Satellite U920T - 100 PSUL1E - WIDI does not work after upgrade from 8.1 to win

Similar Questions

• Satellite U940 - 4000 Graphics Intel does not work after upgrade from 8.1 to win

  I've updated my Satelite U940 11 X 8.1 Windows (from 8.0) and now my Intel Graphics 4000 does not work.
  The Device Manager shows Code 43: windows has stopped this device because it has reported problems.
  I try to download a new driver from Toshiba, but this is not possible. Whenever the download stops.

  Probably for a lot of traffic on the connection

  Were you finally able to download the driver?
  I could download the package without worrying about performance too

• Microphone does not work after upgrade from Vista Home Premium to Win 7 Home Basic-Sony Vaio VGN-NS25G

  Microphone does not work after upgrade from Vista Home Premium to win 7 Home Basic Edition. Laptop model Sony Vaio VGN-NS25G, bought in India

  My built-in mic not working anymore after the upgrade from Vista Home Premium to win 7 Home Basic Edition. Model laptop Sony Vaio VGN-NS25G was bought in India. I have taken the loacl Sony Service Center and they said that Windows 7 drivers for the microphone Sony was not yet available. They mentioned that the only way to fix the problem was to upgrade to Vista. Is this true? Where can I get these drivers for the microphone, and they are not available, when will they be available?

  Hello

  Method 1.
  Interestingly, I found the drivers for Windows 7 for this particular model of Vaio. Here is link thye:
  http://www.Sony-Asia.com/support/download/362654/product/VGN-ns25g/sectionfirst?subpage=detail

  I suggest updating all your drivers from the link above and drivers Realtek especially.

  Method 2. Set the default Microphone.

  Once the drivers installed to check if the microphone is the default value, here's how:

  Exercise the functions mentioned below to adjust the Microphone as default:
  1. Click Start and click on Control Panel.
  2. click on sound, then a new window will open.
  3. in the new windows, click on the 'Registration' tab and right click in the window and click Show disabled devices.
  4. now check if the Microphone is listed there and right-click on it and choose activate.
  5. turn highlighted that Microphone and click "set as default".
   
  For more information see the articles below:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows7/recording-audio-in-sound-recorder-frequently-asked-questions

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Projector does not work after upgrade from Sierra

  My projector does not work after upgrade to Sierra. Or search in Outlook (I use outlook for Mac due to having MS 365 for labour) or the search function in the finder. I use this all the time and need this feature back. I tried to reindex spotlight and nothing. Anyone has any ideas.

  Try to rebuild Spotlight rebuild the Spotlight to your Mac - Apple Support index

• Satellite P200 - 10 c: camera does not work after upgrade to Vista ultimate

  After the full vista upgrade webcam did not work. After some research, I found that I had to change the driver for usb video camera I did.

  Everything works fine now except the snap button of the camera software. Record audio and video works fine. Snapshot button does not work after you have clicked on it. Can someone help me solve this problem too.

  Hello

  you have reinstalled the software of the camera (not only the drivers) that controls the special features snapshot-thing like that?

  It should contribute to reinstall everything because vista is confusing every driver/software maximally... :)
  Would appreciate comments on your success.

  See you soon

• Satellite P850-30W - the fan does not work after returning from the mode "Eve"

  I have a Toshiba Satellite P850 30W with bios 1.90.

  Sometimes the fan does not work at all after back mode standby on windows 7.
  What happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  Normally the fan starts to run when the CPU gets more than 50 degrees celsius and stops less than 50 celisus...

  I tried running Prime95 when this fan-this occurs and the time of the computer got dangerously high (near 100 degrees)! the fan did not start at all
  .. .This error could damage the laptop potentinally...
  to get the fan turns once again I have to restart windows

  anyone experienced this?
  I guess that the fix would be to never use standby... or toshiba needs to fix it with an update of the bios.

  > Sometimes the fan does not work at all after back mode standby on windows 7.
  > What has happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  You said it's happened twice and only sometimes done this means that above all the fans are working well?
  In this case, this would mean that it of difficult to reproduce this problem, but you might be right: maybe a BIOS update would help solve this problem permanently

  I found some discussions on the stand-by mode and fan activity and in most cases, the update of the BIOS was the key.

• Satellite Pro 6000; sleep function does not work after upgrade W98 SE to XP

  I bought a windows XP cd and installed on W98 on my Satellite Pro 6000. The sleep function does not work now. I probably need a software of Toshiba. What do I need? Where can I find? What is the order of installation?

  Hello

  All drivers Windows XP Home edition, tools and utilities you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. You have old laptop model and because of this type of product, you choose option ARCHIVE.

  Order of the facilities is as follows:
  -Windows XP
  -Display driver
  -Audio driver
  Toshiba - common modules
  -SD Card host driver
  -SD Card Driver
  -BlueTooth Stack
  BlueTooth - Easy Connect
  -Mouse driver
  -Modem driver
  -LAN driver included with Windows XP
  -Infrared driver
  -Toshiba Power Saver
  Utilities - Toshiba
  Toshiba - post Mobile
  -Toshiba Console worm.
  -Toshiba Hotkey for display devices

  I hope that you will be able to install Windows XP Home edition successfully.

  Good luck!

• Satellite L855-149 - Synaptics touchpad does not work after upgrade to win 8

  I Hare recently upgradedmy Toshiba Satellite L855-149 to the most recent version of windows 8 6.2 and since I did then the Synaptics touch pad stopped working, I guess because the driver does not work with this version of windows 8. What can I do to fix this so I can use my computer without a plug in the mouse again?

  Thank you
  Simon

  Thanks for your comments!

