Satellite U940-108 - how to configure the BIOS to boot double OS to SSD / HDD

How can I set the BIOS to start multi os ssd and HDD?

I want to boot from an OS SSD and other bones of the HARD drive,
When I try to do, I've got windows error?

Can you help me

Hello

I guess you want to install the operating system (which one?) on the internal mSATA SSD 32GB?
This mSATA SSD is used for caching (hybrid boot) to start Windows faster 8.

I recommend you to install the second operating system on the HARD drive.
To do this you must create the new partition that could be used for the installation of the OS.

Then boot from the Windows installation disc and install the OS 2nd on the new partition.

Tags: Toshiba

Similar Questions

  • How to configure the BIOS to boot USB on Satellite A50-110?

    Hello.
    I own a Toshiba Satellite A50-110 and I have a USB bootable Flash drive, but I don't know how to boot from the USB key.
    I guess I need to access and configure the BIOS. How can I do? Where can I get information on this subject? What are the steps to perform this task?

    TIA

    Hello

    As far as I know in the BIOS cannot be configured anything. As much as I now on this old notebook you can use just USB floppy for boot drive (U key at startup), but not the USB flash drive.

    Enter BIOS settings with the ESC key at first upward and check that all listed bootable devices.

  • Satellite L50T-A196 - how to access the BIOS

    Hello

    I just bought a new laptop Toshiba Satellite L50T-A196 and it worked very well and the great until recently.

    I tried to reformat my computer because it got crashed.
    I was able to reformat my computer very well in previous years.
    So far, I've reformatted my laptop more than 5 times, but that it was like 1 year ago and now I really don't know how I got into the BIOS menu.

    I tried pressing F1 to F12, holding them and also repeatedly pressing it.
    Also tried pressing F2 and F12 or ESC + F12 F2 before even looking at computer and then turn it also I tried pressing 0 too and also ESC and the ~ button.

    Nothing seems to work.
    So my question is how to enter the bios?
    I used to be able to get, but now I don't know what happened

    Help, please!

    Hello

    _Firstly! _
    You need to perform a full stop down.
    Here's a HowTo:
    [Perform a complete shutdown in Windows 8 | http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm]

    The fact is that Win 8 keeps the laptop but the unit carries out hybrid stop start up more quickly. Unit should be stopped in order to access the BIOS.

    After the unit is OFF, turn on again and press F2.
    Now you should be able to access the BIOS

  • Satellite A55-S1063 - how to access the BIOS?

    How to enter the BIOS on this machine?

    It has a password, and I have the password.
    I looked in the user manual and BIOS is not mentioned.

    Hello!

    A friend of mine has a Satellite A55 and AFAIK you must press ESC to enter the BIOS.

    So please try it and post your result! :)

    Good bye

  • Re: Satellite P100-429 - how to upgrade the BIOS?

    How do install the BIOS after download as I canoe find the beginning of the installation in the downloaded files?

    Any help is appreciated as I am new on this.
    I have a Satellite P100-429 PSPA3E

    You must start the WinPhlash.exe file to start the update of the BIOS.

    In addition, here are some practical info on the update to the BIOS:
    http://www.toshiba-tro.de/biosinfo/

  • Satellite 2800-600 - how to upgrade the Bios/Firmware?

    How can I upgrade the Bios and firmware on my 2800-600? I want to install a new Combodrive. Which drives are supported? Where can I find the drivers and firmware etc... Please let me know. Thank you.

    Another point of view - I bought MS Windows XP Pro and haven´t you have a PC to install it on. Can I install this OS on my Satellite? Will it work? Where can I find the drivers for touchpoint etc etc... Normally, the Toshiba works with Windows ME and I can not use ITunes on ME... if XP would be great - what do you think?

