Similar Questions

• Satellite U920T touch screen does not work with Windows 10

  Hello everyone
  I've updated to win 10 on my laptop & since I've lost the ability to touch my screen, it now works like a normal monitor.
  I searched for several weeks on the net for a solution, but I realized that Toshiba does not care to solve the problem so any who found a solution? It seems to be a driver or software related issue to win 8.1 & 10.

  Hello.

  Even as Dr. Joe... I also upgraded Windows 10 lost touch screen and camera. I returned to Windows 8.1 and I still haven't get touch screen. I seem to have lost my drivers HID Touch Screen as well.

  Anyone have any ideas on how to restore touch screen drivers? I can't find them in the download section of driver Toshiba after hours of research.

• Satellite U920T - touch screen does not

  The touch screen on my U920T satellite does not work from a few days back.
  I can't find all the settings for touch or any (except the touchpad) touchscreen device in Device Manager.

  I'm not sure exaclty when he started to malfunction.
  I installed the 8.1 Windows a few months ago and had a problem with the card wireless at the beginning, but the problem with the touch screen just appeard this week.

  What driver Toshiba control the touch screen?
  Is it a hardware problem or software?

  Hello

  To be honest there is no special driver to control the touch screen.
  The driver is provided by the Windows System.

  I think you should get the laptop back to factory settings but I fear that this will not solve the problem of Mr. smells like a hardware problem because I found some threads here in this forum about the dysfunction of the touch screen and especially the problem could be solved by service agents.

  By the way: before you run the recovery process try to configure the stylus and touch screen.
  Go to the control panel (Windows key + X-> Control Panel)-> Tablet PC setting.
  The first display tab contains options such as configure screen stylus and touchscreen.
  Here, you should be able to start the installation program and identify the touchscreen.
  The first option must contain 1 internal LCD
  At the bottom, you might find button to calibrate and reset the settings for the internal LCD.

• My touch screen does not work.

  My touch screen does not work. Sometimes, and other times I have to reboot. I restored my phone, but it still has the same problem. Any suggestions?

  The following information is taken from the HT201406 of the Apple KB article:

  If the screen of your iPhone, iPad or iPod touch does not respond to touch

  If your touch screen responds slowly, inconsistently, or not responding at all, follow these steps.

  Check your touch screen

  Make sure your hands are clean and dry, then try the following steps:

  1. If you have a case or a protective screen on your device, try removing it.
  2. Clean the screen with a soft, slightly damp, lint cloth.
  3. Unplug your unit.
  4. Restart your device. If you are unable to restart it, you can force restart your device.

  If your touch screen is still unresponsive as it should, contact the Support technique Apple or make your tablet in an Apple Store or Apple authorized service provider.

  Adjust your settings for tactile 3D

  If you have an iPhone 6s or later that does not properly respond to tactile 3D press, you can adjust the settings:

  1. Go to settings > general.
  2. Click Accessibility > Touch 3D.
  3. Then set the sensitivity of the setting.

  Get more help

  • Find out what to do if your screen does not turn.
  • If your screen is cracked or broken, implemented the repair service for your iPhone or iPad.

• Qosmio DX730 and Win8 - touch screen does not work

  Hello

  My wife's parents bought a Toshiba Qosmio DX730 (model PQQ11A). They have recently upgraded to Windows 8 and the touch screen does not work now.

  The problem is lack of drivers (the monitor driver reports as a generic PnP monitor).

  I have went on the Toshiba site and selected downloads driver for the appropriate model and installed a number of drivers, including recommended NVidia display drivers. There is no drivers on the site that seem to install support for Toshiba touchscreen.

  Are there no drivers available for this model Windows 8? If not, is there another solution? If Yes, where can I find them. Any help very appreciated because they have nice and bought computer Windows 8 so they could use the touch functions.

  Thank you.

  Hello

  On the page of the Toshiba UE driver you can find drivers for Win 8.
  As far as I know that you will install the Toshiba display driver for the touch function works correctly.

