click on apply then Ok to save the changes.

  Method 4: Turn off the Windows Firewall and defender and then try to download the application.

  To disable Windows defender:

  a. place the upper right of the mouse and click on search and type Windows defender and press enter

  b. in the window, click the settings tab.

  c. disable the real-time protection real option.

  d. click on save changes.

  To disable the firewall:

  a. place the upper right of the mouse and click on search and type Windows Firewall and click on settings

  b. click on windows Firewall

  c. click Firewall round toggle the left pane

  d. check the option to disable the firewall.

  Note: Repeat the steps for the parameters of public and private networks.

  
  

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 5: Try to separate the Microsoft account to a local then check if you are able to make the purchase.

  Note: In the Windows store, you will need to click on connect and use the credentials online.
  a. hold down the Windows key + C to display the bar of charms, click on settings , then PC settings more.
  b. in the settings of your laptop, click users and under where it says connected to , click disconnect your Microsoft account and confirm.
  c. after the test, try to connect again by repeating steps and click on connect your Microsoft account to re-associate.

  If you have additional problems, please reply to this post and we will be happy to help you further.

• App Store works don't make mistake, "something happened and your purchase could not be completed."

  I have connected to Windows Live and my computer. While earlier I could download Apps from the AppStore Windows without problem, I do now face the most useless error message EVER:

  "Your purchase could not be executed.
  "Something happened and your purchase could not be completed.
  If anyone has any idea what that 'something' means, please let me know. I get very frustrated with most of these "apps".
  If an employee of Microsoft Windows is reading this, please be more informative and less redundant with your error messages.

  CDL42

  Try to clear the Cache of the Store

  Press Windows key + R

  Type: WSReset.exe

  Also can you try it and tell me what is happening

  • Press the Windows key + C (while on the shop page)
  • Click settings
  • Click App updates
  • Select synchronization licenses

  What happens when you click Synchronize licenses?

• Your license could not be validated. Hearing must stop now.

  I've been using the same suite CS6 for three years without too many problems, but a few days ago, I tried to use Photoshop but she closed seconds after starting. I also tried to run Audition but I received a prompt that says, "your license could not be validated. Hearing must now stop. "I use Windows 7 and I already reinstalled the entire suite. Everyone knows this? In addition, no one knows how to fix? Thank you.

  Have you tried the software Creative Cloud at some point?... This could be the source of the problem.

  How we stop to resume my perpetual license CS6 creative cloud?

  https://forums.Adobe.com/thread/1584746

• Your purchase could not be completed

  When I want to buy the head of State... what to do?

  Hi Alexander_dx316,

  I understand that you receive a message "your purchase could not be completed" on your Apple TV (the community you posted in).

  The first thing I would say is to log out of your iTunes Store account, then update your billing information.   This includes enter them your debit card or credit card number, expiration date and security code.  In addition, make sure that the name on the card and the billing address match the information on your bank statement.  Reconnect to your iTunes Store account when you're done.

  Modify or delete your Apple ID payment information

  If you have a balance on your iTunes Store account, and your current payment method does not work, you can try to use a different credit card or buy a gift card from a retailer iTunes local and which apply to your account to clear the balance.

  How are charged purchases on iTunes Store
  

  When you make a purchase, content credits are used first, as long as the value of the item you buy is less than or equal to the value of the credits. Gift cards are used then. If your gift card is less than the total cost of the purchase, the payment method that you have paid to the record is charged for the balance.

  If these steps do not resolve the problem with your account, please get in touch with the iTunes Store support team.

  Take care.