• Satellite L350 - built in microphone does not work after upgrade Win8

  Hi people,

  I have this problem since I went from Vista to windows 8. my sound card seems to work ok. My webcam works also. I made sure I chose the right microphone on the Panel etc. so theoretically there is no reason why it shouldn't work... but it is not working.

  im guessing it has to do with my laptop being old enough, so no compatible drivers? I have a Satellite L350.

  What should I do?
  falone buy headphones?

  best!
  Al

  I understand that you want to use newer OS on this old piece of hardware, but it can be problematic to use it if certain model of laptop is not fully compatible.

  I think you're the first person who reported thereon. Unfortunately, I can't help you with this but if possible ask a friend if you can get outputs audio headphones and test mic ports.
  It will be interesting to know if you will be able to use the headset.

  Please post comments.

• Satellite A200 - 170 PSAE6: the sound does not work after upgrade from Vista to XP

  Hello

  I have a little problem with my laptop Toshiba A200-170
  Modelnummer: PSAE6

  I changed my system from Windows Vista to Windows XP.

  Everything but the sound at all to install worked at best does not. The driver runs up to the end, but after the restart is installed nothing.

  Please help me!

  One question;
  Have you read the Readme.txt file that is placed in the audio driver package which can be downloaded from the Toshiba page?

  Please do!

  If you install the driver of sound for the first time follow these steps:
  Driver installation during the first:
  ---------------------------------------

  Step 1. Before installing Realtek HD Audio Drivers, press on the
  [Cancel] button if Windows detect the multimedia Audio device.

  Step 2. Insert the "Drivers from Realtek HD Audio" CD into the CD-ROM drive
  drive and run the setup.exe program to complete the installation.

  Step 3. Click on [next/OK/OK] to proceed. If the context menu of Windows
  "Digital signature not found" message, press [Yes] to continue the
  installation.

  Step 4. Finally, select to restart the system and press [finish] to complete
  installation.

  The system will reload the drivers and make some adjustments in the INF file
  file if necessary.

  Important: Please install the Microsoft KB888111 patch before installing the audio driver

• HP Pavilion 2000 - 2120TU Bluetooth does not work after upgrade from Win7x32 to Win8.1x64

  Hello

  I used my laptop HP Pavilion 2000-2120TU since Apr. 13.
  Initially it was without any OS, so installed Win7x32 Pro.

  After that, I downloaded and installed the drivers from the HP site and all features were OK, including Bluetooth.

  Now I have upgraded to Win8.1x64, once again, downloaded all the drivers from the HP website and install them, but the Bluetooth is not working properly.

  I downloaded

  Qualcomm-Atheros Bluetooth 4.0 + HS Driver for Microsoft Windows 8

  Try this one and if it does not, unfortunately, I won't be able to any more help this issue because I have no idea what the problem is.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_127984_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• System Restore is missing from the start menu and does not work after upgrade from win98se to winXP Pro.

  I just upgraded to winXP Pro win98se. After doing so I discovered there are no ads for tabs "System Restore, disk cleanup, Disk defrag, scheduled tasks or System Info ' not listed in the"System Tools"menu, but the others are. I also noticed he wasn't an App icon. "Security system" in the control panel. I installed SP2 to try for a fix, but later he installed only the "security system" App.  I find 'rstrui.exe' in the C:\WINDOWS\SYSTEM32\Restore folder, but when I click it, nothing happens.
  I'm working on a laptop Dell Latitude cpi with a Pentium II 363 and 128 MB of Ram.

  The reason for all the downtime is you have 2 OS installed (partially), & windows

  XP is you expected in the Committee to xp & remove the possibility of return to 98... its been a long time

  but, open Disk Cleanup utility, remove the previous operating system (select all), once through, open the disc

  cleaning, locate the 'other options' button, select this option to remove all but the last restore point, close. Go

  to run, type: appwiz.cpl locate the large fo; der with the old operating system, remove it, close when thru.

  Run Disk Cleanup.

• Pavilion dv5020ca sound does not work after upgrade from xp to vista Home premium

  HP Pavilion Dv5020ca windows vista Home premium

  After the transition from xp to vista will not install the drivers for my sound card and the error message I got was

  cannot find media any help would be apperciated

  Hello:

  See if the works of audio driver XP installation...

  Download and run this driver.  If it automatically installs audio, very well.  If it's not... close any Windows error.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-42513-1&cc=us&DLC=en&LC=en&OS=228&product=3223544&sw_lang=

  Go to Device Manager and click on the multimedia audio controller needing drivers.

  Click the driver tab.  Click on set to update driver.  Select Browse my computer for driver and at the bottom of this window software option, select Let me pick from a list of drivers for devices on my computer.

  Select disc and go to: C:\SWSetup\sp33443\CPL30A5a and select the Conexant High Definition Audio from the list and see if the driver will install.

  Then restart.

• First Elements 10 does not work after upgrade from 8.1 to 10 Windows

  I haven't had any work in first 10 items from my computer updated from Windows 8.1 for Windows 10. Yesterday, I discovered that the videos I had edited and made first pay more. Videos 'Mpeg' now appear as "mi/gal." The original clips again will play, but not the edited videos.

  Is there a solution?

  I have to go back to Windows 8.1?

  If I go to the first 14 elements, these videos will be playable?

  First of all make sure that you uninstall and reinstall Premiere Elements after that you upgrade your operating system. Version 10 is a 32-bit program and will not be able to take advantage of the advanced architecture of Windows 10.

  Also to ensure that you have the latest version of Quicktim installed, according to the requirements of the program.

  If you have trouble running first Elements 10, the value that it is running in Compatibility Mode. It should work just fine - just not as well as new 64 bit versions of the program.

• Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate

  My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.

  Help please

  Hi asalamk,

  The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools

  You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.