  I found this driver.
  Please check if you can install this:
  [Win 8 TouchScreen software for Qosmio DX730 | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 381 & selSeries = 366 & selProduct = 7338 & salt ShortMod = null & language = 13 & selOS = 40 & selType = all & rupload = Yes & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 83418 & O SID =-1 & driverLanguage = 42]

• ASUS laptop computer: touch screen does not work after update of windows 10

  My touch screen does not work after update of windows 10 in Chrome. How can I fix it?

  Hello

  Welcome to the HP support forum. Asus and Chrome are not HP, touch screen works on my machine HP with IE, Firefox and the new browser Windows 10 called Edge. I think that you need to update to Chrome.

  Kind regards.

• Still 2 WT10 - touch screen does not work

  Sometimes the touch screen does not work or malfunctioning, as does replacing the system and continues. When it crashes I have to suspend the Tablet and wait a bit, sometimes I have to play several times to select what I want. Anyone know what it could be?

  Have a Toshiba Encore 2 WT10

  You said; you have already changed the system.
  What did you change? The ENCORE 2 WT10-A-102 was pre-installed with Win OS 8.1.

  Also, I guess the problem described is related to busy BONE.
  Probably too many applications (apps) as well as the process running in the background and this could lead to short a few drop-outs or performance problems.

• Model is SVF15215SNB Touch screen does not work - no. Pen or touch input is available

  My computer model is SVF15215SNB Touch screen does not work and it says no. Pen or touch input is available for this view kindly let me know the solution to address the issue

  Hello!

  It seems that the model number you provided is not a model for us.

  This Forum is for help and support for the products of Sony us.

  For assistance, please contact Sony support team in your area for the best support!

  Thank you!

  Sorry for the inconvenience!

  http://www.Sony-Asia.com/countryselector.html?HPID=countryselector:AsiaPacific

• Touch screen does not work after Windows 8.1 upgading

  I upgraded my HP TouchSmart tm2 notebook Windows 8 tot Windows 8.1. Now my touch screen does not work, when I touch an app. Also my touchpad do not work. There is no problem when I we an external monitor (without touch screen). I received a message that Assistant HP app is not compatible with Windows 8.1. How to solve this problem?

  Unfortunately, there is no support for the applications of the touchscreen or devices to your laptop under Windows 8 or 8.1

  operating systems.

  This is the touchpad for Windows 7 software

  You can try to install mode of compatibility in this solution provided by Member AttackofZaq

• (Redirected) 10 Windows touch screen does not work

  I've recently updated to windows 10 and my touch screen does not work. I believe that the driver is no longer installed. Any help would be great.

  Best of this post in the forum Windows 10 here:

  http://en.community.Dell.com/support-forums/software-OS/f/4997

  Bev.

• Inspiron one 2320 touch screen does not work

  I have all in one, my touch screen does not work. I have Windows 7 How do I work?

  http://en.community.Dell.com/support-forums/desktop/f/3514/t/19456063

  or by post to this community to get help.

• Acer ft200hql touch screen does not work w / HP Pavilion dv7-5000, Win 7 Pro 64-bit

  After searching for and buying touch screen FT200HQL, it does work with my HP Pavilion laptop dv7-5000, Windows 7, 64-bit.  I have the USB cable is connected (even if it says that it is optional in user's Guide - not an option if you want the touchscreen to work).  I tried it with an Acer, Gateway and an another HP Pavilion laptop (all Win 7), & it works perfectly with them, but not w / mine.  All my drivers are up to date.  (Although there is not driver site Acer for the FT200HQL for Win 7 & I don't think that what they have listed as a driver for Win 8 is a pilot).  A Microsoft Search to ensure the compatibility of the FT200HQL compatible shows and there's nothing I should do.  Help, please!  I really like the monitor & don't want to send again, but I bought it mainly for the touch screen feature.

  Hello Jo,.

  Thanks for posting your question on the Microsoft Community.

  I would like to know some information about the problem so that we can help you better.

  What version of Windows 7 is installed on your computer?

  To check the version of Windows 7 is installed on your computer, please use this link:

  Operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows/which-operating-system

  You can then check the hardware compatibility of the touchscreen with your laptop device.

