Satellite U920 ultabook-Tablet does not start

Hello world.

Just bought the new laptop / Tablet 3 days ago.
Other than Windows 8 fustrating me death, computer is wonderful...
until today.
Does not start!

Turns on... but now those at home...
I tried with the battery, but also the decision-making power.
When I press the Start button...
2 / lights go on as usual.
Keyboard led lights as well.
A that's all what happends...

Finally, after a minute, the computer will beep 3 times slowly then close.
No screen at all... not even a light coming from the screen...
Quite annoyed that its only 3 days...

Any advise?
See you soon... Rob... Sydney

> Just bought the new laptop / Tablet 3 days ago.

The new book should work fine if it s not the case, then the hardware or software causing the problem.
I think that it s material so why you n t contact your laptop dealer and ask for the new laptop.
Replace this unit and test a new

Tags: Toshiba

Similar Questions

  • Satellite A300 - rotates but does not start

    Hello

    I have a Satellite A300. I had several probems for the boot since 2 months ago: when I want to turn on my laptop, it turns on but the screen keeps black and it does not load the screen "Toshiba Leading Innovation". 'Satellite' (to the left of the mouse) light is on (it would go only about a second then to start and then turn off) and it will turn off.

    I try again for so many times with all the possibilities: without battery, only with the power adapter, two, but it does not start. I don't know what I can do. I always Hibernate my laptop because I'm afraid of can not start it the next day.

    Could you help me? If she cares: I had to buy a new battery (not original from Toshiba) because I had to change the original. No more changes to my laptop.

    Thank you very much and sorry for my English written: S

    Diego

    Hey Buddy,

    > I had to buy a new battery (not original from Toshiba) because I had to change the original. No more changes to my laptop.
    Of course, it s always advisable using Toshiba original spare parts only, but if you notice the same problem with AC adapter only it s not related to the new battery.

    Just to make a better diagnosis: If you have connected an external monitor? The internal display is perhaps the problem and doesn't turn on and it would be useful if you are testing the situation and an external monitor.

    But this noise as a hardware problem serious and in this case, you can wait to contact an authorized service provider. Technicians professional diagnostic tools to make an accurate diagnosis and to Exchange defective equipment parts.

  • Satellite A300-15 a does not start after the installation of the alcohol program

    Hello...

    Satellite A300-15 has, I bought yesterday and after completing the installation of Vista, I tried to install "Alcohol" but my judgment of the laptop and now I'm not able to boot up the laptop.
    It does not start in any mode.

    I forgot to make recovery disks. I think that alcohol is not compatible with Vista. Error I get is below.

    Can someone tell me the solution?
    Please help urgent

    "A problem has been detected and Windows has shut down to prevent damage to your computer.
    If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: blah blah... "

    Looks like a problem familiar to me, as I had the same one with the Daemon tools. After installing these tools, I couldn't start my Windows XP. I guess that it somehow mixed upwards of some drivers or registry entries, but not sure about that.

    OK, you can try to uninstall tool first start Vista in safe mode (press F8 before Windows starts upward).
    You should then be able to enter in Vista without problem.

  • Satellite A200-24 b does not start

    I got my A200-24 b for almost 2 years now and the problem I have is driving me crazy.

    My laptop does not start at times. All the LEDs come, this Satellite down left indicator as well. But there is nothing on the screen.
    Doesnt matter what operating system I use, and I even tried to install the latest version of the BIOS. Nothing.
    I see the drive hard led flashing, and I can even hear the Vista startup sound.
    I have to turn it off manually by pressing the manual power button. Even this doest work sometimes. I remember the until routine start-stop 10 times.
    The problem is that Windows 7 will automatically repair mode. This never happened with vista.
    I even tried to change the memory chips live in vain.

    Will you please keep in mind what is happening randomly and I was not able to recognize a pattern.
    Any help will be appreciated.

    Its still under warranty.

    > Its still under warranty.
    Can you see Toshiba welcome screen or enter the BIOS settings?
    In my opinion you should not play with it. Put original Toshiba recovery DVD and install recovery image, if possible. Test it with the factory settings and if there is some problem of nearest service contact and let them repair your laptop.
    Satellite A200 is not latest model laptop, and I can imagine the warranty is valid for the next months only.

