Satellite U940 - decrease in the life of the battery with Windows update 8.1

Similar Questions

• The problem with Windows update - automatic updates service won't start not (error 126)

  original title: the problem with Windows update

  Please help me to get Windows Update operational return.

  XP Media Center Edition, Version 2002, SP3

  Had a problem with "Generic host process for Win32 has encountered a problem and needs to close."  Follow-up of the instructions on this link:
  http://support.Microsoft.com/kb/931852

  Seems to have cleared the error message.  So far so good.

  However, now a Windows Update does not work.  Security Center Windows were told to go to control panel > system and use the Automatic Updates tab.  But, if I go to control panel > system, the Automatic Updates tab does not appear.

  I also went to the control panel > Services.  Tried to start the automatic updates service.  Received this error message: could not start the service automatic updates on Local computer.  Error 126: The specified module could not be found

  I already followed several instructions on this subject:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cannot-access-Windows-automatic-update-after/aeaec175-01f4-47ed-8F97-55b854af4220

  In the thread above, I was following the post on 30 August.  According to Option A, I completed step 5 for the uninstallation of McAfee Security.  At this time, my network card has stopped working.  On the recommendation of the officer, I posted to the Malwarebytes forum.  The officer determined Malwarebytes that I don't have a malicious software.  I ended up posting on forum McAfee to get my network card works again.  Then I reinstalled McAfee and start to run Windows Update.

  I started with Option A, step 8 to reset Internet Explorer using http://support.microsoft.com/kb/923737.  The difficulty it has worked very well.

  Then Option A, step 9 says reset Windows Update using http://support.microsoft.com/kb/971058.  When I ran the difficulty in default or aggressive mode, I got an error message saying: he cannot start wuauserv.  The message asks me to verify that the user has privileges to take this step.  Well, I checked through user accounts who am the only one user set up on this PC and I have administrator privileges.  Help me please run this difficulty or recommend another way to get Windows Update works again.

  [1]... looks like you are saying that my system is so wet that a clean install is the (only?) way to go.

  [2] if I do a clean install, not only what I need to reinstall Windows and all my applications, I also have to reinstall the drivers... Etc. ?

  [3] I think I have the disks supplied with the PC system. Is it better to use than to use the recovery partitiion?

  [4A]... is there a possibility that some of [my data are] infected?

  [4] preventing me from simply infect the whole PC again?

  A1. Yes, and it was my recommendation in August, too.

  A2. Yes.

  A3. Only not really well using the restore Partition hidden to make the "destructive recovery" will include all drivers, etc., that have been installed at the factory.

  A4a. Yes, a real possibility.

  A4b. You run at least three 3 tests on the backup data before restoring one (1) with your installed & updated up-to-date anti-virus application (for example, Microsoft Security Essentials) and two 2 with good reputation, free online scans (e.g., ESET;) Bit Defender; Kaspersky; HouseCall; (F - Secure).

  If you have saved your data on CD/DVD, the disc scanner. If you have backed up your data to a flash drive, SD card, or another external drive AND KB971029 is installed, analyze the drive.

  If you have any questions or need additional help, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Once again, good luck!

• Satellite L650 - 12K - restore the factory with Windows password settings?

  Hello

  Today I received my new Toshiba Satellite L650 - 12K. I went through the process of "first use" and put in place my name of user and password Windows 7 etc.

  However, after a reboot, when I tried to enter my password to connect to Windows, it says it is incorrect. I tried different combinations of password I used (I know what it's like I wrote it down at the time)-ive tried caps, plugs etc but nothing works.

  If I order the Toshiba recovery disks I will be able to return the laptop to factory settings and start the installation again, including Windows?.

  PS - I only put an account so can't even connect you as another user.

  Thanks for your time and your help.

  Gary2802.

  Hey Buddy,

  Yes, the Toshiba recovery disc can restore the initial configuration (on the box settings) even you don t know the password because it will remove the whole HARD disk and restore the version preinstalled Windows from Toshiba.

  So don t you worry about this, Toshiba Recovery disk will help you! ;)

• How to solve the problem with Windows Update on Windows 7 64 bit Home Premium SP1; Module Windows install encounter error 126, impossible to run/scannow sfs or TrustedInstaller. Help, please

  Hello

  First of all, thank you in advance for any advice for any help, you can offer.