  See this link:

  http://www.Microsoft.com/en-us/Windows/compatibility/CompatCenter/home

  I suggest you to update the graphics card, and chipset drivers from the manufacturer's Web site.

  Use this link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5051950

  I also suggest you to install the Vista driver in compatibility mode.

  Remove and reinstall this device in the Device Manager. To do this, use the following steps:

  a. right-click on the executable/program of the driver installation file, and then select the Compatibility tab.

  b. click the checkbox before you run this program in compatibility mode for option, and then select Windows Vista from the drop-down list. then try to install the device driver.

  Additional information:

  A touch screen does not work properly after that you resume a computer from sleep mode Windows 7

  http://support.Microsoft.com/kb/2405640

  Windows Touch

  http://Windows.Microsoft.com/en-us/Windows7/products/features/touch

  I hope this information helps.

  Please let us know if you need additional assistance. We will be happy to help you further.

  Thank you

• volume and the touch screen does not work

  good so we got our a Vulcan mod VTA1005XBM32. Will be that she locked her self so we had reset his tab/pc, but know its volume and the touch screen does not work. see some convo saying to download something, but I don't really know what to look for. Help, please... Thank you Dorothy

  OT:

  my / Tablet PC

  Dorothy salvation,

  Thanks for posting your query in Microsoft Community.

  I don't understand that the volume and the touch screen does not work and I'll be happy to answer your query. These features require the updated drivers for them work. Let me ask you;

  • When was the last time that the two have worked?
  • Remember to no particular change in the device before the show?
  • Since the touch screen does not work, you are able to use the options settings?

  The device requires the updated drivers for the volume and the touch screen. I suggest to follow the methods below and check.

  Method 1: Run the troubleshooter of material and check if that helps.

  a. type in the right edge of the screen, and then click Search.
  (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click find.)

  b. enter Troubleshooting in the search box, type or click Troubleshooting, and then press or click on hardware and sound.

  c. press or click on hardware and devicesand follow the instructions on the screen. You may be prompted for an administrator password or to confirm your choice.

  Method 2: Update the drivers

  Step 1: Update the driver through Device Manager

  a. press the Windows key + X , and then click Device Manager

  b. expand driver Sound

  c. make a right click driver, and then click Update driver software

  Step 2: Install the Windows updates pending

  To check the updates:

  1. Open Windows Update by hitting on any fly in the right edge of the screen (or, if you are using a mouse, pointing to the corner bottom right of the screen, move the mouse upward), tapping or clicking on settings, tapping or clicking change PC settingsand then by typing or clicking on update and recovery.

  2. Press or click check nowand then wait while Windows searches the latest updates for your PC.

  3. If updates are found, tap or click install updates.

     Read and accept the terms of the license and then press or click Finish if the update requires it.

  4. Restart the computer for the updates to be applied.

  Step 3: Visit the website of the manufacturer of the device support and install the latest drivers for the sound and touch to Windows 8 for the same model of aircraft.

  You can also check: touch and pen settings: FAQ

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• my touch screen does not work after you download windows 8.je have a B305 lenovo all in one PC ideas?

  my touch screen does not work after you download windows 8.je have a B305 lenovo all in one PC ideas?

  I downloaded the former driver of windows 7 touchscreen and it worked

• Satellite A60-122: screen does not work - rest black

  Hello!!

  Can someone help me please on a screen problem? I have a Toshiba Satellite A60-122 and when I turn it on the screen does not work. It remains black as if the power of the laptop was turned off. I tried to connect the laptop to an external monitor, but it still does not work. I have no more ideas of what can do to make it work.

  I already told to format the pc with the cd of restoration but without an image, it is impossible to do anything...
  Thank you

  Isabel

  Hello Isabel

  I'm not an expert, but if there is no image on LCD internal display and the external monitor, I assume that there is a problem with the graphics card. I think you should contact the customer Service of your country partner and let check the device.

  I also hope that the warranty is still valid and if something needs to be replaced they will do it for free.

  Bye and let us know if you have more information about it.