Satellite U500 - touchpad not answer me

Similar Questions

• Satellite U500 - may not wake from sleep

  Hi all

  I have a Satellite U500 laptop win7 64 bit and my system may not wake from sleep mode.
  "Standby mode" when I press the power button or any key of the keypad power led lights up but the screen stays black and the system is unusable.

  Any help?

  Have you noticed this problem in the first moments after upgrade to Win7?
  I assume that you made a mistake with Vista?

  Have you noticed the same behavior when you use hibernation mode?

• Satellite U500 - drivers not "signed": cannot install

  Toshiba is really the best laptop I've seen! I had to change my HD because of a hardware failure (dead disk); before that, I did a "recovery disc" Toshiba System. I thought I would just to boot from this DVD to reinstall them all. BIG MISTAKE!

  So I started BLAH this DVD, lights up process (an hour, already a great delay!), BUT a few drivers, especially one wireless, can not be installed! I get a message that "Drivers must be signed and therefore cannot be installed" and am kindly asked to get the "good drivers!

  On the Toshiba site there is no "good driver", I received those who are supposed to be for me, but still the same message Windows.

  So what to do? This "recovery disk" does not recover even the correct drivers? What a great joke! And of course the computer was sold without any DVD!

  OS: Win 7 64 bit 'home', with legal license.
  Toshiba Satellite U500 with Wifi and WiMax (4G)

  Thanks if you can help

  Dear guarding

  I put t really understand what may be the problem maybe you should visit Toshiba service, put your laptop on the Office nearest you and ask for help and logical explanation for all of your problems.

  You are not alone with U500. In front of me, I U500-1EX touchscreen and use it almost two years now. My notebooks running perfectly, created restore disk has been used 2 times without problem, WLAN works, and portable is up-to-date. Everything is OK and I love this little machine because I n t have one problem in the past.

  What model do you have exactly (U500-xxx)?

• Satellite L655 - Touchpad not responding

  My Toshiba Satellite L655 touchpad no longer works.

  When I open the properties of the mouse > device settings, there is no entries in the devices section.

  Pointers?

  Hello

  Maybe you need to update/reinstall the driver from the touchpad again if the suggestion posted by Akuma didn t help.

  Maybe there is something wrong with the software/driver for the touchpad, so it of certainly worth a try

• Satellite U500 touchpad does not work

  Hey guys, so after installation of a mouse on my computer wireless toshiba laptop, all seemed well. but all of a sudden after a few days, the touchpad didn't work properly and she also at times, the keyboard disfunctioned so.

  I went to Device Manager and found that there was a problem with the ALPS touchpad. Wen I try and update the driver, what it comes up with an error code «10» even after uninstalling the wireless mouse, the touchpad is still infunctionable.

  Ive read through a lot of forums but none has been a great help, I tried system restore my computer and opening to a date prior to installation but there was also a problem with the system restore because he could not because of the error 0xc0000022.

  my last attempt was to remove the ALPS touchpad driver and reinstall. I downloaded the driver from the internet and I tried to reinstall, but it came up with error code = 0 x 00000103---> a touchpad error.

  ATM im quite lost and in need of great help!

  This computer is also only 2 month old running on Windows 7.

  Hello

  Error code 10 means that this device cannot start properly because of the issue of the register
  Usually a update/new installation driver should fix it, but in many cases, this does not work because of corrupt registry
  I have no idea why the wireless mouse software touched the touchpad feature but it seems that the new OS installation can be useful

  But before beginning a new installation, try to clean the registry with CCleaner or another cleaning tool
  Maybe you are lucky and new installation is not necessary

• Satellite L630 - Touchpad not responding

  Hello

  I bought a TOSHIBA Satellite L630 two days ago. Today morning, the touchpad does more (no reaction from the cursor to the actions of finger).
  Properties: Synaptics TouchPad V7.2 on PS/2 port. Property window indicates that the touchpad is in order.

  I tried to reinstall the drivers (return to the previous version, then the new update). Well all my attempts have not.
  Any iddea? (maybe a hardware issue?)