  A week ago I noticed that Windows Update had a backlog of updates (30-40) as I had it value updates but let me choose whether to install them. As I tried to install, I noticed download election for hours but no visible progress in the taskbar and only a few updates installed on restart. Try to check the updates of similar results. I tried a number of solutions suggested here as a tool for troubleshooting Windows Update, but it made that seem to clear my list of updates to uninstall and make sure Windows Update has been under the impression that I had never checked the updates, apparently a worsening of the problem like today no update appeared and I encountered error 8007000D.

  I've tried other options like Windows system update readiness tool and tried to run the sfc/scannow System File Checker, but what who would not (cannot start service repair) I grew more and more worried. On recommendation from other forums, I tried also to start TrustedInstaller in command prompt, which does not. Unfortunately, I had run a Disk Defrag and clean-up recently which had been deleted and (unbeknownst to me) my last restore point. The root of the problem seems to be the Windows Modules Installer, which does not start when you are prompted in Services (error 126), something wrong with the registry may. So reluctantly, I tried to perform a repair installation using a downloaded iso, I burned onto a DVD (insured was also Windows 7 Home Premium 64 - bit SP1). However, even if it doesn't seem to work, it is constantly check for installation updates (unless this is supposed to last several hours?) or if I opt not not to check, it pass the compatibility check and then fail in the second stage (collection of files, settings, and programs). I tried several times, once in offline mode with my disabled (Norton) antivirus and once in clean boot mode.

  I don't know what other options I have. I would like to avoid a clean as much as possible installation, because my computer (HP laptop) still seems to operate normally (for the moment) outside the impossibility to install Windows updates (via Windows Update or directly from Microsoft, it seems), but I think it would just leave vulnerable more and more over time. Has anyone else had similar problems and has found a way to solve? I'm not a computer expert so any help would be greatly appreciated.

  Hello

  Try the troubleshooting steps in this link: error message when you start the service installer of Modules of Windows (TrustedInstaller): "system error 126: the specific module could not be found".

  Let us know how it goes.

• Satellite L750D - Toshiba downgraded the BIOS with an 'update '?

  I just bought my L750D Satellite a few weeks ago and was motivated by additives of Toshiba to update my BIOS. When I did, he said the current version is 1.50 and it has been 'upgraded' to 1.40.

  Is this mean Toshiba downgraded my BIOS?

  If so, should I find a 1.50 download link and re - install this version?

  Thanks for your help.

  Hello

  It is not possible to help you if you put on the template name t mobile post exact or if the model number please check on the Toshiba label placed down and post it here.

• The problem with windows update Language Packs

  JA kada hocu da instaliram neki jezicki paket I kada mi sta pokaze da izaberem sta cu instalirati nema paketi jezicki Windows 7

  Hi Aleksandar,

  Thank you for the update.

  Ideally, when you install a language pack or choose a language other than your system language, most of the functionality is displayed in the language updated the. However, there are some system settings that might still appear in the base language. In this case, we would need install the new operating system choose the language desired. From now on, I suggest you to verify that you have followed the steps exactly as detailed below to select the English language (make sure that the keyboard settings and input methods can also be programmed for the English language pack).

  a. Click Start, control panel to type in the search bar, then click on this Panel.

  b. open the language.

  c. click Add a language and then select the language you want (example: English) and click Open.

  d. now, select a language (example: English (United States).)

  Note: Once you are done with the desired language setting, restart the computer and check.

  Additional information:

  Language packs

  Hope this information is useful.

• Cannot install the printer and windows update error 80070026

  Original title: Registry Editor not work cannot install the printer

  I have Vista the operating system on a Dell laptop with a Core 2 duo, map of Nivea.  Norton Antivirus now after it has started.

  Tried to install the dell printer after uninstalling all printers.   I scan my system using promp... sfc/scannow then I got windows results resource protection found corrupt files but was unable to fix some of the them.details are included in convertible bonds. Journal windir/logs/CBS/CBS.log
  for example:C:/windows/log/cbs/cbs.log

  I looked in the directory C find regedit.exe to rename, but was unable to find it.   I found these if this can help.