    Hello Jürgen

    In my opinion, if you install the operating system on the unit you you use the recovery CD provided because it has been tested and it works without any problem. But if you want to install another system on your laptop, you can use the original Microsoft OS and all the necessary drivers, you can find the Toshiba site.

    http://EU.computers.Toshiba-Europe.com--> support & downloads

    The update of the BIOS and the important information (i.e. how to upgrade the BIOS) you will find also on the Knowledge Base Web site

    http://support.toshiba-tro.de/KB0/TSB4A00SD000BR01.htm

    Good bye

  • Satellite A110-260 - how to remove the BIOS password

    Hello

    I have a password for the Toshiba Satellite A110-260, but I can't reset the password of the battery

    Please help me!

    How to reset the bios password

    You cannot remove the BIOS password. Something like that is not possible on Toshiba laptops.
    A special procedure is required and this can be done ONLY by a (certified partner) ASP.

    So my advice is to contact the ASP in your country and ask for help!

  • Satellite P50T-A01C - how to enter the BIOS settings?

    Can someone tell me please how to enter the bios on the Satellite P50T-A01C
    I tried fn f2, f10, delete, not go...

    Does anyone know how to get?

    Thanks in advance.

    If you use Win8, you must proceed to a full stop, and then after the new departure enter the BIOS settings.
    Please check - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
    Try to please and post comments.

  • How to configure the BIOS on my computer HP PAvillion of hardware virtualization

    It is a 64-bit computer professional windos 7. I would like to configure the BIOS for virtualization of hardware but cannot find the options to do so. Thank you

    Hello, thank you. I was able to find out how to turn on hardware virtualization for my computer.

    I have a desktop HP Pavilion HPE h9 - 1210t Phoenix PC

    I found the option to enable Virtualization Technology VTx / VTd under the security settings in the Bios.

    While booting, press ESC, then select F10 to go to settings... scroll down until u get to the Security tab and then scroll down to the security of the system menu item. Click on it and it's a simple enable or disable for Virtualization Technology VTx / VTd

    I hope that this help anyone else confused on where to find this option on their similar model HP computer.

  • Satellite Pro 460CDX: how to get the BIOS to recognize the disk external drive port?

    How do you get the BIOS to recognize external floppy port?

    HEEE? ?:|
    Are you sure you know how to update the BIOS?

    Come on cheshire! The update of the BIOS is risky If you n t know how to do!
    Usually, you don't need additional software to recognize the USB FDD drive or driver!

    I hope you have downloaded the good BIOS and use the correct procedure to update BOS, because if you do this in the wrong way to damage the motherboard!
    It is important to first read the BIOS update guide lines! You can find it on the download page of the BIOS under more information

  • Satellite U845W-S400 - how to open the laptop to put it in an SSD

    Hi all

    I would like to know how to open the laptop to put it in an SSD.

    There are 6 screws on the bottom, and I guess that some under the keyboard.

    I don't have a guide but to know for sure where they are before I start prying things open and could even damage it.

    Any help would be really appreciated since I couldn't find anything on the web.

    Kind regards
    Robin

    Stand by.
    You may have a defective stupid question but not SSD inside, or you want to upgrade HDD with SSD?

  • Satellite U940 - cannot start or access the BIOS settings

    I try to help with a HARD on a U940 disk failure. The laptop still works a failure has been (almost certainly) the entire HARD disk.

    I have a new HARD drive in place but I'm unable to access BIOS, and the machine does not start of course. Just a black screen while the computer is trying to do something...

    • Then put the F2 on does not work
    • Then put the F12 on does not work
    • Then put the ESC on does not work
    • Out the battery did not work
    • Out the battery and the power cord and the discharge by pressing the power button / stop for 60 seconds, did not work.

    I can't get to the BIOS. In my view, that the machine was based on the Intel hybrid disc stuff using the DDI in RAID before and this quick book has been activated. Of course, I am unable to clean the machine to stop more since I can't start up with the old drive.

    What I really want to do, is to put everything back. Get rid of any RAID stuff and put Windows on the new HARD drive. Any ideas how I can get into the BIOS to move all of the RAID or FastBoot stuff?