  • Satellite Pro L650/L650D does not start

    My laptop Toshiba does not work...

    When he was for a restart, the it closed suddenly... I want to start (start), but when I clicked on the Start button, it does not start... The LED lights were lit, but the laptop does not start...
    At the present time, the lights went out, I don't know how...

    It means that the laptop is break down?
    I hope not, because I don't want to spend more money with that... :(

    Is there someone who could solve this problem?

    Thank you very much, long in advance,
    Raquel

    It is not easy to solve these questions, because nobody knows what is the problem. It may be BIOS related issue or some other hardware related issue.
    It's that there are not a lot of options in this regard.

    You can try to remove the battery and unplug the power supply, press the power button / stop for a while and try again with power running. The same thing happens again?

    > The lights were on, but the laptop does not start...
    You hear cooling ventilation? When the laptop is turned ON it turns off a few seconds later or stays, but without any reaction simply?

  • Satellite A200 - support Button does not start when windows starts

    Hey,.

    Today, I decided to disable unnecessary programs as many as I could (to speed up my pc), so I went to Msconfig (I have vista home premium 32-bit) and a lot of things off. Including the "toshiba button support. The next time I restarted my additional buttons on the top of the keyboard all worked, next to one. Who normally turn on windows media player. This time, he did nothing at all. Game/resume, stop, forward, back and button internet all worked without problem.
    However, I really liked the WMP button, so I tried to find out what the problem was. I discovered that it was the support of the key, so I decided to reactivate it.

    However, this didn't not help: (.) I turned it in msconfig, but it does not start with windows more: (.) I know this is the program that I need, because when I run the program manually (this is the program: programfiles/toshiba/TBS/HSON.exe) the button works.
    I put a V in front of the msconfig program, but it does not work. Anyone has an idea why not?

    Edit: I found a solution, even if not the best. If anyone still has the same problem:
    I made a shortcut for the program to run (can be found in C:programfiles/toshiba/SCT and is called HSON.exe). Then I clicked start and said 'all programs', here I chose the "opstarten" folder, it comes to the Dutch version, but my guess is it's called something like 'start-up' in English. In this regard, I glued (copy / cut-> paste) the shortcut to the program, and now he begins again :)

    Hello!

    I agree with Akuma. You should try to reinstall the Toshiba value added Package. This determines media keys FN and all special functions on the laptop buttons.

    Search on the Toshiba site for an update:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Good bye

  • Satellite Pro L850-1DW does not start correctly

    Hello

    I have a client who has a L850-1DW / PSKDHE-00E005EN laptop.

    She keeps pointing out that the computer does not start successfully from the cold.
    She argues that the question arises mainly when the battery starts but sometimes when it is plugged into the mains.
    I can see where point of newspapers that BSOD were registered at the start and that, on more than one occasion, his computer was recovered from a restore of Windows. He has also recovered factory once too.

    Although I've seen the consequences of these issues of "start-up" I have yet to experience first hand with the device.

    I noticed yesterday that the BIOS is outdated (as I had an alert Tempro).
    I upgraded from 1.6 to 6.50. Yet once, I didn't have problems.
    I can't find the release notes for the BIOS so I don't know if this is a known problem that has been fixed.
    I don't know if this "intermittent" defect is just that or if the user has the power button down too hard or for too long and in fact inadvertently crashing NB itself.

    Any suggestion is welcome.

    Otherwise, I guess I have to connect a call with Toshiba.

    On this virtual path, it is not easy to say what the problem is here. In my opinion, you should ask your client if you can make the data backup and install original recovery image. To my laptop computer reviews must be tested with the settings without installation of additional software.

    > I don't know if this "intermittent" defect is just that or if the user has the power button down too hard or for too long and in fact inadvertently crashing NB itself.
    Who knows? Ask your client and show how to start the laptop by pressing the button walk / stop. It must be done slowly and for only one second.

  • Satellite L650-12 q does not start

    I have a PC laptop toshiba L650Q. Its working well for 1.5years now...
    Few days back, I closed the laptop, it's to tell closed the screen (generally it puts even in mode 'sleep').