  Regedit.exe.4288.dmp
  Regedit.exe.3280.dmp
  Regedit.exe.2292.dmp

  I also got error or popup that without running windows Explorer and then restart it.   I can't install the printer as it pops up and I need to close the program.

  also receive error installer that it is already running
  install GUI is unresponsive

  error code 80070026 during the installation of windows updates.  I open without addons and updates are all to date.

  I'm sorry that there is so much information and error codes.  I think that all what concerns the corrupted files.   Can you help solve c drive please.

  Hello

  1. What is the serial number and model of the printer?
  2. What are the failed updates?
  3 have there been any changes made on the computer before the show?

  I suggest you try the steps to solve the problem with the installation of printer.

  Method 1:
  Run the Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  For more information, see the links:
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
  Search for a printer, the manufacturer Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website
  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  I suggest you try the steps to fix the problem with Windows Update.

  Method 2:
  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 link to return the computer to a Normal startup mode.

  Method 3:
  Temporarily disable the security software.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 4:
  You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
  http://www.Microsoft.com/downloads/en/default.aspx

  For more information, please see the links.

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows

  Warning: An upgrade on the spot is the final solution before you have to reinstall the operating system. Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process

  Hope this information is useful.

• Can satellite L300 - I replace the battery?

  Hello

  I need your help. I have a Toshiba Satellite L300 and I have a problem with the battery, she throws herself into a short period of time. The battery model No. is pa3534u-1brs. I wonder if I can replace this with another battery that lasts more than 2 hours.

  Do you know something about this?
  Can you help me?

  Thanks in advance.

  Hello

  Of course you can replace the battery, why not?
  You can replace the battery with the same or another that is compatible with your laptop.

  I recommend you contact your local authorized service provider. Technicians recommend a battery.

  Alternative find you on the Toshiba page for compatible batteries. A few clicks, you have to do! ;)

• I've corrected the 10 Feb Windows update BSOD issue. What to do next?

  Like many others my infographic died with a BSOD after the windows update Feb10th. Returning the suggested KB977165 had no effect, but fortunately after returning all the updates, my computer is back to life.
  I have now a computer with windows update disabled with an update waiting that I suspect is causing the BSOD again if I turn on updates.
  The various forums etc I found will tell you how to recover your computer on but none that I have found tell me if I can go back to windows update or how carefully remove any update caused the BSOD.
  I haven't tried the "no support for Windows Update problems" for an answer and gave with an automated response telling me to try here.
  Can someone please point me to a 'next steps' to recover completely from this?

  I've heard reports of infected, media files cj. The two movies and songs that have been downloaded through Limewire.  If I hear anything else about it, I will be sure to post it here. All the protection we use still depends on who is using the keyboard or mouse click.

  Suggest that you scan the system with Malwarebytes anti-malware , too.  Download the free version, install and allow update when installed.
  Then click on the button scan and use the default quick scan setting. Once the scan is complete click on the button to display the results.
  If sure all detected object is checked and then click on the button select Remove.
  If nothing is detected, I would start the system into safe mode and do a Full scan, too. It will take time to finish but worth it.

  One way that you would be able to be almost certain to 100% that you have detected and deleted all the bad creatures is to shoot on the hard drive, install it as a slave on another system and then scan the HD active.
  Or you can create a BartsPE or Linux boot cd and the scanner without having to shoot HD.

  Anyway is not elegant, to say the least, and not give the same level of confidence you would have with (ugh) formatting and reinstalling.
  MowGreen Services consumer safety update

• Please replace the battery with the correct lenovo battery

  I have a Thinkpad L530 and bought a new battery and when I start it up I get this message (this battery installed is not supported by this system and will not charge.) Please replace the battery with the battery correct lenovo for this system

  buy a real battery. Press ESC to continue but the battery won't charge)

  I don't want to buy a new battery to another.

  I understand that this can be changed in the bios but don't know how.

  Now my battery is dead, and I'm unable to recharge it again.