    Posted by devondan
    I try to help with a HARD on a U940 disk failure. The laptop still works a failure has been (almost certainly) the entire HARD disk.

    I have a new HARD drive in place but I'm unable to access BIOS, and the machine does not start of course. Just a black screen while the computer is trying to do something...

    • Then put the F2 on does not work
    • Then put the F12 on does not work
    • Then put the ESC on does not work
    • Out the battery did not work
    • Out the battery and the power cord and the discharge by pressing the power button / stop for 60 seconds, did not work.

    I can't get to the BIOS. In my view, that the machine was based on the Intel hybrid disc stuff using the DDI in RAID before and this quick book has been activated. Of course, I am unable to clean the machine to stop more since I can't start up with the old drive.

    What I really want to do, is to put everything back. Get rid of any RAID stuff and put Windows on the new HARD drive. Any ideas how I can get into the BIOS to move all of the RAID or FastBoot stuff?

    Is it possible to disable hybrid sleep physically? Remove the CMOS battery? Replace the memory? I can't do it from the software or access the BIOS and I wonder if it is what keeps a clean boot.

  • Satellite A200-130 - how to remove the BIOS password?

    Would you help me how to remove the password of the BIOS for the Satellite A200-130 PSAE0E-00Y00YAR model?

    My laptop was asked to enter the password when I put under tension.

    Hello

    Just check this article:
    [How do I remove a BIOS password if I forgot it? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=11]

    As you can see it s not possible to remove the BIOS password. It can only be done from an authorized service provider.

    So, you should contact the guy and ask for help. They are able to remove a password from BIOS :)

  • Satellite L775-130 - how to remove the BIOS password

    Hi, I have a L775-130 satellite whereby you have the bios password and no way to remove, all solutions?

    Thank you all...

    + How do I remove a BIOS password? +
    http://APS2.toshiba-tro.de/KB0/TSB4600PR000JR01.htm

    If you have any questions do not hesitate to post it here ;)

  • Satellite 5105-S607 - how to reset the BIOS password

    I have a Toshiba laptop Satellite 5105-S607 part no PS510U-00NU7X and I lost the password.
    I tried to reset the Bios by disconnecting the battery BIOS and various methods seen on the website, but nothing
    works.

    The methods apply to other models, but this one seems to be missing, can you help me to have to spend a lot of money is not worth the price of the laptop.

    Thank you in advance.

    + You must return the unit to an authorized dealer of Toshiba or Toshiba authorized provider that will remove the password as a service paying +.

    [How to remove BIOS password? | http://APS2.Toshiba-tro.de/KB0/TSB4600PR000JR01.htm]

Maybe you are looking for

  • Features in icloud iPhone 4

    Product name: Iphone 4 My ipone 4 is at 7.1.2 but he lost most of the icloud features after ios 8 including iphone 4 cannot be updated to... What's the deal? I use find my iphone... etc.

  • API for Globals file separate Shared

    Hi all Does anyone know how get the sequence file Globals property file setting in a pragmatic way? I can get most of the other settings in the file of sequence with pragmatism, but this one is cheating on me. I use TestStand v4.2.1 -Jack

  • laptop temperature

    my laptop temperature lights instantly high about 60 to 75 and also consume battery very fast... I'm not use of heavy work as portable games.my is 1 year old... Please tell me what I can do.about 2 or three weeks ago this happan... Please help me as

  • Lollipop 5.1.1 Messaging app contains a wizard?

    Hello Once the upgrade to lollipop 5.1.1 my Xperia Z3 comapct shows something like an assistant when I start the messaging application, that I've never seen in earlier versions. Background: because of the stagefright bug I'm very careful when it come

  • Family blocked Security Site is shown repeatedly in the most visited site on the weekly activity report

    Family blocked Security Site is shown repeatedly in the most visited site on the weekly activity report I'm not able to get on the site using the connection to childhood.  But reports say the blocked site looked at 300 - 500 times.  Even if these are