    After about 10 minutes when I tried to open & start the computer laptop not simply start :(
    I can see the glow of LED battery & power adapter, but when I press the Start button, simply does not start...
    There is a momentary gleam of the power on button, I hear the fan trying to start & then it subsides in abt 2 seconds & laptop simply does not start...

    I tried the TROUBLESHOOTING steps below but without success

    (1) I removed the battery and tried to boot using the adapter, it forces of start up
    (2) I put the battery for like 1 hour & then tried, it forces of start up

    Please let know us the steps of troubleshooting or indications that that could be the problem and how I can solve it...

    Post edited by: dhiru23

    Try this:

    -Remove the battery and unplug the AC adapter.
    -Press the power button / stop along 30 sec
    -Connect the battery and AC adapter to the laptop
    -Try to turn on the unit.

    If this fails, check the memory modules.
    Remove a module and try to start Notepad using a single module. Run the test for each slot and the module.

  • Satellite L100 - cooling fan does not start up more

    Hello

    On my L100 laptop cooling fan doesn't seem to work! It does not start up more and after awhile the laptop shuts down as it is too hot. What can we do?

    See you soon
    Mark

    Hi Mark,

    The fan lights normally the POST process before loading the BIOS. Your laptop will continue to boot normally, I presume that your fan control electronics is still viable, otherwise the MESSAGE would fail. So, it seems likely that the problem is with the fan itself. I suggest you check that the fan will run in fact and it missed upward (try to blow strongly in grids).

    If you laptop is still under warranty, then you must contact an ASP to get the fan replaced.

    Kind regards

  • Satellite Pro L300-21F does not start and the screen remains blank

    L300-21F is aged 18 months, so out of warranty. When you press the power button, you can hear the fan and a "click" but the hard drive does not start and the screen remains blank. The power and the battery on the headlight LEDs, but the switch light does not work. I checked the power supply and it is 19.3V and substituted a good known. Removed the battery, tried with just the power cord and still nothing. Pressing ESC or F2 when you press the button power does not bring to the top of the screen of the bios or any other message. I have concluded there is no power the jury. A friend he had its technology take a look and he concluded Council is probably a friend.

    So my questions are:
    1. He's probably right?
    2. is it a common problem with an easy solution?
    3. what else can do before shelling out for a new Board of Directors?
    4. is there a link where I can find how to disassemble the case?

    Any help appreciated

    Hello

    > 1. He's probably right?

    Yes, it looks like motherboard failure

    > 2. Is this a common problem with an easy solution?

    If it's a motherboard problem, the whole motherboard is replaced. Quite expensive part...

    > 3. What else can do before shelling out for a new Board of Directors?

    I don't think you can do anything with fried mobo

    > 4. Is there a link where I can find how to disassemble the case?

    Take a look at the site called irisvista.com

  • Satellite U200-179 often does not start after the installation of Ubuntu Live CD

    I'm installing Ubuntu edgy on my new computer toshiba laptop U200-179.
    I install linux without problems from the live CD, but when I try to restart the pc, often it does not start.

    During booting linux runs the utility to check the file system, although it seems that everything is ok and the boot stops.

    I also tried a different distribution (Knoppix 5.01), but with this one, the installation process stops at the beginning.

    What could be the problem?
    Luca

    You have upgraded to the latest version of the BIOS available (3.30)? The previous (2.40) had problems with some Linux distributions...

  • Satellite Pro A200 PSAE4E does not start after upgrading BIOS XP

    Hi, I need help!

    computer laptop, tested just got everything ok with Vista business and everything works fine.
    Now, I have a requirement to test a laptop duel boot XP build and follow the attached instructions to change the BIOS so that I can install XP.

    Restarted the laptop with the bios disk selected bios XP and everything seems ok.
    The phone rings, I answer. When I finished, I think back to the laptop and screen is white.
    Leave it for 20 minutes still white. Stop the laptop and reboot, no tosh start screen, nothing.

    Now does not start, so what do I do to get this thing working again?

    Hey Buddy...

    This looks very bad! :(il ressemble pas à quelque chose a mal tourné àle cours de la procédure de mise à jour dele de BIOS, et donc l'ordinateur portable ne peut pas démarrer correctement.)

    I hope that the ROM module must be flashed again.