  Thanks in advance and sorry for my English :)

  Hey Buddy,

  Maybe the internal touchpad is just off...
  Press the FN + F9 key combination to turn it on.

  It work?

• Z30-B-100 satellite - enabled touchpad not working not

  I just turned on the laptop and that was trying to set up connections wifi touchpad no longer works.

  I tried the Fn + F9 key, but nothing has changed. I turned the laptop off and then on again without any result.

  I can work to plug a usb mouse but the touchpad still does not work.

  You have a solution or should I take to be repaired?

  I bought it a week ago and I just had office and antivirus installed and worked very well so far.

  Thank you

  The touchpad works in the BIOS?

  If this isn't the case, it may be a hardware problem, or it is simply disabled in the BIOS.

• Satellite U500 will not start

  Hello

  I have a problem with my Toshiba U500 after I installed additional 2GBs of ram that the laptop does not start.
  He died immediately after, after I press the turn on button.

  The leds blink normally.
  I already tried to remove the new RAM and tested new and old memorys in different locations.

  I also tried to reset the bios by removing the cmos battery, but it seems that you cannot be disconnected.

  Any help would be appreciated.
  Sorry for my bad English and thanks in advance.

  Hi mate

  Notepad starts correctly using the old modules shipped with the laptop?

  In my opinion, you bought RAM that is not fully compatible with the laptop or BIOS.
  In this case, you should test the device with other modules of RAM of the manufacture of some users here in the forum reported problems with the essential modules I use Kingston modules and my notebook starts fine

• Satellite M40: Touchpad not working not properly

  I just had a problem where my dog jumped on my knee and operated something on the keyboard of my satellite M40.

  Now, whenever I try to press the button two times, I get the properties of the icon I'm hovering above. When I try to use the keyboard in Word, I get the menus to open instead of type appearing in the document.

  I can erase it with a restart, but I would like to know what happened.

  Fiona

  Hello

  It seems that the dog has changed the touchpad options ;)
  You should check the device touchpad settings in the mouse properties.
  What you can find in the control panel.
  Select the mouse and then go to the device settings tab. Then go to the synaptics touchpad settings.
  There you should find a few options you should check.

• Battery fully charged, but by Satellite U500 does not illuminate

  Hi all

  A year ago I bought a real replacement for my U500 battery. A few months ago the battery seems to go wrong (no charge), and as I was traveling I had no time to take it back to the dealer for yet another replacement. Last week, however, he started to work normally, all of a sudden - or so I thought.

  It turns out that the battery actually collected (he recharged from 0 to 95% in any one hour, and now the icon says "95%, no charging current"), but it won't feed the machine. If I pull the plug, the machine will die immediately.
  I tried to take the dough out and clean the contacts, but this doesn't seem to help.

  Any input on this is greatly appreciated. Thanks in advance.

  Shady

  I think that the battery is defective.
  You probably bought some sort of imitation product even if the part number would be the same.

  Many 3rd party online resellers provide China cheap batteries that are compatible (the dimensions of the battery are the same), but the performance isn't the best

  I think you need to replace the battery once more

• Satellite U500-1F5: eco and FN buttons do not work after BIOS update

  Hello world

  I hope I can find a solution for my problems here.

  I bought a new Toshiba Satellite U500 (PSU9ME),
  I'm updating my laptop regularly whenever I get alert through TEMPRO or Toshiba service center.

  Last week I received an alert to updat the BIOS and I did. Since then, I've noticed the following problems:

  1 eco utility does not work, and when I tried to uninstall, it says (not supported BIOS)
  2. on screen funtion buttons that appear at the top of the screen when you press the Fn key no longer not apear
  3. the touchpad lock / unlock button does not work, and even by pressing Fn + F9 doesnot lock

  I hope you can give me an answer about my problems,
  I already downloaded the latest updates for the eco and value-added packege of the toshiba site and install,

  BUT

  does not my prob

  still eco utility does not work. The msg (not supported BIOS), appear when I run the update.