  Ideas please

  
  

• CODE 66 has when the update NET FRAMEWORK 4 with WINDOWS UPDATE can't update more far until the issue is resolved. Help, please... I almost tried everything.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  CODE 66 has when the update NET FRAMEWORK 4 with WINDOWS UPDATE can't update more far until the issue is resolved. Help, please... I almost tried everything. Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Take a look at this link and see if it helps-

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3adefda0-69f3-4075-96ee-e2c61bd599cc>

• How can I change the behavior of Windows Update reboot?

  Original title: whenever my computer is a windows update and im on it, my computer shuts down and I lose everything what im working on can it be fixed so that it is not closed?

  computer stops after a windows update while im working on computer! very irritating

  Lady.

  read here:

  Team blog product Microsoft Update: Windows Update and restarting automatic http://blogs.technet.com/mu/archive/2008/10/02/windows-update-and-automatic-reboots.aspx

  Change how Windows installs or informs you about updates http://windows.microsoft.com/en-us/windows7/Change-how-Windows-installs-or-notifies-you-about-updates>

  If you select the download updates but let me choose... option, no update will install without your approval. Suppose an update will require a reboot and does not approve the installation of an update until & unless you are ready to restart.

  You can change the setting "notify only". Once you have done this, you will need to approve the updates are downloaded updates are installed commandeLorsque, which they are installed.

  I prefer "Notify only" setting.

  When they are installed.

  What are the differences between Windows updates and automatic updates from Microsoft Updates?

  While Windows Update provides updates specifically for Windows, Microsoft Update expands the service to download and install updates for other Microsoft software, such as Microsoft Office and Windows Live [as well as Silverlight & Microsoft Security Essentials]. Update automatic is a feature that allows you to configure your PC to automatically download and install updates using each service, making it easy and convenient for you to keep your current Windows PC.

  Source: http://www.microsoft.com/windows/downloads/windowsupdate/FAQ.mspx>

  If you disable Microsoft Update, your default update source is "reversed" update of Windows, but it does NOT neutralize automatic updates.

• Problem with Windows update during the installation of the printer

  I tried several times to install an older printer to the Epson (Stylus Photo 925) on a computer running Windows XP Professional.  When I get to the part of the installation where I select the printer from a list in Windows this printer is not available, so I chose to Windows Update the list.  I've done several times, and the list of Epson printers is actually reduced after selecting the 'Windows Update' button.  Its unusual because a few weeks ago, I did the same configuration for a new machine of Windows 7 and Windows Update added this printer to the list.

  I should add that my printer is on a print server if the installation is a bit more detailed than just plugged in the USB cable and installation.

  If anyone can help with this question?

  Updates required driver from the download page of the device manufacturer or the computer, not Windows Update. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problems with the installation of windows updates and reboot the computer

  When you try to restart the computer it freezes on "installation updates.do not turn off computer.". Currently have 20 updates which will not be installed. computer says CCC.exe prevents the computer from restarting and getting error code 80240016 when you try to install the updates

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/957307

  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not resolve the problem:

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost, are kindly Error Codes and exactly what happens when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00. All options are not enabled. How can I change the time, updates are made? __

  I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00.  All options are not enabled.  How can I change the time that updates are made?

  Hi imoffshore,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  ·         You have security software installed on the computer?

  ·         You get the error message?

  When you open the tab automatic updates in the control panel or My Computer property sheet, all options of configuration of the automatic updates may be grayed out. This happens due to one of the following reasons:

  1. You are not logged as administrator (or equivalent)
  2. Strategy of automatic updates is enabled
  3. Automatic updates (and Windows Update) access is blocked by group policy

  The options available for automatic updates.

  You must make some changes in the windows registry.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  • Click Start, run and type REGEDIT to . EXE
  • Go to this location:

  HKEY_LOCAL_MACHINE-SOFTWARE-policies-Microsoft-Windows------WindowsUpdate------AU

  • In the right pane, delete the two values AUOptions and NoAutoUpdate
  • Go to this location:

  HKEY_CURRENT_USER-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------WindowsUpdate

  • In the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor - for Windows XP Professional

  • Click Start, run and type gpedit.msc
  • Navigate to the following location:

  => Configuration of the computer
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, double-click Configure automatic updates and set it to not configured
  • Next, go to this location:

  => User configuration
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, set to remove access to all Windows Update features on not configured

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.