    This can be done only by an authorized service provider.
    I see no other solution for contact ASP in your country and ask for help and handling.

    Good luck and best regards

  • Satellite L505 - 13 X - does not start on first use

    my laptop does not start the first time I turn and I put it several times it starts

    Hi oussama512,

    Can you explain this once again with the other words and more detailed?
    What exactly put you it starts?

    In the worst cases, this problem is hardware related and you need help from an ASP.

  • Satellite Pro 6100 system does not start

    Hi people,
    I have the following problem. I used my laptop long enough for thet to deplete battery and the device to go into hibernation. Given the againm battery costs, I tried the system and now it does not start.
    The leds light up fine and stay lit upwards. Just nothing happens, the FN key works. After a minute the fan will start to turn upwards and turns down again. But nothing else.
    After some time, by pressing the power button for a few seconds seems to start the machine, but it stops immediately after 30 seconds. Even if doing a memtest.

    anyboy has any idea what could cause this. I tried to remove the hard disk and start it does not affect what anyone, as does move the RAM module in the other slot. Also remove the CD/RW drive does not affect it. Remove the battery and start also give the same result.

    Hello

    Sorry, but tells you don't know is not enough for me.
    If you start Notepad, you see something on the screen?
    A Toshiba start screen appear?

    You suggested that the FN key works. Have you checked it in windows?
    AFAIK the FN keys can work only if the operating system has been launched and the drivers have been loaded. So my strange question.

    The whole thing is very strange. If nothing is displayed and the laptop cannot start, so I guess a hardware malfunction. But you know without any trial it s not easy to say what's wrong.

    Try to disconnect the laptop from the sector and remove the battery. Wait several times (30 min - 1 hour) then plug the AC adapter and try to start it.
    If it won't work and you know that other devices are ok such as RAM or HARD drive so I think that the technician must check the machine.

  • Satellite M50D-A-10W does not start after the battery is completely empty

    I have a laptop Toshiba Satellite laptop Satellite M50d-A-10W AMD A, 15.6.

    I have problem when the battery is completely empty I have to use the needle achieve hard reset the switch behind the laptop... so I can't enter in bootmode with f2

    How can I solve the problem?

    Thank you

    I guess you are talking about the shutdown procedure force as described in this document:
    http://APS2.toshiba-tro.de/KB0/TSB3C03JR0000R01.htm

    This problem can appear in case the PC freezes, do not start or has a power failure.

    I think that the laptop turns off in case the battery is completely empty. In this case the system does not close properly.
    As the default state, the system keeps laptop but usually the unit carries out a stop of the hybrid. This procedure allows the laptop to start much more quickly, but it could affect the system startup in case something goes wrong during the process of closing.
    You can disable this hybrid mode and in my opinion, it is also recommended.

    Details:
    http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

    However, to avoid these problems, it of very important to correctly perform the closing procedure.

Maybe you are looking for

  • Safari 9.1.3 textedit html/css not displaying does not correctly

    I am trying to learn html/css and I'm going through a basis of teaching course that you type some html and css style, and then open it in Safari. I went to textedit preferences and selected plain text, I unchecked .txt extension and saved as index.ht

  • Running the OS10.6.8 version and cannot access to app store

    Hi, I recently bought a new battery for my old macbook pro 17 inch laptop. I updated the OS to the latest version of snow leopard 10.6.8. When I turn on my computer; It shows that I am connected to my airport extreme and also indicates that it is in

  • Iomega home media cloud edition & usb storage

    Hi, I am running low on space on my Iomega nas media so server thought I would use the USB port to add extra storage space. The new drive appears ok and appears as a share, but I can't seem to get my dlna client to see any media on the drive - I have

  • Satellite A60-102: error with an autodesk autocad 2006

    Hi all;Autodesk autocad 2006, I installed on my computer laptop satellite SA60-102, but it did not run and it displays an error saying 'DBX CASE 0' with 'ok', although I installed it on my desktop pc and it worked very well. I need your help ASAPNaim

  • Line chart of several series with staggered data points

    HelloApp of Hillary graphic sample includes an examples of charts and how to handle null values.https://Apex.Oracle.com/pls/Apex/f?p=36648:55I came across a scenario which goes a step further. If you have a series with a set of data points and anothe