  The bar of buttons on the top of the screen does not (even after I uninstall the package of value of toshiba and re - install the last being) and the locking/unlocking back touch button does not work.

  I hope Toshiba can find me a solution, coz I don't have time to go to the DEPOT
  PSU9ME00D00XAR model U500-1F5

  Windows 7 (64)

  Thanks in advance

  Hello

  First one comment:
  * I am updating my laptop regularly whenever I get alert through TEMPRO or Toshiba service center. *
  That s is nice, but certainly not necessary. When the system is working, do not touch or change anything. Maybe stupid sounds now, but I recommend you to remove the TEMPRO system. Believe me you don't need. I have 2 years old Satellite A300 and original BIOS. It works perfectly and I don't want to take any chances and to change what anyone. Since last month, I have the Satellite U500-1EX and will do the same. TEMPRO is already removed, and I am happy with the factory settings.

  All that you have done is OK, but at least you can try to reinstall entire OS now using HDD recovery option (F8 at startup) to see if everything works well again. Sorry, but if this will not help, I think that you need the BIOS downgrade to the old version.

• Satellite U500 - 11 C - power supply unit not detected

  Hello

  on my Satellite U500 - 11 C, the power supply is no longer recognizes (the rest green LED turns off when I plug)

  I tested my diet and it's OK

  I disassemble my laptop to check the connector and the power is OK of the external connector to the connector on the motherboard.

  with my battery, the computer works normally (but the battery is not more)

  You have an idea on how to solve this problem?
  What can I check?

  > Do you have an idea on how to fix this?
  If the battery and the mains adapter are ok, while a single problem can cause this: faulty motherboard.
  Maybe there is something wrong with the electronic power supply on the motherboard.

  Of course this is only my personal opinion, but I put t see any other reason for that

• Satellite U500 - 1 DR series Notebook is not detected by the TOSHIBA site

  Hey,.

  My Toshiba Satellite U500 - 1DR Series notebook (Serial No. 1A058758R) is not detected by the automatic detection of TOSHIBA online system. When trying to get portable detected manually on the site, I stopped fingd the model (Satellite U500-1 DR) is listed in the list of available templates or models. I'm unable to download software/updates on the site.

  Hello

  If the work of autoetection doesn t you can find manually but not not using the name model but the model reference number. Your DR U500-1 has part number PSU9ME-xxxxx then please check under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp Toshiba download page and look for Satellite U500 with reference number or model number short PSU9ME.

  Can find you it?

• A Satellite U500/018 Touch screen or not?

  I'm tkinking to buy a U500/018. Toshiba web site says "The Satellite U500 is a new approach with touch control"
  I saw one in a store and told me it's not not touch.
  Toshiba website says it's.
  So is he or she not touch screen. If so how is it activated?
  The one I saw in a touchscreen shopU500/018 did not work or was not enabled

  Hey,.

  I found the exact specs on Toshiba Australian page:
  http://www.MyToshiba.com.au/products/notebooks/satellite/U500/psu9ma-018013

  On the screen, I found the following information:
  + TruBrite® WXGA (1280 x 800) widescreen 13.3 +.

  It seems that he doesn t a touchscreen. Therefore, you should choose another U500 model.

• Satellite A350 - Touchpad does not work, but an external mouse works

  Satellite A350 Touchpad does not work ok (unstable system and left button not loaded).

  I tried to make the driver but nothing. No problem drivers (conf system). I have the driver for the touchpad stroped and with an external mouse everything is working properly.

  What should I do? Don't you think it's hard or soft the problem. * The touchpad is NEVER worked.*

  Thank you, and sorry for my bad English. :-(

  Hello!

  The touchpad does appear in Device Manager or you have here yellow exclamation points?

  Like Akuma says you can enable or disable the touchpad with FN + F9 key combination.
  Did you check that?

  In the worst cases, you must go to an ASP. It seems to be a hardware malfunction, and this must be checked by a technician of the laptop. Here, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye